Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coupled models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Wind farm blockage effects: comparison of different engineering models

The work presents four engineering methods to estimate the induction zone in front of a wind turbine and account for the wind farm blockage effect. The methods comprise the vortex cylinder model, vortex dipole model, self-similar model, and wake projection model. The majority of the models presented account for yaw misalignments and ground effect. Actuator disk simulations are used to verify the individual models. The performance of each model is evaluated both in terms of precision and computational time. The induction models are coupled to wake models within the FLOw Redirection and Induction in Steady State framework to provide the full velocity field within a wind farm. Sample wind farm computations are presented, and the impact of including induction effects into wind farm performance predictions is reported. The different codes are publicly available online.

17 WIND ENERGY↗
DOE OSTI2021

Xenon implantation of nanodiamond films for targeted color center emission at sub-nanosecond time scales

In this work, the lifetime of nitrogen-vacancy color centers within nanodiamonds is reduced from 550±13 ps to 297±10 ps through the implantation of xenon. Coupled-mode analysis is employed to characterize the mechanism responsible for the reduction in emission lifetime. The observed spectral lineshape is found to be consistent with a Voigt profile consisting of two Lorentzian resonant peaks at 637 nm and 811 nm that are inhomogeneously broadened by a Gaussian distribution. A convolution of the frequency-domain Lorentzian output, with linewidths less than 1 nm, from the coupled-mode system of equations with a Gaussian with standard deviation of 85 nm is performed to generate the Voigt profile. The shortened emission lifetime is found to be consistent with a coupled mode theory model incorporating coupling between nitrogen-vacancy and xenon-vacancy color centers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

UNESE Data Analysis-Disko Elm Gas Transport Characteristics (NA-22 Quarterly Report)

Recently published papers have demonstrated the impact of sorption mechanisms on gas transport in the subsurface following an underground nuclear explosion. To include sorption processes in the multi-physics models of noble gas production and transport, researchers have conducted experiments of gas sorption in geologic materials and calibrated a linear (Henry’s law) sorption model for all gases in various geologic materials. As a part of Task #4, we requested the experimental data from Sandia Laboratories and derived a dual-mode (Henry’s absorption and Langmuir adsorption) sorption model. The derived model better describes the nonlinear sorption mechanism with much higher fitness with the experimental data. When gas concentrations are relatively low (in the conditions of field experiments or underground nuclear explosions) compared to those used sorption experiments, the nonlinear sorption model can be approximated as a linear sorption model. The equivalent Henry’s constant, which equals the product of Langmuir capacity and affinity, is systematically higher than the literature values. Further analyses and comparison of sorption models are planned in FY2020 Q4 and the sorption model will be coupled in models of nonisothermal multiphase transport for studying noble gas detectability.

58 GEOSCIENCES↗
DOE OSTI2023

Southern Ocean polynyas and dense water formation in a high-resolution, coupled Earth system model

Antarctic coastal polynyas produce dense shelf water, a primary source of Antarctic Bottom Water that contributes to the global overturning circulation. This paper investigates Antarctic dense water formation in the high-resolution version of the Energy Exascale Earth System Model (E3SM-HR). The model is able to reproduce the main Antarctic coastal polynyas, although the polynyas are smaller in area compared to observations. E3SM-HR also simulates several occurrences of open-ocean polynyas (OOPs) in the Weddell Sea at a higher rate than what the last 50 years of the satellite sea ice observational record suggests, but similarly to other high-resolution Earth system model simulations. Furthermore, the densest water masses in the model are formed within the OOPs rather than on the continental shelf as is typically observed. Biases related to the lack of dense water formation on the continental shelf are associated with overly strong atmospheric polar easterlies, which lead to a strong Antarctic Slope Front and too little exchange between on- and off-continental shelf water masses. Strong polar easterlies also produce excessive southward Ekman transport, causing a build-up of sea ice over the continental shelf and enhanced ice melting in the summer season. This, in turn, produces water masses on the continental shelf that are overly fresh and less dense relative to observations. Our results indicate that high resolution alone is insufficient for models to properly reproduce Antarctic dense water; the large-scale polar atmospheric circulation around Antarctica must also be accurately simulated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Scientific challenges to characterizing the wind resource in the marine atmospheric boundary layer

Abstract. With the increasing level of offshore wind energy investment, it is correspondingly important to be able to accurately characterize the wind resource in terms of energy potential as well as operating conditions affecting wind plant performance, maintenance, and lifespan. Accurate resource assessment at a particular site supports investment decisions. Following construction, accurate wind forecasts are needed to support efficient power markets and integration of wind power with the electrical grid. To optimize the design of wind turbines, it is necessary to accurately describe the environmental characteristics, such as precipitation and waves, that erode turbine surfaces and generate structural loads as a complicated response to the combined impact of shear, atmospheric turbulence, and wave stresses. Despite recent considerable progress both in improvements to numerical weather prediction models and in coupling these models to turbulent flows within wind plants, major challenges remain, especially in the offshore environment. Accurately simulating the interactions among winds, waves, wakes, and their structural interactions with offshore wind turbines requires accounting for spatial (and associated temporal) scales from O(1 m) to O(100 km). Computing capabilities for the foreseeable future will not be able to resolve all of these scales simultaneously, necessitating continuing improvement in subgrid-scale parameterizations within highly nonlinear models. In addition, observations to constrain and validate these models, especially in the rotor-swept area of turbines over the ocean, remains largely absent. Thus, gaining sufficient understanding of the physics of atmospheric flow within and around wind plants remains one of the grand challenges of wind energy, particularly in the offshore environment. This paper provides a review of prominent scientific challenges to characterizing the offshore wind resource using as examples phenomena that occur in the rapidly developing wind energy areas off the United States. Such phenomena include horizontal temperature gradients that lead to strong vertical stratification; consequent features such as low-level jets and internal boundary layers; highly nonstationary conditions, which occur with both extratropical storms (e.g., nor'easters) and tropical storms; air–sea interaction, including deformation of conventional wind profiles by the wave boundary layer; and precipitation with its contributions to leading-edge erosion of wind turbine blades. The paper also describes the current state of modeling and observations in the marine atmospheric boundary layer and provides specific recommendations for filling key current knowledge gaps.

17 WIND ENERGY↗
DOE OSTI2020

Consequence Analysis of Residual Water in a Storage Canister - 20484

Recent observations from projects sponsored under the DOE-Nuclear Energy Spent Fuel and Waste Disposition campaign show that residual free water, well above the 0.4 gm-moles that correspond to a 3 torr rebound pressure after a 30-minute hold following prototypic drying, may remain within SNF canisters used for long-term dry storage. Specifically, experimental observations in an Integrated Research Project showed subzero temperatures and a local pocket of frozen water in a mockup fuel assembly subjected to an industry practiced drying process. In gas sampling and analysis from the High Burnup (HBU) Demonstration project, using a fully loaded and dried SNF canister, indicated presence of 100 g of residual water had remained in the canister. The effects of residual water in terms of potential adverse impacts on the condition of the SNF and the canister internals during long-term dry storage has been rigorously evaluated to address inadvertent residual water contents. The impact of residual water on the fuel and canister internals, with a focus on the oxidation of the cladding and of postulated exposed (breached-clad) fuel, were evaluated using an integrated set of time-dependent environmental conditions with semi-empirical materials oxidation models. An 'integration model,' with coupled sub-models, developed and previously used by the Center for Nuclear Waste Regulatory Analysis (CNWRA), was applied and expanded with improved sub-models for water radiolysis, and for cladding and fuel oxidations. Cladding oxidation models for various alloys were developed using the rate constants for various cladding alloys in the dry storage temperature range. A burnup-dependent fuel oxidation model was developed; it accounted for inhibition effect of fission products on fuel oxidation rates. The potential for extension of the initial breach flaw (1 mm hole) was evaluated by two separate mechanics criteria. In the first case, a critical cladding strain criterion was used. In the second case, a critical stress intensity was used to evaluate stability of a planar axial flaw postulate. A failure condition exists when a sufficient amount of fuel oxidation (at the postulated breached-clad location) causes fuel pellet swelling to load the cladding to meet a mechanics criterion for flaw extension. The integration model's results provide the following insights. The radiolysis-generated oxygen is consumed with a partitioning between the cladding and the fuel. The extent of cladding oxidation is no more than 2 μm additional consumption of the cladding metal even with 10 moles of residual water, indicating that changes in cladding conditions due to water are expected to be negligible. The conditions for cladding failure (breach opening size extension) directly correlates with the extent of fuel oxidation. Fuel oxidation significant to extend the breach could occur even with 5.5 moles of residual water. The results indicate that fuel oxidation vis-a-vis cladding oxidation is more likely under a higher radiation field, i.e., when radiolytic decomposition of the residual water occurs in few years compared to several decades, and that the conditions to cause failure are increased with fuel and cladding temperatures approaching the peak storage temperature limit of 400 deg. C. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Retreat and Regrowth of the Greenland Ice Sheet During the Last Interglacial as Simulated by the CESM2‐CISM2 Coupled Climate–Ice Sheet Model

Abstract During the Last Interglacial, approximately 129 to 116 ka (thousand years ago), the Arctic summer climate was warmer than the present, and the Greenland Ice Sheet retreated to a smaller extent than its current state. Previous model‐derived and geological reconstruction estimates of the sea‐level contribution of the Greenland Ice Sheet during the Last Interglacial vary widely. Here, we conduct a transient climate simulation from 127 to 119 ka using the Community Earth System Model (CESM2), which includes a dynamic ice sheet component (the Community Ice Sheet Model, CISM2) that is interactively coupled to the atmosphere, land, ocean, and sea ice components. Vegetation distribution is updated every 500 years based on biomes simulated using a monthly climatology to force the BIOME4 equilibrium vegetation model. Results show a substantial retreat of the Greenland Ice Sheet, reaching a minimum extent at 121.9 ka, equivalent to a 3.0 m rise in sea level relative to the present day, followed by gradual regrowth. In contrast, a companion simulation employing static vegetation based on pre‐industrial conditions shows a much smaller ice‐sheet retreat, highlighting the importance of the changes in high‐latitude vegetation distribution for amplifying the ice‐sheet response.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Ocean and Sea Ice and their Interactions around Greenland and the West Antarctic Peninsula in Forced Fine-Resolution Global Simulations

Anomalously warm ocean waters have been implicated as the cause of accelerated ablation along the margin of the Greenland ice sheet, as well as the cause of increasing basal melt rate, mass loss, and grounding line retreat of many Antarctic ice shelves. The overarching science objective of this project is to investigate how the interplay of regional processes and decadal changes in local and remote forcing impact the delivery and end member composition of waters over the continental shelves of Greenland and Antarctica. To address this goal, an existing global eddy-active ocean general circulation model (OGCM), coupled to a thermodynamic/dynamic ice model and forced with atmospheric reanalysis fluxes from 1948-2009, was analyzed to understand these processes around the continental margins of Greenland and Antarctica. This simulation did not contain a representation of ice sheet melt or resolve mesoscale eddies over these continental margins, so two new coupled OGCM/sea-ice models were constructed and analyzed to address the roles of small scale features and processes (< 5km) and freshwater flux surpluses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A model of randomly-coupled Pauli spins

Abstract We construct a model of Pauli spin operators with all-to-all 4-local interactions by replacing Majorana fermions in the SYK model with spin operators. Equivalently, we replace fermions with hard-core bosons. We study this model numerically and compare the properties with those of the SYK model. We observe a striking quantitative coincidence between the spin model and the SYK model, which suggests that this spin model is strongly chaotic and, perhaps, can play some role in holography. We also discuss the path-integral approach with multi-local fields and the possibility of quantum simulations. This model may be an interesting target for quantum simulations because Pauli spins are easier to implement than fermions on qubit-based quantum devices.

Physics↗
DOE OSTI2024

New Developments of MOOSE/FENIX Capabilities for Fusion Neutronics Calculations

This poster summarizes internship work to support new developments of MOOSE/FENIX Capabilities for fusion neutronics calculations. A new feature was added to allow coupling OpenMC models with thermomechanics models and was verified. Two coupled multiphysics models are demonstrated for a tokamak model and monoblock divertor model. Results show heating results, temperature distributions, tritium production and transport.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Understanding Air-Sea Feedbacks to the MJO through Process Evaluation of Observations and Models (Final Report)

The goal of our project was to enhance our understanding of the role of coupling in the simulation of the Madden Julian Oscillation (MJO) in coupled climate models. We developed diagnostics of precipitation and Sea Surface Temperature variability in climate models and investigated how they are related to metrics of MJO simulation performance. We found a relationship between models with a high spatial coherence of precipitation and a good propagation of the MJO through the Maritime Continent region, but no relationship between metrics of precipitation organisation and intensity. Analysis of coupled and uncoupled model simulations from the Sixth Coupled Model Intercomparison Project (CMIP6) shows that coupling systematically improved the MJO simulation in both metrics that we investigated. We analysed the role of background moisture gradients in the MJO simulation performance following Lim et al. (2018) and found that although the model to model variation in moisture gradients to the west of Indonesia was related to model MJO performance, in general no single moisture gradient was as good at explaining a large fraction of MJO performance across the models as compared to a linear combination of those metrics, which was able to explain a significant fraction of the variance in the MJO performance. Those relationships were much stronger for coupled simulations than uncoupled simulations and stronger for those metrics that measured propagation of the MJO across the Maritime Continent than for overall MJO activity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Concurrent two-way coupling of global and local models across internal boundaries with non-matching discretizations

Coupling local and global models enables efficient simulation of multiscale systems, where global models capture large-scale behavior and local models, with enhanced physics, resolve finer details over a smaller region. Here, this paper presents a mathematically consistent method for coupling physics-based models of varying fidelity across adjacent, non-overlapping subdomains, even when discretizations do not match at the immersed interdomain interfaces. Incompressible Navier-Stokes equations (NSE) constitute the global model while residual-based turbulence model serves as the local high-fidelity model. In addition, a scalar advection-diffusion equation that models the convection of an active scalar field is appended to the turbulence model in the local domain. This scalar field does not have its complement in the global model, giving rise to unequal number of equations at the immersed boundary between local and global models. Interdomain coupling terms are derived via the Variational Multiscale Discontinuous Galerkin (VMDG) method with new developments in scale representation and efficient fine-scale estimation. While transient laminar flows modeled with NSE in the global domain can be resolved with relatively coarse mesh, turbulent flow calculations in the local model require much finer spatial discretizations as well as smaller time-step for appropriately resolving the turbulent flow physics. The proposed framework also accommodates non-matching meshes at the immersed boundaries. Test problems in 2D and 3D numerically showcase the concurrent two-way coupling of unknown fields across the immersed boundaries. The 3D test presents a case with an unequal number of equations, where the scalar field represents the convection of contaminant concentration. This provides more detailed physics in the local region and highlights its application in climate modeling and atmospheric sciences.

Variational Multiscale Discontinuous Galerkin (VMD↗
DOE OSTI2024

Coupled neutronics, thermochemistry, corrosion modeling and sensitivity analyses for isotopic evolution in molten salt reactors

This study presents a computational methodology for analyzing isotopic evolution and associated uncertainties in molten salt reactors (MSRs), focusing on both fluoride- and chloride-based fuel salts. The primary goal is to enhance the understanding of isotopic behavior in MSRs and provide data to support future experimental efforts. The methodology integrates transport-coupled depletion calculations using OpenMC, equilibrium thermodynamics modeling with Thermochimica, and a corrosion model. Sensitivity analyses are performed to evaluate the impact of power density, air ingress, and humidity content on isotopic evolution in MSR concepts. This study examines representative F- and Cl-based MSR designs, highlighting the dominant influence of power density on isotopic composition, which significantly affects isotope production and depletion rates, accounting for approximately 76% of the observed variance in element concentration. Air ingress and humidity content also affect the redox potential, solubility of heavier elements, and corrosion rates, thereby altering the expected isotopic evolution in the reactor. On average, air ingress accounts for around 17% of the variance in element concentrations, while humidity explains the remaining 7%. These variances differ significantly from element to element, depending on the element’s role in depletion, redox potential evolution, and galvanic corrosion. The findings indicate that power density, air ingress, and humidity content are all critical factors for optimizing reactor design and operational strategies. Furthermore, the study provides expected ranges for key impurities in the fuel salt, which are crucial for guiding future experimental studies and refining MSR designs. Finally, this study demonstrates the importance of modeling depletion coupled with the evolution of redox potential and chemical interactions in MSR fuel salts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗