Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Critical review of electrical conductivity measurements and charge distribution analysis of magnesium oxide

The electrical conductivity sigma of MgO single crystals shows a sharp increase at 500-800 C, in particular of sigma surface, generally attributed to surface contamination. Charge Distribution Analysis (CDA), a new technique providing information on fundamental properties that was previously unavailable, allows for the determination of surface charges, their sign and associated internal electric field. Data on 99.99% purity, arc-fusion grown MgO crystals show that mobile charge carriers start to appear in the bulk of the MgO crystals between 200 and 400 C when sigma (measured by conventional techniques) is in t he 10(exp -14) to 10(exp -16) /omega/cm range. Above 500 C, as sigma increases to 10(exp -6) to 10(exp -7)/omega/cm, more charges appear giving rise to a strong positive surface charge supported by a strong internal field. This indicates that charges are generated in the bulk and diffuse to the surface by an internally controlled process. On the basis of their positive sign they are identified as holes (defect electrons). Because of the low cation content of these very pure MgO crystals, theses holes cannnot be associated with transition metal impurties. Instead, they are associated with the O(2-) sublattice, e.g. consist of O(-) states or positive holes. This conclusion is supported by magnetic susceptibility data showing the appearance of 1000 +/- 500 ppm paramagnetic species between 200-500 C. The magnetic data are consistent with strongly coupled, diamagnetic O(-) pairs below 200-500 C, chemically equivalent to peroxy anions, O2(2-), and probably associated with cation vacancies in the MgO matrix. The formation of O2(2-) in arc-fusion grown MgO crystals is very unexpected because of the highly reducing growth conditions. Their presence implies an internal redox reaction involving dissolved 'water' by which OH(-) pairs convert to O2(2-) plus H2 molecules. This redox conversion is supported by mass spectroscopic measurements of the H2 release from highly OH(-)-doped, finely divided MgO and by wet-chemical analysis of its oxidant concentration.

Freund, Friedemann↗

Implications of Dynamic Pressure Transducer Mounting Variations on Measurements in Pyrotechnic Test Apparatus

Accurate dynamic pressure measurements are often difficult to make within small pyrotechnic devices, and transducer mounting difficulties can cause data anomalies that lead to erroneous conclusions. Delayed initial pressure response followed by data ringing has been observed when using miniaturized pressure transducer mounting adapters required to interface transducers to small test chambers. This delayed pressure response and ringing, combined with a high data acquisition rate, has complicated data analysis. This paper compares the output signal characteristics from different pressure transducer mounting options, where the passage distance from the transducer face to the pyrotechnic chamber is varied in length and diameter. By analyzing the data and understating the associated system dynamics, a more realistic understanding of the actual dynamic pressure variations is achieved. Three pressure transducer mounting configurations (elongated, standard, and face/flush mount) were simultaneously tested using NASA standard initiators in closed volume pressure bombs. This paper also presents results of these pressure transducer mounting configurations as a result of a larger NASA Engineering and Safety Center pyrovalve test project. Results from these tests indicate the improved performance of using face/flush mounted pressure transducers in this application. This type of mounting improved initial pressure measurement response time by approximately 19 s over standard adapter mounting, eliminating most of the lag time; provided a near step-function type initial pressure increase; and greatly reduced data ringing in high data acquisition rate systems. The paper goes on to discuss other issues associated with the firing and instrumentation that are important for the tester to understand.

Dibbern, Andreas↗

Clumpy Langmuir waves in type III solar radio bursts

A model is developed for type III radio emission in the interplanetary medium based on recent data on Langmuir waves, associated with ion sound waves, density fluctuations in the interplanetary plasma, streaming electrons and radio emission. In this model, Langmuir wave growth is suppressed by refraction in field-aligned density irregularities except near density minima where clumps of Langmuir waves form. Quasi-linear relaxation limits the growth of the Langmuir waves in the clumps. The radio emission, which is attributed to coalescence of the Langmuir waves with associated ion sound waves, saturates at a brightness temperature equal to the effective temperature of the Langmuir waves, estimated to be between 10 to the 15th and 10 to the 16th K from obserrvational data. The model is consistent with all the relevant data on type III events. In particular, it accounts naturally for observed brightness temperatures of type III bursts.

Melrose, D. B.↗

Tools for Basic Statistical Analysis

Statistical Analysis Toolset is a collection of eight Microsoft Excel spreadsheet programs, each of which performs calculations pertaining to an aspect of statistical analysis. These programs present input and output data in user-friendly, menu-driven formats, with automatic execution. The following types of calculations are performed: Descriptive statistics are computed for a set of data x(i) (i = 1, 2, 3 . . . ) entered by the user. Normal Distribution Estimates will calculate the statistical value that corresponds to cumulative probability values, given a sample mean and standard deviation of the normal distribution. Normal Distribution from two Data Points will extend and generate a cumulative normal distribution for the user, given two data points and their associated probability values. Two programs perform two-way analysis of variance (ANOVA) with no replication or generalized ANOVA for two factors with four levels and three repetitions. Linear Regression-ANOVA will curvefit data to the linear equation y=f(x) and will do an ANOVA to check its significance.

Luz, Paul L.↗

Statistical model to perform error analysis of curve fits of wind tunnel test data using the techniques of analysis of variance and regression analysis

The considered research had the objective to design a statistical model that could perform an error analysis of curve fits of wind tunnel test data using analysis of variance and regression analysis techniques. Four related subproblems were defined, and by solving each of these a solution to the general research problem was obtained. The capabilities of the evolved true statistical model are considered. The least squares fit is used to determine the nature of the force, moment, and pressure data. The order of the curve fit is increased in order to delete the quadratic effect in the residuals. The analysis of variance is used to determine the magnitude and effect of the error factor associated with the experimental data.

Alston, D. W.↗

A System to Provide Deterministic Flight Software Operation and Maximize Multicore Processing Performance: The Safe and Precise Landing – Integrated Capabilities Evolution (SPLICE) Datapath

A method and design are described for a system that processes multiple data streams, utilizing a multicore asymmetric processing architecture, that eliminates data interrupts to the application processors. The design supports a deterministic environment for flight software in NASA’s Safe and Precise Landing – Integrated Capabilities Evolution (SPLICE) project. The SPLICE project develops sensor, algorithm, and compute technologies for Precision Landing and Hazard Avoidance (PL&HA) capabilities. The compute technology for SPLICE is the Descent and Landing Computer (DLC). The DLC hosts several SPLICE algorithms with high computational resource requirements that must be executed in a real-time and deterministic manner. The software runs on a custom Single Board Computer (SBC), with a Xilinx Ultrascale+ Multiprocessor System-on-a-Chip (MPSoC). Input data for the flight software is from a variety of sensors, unique with respect to data rate and packet size. A data path between the SPLICE sensors and algorithms is designed to efficiently deliver this data to the flight software using the MPSoC asymmetric processing cores and Field Programmable Gate Array (FPGA) fabric. This is implemented in a manner that isolates the application processors running the flight software from interrupts associated with the input data. By leveraging real-time processors on the MPSoC, and a structure with the appropriate interfaces in the shared memory on the SBC, the flight software can use the full set of application processors. The available utilization for each processor in this set is also maximized for the SPLICE applications, providing a sufficiently deterministic execution environment without the cost and overhead of a real-time operating system.

heterogeneous processing system↗

A System to Provide Deterministic Flight Software Operation and Maximize Multicore Processing Performance: The Safe and Precise Landing – Integrated Capabilities Evolution (SPLICE) Datapath

A method and design are described for a system that processes multiple data streams, utilizing a multicore asymmetric processing architecture, that eliminates data interrupts to the application processors. The design supports a deterministic environment for flight software in NASA’s Safe and Precise Landing – Integrated Capabilities Evolution (SPLICE) project. The SPLICE project develops sensor, algorithm, and compute technologies for Precision Landing and Hazard Avoidance (PL&HA) capabilities. The compute technology for SPLICE is the Descent and Landing Computer (DLC). The DLC hosts several SPLICE algorithms with high computational resource requirements that must be executed in a real-time and deterministic manner. The software runs on a custom Single Board Computer (SBC), with a Xilinx Ultrascale+ Multiprocessor System-on-a-Chip (MPSoC). Input data for the flight software is from a variety of sensors, unique with respect to data rate and packet size. A data path between the SPLICE sensors and algorithms is designed to efficiently deliver this data to the flight software using the MPSoC asymmetric processing cores and Field Programmable Gate Array (FPGA) fabric. This is implemented in a manner that isolates the application processors running the flight software from interrupts associated with the input data. By leveraging real-time processors on the MPSoC, and a structure with the appropriate interfaces in the shared memory on the SBC, the flight software can use the full set of application processors. The available utilization for each processor in this set is also maximized for the SPLICE applications, providing a sufficiently deterministic execution environment without the cost and overhead of a real-time operating system.

David K. Rutishauser↗

On the Predictability of Substorms Following Sharp Northward Turnings of the IMF

It has been shown that there is an association between changes of the interplanetary magnetic field (IMF) that are expected to lead to a reduction in magnetospheric convection (northward turnings, reductions) and the onset of the expansion phase of substorms. This has been previously demonstrated by analyses of IMF data during time intervals associated with identified substorm onsets. Here we examine whether observations of northward turnings of the IMF can be used to predict the occurrence of substorms. We first identified sharp northward turnings that follow an interval of steady, southward IMF using measurements from the Wind spacecraft during the first 180 days of 1997. We also required that the northward turning be observed by either IMP-8 or GEOTAIL, in addition to Wind, and that one of the observing satellites be sufficiently close to the Earth-Sun line, or that the two observing satellites be sufficiently separated, that we are reasonably certain that the northward turning affected the magnetosphere. We also used the dual observations to estimate the arrival of the northward turning at the Earth. Using these criteria, we predicted 17 substorms. We then searched for the following signatures of substorm onset around the time of the predicted onset: auroral brightening followed by auroral bulge expansion observed by Polar UVI, geosynchronous particle injection, geosynchronous magnetic field dipolarization, and an appropriate magnetic disturbance at the surface of the Earth. Of the 17 predictions of substorms, 10 were successful in that a substorm onset was observed within 12 min of the predicted onset, 1 is indeterminate due to a lack of data at the Earth, 1 had unusual activity that we have not been able to identify, and 5 were unsuccessful. The failure of these last 5 predictions is explicable. Two of the northward turnings that failed to produce substorms were preceded by the lowest average of the set. The remaining 3 were the only cases in which the northward turning was accompanied by a simultaneous sharp increase. The increase would be expected to offset the decrease in convection that would otherwise be expected to be associated with a northward turning. These results indicate that it is an IMF change that leads to a reduction in convection, rather than just a northward turning or reduction that is associated with substorms, and that at least some substorms can be predicted by measurements of the IMF.

Blanchard, G. T.↗

Satellite-based Estimates of Ambient Air Pollution and Global Variations in Childhood Asthma Prevalence

Background: The effect of ambient air pollution on global variations and trends in asthma prevalence is unclear. Objectives: Our goal was to investigate community-level associations between asthma prevalence data from the International Study of Asthma and Allergies in Childhood (ISAAC) and satellite-based estimates of particulate matter with aerodynamic diameter < 2.5 microm (PM2.5) and nitrogen dioxide (NO2), and modelled estimates of ozone. Methods: We assigned satellite-based estimates of PM2.5 and NO2 at a spatial resolution of 0.1deg × 0.1deg and modeled estimates of ozone at a resolution of 1deg × 1deg to 183 ISAAC centers. We used center-level prevalence of severe asthma as the outcome and multilevel models to adjust for gross national income (GNI) and center- and country-level sex, climate, and population density. We examined associations (adjusting for GNI) between air pollution and asthma prevalence over time in centers with data from ISAAC Phase One (mid-1900s) and Phase Three (2001-2003). Results: For the 13- to 14-year age group (128 centers in 28 countries), the estimated average within-country change in center-level asthma prevalence per 100 children per 10% increase in center-level PM2.5 and NO2 was -0.043 [95% confidence interval (CI): -0.139, 0.053] and 0.017 (95% CI: -0.030, 0.064) respectively. For ozone the estimated change in prevalence per parts per billion by volume was -0.116 (95% CI: -0.234, 0.001). Equivalent results for the 6- to 7-year age group (83 centers in 20 countries), though slightly different, were not significantly positive. For the 13- to 14-year age group, change in center-level asthma prevalence over time per 100 children per 10% increase in PM2.5 from Phase One to Phase Three was -0.139 (95% CI: -0.347, 0.068). The corresponding association with ozone (per ppbV) was -0.171 (95% CI: -0.275, -0.067). Conclusion: In contrast to reports from within-community studies of individuals exposed to traffic pollution, we did not find evidence of a positive association between ambient air pollution and asthma prevalence as measured at the community level.

Air pollution↗

Observations of gamma-ray emission in solar flares

Solar flare associated gamma ray observations are reviewed. Data cover He-3, line emission, and absolute intensity associated with gamma ray production. Results are given in graphs and tables.

Forrest, D. J.↗

Time-varying oscillations in the solar soft X-ray flux as observed from Skylab

Observations obtained by the Skylab/Apollo telescope S-056 X-ray experiment were used to study the time-varying oscillations in the solar soft X-ray flux during a flare. The observations consisted of count rates measured every 2.5 s by sealed, gas-filled counters operating over the 2.5-7.25-A and 6.1-20.0-A wavelength ranges. The power spectra for two other intervals were computed to determine whether the observed oscillations were flare-associated or instrumental in origin. The data indicate that the oscillations in the flare-associated X-ray flux are caused by waves which are generated during the flare and which periodically increase the electron density. No oscillations were observed during quiet periods.

Teuber, D. L.↗

New interpretations of shock-associated noise with and without screech

Anomalous trends in present convergent nozzle (Mach 1) shock associated noise analyses and predictions, with particular emphasis on the roles of screech and jet temperature, are discussed. Experimentally measured values of shock associated noise are used to reassess data trends, including both frequency and sound pressure level. The data used includes model-scale nozzles, varying in nominal diameter from 5 cm to 13 cm, and full scale engine nozzles up to 48 cm. All data were obtained at static conditions. From this reassessment of the measured data, new empirical methods for the prediction of shock associated noise are developed. Separate procedures are presented for screech free and screech contaminated shock associated noise. In the present approach, shock associated noise spectra are developed from considerations that include the peak sound pressure level and its frequency, the low frequency sound pressure level slope, and the high frequency sound pressure level slope or roll-off; the latter is shown to vary with directivity angle.

Vonglahn, U.↗

Detection and mapping of volcanic rock assemblages and associated hydrothermal alteration with Thermal Infrared Multiband Scanner (TIMS) data Comstock Lode Mining District, Virginia City, Nevada

Thermal Infrared Multispectral Scanner (TIMS) data were acquired over the Virginia City area on September 12, 1984. The data were acquired at approximately 1130 hours local time (1723 IRIG). The TIMS data were analyzed using both photointerpretation and digital processing techniques. Karhuen-Loeve transformations were utilized to display variations in radiant spectral emittance. The TIMS image data were compared with color infrared metric camera photography, LANDSAT Thematic Mapper (TM) data, and key areas were photographed in the field.

Taranik, James V.↗

Propagation of solar flare-associated interplanetary shock waves in the heliospheric meridional plane

An analysis is conducted for 149 flare-associated shock wave events based on interplanetary scintillation observational data. All of the flare-associated shock waves tend to propagate toward the low latitude region near the solar equator for flares that are located in both the solar Northern and Southern Hemispheres. Also, the fastest propagation directions tend toward the heliospheric current sheet near 1 AU. This tendency is caused by the dynamic action of near-sun magnetic forces on the ejected coronal plasma that traverses the helmet-like magnetic topologies near the sun outward to the classical topology that is essentially parallel to the heliospheric current sheet.

Wei, Fengsi↗

ArcGIS Digitization of Apollo Surface Traverses

The Apollo surface activities were documented in extraordinary detail, with every action performed by the astronauts while on the surface recorded either in photo, audio, film, or by written testimony [1]. The samples and in situ measurements the astronauts collected while on the lunar surface have shaped our understanding of the geologic history of the Moon, and the earliest history and evolution of the inner Solar System. As part of an ongoing LASERfunded effort, we are digitizing and georeferencing data from astronaut traverses and spatially associating them to available, co-registered remote sensing data. Here we introduce the products produced so far for Apollo 15, 16, and 17 missions.

Petro, N. E.↗

Satellite Data Reveals a Recent Increase in Shifting Cultivation and Associated Carbon Emissions in Laos

Although shifting cultivation is the major land use type in Laos, the spatial-temporal patterns and the associated carbon emissions of shifting cultivation in Laos are largely unknown. This study provides a nationwide analysis of the spatial-temporal patterns of shifting cultivation and estimations of the associated carbon emissions in Laos over the last three decades. This study found that shifting cultivation has been expanding and intensifying in Laos, especially in the last five years. The newly cultivated land from 2016-2020 accounted for 4.5% (±1.2%) of the total land area of Laos. Furthermore, the length of fallow periods has been continuously declining, indicating that shifting cultivation is becoming increasingly intensive. Combining biomass derived from GEDI (Global Ecosystem Dynamics Investigation) and shifting cultivation maps and area estimates, we found that the net carbon emissions from shifting cultivation declined in 2001-2015 but increased in 2016-2020. The largest carbon source is conversion from intact forests to shifting cultivation, which contributed to 89% of the total emissions from 2001 to 2020. In addition, there were increased emissions from intensified use of fallow land. This research provides useful information for policymakers in Laos to understand the changes in shifting cultivation and improve land use management. This study not only supports REDD+ (Reducing Emissions from Deforestation and forest Degradation) reporting for Laos but also provides a methodology for tracking carbon emissions and removals of shifting cultivation.

Shifting cultivation↗

Calcium and Bone Homeostasis During 4-6 Months Space Flight

Bone and calcium homeostasis are altered by weightlessness. We previously reported calcium studies on three subjects from the first joint US/Russian mission to Mir. We report here data on an additional three male subjects, whose stays on Mir were 4 (n= 1) and 6 (n=2) mos. Data were collected before, during, and after the missions. Inflight studies were conducted at 2-3 mos. Endocrine and biochemical indices were measured, along with 3-wk calcium tracer studies. Percent differences are reported compared to preflight. Ionized calcium was unchanged (2.8 +/-2.1 %) during flight. Calcium absorption was variable inflight, but was decreased after landing. Vitamin D stores were decreased 35 +/-24% inflight, similar to previous reports. Serum PTH was decreased 59 +/-9% during flight (greater than we previously reported), while 1,25(OH)(sub 2)-Vitamin D was decreased in 2 of 3 subjects. Markers of bone resorption (e.g., crosslinks) were increased in all subjects. Bone-specific alkaline phosphatase was decreased (n=1) or unchanged (n=2), while osteocalcin was decreased 34 +/-23%. Previously presented data showed that inflight bone loss is associated with increased resorption and unchanged/decreased formation. The data reported here support these earlier findings. These studies will help to extend our understanding of space flight-induced bone loss, and of bone loss associated with diseases such as osteoporosis or paralysis.

Smith, Scott M.↗