Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISTILLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Chapter 8: Biomass Pyrolysis Oils

Fast pyrolysis is heating on the order of 1000 degrees C/s in the absence of oxygen to 40-600 degrees C, which causes decomposition of the biomass. Liquid product yield from biomass can be as much as 80% of starting dry weight and contains up to 75% of the biomass energy content. Other products are gases, primarily carbon monoxide, carbon dioxide, and methane, as well as solid char and ash. Residence time in the reactor is only 0.5-2 s so that relatively small, low-capital-cost reactors can be used. The low capital cost combined with greenhouse gas emission reductions relative to petroleum fuels of 50-95% makes pyrolysis an attractive process. The pyrolysis liquids have been investigated as a refinery feedstock and as stand-alone fuels. Utilization of raw pyrolysis oil has proven challenging. The organic fraction is highly corrosive because of its high organic acid content. High water content lowers the net heating value and can increase corrosivity. It can be poorly soluble in petroleum or petroleum products and can readily absorb water. Distillation residues can be as high as 50%, viscosity can be high, oils can exhibit poor stability in storage, and they can contain suspended solids. The ignition quality of raw pyrolysis oils is poor, with cetane number estimates ranging from 0 to 35, but more likely to be in the lower end of that range. While the use of raw pyrolysis oils in certain specific applications with specialized combustion equipment may be possible, raw oils must be significantly upgraded for use in on-highway spark-ignition (SI) and compression-ignition (CI) engines. Upgrading approaches most often involve catalytic hydrodeoxygenation, one of a class of reactions known as hydrotreating or hydroprocessing. This chapter discusses the properties of raw and upgraded pyrolysis oils, as well as the potential for integrating biomass pyrolysis with a petroleum refinery to significantly reduce the hydroprocessing cost.

09 BIOMASS FUELS↗

Data readiness pipeline patterns for scientific AI at scale: Insights from climate, fusion, life sciences, and materials

This article examines how data readiness for AI principles apply to large scientific datasets used to train foundation models. We analyze archetypal workflows across four representative domains—climate, nuclear fusion, life sciences, and materials—to identify common preprocessing patterns and domain‐specific constraints. We introduce a two‐dimensional readiness model that combines canonical preprocessing patterns with a five‐level operational readiness scale, both tailored to high‐performance computing (HPC) environments. This construct helps outline key challenges in transforming large‐scale scientific data into formats suitable for scalable AI training. Together, these dimensions form a conceptual maturity matrix that characterizes scientific data readiness and guides infrastructure development toward standardized, cross‐domain support for scalable and reproducible AI for science. Finally, we evaluate this maturity matrix in the context of case studies including ClimaX (climate), AFLOW (materials), OpenFold (proteomics), and DIII‐D fusion disruption‐prediction workflows, from which we distill lessons learned and provide recommendations to guide practitioners in developing robust AI‐readiness pipelines. Finally, we discuss remaining cross‐cutting challenges that persist across scientific domains.

97 MATHEMATICS AND COMPUTING↗

An Ideal Molecular Sieve for Acetylene Removal from Ethylene with Record Selectivity and Productivity

Realization of ideal molecular sieves, in which the larger gas molecules are completely blocked without sacrificing high adsorption capacities of the preferred smaller gas molecules, can significantly reduce energy costs for gas separation and purification and thus facilitate a possible technological transformation from the traditional energy-intensive cryogenic distillation to the energy-efficient, adsorbent-based separation and purification in the future. Although extensive research endeavors are pursued to target ideal molecular sieves among diverse porous materials, over the past several decades, ideal molecular sieves for the separation and purification of light hydrocarbons are rarely realized. Herein, an ideal porous material, SIFSIX-14-Cu-i (also termed as UTSA-200), is reported with ultrafine tuning of pore size (3.4 Å) to effectively block ethylene (C 2 H 4 ) molecules but to take up a record-high amount of acetylene (C 2 H 2 , 58 cm 3 cm -3 under 0.01 bar and 298 K). The material therefore sets up new benchmarks for both the adsorption capacity and selectivity, and thus provides a record purification capacity for the removal of trace C 2 H 2 from C 2 H 4 with 1.18 mmol g -1 C 2 H 2 uptake capacity from a 1/99 C 2 H 2 /C 2 H 4 mixture to produce 99.9999% pure C 2 H 4 (much higher than the acceptable purity of 99.996% for polymer-grade C 2 H 4 ), as demonstrated by experimental breakthrough curves.

36 MATERIALS SCIENCE↗

Tailor-Made Microporous Metal–Organic Frameworks for the Full Separation of Propane from Propylene Through Selective Size Exclusion

Adsorptive separation of olefin/paraffin mixtures by porous solids can greatly reduce the energy consumption associated with the currently employed cryogenic distillation technique. Here, the complete separation of propane and propylene by a designer microporous metal–organic framework material is reported. The compound, Y 6 (OH) 8 (abtc) 3 (H 2 O) 6 (DMA) 2 (Y-abtc, abtc = 3,3',5,5'-azobenzene-tetracarboxylates; DMA = dimethylammonium), is rationally designed through topology-guided replacement of inorganic building units. Y-abtc is both thermally and hydrothermally robust, and possesses optimal pore window size for propane/propylene separation. It adsorbs propylene with fast kinetics under ambient temperature and pressure, but fully excludes propane, as a result of selective size exclusion. Multicomponent column breakthrough experiments confirm that polymer-grade propylene (99.5%) can be obtained by this process, demonstrating its true potential as an alternative sorbent for efficient separation of propane/propylene mixtures.

36 MATERIALS SCIENCE↗

Designer Metal–Organic Frameworks for Size–Exclusion–Based Hydrocarbon Separations: Progress and Challenges

The separation of hydrocarbons is of primary importance in the petrochemical industry but remains a challenging process. Hydrocarbon separations have traditionally relied predominantly on costly and energy intensive heat-driven procedures such as low temperature distillations. Adsorptive separation based on porous solids represents an alternative technology that is potentially more energy efficient for the separation of some hydrocarbons. Great efforts have been made recently not only on the development of adsorbents with optimal separation performance but also towards the subsequent implementation of adsorption-based separation technology. Emerging as a relatively new class of multifunctional porous materials, metal-organic frameworks hold substantial promise as adsorbents for highly efficient separation of hydrocarbons. This is because of their exceptional and intrinsic porosity tunability which enables size-exclusion based separations that render the highest possible separation selectivity. In this review, we highlight the recent advances in the development of MOFs for separation of selected groups of hydrocarbons, including methane/C2 hydrocarbons, normal alkanes, alkane isomers, alkane/alkene/alkyne, and C8 alkylaromatics, with a particular focus on separations based on size-exclusion mechanism. Insights into tailor-made structures, material design strategies, and structure-property relations will be elucidated. In addition, the existing challenges and possible future directions of this important research field will be discussed.

36 MATERIALS SCIENCE↗

Electro-Thermal Characterization of Dynamical VO 2 Memristors via Local Activity Modeling

We report translating the surging interest in neuromorphic electronic components, such as those based on nonlinearities near Mott transitions, into large-scale commercial deployment faces steep challenges in the current lack of means to identify and design key material parameters. These issues are exemplified by the difficulties in connecting measurable material properties to device behavior via circuit element models. Here, the principle of local activity is used to build a model of VO 2 /SiN Mott threshold switches by sequentially accounting for constraints from a minimal set of quasistatic and dynamic electrical and high-spatial-resolution thermal data obtained via in situ thermoreflectance mapping. By combining independent data sets for devices with varying dimensions, the model is distilled to measurable material properties, and device scaling laws are established. The model can accurately predict electrical and thermal conductivities and capacitances and locally active dynamics (especially persistent spiking self-oscillations). The systematic procedure by which this model is developed has been a missing link in predictively connecting neuromorphic device behavior with their underlying material properties, and should enable rapid screening of material candidates before employing expensive manufacturing processes and testing procedures.

36 MATERIALS SCIENCE↗

Reward Driven Workflows for Unsupervised Explainable Analysis of Phases and Ferroic Variants From Atomically Resolved Imaging Data

Rapid progress in aberration corrected electron microscopy necessitates development of robust methods for the identification of phases, ferroic variants, and other pertinent aspects of materials structure from imaging data. While unsupervised methods for clustering and classification are widely used for these tasks, their performance can be sensitive to hyperparameter selection in the analysis workflow. In this study, the effects of descriptors and hyperparameters are explored on the capability of unsupervised ML methods to distill local structural information, exemplified by the discovery of polarization and lattice distortion in Sm − dopped BiFeO 3 (BFO) thin films. It is demonstrated that a reward-driven approach can be used to optimize these key hyperparameters across the full workflow, where rewards are designed to reflect domain wall continuity and straightness, ensuring that the analysis aligns with the material's physical behavior. This approach allows the discovery of local descriptors that are best aligned with the specific physical behavior, providing insight into the fundamental physics of materials. The reward driven workflow is further extended to disentangle structural factors of variation via an optimized variational autoencoder (VAE). Lastly, the importance of well-defined rewards is explored as a quantifiable measure of the success of the workflow.

Barakati, Kamyar [University of Tennessee, Knoxvil↗

Innovative Approach to Recycle Lithium‐Ion Battery Electrolytes via Sequential Chemical Processes

The rapid growth of electric vehicles (EV) has driven the widespread use of lithium-ion batteries (LIBs). This will result in a large amount of spent batteries that if not properly disposed will pose significant environmental damage, especially from the electrolyte. The electrolyte contains lithium hexafluorophosphate (LiPF 6 ), which when treated by either incineration or water washing can generate harmful F- and P-containing substances such as hydrofluoric acid (HF). In this study, an innovative two-step process is presented to separate and purify both the solvents and lithium salts from the spent electrolyte. Antisolvent assisted precipitation is used to selectively isolate LiPF 6 salt in the form of a complex with ethylene carbonate. Subsequent distillation then separates the volatile electrolyte solvents and antisolvent from each other effectively. In addition, a new process to further purify LiPF 6 from its ethylene carbonate (EC) complex is also presented. This electrolyte recycling method not only enables the recovery of the high-value LiPF 6 salt and the electrolyte solvents, but also paves the way for environmentally responsible and circular LIB recycling.

electrolyte↗

Dynamic real‐time optimization for a CO 2 capture process

Growing awareness of climate change has led to increased focus on new energy processes that mitigate generation of CO 2 , or provide for its efficient capture. To enable the development of these processes, advanced modeling and optimization platforms have been created. New capabilities among platforms include efficient solution strategies for online optimization problems. For real time, dynamic optimization of CO 2 capture processes, we demonstrate the application of the Python‐based Pyomo platform to facilitate realization of Moving Horizon Estimation and Nonlinear Model Predictive Control, through novel nonlinear optimization and sensitivity strategies. This capability allows large scale, first principle models to be applied for online optimization. Here, we introduce the Control and Adaptation with Predictive Sensitivity Enhancements (CAPRESE) framework to demonstrate this framework for advanced energy processes. Moreover, we present two case studies: profile tracking with detailed tray‐by‐tray distillation models and Bubbling Fluidized Bed reactors for CO 2 capture. © 2018 American Institute of Chemical Engineers AIChE J , 65: e16511 2019

Thierry, David↗

A complementarity-based vapor-liquid equilibrium formulation for equation-oriented simulation and optimization

Vapor-Liquid Equilibrium (VLE) is a cornerstone of computer aided process engineering (CAPE). Embedded within process system models, VLE calculations are inherently procedural with non-smooth behavior that frequently require discrete decisions. Traditionally, these features resist the incorporation of VLE within efficient, large-scale equation-oriented (EO) process simulation and optimization strategies. On the other hand, recent reformulation of VLE models through the incorporation of complementarity constraints has broadened its scope to deal seamlessly with phase transitions and even supercritical excursions in process simulation and optimization. In this study, we extend these VLE complementarity models to EO frameworks where procedural thermodynamic property libraries are still required. Here, we develop an efficient, non-intrusive, and intuitive “square-flash” equation system that has been implemented within the IDAES Integrated Platform (IDAES-IP). Further, the effectiveness of this modular approach is demonstrated on case studies for non-ideal flash calculations and distillation optimization with disappearing phases and supercritical transitions.

97 MATHEMATICS AND COMPUTING↗

Modular–scale ethane to liquids via chemical looping oxidative dehydrogenation: Redox catalyst performance and process analysis

The difficulties in the liquefaction and transportation of ethane in shale gas has led to significant rejection, via reinjection or flaring, of this valuable hydrocarbon resource. Upgrading this low–value, isolated ethane into easily transportable liquid fuels is a promising solution to this supply glut. In this study, we present a modular system that can potentially be operated economically at geographically isolated gas–processing facilities. The modular ethane–to–liquids (M–ETL) system uses a chemical looping–oxidative dehydrogenation (CL–ODH) technology to efficiently convert ethane and natural gas liquids into olefins (primarily ethylene) via cyclic redox reactions of highly effective redox catalyst particles. The resulting olefins are then converted to gasoline and mid–distillate products via oligomerization. CL–ODH eliminates air separation and equilibrium limitations for olefin generation. It also simplifies the process scheme and reduces energy consumption. Here, we present experimental proof–of–concept data on CL–ODH conversion of ethane to ethylene. Using the CL–ODH performance data at 750°C, we show that a simple, single–pass configuration can be economically viable at distributed sites. We identify that economic factors such as the capital cost, price of ethane feed, and value of electricity byproduct have strong effects on the required selling price of the liquids. It is also noted that the economic viability of the M–ETL system is relatively insensitive to the liquid yield under a low ethane price scenario. In conclusion, the demand and value of electricity at distributed locations, on the other hand, can play an important role in the optimal process configuration and economics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Ultra‐Microporous Materials for Selective Xenon Adsorption and Separation

Abstract The demand for Xe/Kr separation continues to grow due to the industrial significance of high‐purity Xe gas. Current separation processes rely on energy intensive cryogenic distillation. Therefore, less energy intensive alternatives, such as physisorptive separation, using porous materials, are required. Herein we show that an underexplored class of porous materials called hybrid ultra‐microporous materials (HUMs) affords new benchmark selectivity for Xe separation from Xe/Kr mixtures. The isostructural materials, CROFOUR‐1‐Ni and CROFOUR‐2‐Ni, are coordination networks that have coordinatively saturated metal centers and two distinct types of micropores, one of which is lined by CrO 4 2− (CROFOUR) anions and the other is decorated by the functionalized organic linker. These nets offer unprecedented selectivity towards Xe. Modelling indicates that the selectivity of these nets is tailored by synergy between the pore size and the strong electrostatics afforded by the CrO 4 2− anions.

Mohamed, Mona H.↗

A Metal‐Organic Framework with Nonpolar Pore Surfaces for the One‐Step Acquisition of C 2 H 4 from a C 2 H 4 and C 2 H 6 Mixture

Abstract Because C 2 H 4 plays an essential role in the chemical industry, economical and energy‐efficient separation of ethylene (C 2 H 4 ) from ethane (C 2 H 6 ) is extremely important. With the exception of energy‐intensive cryogenic distillation, there are few one‐step methods to obtain polymer‐grade (≥99.95 % pure) C 2 H 4 from C 2 H 4 /C 2 H 6 mixtures. Here we report a highly stable metal‐organic‐framework (MOF) FJI‐H11‐Me(des) (FJI‐H=Hong's group in Fujian Institute of Research on the Structure of Matter) which features one‐dimensional hexagonal nonpolar pore surfaces constructed by aromatic rings and alkyl groups. This FJI‐H11‐Me(des) adsorbs C 2 H 6 rather than C 2 H 4 between 273 and 303 K. Practical breakthrough experiments with C 2 H 4 containing 1 % C 2 H 6 have shown that FJI‐H11‐Me(des) can realize the acquisition in one‐step of polymer‐grade, 99.95 % pure C 2 H 4 under various conditions including different gas flow rates, temperatures and relative humidity.

Di, Zhengyi↗

Metal‐Organic Frameworks for C6 Alkane Separation

Abstract The separation of alkane isomers is an important yet challenging process in the petrochemical industry. Being a crucial step to produce premium gasoline components as well as optimum ethylene feed, the current industrial separation by distillation is extremely energy intensive. Adsorptive separation based on zeolite is limited by insufficient adsorption capacity. Metal‐organic frameworks (MOFs) hold enormous promise as alternative adsorbents due to their diverse structural tunability and exceptional porosity. Precise control of their pore geometry/dimensions has led to superior performance. In this minireview, we highlight the recent progresses in developing MOFs for the separation of C6 alkane isomers. Representative MOFs are reviewed based on their separation mechanisms. Emphasis is put on the material design rationale for achieving optimal separation capability. Finally, we briefly discuss the existing challenges, possible solutions, and future directions of this important field.

Xie, Feng↗

Expanding Linker Dimensionality in Metal‐organic Frameworks for sub‐Ångstrom Pore Control for Separation Applications

Abstract Metal‐organic frameworks (MOFs) are a class of porous materials with high surface areas, which are acquiring rapid attention on an exponential basis. A significant characteristic of MOFs is their ability to act as adsorbents to selectively separate component mixtures of similar size, thereby addressing the technological need for an alternative approach to conventional distillation methods. Recently, MOFs comprising a 3‐Dimensional (3D) linker have shown outstanding capabilities for difficult separations compared to the parent 2‐Dimensional (2D) analogue. 3D‐linkers with a polycyclic core are underrepresented in the MOF database due to the widespread preferred use of 2D‐linkers and the misconceived high‐cost of 3D linkers. We summarize the recent research of 3D‐linker MOFs and highlight their beneficial employment for selective gas and hydrocarbon adsorption and separation. Furthermore, we outline forecasts in this area to create a platform for widespread adoption of 3D‐linkers in MOF synthesis.

Macreadie, Lauren K.↗

Purification of Propylene and Ethylene by a Robust Metal–Organic Framework Mediated by Host–Guest Interactions

Industrial purification of propylene and ethylene requires cryogenic distillation and selective hydrogenation over palladium catalysts to remove propane, ethane and/or trace amounts of acetylene. Here, we report the excellent separation of equimolar mixtures of propylene/propane and ethylene/ethane, and of a 1/100 mixture of acetylene/ethylene by a highly robust microporous material, MFM-520, under dynamic conditions. In situ synchrotron single crystal X-ray diffraction, inelastic neutron scattering and analysis of adsorption thermodynamic parameters reveal that a series of synergistic host-guest interactions involving hydrogen bonding and π⋯π stacking interactions underpin the cooperative binding of alkenes within the pore. Notably, the optimal pore geometry of the material enables selective accommodation of acetylene. The practical potential of this porous material has been demonstrated by fabricating mixed-matrix membranes comprising MFM-520, Matrimid and PIM-1, and these exhibit not only a high permeability for propylene (≈1984 Barrer), but also a separation factor of 7.8 for an equimolar mixture of propylene/propane at 298 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–Organic Frameworks for C6 Alkane Separation

The separation of alkane isomers is an important yet challenging process in the petrochemical industry. Being a crucial step to produce premium gasoline components as well as optimum ethylene feed, the current industrial separation by distillation is extremely energy intensive. Adsorptive separation based on zeolite is limited by insufficient adsorption capacity. Metal-organic frameworks (MOFs) hold enormous promise as alternative adsorbents due to their diverse structural tunability and exceptional porosity. Precise control of their pore geometry/dimensions has led to superior performance. In this minireview, we highlight the recent progresses in developing MOFs for the separation of C6 alkane isomers. Representative MOFs are reviewed based on their separation mechanisms. Emphasis is put on the material design rationale for achieving optimal separation capability. Lastly, we briefly discuss the existing challenges, possible solutions, and future directions of this important field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗