Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

The vertical structure and stability of alpha model accretion disks

In order to understand the physical processes that determine the time-dependent characteristics of accretion disks, a parameter investigation is conducted of the vertically explicit structure corresponding to steady state, alpha-model thin disk accretion for accreting objects of 1 solar mass. Attention is given to the role of convection in the vertical structure and the location of critical points representing the onset of thermal instability, as well as optically thin conditions. It is shown that the temperature in quiescence is likely to be low for most of the matter, and scaling laws are presented for the fundamental properties of the vertically explicit models from which the time scales for various idealized phenomena are derived. The ordering of three disk time scales obtained should allow discrimination among different models.

Cannizzo, J. K.↗

Structural response of a rotating bladed disk to rotor whirl

A set of high speed rotating whirl experiments were performed in the vacuum of the MIT Blowdown Compressor Facility on the MIT Aeroelastic Rotor, which is structurally typical of a modern high bypass ratio turbofan stage. These tests identified the natural frequencies of whirl of the rotor system by forcing its response using an electromagnetic shaker whirl excitation system. The excitation was slowly swept in frequency at constant amplitude for several constant rotor speeds in both a forward and backward whirl direction. The natural frequencies of whirl determined by these experiments were compared to those predicted by an analytical 6 DOF model of a flexible blade-rigid disk-flexible shaft rotor. The model is also presented in terms of nondimensional parameters in order to assess the importance of the interation between the bladed disk dynamics and the shaft-disk dynamics. The correlation between the experimental and predicted natural frequencies is reasonable, given the uncertainty involved in determining the stiffness parameters of the system.

Crawley, E. F.↗

Accretion disk limit cycle mechanism in twin-degenerate interacting binaries

Accretion disk instability is studied as a possible mechanism causing large variations in the optical light curves of twin-degenerate interacting binary stars. The nonthermal equilibrium limit cycle behavior of the accretion disk expected for such a binary system is explored using a generalized time-dependent, nonthermal equilibrium accretion disk model developed for the study of dwarf novae. A series of bursts is computed for a wide range of values of the secondary mass transfer rate, and the results are presented and discussed.

Cannizzo, J. K.↗

Carbon monoxide isotope ratios in galactic centers and disks

For each of the six galaxies whose mm-wavelength emission of CO and C-13O were observed from both the center and the disk, and the ratio of integrated intensities P(CO)/P(C-13O) is noted to vary markedly from galactic center to galactic center, from galactic disk to galactic disk, and from point to point within a given galaxy. The observed integrated intensity ratios vary from 3 to 16, indicating that the use of a constant P(CO) to sigma(H2) conversion to derive H2 surface densities from extragalactic CO observations can produce major errors.

Rickard, L. J.↗

The wind-disk interaction in X-ray burst sources

The interaction between a radiatively driven wind from the surface of a neutron star and an accretion disk surrounding the star is considered. A bow shock forms if the wind is supersonic when it reaches the inner edge of the disk. The resultant heating of the wind material can enhance the X-ray luminosity of the source, but this effect is important only if the wind is very strong. If the terminal velocity of the wind is at least about 0.99c and the integrated kinetic energy flux of the wind is at least about 30 times the Eddington limit, then super-Eddington X-ray luminosities will be generated. The conditions that are required for the formation of such a wind are briefly discussed. Also developed are estimates for the spectral shape, color temperature, and X-ray luminosity resulting from the wind-disk interaction, and it is shown that these results are consistent with the observed properties of type I cosmic X-ray bursts.

Melia, F.↗

Spinning disk calibration method and apparatus for laser Doppler velocimeter

A method and apparatus for calibrating laser Doppler velocimeters having one or more intersecting beam pairs are described. These velocimeters measure fluid velocity by observing the light scattered by particles in the fluid stream. Moving fluid particulates are simulated by fine taut wires that are radially mounted on a disk that is rotated at a known velocity. The laser beam intersection locus is first aimed at the very center of the disk and then the disk is translated so that the locus is swept by the rotating wires. The radial distance traversed is precisely measured so that the velocity of the wires (pseudo particles) may be calculated.

Snyder, P. K.↗

Dwarf nova burst asymmetry and the physics of accretion disks

Far-ultraviolet observations of a burst of SS Cyg obtained with the Voyager spacecraft are presented along with optical observations. Representative V band and far-UV light curves are computed based on a thermal instability model, and the dependence of the far-UV delay and the shape of the outburst on the location in the disk where the outburst starts is examined. The results show that burst initiated at large radii produce asymmetric light curves for which the far-UV flux lags the optical flux by about half a day, as observed. For bursts starting at smaller radii, the delay is smaller and the outburst is more rounded and symmetric. For both burst types, the delay with respect to the optical is longer for larger accretion disks and at shorter wavelengths. The physical processes that will promote burst initiation in the outer disk are discussed, emphasizing that this can occur in principle with no modulation of the mass transfer rate from the companion.

Cannizzo, J. K.↗

Accretion disks and periodic outbursts of active galactic nuclei

The local thermal stability of accretion disks around supermassive black holes in active galactic nuclei is examined. Such disks are unstable at radii where the surface temperature is several thousand degrees. Supermassive disks therefore should undergo limit-cycle outbursts similar to those believed to occur in dwarf novae. Operating on a time scale of about 10,000 to 10 million yr and at radii of about 10 to the 15th to 10 to the 16th cm, this mechanism will result in alternating periods of higher and lower accretion rate onto the black hole and, consequently, higher and lower luminosity. Quasi-periodic outbursts on this time scale may be recorded in the structure of extended radio sources, a possible example being 4C 29.47. For accretion rates greater than 0.1 solar masses/yr, the situation is complicated by instabilities caused by self-gravitation and by the dominance of radiation pressure and electron scattering opacity.

Lin, D. N. C.↗

Compton-heated winds and coronae above accretion disks. II - Instability and oscillations

The stability and evolution of windy accretion disks is investigated in detail. The basic disk evolution equations are briefly recapitulated, and an idealized analytic treatment of the wind and viscosity is used to show that steady disk flow is indeed unstable for sufficiently large ratio of the mass loss rate in the wind to the central accretion rate. Numerical solutions for a more realistic and appropriate expression for the mass loss rate and the standard ad hoc alpha model prescription for the viscosity are presented. The application of these results to real systems with Compton-heated winds is discussed, and a general formula for the oscillation period is given. The prediction is compared with observed periodic behavior of Galactic X-ray sources and AGNs.

Shields, G. A.↗

Effect of design variables, temperature gradients and speed of life and reliability of a rotating disk

A generalized methodology to predict the fatigue life and reliability of a rotating disk such as used for aircraft engine turbines and compressors is advanced. The approach incorporates the computed life of elemental stress volumes to predict system life and reliability. Disk speed and thermal gradients as well as design variables such as disk diameter and thickness and bolt hole size, number and location are considered.

Zaretsky, E. V.↗

Collisional dynamics of perturbed particle disks in the solar system

Investigations of the collisional evolution of particulate disks subject to the gravitational perturbation of a more massive particle orbiting within the disk are underway. Both numerical N-body simulations using a novel collision algorithm and analytical kinetic theory are being employed to extend our understanding of perturbed disks in planetary rings and during the formation of the solar system. Particular problems proposed for investigation are: (1) The development and testing of general criteria for a small moonlet to clear a gap and produce observable morphological features in planetary rings; (2) The development of detailed models of collisional damping of the wavy edges observed on the Encke division of Saturn's A ring; and (3) The determination of the extent of runaway growth of the few largest planetesimals during the early stages of planetary accretion.

Roberts, W. W.↗

Influence of disk leakage path on labyrinth seal inlet swirl ratio

The results of numerous investigators have shown the importance of labyrinth seal inlet swirl on the calculated dynamic stiffness of labyrinth seals. These results have not included any calculation of inlet leakage swirl as a function of geometry and sealing conditions of the given seal. This paper outlines a method of calculating the inlet swirl at a given seal by introducing a radial chamber to predict the gas swirl as it goes from the stage tip down to the seal location. For a centrifugal compressor, this amounts to including the flow path from the impeller discharge, down the back of the disk or front of the cover, then into the shaft seal or eye packing, respectively. The solution includes the friction factors of both the disk and stationary wall with account for mass flow rate and calculation of radial pressure gradients by a free vortex solution. The results of various configurations are discussed and comparisons made to other published results of disk swirl.

Kirk, R. Gordon↗

Survey of the galactic disk from 1 = -150 deg to 1 = 82 deg in the submillimeter range

The first almost complete survey of the galactic disk from 1 = -150 deg to 1 = 82 deg in the submillimeter range (effective wavelength = 380 microns), performed with the AGLAE balloon-borne instrument modified to include a submillimeter channel, is reported. The instrumentation and observational procedures are described, as are the signal processing and calibration. The results are presented as a profile of the submillimeter brightness of the galactic disk displayed as a function of the galactic longitude. This profile exhibits diffuse emission all along the disk with bright peaks associated with resolved sources. The averaged galactic spectrum is in agreement with a temperature distribution of the interstellar cold dust.

Caux, Emmanuel↗

On the origin of the 40-120 micron emission of galaxy disks: A comparison with H-alpha fluxes

A comparison of 40 to 120 micron Infrared Astronomy Satellite (IRAS) fluxes with published H alpha and UBV photometry shows that the far infrared emission of galaxy disks consists of at least two components: a warm one associated with OB stars in HII-regions and young star-forming complexes, and a cooler one from dust in the diffuse, neutral interstellar medium, heated by the more general interstellar radiation field of the old disk population (a cirrus-like component). Most spiral galaxies are dominated by emission from the cooler component in this model. A significant fraction of the power for the cool component must originate with non-ionizing stars. For a normal spiral disk there is a substantial uncertainty in a star formation rate derived using either the H alpha or the far infrared luminosity.

Persson, Carol J. Lonsdale↗

Formation and evolution of a circumterrestrial disk Constraints on the origin of the moon in geocentric orbit

A data base of about 25,000 numerically integrated trajectories of earth-encountering planetesimals is used to study the angular momentum problem of forming the moon out of material captured into a circumterrestrial disk from heliocentric orbits. Mass-orbital element distributions of incoming planetesimals are combined with this data base to calculate, as a function of distance from earth, the net geocentric specific angular momentum of disk-encountering material on heliocentric orbits. Results suggest that a permanent disk population is not possible.

Herbert, Floyd↗

Timescales for planetary accretion and the structure of the protoplanetary disk

No self-consistent scenario for all stages of planetary accretion which satisfies observational constraints currently exists. An attempt is accordingly made here to resolve the timescale problems and to outline a planet formation scenario consistent with current theories of star formation as well as related models of the protoplanetary disk. For accretion to have proceeded in the manner presently hypothesized, the surface mass density of planetessimals would have had to to be relatively uniform in the Venus-Jupiter region of the protoplanetary disk, consistent with viscous accretion disk models of the solar nebula. The outer regions of the nebula would still have contained enough solid matter to account for the growth of Uranus and Neptune in 5 to 500 million years.

Lissauer, Jack J.↗

A linear thermal stability analysis for the vertical structure of alpha model accretion disks

The linear equations that describe the thermal stability of the convective and radiative vertical structure of an alpha model accretion disk are derived. For a specific model chosen to be representative of a dwarf nova disk, it is found that the eigenfunction for the temperature shows large excursions in the zone of partial ionization, but that the eigenfunctions for the unstable fundamental mode perturbations of the vertical distance and flux are nearly constant over the vertical extent of the disk. The growth of any instability is thus nearly homologous and the stability criteria derived for vertically averaged structures represent an adequate approximation.

Saio, Hideyuki↗

Predicting Life And Reliability Of A Rotating Disk

Report of generalized method for prediction of fatigue life and reliability of rotating disk. Method incorporates computation of life, at given probability of survival, of elemental stressed volumes within body of disk. Effects of design variables, temperature gradients, and speeds examined. Useful in analysis, design, and development of disks for aircraft-engine turbines and compressors and flywheels for industrial and automotive applications.

Zaretsky, Erwin V.↗