Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Crystal structure prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electronic transport mechanisms in a thin crystal of the Kitaev candidate α -RuCl 3 probed through guarded high impedance measurements

α-RuCl 3 is considered to be the top candidate material for the experimental realization of the celebrated Kitaev model, where ground states are quantum spin liquids with interesting fractionalized excitations. It is, however, known that additional interactions beyond the Kitaev model trigger in α-RuCl 3 a long-range zigzag antiferromagnetic ground state. In this work, we investigate a nanoflake of α-RuCl 3 through guarded high impedance measurements aimed at reaching the regime where the system turns into a zigzag antiferromagnet. We investigated a variety of temperatures (1.45–175 K) and out-of-plane magnetic fields (up to 11 T), finding a clear signature of a structural phase transition at ≈160 K as reported for thin crystals of α-RuCl 3 , as well as a thermally activated behavior at temperatures above ≈30 K, with a characteristic activation energy significantly smaller than the energy gap that we observe for α-RuCl 3 bulk crystals through our angle resolved photoemission spectroscopy (ARPES) experiments. Additionally, we found that below ≈30 K, transport is ruled by Efros–Shklovskii variable range hopping (VRH). Most importantly, our data show that below the magnetic ordering transition known for bulk α-RuCl 3 in the frame of the Kitaev–Heisenberg model (≈7 K), there is a clear deviation from VRH or thermal activation transport mechanisms. Finally, our work demonstrates the possibility of reaching, through specialized high impedance measurements, the thrilling ground states predicted for α-RuCl 3 at low temperatures in the frame of the Kitaev–Heisenberg model and informs about the transport mechanisms in this material in a wide temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Fundamental Thermodynamic, Kinetic, and Mechanical Properties of Lithium and Its Alloys

Lithium alloying reactions are beneficial in promoting uniform plating and stripping of lithium metal in all-solid-state batteries. First-principles calculations are performed to predict thermodynamic, kinetic, and mechanical properties of lithium and several important Li–M alloys (M = Mg, Ag, Zn, Al, Ga, In, Sn, Sb, and Bi). While the Li–Mg binary system forms a solid solution, most other lithium–metal alloys prefer stoichiometric intermetallic compounds with common local motifs that enable fast Li diffusion. Lithium and Li-rich alloys exhibit an unusually flat energy landscape along paths that connect BCC to close-packed structures like FCC and HCP, with important implications for mechanical properties. Very low migration barriers for Li diffusion that rival those of superion conductors are predicted, both in pure Li and in Li–M intermetallics. However, vacancy concentration, which is crucial for substitutional diffusion, is predicted to be low in metallic Li and most Li–M intermetallics. Compounds such as B32 LiAl and LiGa as well as D0 3 Li 3 Sb and Li 3 Bi exhibit structural vacancies at higher ends of their voltage windows, which together with low migration barriers leads to exceptionally high Li mobilities. In the Li–Mg solid solution, the addition of Mg is found to decrease the vacancy tracer diffusion coefficient by an order of magnitude.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Materials synthesis at terapascal static pressures

Theoretical modelling predicts very unusual structures and properties of materials at extreme pressure and temperature conditions. Hitherto, their synthesis and investigation above 200 gigapascals have been hindered both by the technical complexity of ultrahigh-pressure experiments and by the absence of relevant in situ methods of materials analysis. Here we report on a methodology developed to enable experiments at static compression in the terapascal regime with laser heating. We apply this method to realize pressures of about 600 and 900 gigapascals in a laser-heated double-stage diamond anvil cell, producing a rhenium–nitrogen alloy and achieving the synthesis of rhenium nitride Re 7 N 3 —which, as our theoretical analysis shows, is only stable under extreme compression. Full chemical and structural characterization of the materials, realized using synchrotron single-crystal X-ray diffraction on microcrystals in situ, demonstrates the capabilities of the methodology to extend high-pressure crystallography to the terapascal regime.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Extensive 3D mapping of dislocation structures in bulk aluminum

Abstract Thermomechanical processing such as annealing is one of the main methods to tailor the mechanical properties of materials, however, much is unknown about the reorganization of dislocation structures deep inside macroscopic crystals that give rise to those changes. Here, we demonstrate the self-organization of dislocation structures upon high-temperature annealing in a mm-sized single crystal of aluminum. We map a large embedded 3D volume ( $$100\times 300\times 300$$ 100 × 300 × 300 $$\upmu$$ μ m $$^3$$ 3 ) of dislocation structures using dark field X-ray microscopy (DFXM), a diffraction-based imaging technique. Over the wide field of view, DFXM’s high angular resolution allows us to identify subgrains, separated by dislocation boundaries, which we identify and characterize down to the single-dislocation level using computer-vision methods. We demonstrate how even after long annealing times at high temperatures, the remaining low density of dislocations still pack into well-defined, straight dislocation boundaries (DBs) that lie on specific crystallographic planes. In contrast to conventional grain growth models, our results show that the dihedral angles at the triple junctions are not the predicted 120 $$^{\circ }$$ ∘ , suggesting additional complexities in the boundary stabilization mechanisms. Mapping the local misorientation and lattice strain around these boundaries shows that the observed strain is shear, imparting an average misorientation around the DB of $$\approx$$ ≈ 0.003 to 0.006 $$^{\circ }$$ ∘ .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tight-Binding-Based Method for Simulations of Complex Materials with Accompanying Database

The NRL-Tight-Binding (NRL-TB) method has been applied successfully to many monatomic, binary, and a few ternary systems. The method consists of a fit to Density Functional Theory (DFT) results and has transferability beyond the fitted DFT database including performing tight-binding molecular dynamics simulations. We are working on a new website with a detailed guide of how to use the method in performing the fit to DFT results (Fitting Code) and obtaining non-orthogonal TB parameters expressed in a polynomial form as environment-dependent Slater-Koster parameters (on-site terms), and neighbor distance-dependent Hamiltonian and Overlap terms. These parameters are then used in a Static Code to verify or make predictions for large systems often beyond the computational capabilities of standard DFT codes. Our starting point was a website developed at NRL some years ago which NRL no longer supports. We have now been augmenting that website with new examples of expanding the original capabilities of the method such as incorporating in the codes f-electron states. Our website (esd.cos.gmu.edu/tb) contains two separate branches: One named NRL-TB with the full documentation of the method including source codes and examples. The other branch, named ESD-dB, is a library of electronic structure calculations for all the monatomic elements (a subset of the elements also found in a recent book by the author of this proposal. See reference 22) and an approximately 700 hundred compounds in specific crystal structures. We discuss below the progress made so far in improving and expanding the capabilities of our TB method and the plans for further extensions of our approach.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Few-layer tin sulfide (SnS): Controlled synthesis, thickness dependent vibrational properties, and ferroelectricity

Group IV monochalcogenides, anisotropic van der Waals crystals (and black phosphorus analogues), are attracting increasing interest due to a number of exceptional properties including anisotropic optoelectronics and multiferroicity predicted and in part realized in the ultrathin limit. Due to their enhanced chemical reactivity, both exfoliation and synthesis of monolayer and few-layer crystals pose challenges not found in other 2D/layered materials, such as the transition metal dichalcogenides. In this work, we show that SnS synthesis on SnS 2 van der Waals substrates can address these challenges and consistently produces few-layer flakes, a capability that is explained via analysis of real-time microscopy of the growth process. Raman spectroscopy combined with efficient computations of the Raman-active modes across an extended thickness range enables a comprehensive understanding of the evolution of the vibrational properties of SnS with number of layers. Lateral piezoresponse force microscopy provides unprecedented insight into the stacking-dependent polarization and ferroelectric domain structures in large few-layer SnS flakes. The combined results establish a basis for further fundamental studies and applications of SnS and other group IV monochalcogenides in the few-layer regime.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Wurtzite materials in alloys of rock salt compounds

Materials with crystal structures containing tetrahedral motifs are preferable for optoelectronic applications because they often have direct band gaps and low electron effective masses. However, crystal structures of manganese chalcogenides typically contain octahedral motifs, such as in rocksalt (RS) MnS and MnSe materials. Here we experimentally show that MnS 1-x Se x alloys with tetrahedrally-bonded wurtzite (WZ) structure can form between MnSe and MnS parent compounds with octahedral RS structures, at S-rich compositions (x<0.4) and low synthesis temperatures (~300°C). The calculated mixing enthalpies of MnS1-xSex alloys in RS and WZ structures cannot explain this experimental observation, so we hypothesize that WZ stabilization may be related to smaller structure density and lower surface energy compared to RS. The resulting WZ MnS 1-x Se x alloys have 3.0-3.2 eV optical absorption onset and lower electrical conductivity (<0.0001 S/cm) compared to the parent RS compounds. These experimental measurement result are consistent with computationally predicted band gaps and effective masses.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Comprehensive view of microscopic interactions between DNA-coated colloids

Abstract The self-assembly of DNA-coated colloids into highly-ordered structures offers great promise for advanced optical materials. However, control of disorder, defects, melting, and crystal growth is hindered by the lack of a microscopic understanding of DNA-mediated colloidal interactions. Here we use total internal reflection microscopy to measure in situ the interaction potential between DNA-coated colloids with nanometer resolution and the macroscopic melting behavior. The range and strength of the interaction are measured and linked to key material design parameters, including DNA sequence, polymer length, grafting density, and complementary fraction. We present a first-principles model that screens and combines existing theories into one coherent framework and quantitatively reproduces our experimental data without fitting parameters over a wide range of DNA ligand designs. Our theory identifies a subtle competition between DNA binding and steric repulsion and accurately predicts adhesion and melting at a molecular level. Combining experimental and theoretical results, our work provides a quantitative and predictive approach for guiding material design with DNA-nanotechnology and can be further extended to a diversity of colloidal and biological systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Prediction of exotic magnetic states in the alkali-metal quasi-one-dimensional iron selenide compound Na 2 FeSe 2

The magnetic and electronic phase diagram of a model for the quasi-one-dimensional alkali-metal iron selenide compound Na 2 FeSe 2 is presented. The novelty of this material is that the valence of iron is Fe 2+ , contrary to most other iron-chain compounds with valence Fe 3+ . Using first-principles techniques, we developed a three-orbital tight-binding model that reproduces the ab initio band structure near the Fermi level. Including Hubbard and Hund couplings and studying the model via the density-matrix renormalization group and Lanczos methods, we constructed the ground-state phase diagram. A robust region where the block state ↑↑↓↓↑↑↓↓ is stabilized was unveiled. The analog state in iron ladders, employing 2×2 ferromagnetic blocks, is by now well established, but in chains a block magnetic order has not been observed yet in real materials. The phase diagram also contains a large region of canonical staggered spin order ↑↓↑↓↑↓↑ at very large Hubbard repulsion. At the block-to-staggered transition region, an exotic phase is stabilized with a mixture of both states: an inhomogeneous orbital-selective charge density wave with the exotic spin configuration ↑↑↓↑↓↓↑↓. Our predictions for Na 2 FeSe 2 may guide crystal growers and neutron-scattering experimentalists towards the realization of block states in one-dimensional iron selenide chain materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Orbital Ingredients and Persistent Dirac Surface State for the Topological Band Structure in FeTe 0.55 Se 0.45

FeTe 0.55 Se 0.45 (FTS) occupies a special spot in modern condensed matter physics at the intersections of electron correlation, topology, and unconventional superconductivity. The bulk electronic structure of FTS is predicted to be topologically nontrivial due to the band inversion between the d x z and p z bands along Γ − Z . However, there remain debates in both the authenticity of the Dirac surface states (DSSs) and the experimental deviations of band structure from the theoretical band inversion picture. Here we resolve these debates through a comprehensive angle-resolved photoemission spectroscopy investigation. We first observe a persistent DSS independent of k z . Then, by comparing FTS with FeSe, which has no band inversion along Γ − Z , we identify the spectral weight fingerprint of both the presence of the p z band and the inversion between the d x z and p z bands. Furthermore, we propose a renormalization scheme for the band structure under the framework of a tight-binding model preserving crystal symmetry. Our results highlight the significant influence of correlation on modifying the band structure and make a strong case for the existence of topological band structure in this unconventional superconductor. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Co-flow injection for serial crystallography at X-ray free-electron lasers

Serial femtosecond crystallography (SFX) is a powerful technique that exploits X-ray free-electron lasers to determine the structure of macromolecules at room temperature. Despite the impressive exposition of structural details with this novel crystallographic approach, the methods currently available to introduce crystals into the path of the X-ray beam sometimes exhibit serious drawbacks. Samples requiring liquid injection of crystal slurries consume large quantities of crystals (at times up to a gram of protein per data set), may not be compatible with vacuum configurations on beamlines or provide a high background due to additional sheathing liquids present during the injection. Proposed and characterized here is the use of an immiscible inert oil phase to supplement the flow of sample in a hybrid microfluidic 3D-printed co-flow device. Co-flow generation is reported with sample and oil phases flowing in parallel, resulting in stable injection conditions for two different resin materials experimentally. A numerical model is presented that adequately predicts these flow-rate conditions. The co-flow generating devices reduce crystal clogging effects, have the potential to conserve protein crystal samples up to 95% and will allow degradation-free light-induced time-resolved SFX.

3D printing↗
DOE OSTI2023

CasDinG is a 5′-3′ dsDNA and RNA/DNA helicase with three accessory domains essential for type IV CRISPR immunity

Abstract CRISPR-associated DinG protein (CasDinG) is essential to type IV-A CRISPR function. Here, we demonstrate that CasDinG from Pseudomonas aeruginosa strain 83 is an ATP-dependent 5′-3′ DNA translocase that unwinds double-stranded (ds)DNA and RNA/DNA hybrids. The crystal structure of CasDinG reveals a superfamily 2 helicase core of two RecA-like domains with three accessory domains (N-terminal, arch, and vestigial FeS). To examine the in vivo function of these domains, we identified the preferred PAM sequence for the type IV-A system (5′-GNAWN-3′ on the 5′-side of the target) with a plasmid library and performed plasmid clearance assays with domain deletion mutants. Plasmid clearance assays demonstrated that all three domains are essential for type IV-A immunity. Protein expression and biochemical assays suggested the vFeS domain is needed for protein stability and the arch for helicase activity. However, deletion of the N-terminal domain did not impair ATPase, ssDNA binding, or helicase activities, indicating a role distinct from canonical helicase activities that structure prediction tools suggest involves interaction with dsDNA. This work demonstrates CasDinG helicase activity is essential for type IV-A CRISPR immunity as well as the yet undetermined activity of the CasDinG N-terminal domain.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Magnetostriction and damping of forced vibrations in Fe-Mo single and polycrystal alloys

Magnetostriction and damping of forced vibrations in Fe-Mo single and polycrystal alloys is studied and analyzed with respect to existing approaches and experimental data. In this work, our data suggest that a more complex dependence (compared with linear dependence predicted by Smith and Birchak) between damping capacity and magnetostriction takes place for this and possibly other Fe-based ferromagnetic alloys. We believe that more factors related to the structural changes, brought about by the additions (elements added to Fe), which can affect phase stability as well as magnetic and electric contributions influencing property response, should be considered to provide a better correlation between the magnetic and magnetomechanical characteristics of this alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Scale-invariant machine-learning model accelerates the discovery of quaternary chalcogenides with ultralow lattice thermal conductivity

We design an advanced machine-learning (ML) model based on crystal graph convolutional neural network that is insensitive to volumes (i.e., scale) of the input crystal structures to discover novel quaternary chalcogenides, AMM'Q 3 (A/M/M' = alkali, alkaline earth, post-transition metals, lanthanides, and Q = chalcogens). These compounds are shown to possess ultralow lattice thermal conductivity (κ l ), a desired requirement for thermal-barrier coatings and thermoelectrics. Upon screening the thermodynamic stability of ~1 million compounds using the ML model iteratively and performing density-functional theory (DFT) calculations for a small fraction of compounds, we discover 99 compounds that are validated to be stable in DFT. Taking several DFT-stable compounds, we calculate their κ l using Peierls–Boltzmann transport equation, which reveals ultralow κ l (<2 Wm -1 K -1 at room temperature) due to their soft elasticity and strong phonon anharmonicity. Our work demonstrates the high efficiency of scale-invariant ML model in predicting novel compounds and presents experimental-research opportunities with these new compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optical pulse-induced ultrafast antiferrodistortive transition in SrTiO 3

The ultrafast dynamics of the antiferrodistortive phase transition in perovskite SrTiO 3 is monitored via time-domain Brillouin scattering. Using femtosecond optical pulses, we initiate a thermally driven tetragonal-to-cubic structural transformation and detect the crystal phase through changes in the frequency of Brillouin oscillations (BO) induced by propagating acoustic phonons. Coupling the measured BO frequency with a spatiotemporal heat diffusion model, we demonstrate that, for a sample kept in the tetragonal phase, deposition of sufficient thermal energy induces a rapid transformation of the heat-affected region to the cubic phase. The initial phase change is followed by a slower reverse cubic-to-tetragonal phase transformation occurring on a timescale of hundreds of picoseconds. Here, we attribute this ultrafast phase transformation in the perovskite to a structural resemblance between atomic displacements of the R-point soft optic mode of the cubic phase and the tetragonal phase, both characterized by anti-phase rotation of oxygen octahedra. The structural relaxation time exhibits a strong temperature dependence consistent with the prediction of the equation of motion describing collective oxygen octahedra rotation based on the energy landscape of the phenomenological Landau theory of phase transitions. Evidence of such a fast structural transition in perovskites can open up new avenues in information processing and energy storage sectors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

IRMA

IRMA (In)elastic Representation of Materials As S(α,β) evaluations IRMA turns one phonon model into three outputs that usually require three separate tool chains: an evaluated nuclear-data file, predicted neutron-scattering spectra, and scattering kernels for Monte Carlo transport. The three outputs draw on a single, consistent description of the material, so the evaluation, the spectroscopy that can validate it, and the transport that uses it always agree about the physics. Nuclear data. IRMA writes ENDF-6 File 7 thermal scattering evaluations on automatically constructed (α, β) grids. This part reimplements and generalizes NJOY's LEAPR: the classic kernels reproduce freshly generated NJOY2016 tapes digit for digit and published reference tapes to about 1e-4, and the generalized paths add the exact coherent one-phonon term, anisotropic Debye-Waller tensors, coherent elastic for arbitrary crystals, and a per-species partition for polyatomic materials. The tapes feed NJOY, AMPX, FUDGE, and every transport code downstream of them. Neutron spectroscopy. The irma.spectra forward model projects the same physics onto an instrument's kinematics and resolution: INS spectra for VISION and generic indirect geometries, and 2-D S(Q,E) powder maps for direct-geometry spectrometers, from a phonopy model or straight from a phonon DOS. It can be used to predict a proposed measurement before beam time; in analysis, it supplies the calculated single-scattering counterpart of a measured spectrum, from the same material description the evaluation was built from. Monte Carlo transport. The irma.ncrystal exporter writes per-temperature scattering kernels for the companion NCrystal plugin, so McStas, OpenMC, and other NCrystal-aware codes sample the same physics. The exported kernels carry the per-site anisotropic Debye-Waller tensors, keeping directional coherent-elastic physics that NCrystal's standard scalar treatment does not represent. With the same physics inside a transport code, an entire beamline becomes a virtual experiment: IRMA's end-to-end validation ran a custom McStas implementation of the ARCS spectrometer, assembled from the existing McVine and McStas models, against measured data. From a bare crystal structure. The irma mlip front end builds the phonon model itself: a structure file and a choice of potential are enough. Nine pretrained machine-learned interatomic potentials are supported, on a laptop CPU, with no first-principles calculation; an approximate phonon model for a new material costs minutes, not a DFT campaign, and the build emits prefilled inputs for all three outputs. The result is a good starting point rather than a finished evaluation: survey-quality physics with every parameter exposed for review. A converged atomistic calculation enters the same way, as a phonopy model, when higher fidelity is needed.

Ramic, Kemal [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2022

Ab initio molecular dynamics free energy study of enhanced copper (II) dimerization on mineral surfaces

Understanding the adsorption of isolated metal cations from water on to mineral surfaces is critical for toxic waste retention and cleanup in the environment. Heterogeneous nucleation of metal oxyhydroxides and other minerals on material surfaces is key to crystal growth and dissolution. The link connecting these two areas, namely cation dimerization and polymerization, is far less understood. In this work we apply ab initio molecular dynamics calculations to examine the coordination structure of hydroxide-bridged Cu(II) dimers, and the free energy changes associated with Cu(II) dimerization on silica surfaces. The dimer dissociation pathway involves sequential breaking of two Cu 2+ -OH – bonds, yielding three local minima in the free energy profiles associated with 0-2 OH – bridges between the metal cations, and requires the design of a (to our knowledge) novel reaction coordinate for the simulations. Cu(II) adsorbed on silica surfaces are found to exhibit stronger tendency towards dimerization than when residing in water. Cluster-plus-implicit-solvent methods yield incorrect trends if OH – hydration is not correctly depicted. The predicted free energy landscapes are consistent with fast equilibrium times (seconds) among adsorbed structures, and favor Cu 2+ dimer formation on silica surfaces over monomer adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Orbital-spin locking and its optical signatures in altermagnets

Altermagnets, magnetic materials with zero magnetization and spin-split band structure, have gained tremendous attention recently for their rich physics and potential applications. Here, we report on a microscopic tight-binding model that unveils a unique coupling between orbitals and spins in d-wave altermagnets, which gives rise to momentum-dependent and spin-selective optical absorption. This coupling promotes the controlled optical excitation of up or down spins depending on the polarization direction of linearly polarized light. Such an effect originates from the coupling of orbitals to the sublattice degree of freedom through the crystal field, which is then coupled to spins through the antiferromagnetic interaction. Our crystal field analysis, which is general to any type of altermagnet, helps understand the onset of altermagnetism from a microscopic point of view, and we use our results to propose clear magneto-optical signatures of our predictions. Our findings shine light on the interplay between orbitals and spins in altermagnets, thus paving the way towards novel orbitronic and optospintronic devices.

Vila, Marc↗