Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Optical constants of minerals and rocks

Lorentz line parameters (and estimates of their standard deviations) have been empirically derived from measured reflectance data for muscovite mica, an anorthosite, a diopsidic pyroxenite, an almandite-pyrope garnet, and a soda lime glass. These parameters provide a useful starting point for computer calculations requiring optical constants as a function and are therefore given here. A novel method of fitting the reflectance data by least squares is described in detail, as is the statistical procedure for estimating the standard deviations of the parameters found.

Aronson, J. R.↗

Studies of cluster X-ray sources, energy spectra for the Perseus, Virgo, and Coma clusters

Final Uhuru X-ray differential-energy spectra are presented for the Perseus, Virgo, and Coma clusters. Power-law and isothermal bremsstrahlung model spectra with low-energy cutoffs are given, and the energy-dependent Gaunt factor is calculated for the bremsstrahlung. The spectra, which are best fits to the Uhuru data between 2 and 10 keV, are compared with previous observations of these sources in the energy range from 0.1 to 100 keV. The problem of parameter estimation is discussed, error bars with 68% confidence are given for the independently determined slope and cutoff parameters, and the 68% confidence limits are plotted for the fitted spectral functions. The data for Perseus above 20 keV marginally favor the bremsstrahlung fit, those for Virgo between 0.25 and 1.0 keV clearly favor that curve, and those for Coma indicate a low-energy turnover or cutoff. Implications of such a cutoff are briefly discussed.

Kellogg, E.↗

A study of the dust distribution and extinction law in Mon R2

Observations were obtained at wavelengths from 1.5 to 7.5 microns with beams varying in diameter from 4 to 28 arcsec of infrared hydrogen recombination lines toward the Mon R2 IRS1 H II region. It is found that the data cannot be fitted with the extinction law which characterizes the interstellar medium unless the obscuring matter is clumped on a small scale of not greater than 0.3 arcsec; in which case considerable fluctuations in the amount of extinction on scales smaller than 1 arcsec are expected. The data of Simon et al. (1983) suggest a dip in the extinction about 5 arcsec from the 2-micron and radio continuum peak, and rule out models with uniform dust and clump distributions.

Natta, A.↗

Micrometeoroid Impacts and Optical Scatter in Space Environment

This paper discusses the results of an attempt to use laboratory test data and empirically derived models to quantify the degree of surface damage and associated light scattering that might be expected from hypervelocity particle impacts in space environment. Published descriptions of the interplanetary dust environment were used as the sources of particle mass, size, and velocity estimates. Micrometeoroid sizes are predicted to be predominantly in the mass range 10(exp -5) g or less, with most having diameters near 1 micrometer, but some larger than I20 micrometers, with velocities near 20 kilometers per second. In a laboratory test, latex ( p = 1.1. grams per cubic centimeter) and iron (7.9 grams per cubic centimeter) particles with diameters ranging from 0.75 micrometers to 1.60 micrometers and with velocities ranging from 2.0 kilometers per second to 18.5 kilometers per second, were shot at a Be substrate mirror that had a dielectric coated gold reflecting surface. Scanning electron and atomic force microscopy were used to measure crater dimensions that were then associated with particle impact energies. These data were then fitted to empirical models derived from solar cell and other spacecraft surface components returned from orbit, as well as studies of impact craters studied on glassy materials returned from the lunar surface, to establish a link between particle energy and impact crater dimension. From these data, an estimate of total expected damaged area was computed and this result produced an estimate of expected surface scatter from the modeled environment.

Heaney, James B.↗

Development of a solid propellant viscoelastic dynamic model

The results of a one year study to develop a dynamic response model for the Space Shuttle Solid Rocket Motor (SRM) propellant are presented. An extensive literature survey was conducted, from which it was concluded that the only significant variables affecting the dynamic response of the SRM propellant are temperature and frequency. Based on this study, and experimental data on propellants related to the SRM propellant, a dynamic constitutive model was developed in the form of a simple power law with temperature incorporated in the form of a modified power law. A computer program was generated which performs a least-squares curve-fit of laboratory data to determine the model parameters and it calculates dynamic moduli at any desired temperature and frequency. Additional studies investigated dynamic scaling laws and the extent of coupling between the SRM propellant and motor cases. It was found, in agreement with other investigations, that the propellant provides all of the mass and damping characteristics whereas the case provides all of the stiffness.

Hufferd, W. L.↗

Are the Viking Lander sites representative of the surface of Mars?

Global remote sensing data of the Martian surface, collected by earth- and satellite-based instruments, are compared with data from the two Viking Landers to determine if the Lander data are representative of the Martian surface. The landing sites are boulder-strewn and feature abundant fine material and evidence of strong eolian forces. One site (VL-1) is in a plains-covered basin which is associated with volcanic activity; the VL-2 site is in the northern plains. Thermal IR, broadband albedo, color imaging and radar remote sensing has been carried out of the global Martian surface. The VL-1 data do not fit a general correlation observed between increases in 70-cm radar cross-sections and thermal inertia. A better fit is found with 12.5-cm cross sections, implying the presence of a thinner or discontinuous duricrust at the VL-1 site, compared to other higher-inertia regions. A thin dust layer is also present at the VL-2 site, based on the Lander reflectance data. The Lander sites are concluded to be among the three observed regions of anomalous reflectivity, which can be expected in low regions selected for the landings. Recommendations are furnished for landing sites of future surface probes in order to choose sites more typical of the global Martian surface.

Jakosky, B. M.↗

Cyclotron line strength variations in gamma-ray burst GB870303 - Possible evidence of neutron star rotation

An exhaustive search of the Ginga data on gamma-ray burst GB870303 reveals two separate time intervals during which statistically significant line features are evident. One interval shows a single prominent line feature at about 20 keV; a second, shows two line features at about 20 and 40 keV. From model fits to the data, we find that both sets of lines are well-described by cyclotron resonant scattering in a magnetic field B about 1.8 x 10 exp 12 G, and that the differences in the line strengths between the two intervals are significant. The variations are qualitatively similar to those produced by a change in the viewing angle theta relative to the magnetic field. We conjecture that the change in theta is due to rotation of the neutron star, and derive limits P = 45-180 sec on the rotation period P.

Graziani, Carlo↗

Mechanical and swelling behaviour of well characterized polybutadiene networks

Endlinking of hydroxyl-terminated polybutadiene with the appropriate isocyanate has been used to prepare well characterized networks. Two networks have been studied with molecular weights of the prepolymers being 6100 and 2400 g/mole by g.p.c. Cylindrical specimens were prepared and the derivatives of the stored energy function with respect to the stretch invariants were determined by torque and normal force measurements in torsion. From these data the Valanis-Landel (1967) stored energy function derivatives w-prime(lambda) were determined for both networks. The stored energy function for the junction constraint model of Flory (1953, 1977, 1979, 1985) which is a special form of the Valanis-Landel function, has been fitted to that determined from the experiments. The contributions to the stored energy function from the phantom network and from the junction constraints respectively do not agree with predictions from the topologies of the networks. In spite of this, the form of w-prime(lambda) for the junction constraint model gives an excellent 'curve fit' to the data. Comparison is also made with equilibrium swelling.

Mckenna, Gregory B.↗

Small-scale fluctuations and angular correlations of the X-ray background in the HEAO 1 A-2 energy band - Constraints on clustering of X-ray sources

HEAO 1 A-2 all-sky survey data have been used to determine the amplitude of intensity fluctuations of the extragalactic 2-10 keV X-ray background (XRB) over an effective solid angle of 1.84 sq deg and their angular correlation function on angular scales of less than 3 deg. A good empirical fit to the data is obtained assuming that the integral counts in the A-2 band have a slope of 1.65 + 0.06 or - 0.07. Alternatively, the data may imply a significant clustering of extragalactic X-ray sources.

Martin-Mirones, J. M.↗

Stochastic Models of Tropical Rain-Rate Fields

Because of the extreme variability of rain rate in space and time and the difficulties with remote sensing methods of measuring rain rates, accurate determination of rainfall over large areas and time periods has long been a problem for hydrologists, meteorogists, and climatologists. A number of statistical models of rain have been developed in order to investigate the impact of rain variability on satellite remote sensing methods, validation of satellite rain products, and generation of rain maps with accompanying error estimates. These models may be useful in examining 'sub-grid scale' issues in representing precipitation in numerical mdoels. A stochastic model will first be described which can generate time-dependent high-resolution spatial rain fields with space and time correlations similar to those seen in rain data, as well as representing the presence of areas with zero rain rate and log-normally distributed rain rates where there is rain. A simpler model derived from this, formulated in the spectral domain, seems to imply fractal-like rain statistics at small scales when fit to rain data.

Bell, Thomas L.↗

Aboveground biomass density models for NASA’s Global Ecosystem Dynamics Investigation (GEDI) lidar mission

NASA’s Global Ecosystem Dynamics Investigation (GEDI) is collecting spaceborne full waveform lidar data with a primary science goal of producing accurate estimates of forest aboveground biomass density (AGBD). This paper presents the development of the models used to create GEDI’s footprint-level (~25 m) AGBD (GEDI04_A) product, including a description of the datasets used and the procedure for final model selection. The data used to fit our models are from a compilation of globally distributed spatially and temporally coincident field and airborne lidar datasets, whereby we simulated GEDI-like waveforms from airborne lidar to build a calibration database. We used this database to expand the geographic extent of past waveform lidar studies, and divided the globe into four broad strata by Plant Functional Type (PFT) and six geographic regions. GEDI’s waveform-to-biomass models take the form of parametric Ordinary Least Squares (OLS) models with simulated Relative Height (RH) metrics as predictor variables. From an exhaustive set of candidate models, we selected the best input predictor variables, and data transformations for each geographic stratum in the GEDI domain to produce a set of comprehensive predictive footprint-level models. We found that model selection frequently favored combinations of RH metrics at the 98th, 90th, 50th, and 10th height above ground-level percentiles (RH98, RH90, RH50, and RH10, respectively), but that inclusion of lower RH metrics (e.g. RH10) did not markedly improve model performance. Second, forced inclusion of RH98 in all models was important and did not degrade model performance, and the best performing models were parsimonious, typically having only 1-3 predictors. Third, stratification by geographic domain (PFT, geographic region) improved model performance in comparison to global models without stratification. Fourth, for the vast majority of strata, the best performing models were fit using square root transformation of field AGBD and/or height metrics. There was considerable variability in model performance across geographic strata, and areas with sparse training data and/or high AGBD values had the poorest performance. These models are used to produce global predictions of AGBD, but will be improved in the future as more and better training data become available.

Laura Duncanson↗

Determination of rotor harmonic blade loads from acoustic measurements

The magnitude of discrete frequency sound radiated by a rotating blade is strongly influenced by the presence of a nonuniform distribution of aerodynamic forces over the rotor disk. An analytical development and experimental results are provided for a technique by which harmonic blade loads are derived from acoustic measurements. The technique relates, on a one-to-one basis, the discrete frequency sound harmonic amplitudes measured at a point on the axis of rotation to the blade-load harmonic amplitudes. This technique was applied to acoustic data from two helicopter types and from a series of test results using the NASA-Langley Research Center rotor test facility. The inferred blade-load harmonics for the cases considered tended to follow an inverse power law relationship with harmonic blade-load number. Empirical curve fits to the data showed the harmonic fall-off rate to be in the range of 6 to 9 db per octave of harmonic order. These empirical relationships were subsequently used as input data in a compatible far field rotational noise prediction model. A comparison between predicted and measured off-axis sound harmonic levels is provided for the experimental cases considered.

Kasper, P. K.↗

Assessment of Uncertainty in the Determination of Activation Energy for Polymeric Materials

An assessment of the experimental uncertainty in obtaining the kinetic activation energy from thermogravimetric analysis (TGA) data is presented. A neat phenolic resin, Borden SC1O08, was heated at three heating rates to obtain weight loss vs temperature data. Activation energy was calculated by two methods: the traditional Flynn and Wall method based on the slope of log(q) versus 1/T, and a modification of this method where the ordinate and abscissa are reversed in the linear regression. The modified method produced a more accurate curve fit of the data, was more sensitive to data nonlinearity, and gave a value of activation energy 75 percent greater than the original method. An uncertainty analysis using the modified method yielded a 60 percent uncertainty in the average activation energy. Based on this result, the activation energy for a carbon-phenolic material was doubled and used to calculate the ablation rate In a typical solid rocket environment. Doubling the activation energy increased surface recession by 3 percent. Current TGA data reduction techniques that use the traditional Flynn and Wall approach to calculate activation energy should be changed to the modified method.

Darby, Stephania P.↗

System Identification for eVTOL Aircraft Using Simulated Flight Data

This paper describes a system identification method for electric vertical takeoff and landing (eVTOL) aircraft. The approach merges fixed-wing and rotary-wing modeling techniques with new strategies to develop a modeling method for eVTOL vehicles using flight test data. The eVTOL aircraft system identification approach is demonstrated through application to the NASA LA-8 tandem tilt-wing, distributed electric propulsion aircraft using a high-fidelity flight dynamics simulation. Orthogonal phase-optimized multisine inputs are applied to each control surface and propulsor at numerous flight conditions throughout the flight envelope to collect informative flight data. An aero-propulsive model is identified at each flight condition using the equation-error method in the frequency domain. The local model parameters are then blended to create a global model across the nominal flight envelope. Parameter estimation results are shown to provide a good fit to modeling data and have good prediction capability. The methodology is developed with a discussion of unique eVTOL vehicle aerodynamic characteristics and practical strategies intended to inform future flight-based system identification efforts for eVTOL aircraft.

system identification↗

Passage of Bolides Through the Atmosphere

Different fragmentation models are applied to a number of events, including the entry of TC3 2008 asteroid in order to reproduce existing observational data. Keywords meteoroid entry fragmentation modeling 1 Introduction Fragmentation is a very important phenomenon which occurs during the meteoroid entry into the atmosphere and adds more drastic effects than mere deceleration and ablation. Modeling of bolide fragmentation (100 106 kg in mass) may be divided into several approaches. Detail fitting of observational data (deceleration and/or light curves) allows the determination of some meteoroid parameters (ablation and shape-density coefficients, fragmentation points, amount of mass loss) (Ceplecha et al. 1993; Ceplecha and ReVelle 2005). Observational data with high accuracy are needed for the gross-fragmentation model (Ceplecha et al. 1993), which is used for the analysis of European and Desert bolide networks data. Hydrodynamical models, which describe the entry of the meteoroid including evolution of its material, are applied mainly for large bodies (>106 kg) (Boslough et al. 1994; Svetsov et al. 1995; Shuvalov and Artemieva 2002, and others). Numerous papers were devoted to the application of standard equations for large meteoroid entry in the attempts to reproduce dynamics and/or radiation for different bolides and to predict meteorite falls. These modeling efforts are often supplemented by different fragmentation models (Baldwin and Sheaffer, 1971; Borovi.ka et al. 1998; Artemieva and Shuvalov, 2001; Bland and Artemieva, 2006, and others). The fragmentation may occur in different ways. For example, few large fragments are formed. These pieces initially interact through their shock waves and then continue their flight independently. The progressive fragmentation model suggests that meteoroids are disrupted into fragments, which continue their flight as independent bodies and may be disrupted further. Similar models were suggested in numerous papers, beginning with Levin (1956) and initial interaction of fragments started to be taken into account after the paper by Passey and Melosh (1980). The progressive fragmentation model with lateral spreading of formed fragments is widely used (Artemieva and Shuvalov, 1996; Nemtchinov and Popova, 1997; Borovi.ka et al. 1998; Bland and Artemieva, 2006).

Popova, O.↗

PolyFit: A C++ code for Polynomial Curve Fit with Calculation of Error Bars

In radiobiology, many dose-response results are modeled using the so-called linear-quadratic(LQ)model, which means that results are modeled as a function of dose Das 𝑅(𝐷)=𝛽0+𝛽1𝐷+𝛽2𝐷2. The coefficients 𝛽0, 𝛽1and 𝛽2are obtained from fitting a series of data points (𝑥𝑖,𝑦𝑖), which is usually done using a least-square method. The LQ and more generally the polynomial fit capability is implemented in many software that analyzes data. However, it is often convenient to do the fitting programmatically, especially when a large number of datasets should be analyzed. Furthermore, depending on the software used, some features may not be implemented. In this mini-review, I discuss the basis of polynomial fitting, including the calculation of errors on the coefficients and results, use of weighting and fixing the intercept value (the coefficient 𝛽0). A simple C++ code to perform the polynomial curve fitting is also provided. This code should be useful not only in radiobiology but in other fields of science as well.

Ianik Plante↗

Long-term, hard X-ray observations of Scorpius X-1 from HEAO 1

The results of observations of Sco X-1 from three separate scanning epochs during 1977 and 1978 by the UCSD/MIT instruments aboard HEAO 1 in the 15-200 keV range are reported. Intensity and spectral variations have been studied on three time scales: 33-minute scans, daily averages, and weekly averages. No relationship was found between intensity and temperature over the very narrow range of temperatures observed, but comparison of the variability of the intensity, emission measure, and temperature implies at least two different emission mechanisms are at work. It is found that the spectral data are best fitted by either a thin-thermal-bremsstrahlung model of about 5 keV or a Comptonized thermal model of temperature about 3 keV. At higher energies (50-200 keV), no flux is found in excess of the thermal (as claimed by previous observers), and a 2-sigma upper limit from scanning data of 10 to the -5th photons/sq cm sec keV is set. This is an order of magnitude lower than reported detections. Using the distance derived from optical and UV measurements, X-ray luminosities from Sco X-1 incompatible with predictions for spherical accretion onto a white dwarf and emission volumes inconsistent with polar caps of white dwarfs are found.

Soong, Y.↗

Limits on coronal reflection using high-frequency solar oscillations

Acoustic waves in the Sun with frequencies above about 5.3 mHz can propagate in the chromosphere. We examine imaged solar intensity data for evidence of reflection of these waves in the upper chromosphere, where the temperature increases by a large factor over a short distance. Our method is to compare the observed and theoretically derived frequency spacings between peaks in the power spectrum. We find that our theoretical frequencies provide the best fit to the data when the reflection in the upper atmosphere is eliminated. In particular, the model of Kumar (1993b), which includes the source depth, and radiative damping, in the calculation of power spectra but ignores chromospheric reflection, gives peak frequencies that are in good agreement with the observations. For acoustic waves of frequency greater than 6 mHz we put an upper limit to the reflectivity of chromosphere and corona, using our method, of about 10%. At a given spherical harmonic degree, the frequency spacing between peaks in the data generally decreases with increasing frequency, because the lower turning point of the waves is moving inward. However, between 5 and 5.5 mHz the frequency spacing increases slightly. This feature is probably associated with the acoustic cutoff frequency in the solar atmosphere, i.e., it indicates a transition from trapped waves to propagating waves. We are able to reproduce the observed behavior by a crude modeling of the solar atmosphere. Further study of these peaks should provide an independent way of exploring the mean structure of the solar atmosphere, particularly around the temperature minimum region.

Kumar, P.↗