SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We report a [3+2] cycloaddition using 3,6-bis-propargyloxy-1,2,4,5-tetrazine and azides to synthesize energetic polymers containing 1,2,4,5-tetrazine within the scaffold.
An efficient, column chromatography-free route for scale-up preparation of protected carbonyl containing biomass molecules is established. Then the protection group effect is investigated in multiple systems especially under a reducing atmosphere.
A new quaternary 3D chalcogenide, Na 2 Si 6 B 12 Se 18 , was synthesized via solid-state methods and features a unique framework containing the rare icosahedral [B 12 ] 10+ cation. The tunnels in this 3D framework structure are occupied by Na + ions.
Conjugated ladder polymers (CLPs) are difficult yet captivating synthetic targets due to their fully unsaturated fused backbones. Inherent challenges associated with their synthesis often lead to low yields, structural defects, and insoluble products. Here a new method to form CLPs is demonstrated, utilizing a high-yielding dimerization of annulated zirconacyclopentadienes to form cyclooctatetraene (COT) monomer units. The resulting COT-containing polymers form rapidly in a single ladderization step from the bis-zirconacyclopentadiene precursors and display M n up to 29.7 kg mol -1 . The polymers represent rare examples of CLPs with negatively curved rings, resulting in the observation of unusual properties. The rigid tub-shaped COT units embedded in the backbone imbue the polymers with microporosity, exhibiting BET surface areas up to 555 m 2 g -1 . Additionally, the remarkable solubility of these CLPs in organic solvents enables the fabrication of thin films showcasing high dielectric performance with a discharged energy density as high as 6.54 J cm -3 at 650 MV m -1 .
The development of elastomer-containing photoactive block copolymers with regulated rigid-block lengths results in organic solar cells with high power conversion efficiency (17.3%) and mechanical robustness (toughness = 1.8 MJ m −3 ).
Chemical recycling of condensation polymers is often rationalized on the basis of the intrinsic reactivity of ester and carbonate functional groups. However, under heterogeneous conditions relevant to plastic waste processing and environmental degradation, bulk depolymerization rates often diverge from trends predicted by homogeneous chemistry. Here, we investigate how polymer–solvent compatibility, catalyst strength, and phase behavior govern the heterogeneous glycolysis of carbonyl-containing polymers. Using poly(ethylene terephthalate) (PET), glycol-modified PET (PETG), and bisphenol-A polycarbonate (PC) as model systems, we examine depolymerization kinetics at 180 °C with ethylene glycol and bisphenol A as diols under both amphoteric organosalt (TBD : MSA) and strong base (TBD) catalysis. Despite substantial differences in crystallinity and glycol uptake, PET and PETG depolymerize at comparable rates under organosalt catalysis, while PC depolymerizes significantly more slowly under identical conditions. Time-resolved molecular weight analysis and thermal characterization demonstrate that these rate differences do not arise from crystallinity, swelling, or inherent carbonyl reactivity, but instead reflect solubility-limited kinetics that constrain the transition from heterogeneous to homogeneous reaction regimes. When polymer solubility is low, depolymerization remains heterogeneous and slow; when solubility is enhanced—either through increased polymer–diol compatibility or stronger base catalysis—rapid homogeneous depolymerization is observed, reversing apparent reactivity trends. These results establish solubility and phase behavior as primary determinants of depolymerization kinetics in heterogeneous polymer recycling systems. By demonstrating how catalyst selection and solvent compatibility can expose or overcome solubility limitations, this work provides mechanistic insight to design more energy-efficient and selective chemical recycling processes. More broadly, these findings suggest that polymers with limited solvent or water compatibility may resist chemical degradation in the environment, favoring fragmentation and persistence as micro- and nanoplastics. Understanding solubility-controlled depolymerization offers a pathway toward more sustainable polymer design and end-of-life chemical recovery.
In this work, the syntheses of bidentate and tripodal phosphine ligands containing aryl chlorides were achieved in 4 and 7 steps respectively, starting from diethyl malonate.
Liquid crystal elastomers (LCEs) hold a major promise as a versatile material platform for smart soft coatings, since their orientational order can be predesigned to program a desired dynamic profile. In this work, we introduce temperature-responsive dynamic coatings based on LCEs with arrays of singular defects-disclinations that run parallel to the surface. The disclinations form in response to antagonistic patterns of the molecular orientation at the top and bottom surfaces, imposed by the plasmonic mask photoalignment. Upon heating, an initially flat LCE coating develops linear microchannels located above each disclination. The stimulus that causes a non-flat profile of LCE coatings upon heating is the activation force induced by the gradients of molecular orientation around disclinations. To describe the formation of microchannels and their thermal response, we adopt a Frank-Oseen model of disclinations in patterned director field and propose a linear elasticity theory to connect the complex spatially-varying molecular orientation to the displacements of the LCE. The thermo-responsive surface profiles predicted by the theory and by the finite element modeling are in good agreement with the experimental data; in particular, higher gradients of molecular orientation produce a stronger modulation of the coating profile. The elastic theory and the finite element simulations allow us to estimate the material parameter that characterizes the elastomer coating’s response to the thermal activation. The disclinations containing LCEs show potential as soft dynamic coatings with a predesigned responsive surface profile.
To advance our quest to understand the role of low energy electrons in biomolecular systems, we performed investigations on dissociative electron attachment (DEA) to gas-phase N-ethylformamide (NEF) and N-ethylacetamide (NEA) molecules. Both molecules contain the amide bond, which is the linkage between two consecutive amino acid residues in proteins. Thus, their electron-induced dissociation can imitate the resonant behavior of the DEA process in more complex biostructures. Our experimental results indicate that in these two molecules, the dissociation of the amide bond results in a double resonant structure with peaks at ~5 eV and 9 eV. We also determined the energy position of resonant states for several negative ions, i.e., the other dissociation products from NEF and NEA. Our predictions of dissociation channels were supported by density functional theory calculations of the corresponding threshold energies. Our results and those previously reported for small amides and peptides imply the fundamental nature for breakage of the amide bond through the DEA process.
VV10 is a powerful nonlocal density functional for long-range correlation that is used to include dispersion effects in many modern density functionals, such as the meta-generalized gradient approximation (mGGA), B97M-V, the hybrid GGA, ωB97X-V, and the hybrid mGGA, ωB97M-V. While energies and analytical gradients for VV10 are already widely available, this study reports the first derivation and efficient implementation of the analytical second derivatives of the VV10 energy. The additional compute cost of the VV10 contributions to analytical frequencies is shown to be small in all but the smallest basis sets for recommended grid sizes. Here, this study also reports the assessment of VV10-containing functionals for predicting harmonic frequencies using the analytical second derivative code. The contribution of VV10 to simulating harmonic frequencies is shown to be small for small molecules but important for systems where weak interactions are important, such as water clusters. In the latter cases, B97M-V, ωB97M-V, and ωB97X-V perform very well. The convergence of frequencies with respect to the grid size and atomic orbital basis set size is studied, and recommendations are reported. Finally, scaling factors to allow comparison of scaled harmonic frequencies with experimental fundamental frequencies and to predict zero-point vibrational energy are presented for some recently developed functionals (including r2SCAN, B97M-V, ωB97X-V, M06-SX, and ωB97M-V).
In 2015, monoclonal antibodies (mAbs) that selectively recognize the 1-pHis or 3-pHis isoforms of phosphohistidine were developed by immunizing rabbits with degenerate Ala/Gly peptides containing the nonhydrolyzable phosphohistidine (pHis) analog- phosphotriazolylalanine (pTza). Here, we report structures of five rabbit mAbs bound to cognate pTza peptides: SC1-1 and SC50-3 that recognize 1-pHis, and their 3-pHis–specific counterparts, SC39-4, SC44-8, and SC56-2. These cocrystal structures provide insights into the binding modes of the pTza phosphate group that are distinct for the 1- and 3-pHis mAbs with the selectivity arising from specific contacts with the phosphate group and triazolyl ring. The mode of phosphate recognition in the 3-pHis mAbs recapitulates the Walker A motif, as present in kinases. The complementarity-determining regions (CDRs) of four of the Fabs interact with the peptide backbone rather than peptide side chains, thus conferring sequence independence, whereas SC44-8 shows a proclivity for binding a GpHAGA motif mediated by a sterically complementary CDRL3 loop. Specific hydrogen bonding with the triazolyl ring precludes recognition of pTyr and other phosphoamino acids by these mAbs. Kinetic binding experiments reveal that the affinity of pHis mAbs for pHis and pTza peptides is submicromolar. Bound pHis mAbs also shield the pHis peptides from rapid dephosphorylation. The epitope–paratope interactions illustrate how these anti-pHis antibodies are useful for a wide range of research techniques and this structural information can be utilized to improve the specificity and affinity of these antibodies toward a variety of pHis substrates to understand the role of histidine phosphorylation in healthy and diseased states.
Thin-film deposition from chemically reactive multi-component plasmas is complex, and the lack of electron collision cross-sections for even the most common metalorganic precursors and their fragments complicates their modeling based on fundamental plasma physics. This study focuses on understanding the plasma physics and chemistry in argon (Ar) plasmas containing lithium bis (trimethylsilyl) amide used to deposit Li x Si y thin films. These films are emerging as potential solid electrolytes for lithium-ion batteries, and the Li-to-Si ratio is a crucial parameter to enhance their ionic conductivity. We deposited Li x Si y films in an axial flow-through plasma reactor and studied the factors that determine the variation of the Li-to-Si ratio in films deposited at various points on a substrate spanning the entire reactor axis. While the Li-to-Si ratio is 1:2 in the precursor, the Li-to-Si ratio is as high as 3:1 in films deposited near the plasma entrance and decreases to 1:1 for films deposited downstream. Optical emission from the plasma is dominated by Li emission near the entrance, but Li emission disappears downstream, which we attribute to the complete consumption of the precursor. We hypothesized that the axially decreasing precursor concentration affects the electron energy distribution function in a way that causes different dissociation efficiencies for the production of Li and Si. We used Li line intensities to estimate the local precursor concentration and Ar line ratios to estimate the local reduced electric field to test this hypothesis. This analysis suggests that the mean electron energy increases along the reactor axis with decreasing precursor concentration. As a result, the decreasing Li-to-Si ratio with axially decreasing precursor concentration may be explained by Li release from the precursor having lower threshold energy than Si release.
The required heating power, $P_{\mathrm{LH}}$, to access the high confinement regime (H-mode) in tritium containing plasmas is investigated in JET with ITER-like wall at a toroidal magnetic field of $B_t = 1.8$ T and a plasma current of $I_p = 1.7$ MA. $P_{\mathrm{LH}}$, also referred to as the L-H power threshold, is determined in plasmas of pure tritium as well as mixtures of hydrogen with tritium (H-T) and mixtures of deuterium with tritium (D-T), and is compared to the L-H power threshold in plasmas of pure hydrogen and pure deuterium. It is found that, for otherwise constant parameters, $P_{\mathrm{LH}}$ is not the same in plasmas with the same effective isotope mass, $A_{\mathrm{eff}}$, when they differ in their isotope composition. Thus, $A_{\mathrm{eff}}$ is not sufficient to describe the isotope effect of $P_{\mathrm{LH}}$ in a consistent manner for all considered isotopes and isotope mixtures. The electron temperature profiles measured at the L-H transition in the outer half of the radius are very similar for all isotopes and isotope mixtures, despite the fact that the L-H power threshold varies by a factor of about six. This finding, together with the observation of an offset linear relation between the L-H power threshold, $P_{\mathrm{LH}}$, and an effective heat diffusivity, $\chi_{\mathrm{eff}}$, indicates that the composition-dependent heat transport in the low confinement mode (L-mode) determines, how much power is needed to reach the necessary electron temperatures at the edge, and hence $P_{\mathrm{LH}}$.
In this work, we describe algorithms developed to isolate and accurately reconstruct two-track events that are contained within the MicroBooNE detector. This method is optimized to reconstruct two tracks of lengths longer than 5cm. This code has applications to searches for neutrino oscillations and measurements of cross sections using quasi-elastic-like charged current events. The algorithms we discuss will be applicable to all detectors running in Fermilab's Short Baseline Neutrino program (SBN), and to any future liquid argon time projection chamber (LArTPC) experiment with beam energies ~ 1 GeV. The algorithms are publicly available on a GITHUB repository. This reconstruction offers a complementary and independent alternative to the Pandora reconstruction package currently in use in LArTPC experiments, and provides similar reconstruction performance for two-track events.
Abstract Stable isotope ratios of H ( δ 2 H ), O ( δ 18 O), and C ( δ 13 C) are linked to key biogeochemical processes of the water and carbon cycles; however, the degree to which isotope-associated processes are reflected in macroscale ecosystem flux observations remains unquantified. Here through formal information assessment, new measurements of δ 13 C of net ecosystem exchange ( NEE ) as well as δ 2 H and δ 18 O of latent heat ( LH ) fluxes across the United States National Ecological Observation Network (NEON) are used to determine conditions under which isotope measurements are informative of environmental exchanges. We find all three isotopic datasets individually contain comparable amounts of information about NEE and LH fluxes as wind speed observations. Such information from isotope measurements, however, is largely unique. Generally, δ 13 C provides more information about LH as aridity increases or mean annual precipitation decreases. δ 2 H provides more information about LH as temperatures or mean annual precipitation decreases, and also provides more information about NEE as temperatures decrease. Overall, we show that the stable isotope datasets collected by NEON contribute non-trivial amounts of new information about bulk environmental fluxes useful for interpreting biogeochemical and ecohydrological processes at landscape scales. However, the utility of this new information varies with environmental conditions at continental scales. This study provides an approach for quantifying the value adding non-traditional sensing approaches to environmental monitoring sites and the patterns identified here are expected to aid in modeling and data interpretation efforts focused on constraining carbon and water cycles’ mechanisms.
Electronic structure calculations based on density functional theory (DFT) give quantitatively accurate predictions of properties of most materials containing light elements. For heavy materials, and in particular for f -electron systems, DFT based methods can fail both qualitatively and quantitatively for two distinct reasons: their failure to describe confinement effects arising from localized f -electron behavior and their incomplete or approximate treatment of relativity. In addition, different methods for incorporating relativistic effects, which give identical results in most light materials, can give different predictions in heavy elements. In order to develop a quantitative capability for calculating the properties of these materials, it is essential to separate the predictions of the underlying equations from the uncertainty introduced in approximations used in computation. Working toward that goal, here we have developed a code, called dirac-fp , which is based directly on solving the Dirac-Kohn-Sham equations and uses the full-potential linear muffin-tin orbital (FP-LMTO) approach to electronic structure. In order to assess the performance of dirac-fp , we perform calculations on three different face-centered cubic materials using different approximate treatments of relativity: the scalar relativistic (SR) approach commonly used in most solid-state DFT codes, the scalar relativistic plus spin-orbit coupling corrections (SR+SO) approach which includes spin-orbit coupling self-consistently using the SR states inside the muffin tins, and the Dirac-Kohn-Sham (Dirac) approach implemented in dirac-fp . Performing calculations on thorium, in which relativistic effects should be strong, aluminum, in which relativistic effects should be negligible, and gold, in which relativistic effects play an intermediate role, we find that the Dirac approach is able to provide theoretically consistent results in the electronic structure and ground-state properties across all three materials.
Scattering amplitudes for the simplest theory of colored scalar particles—the Tr ( Φ 3 ) theory—have recently been the subject of active investigations. In this work we describe an unanticipated wider implication of this work: the Tr ( Φ 3 ) theory secretly contains nonlinear sigma model (NLSM) amplitudes to all loop orders. The NLSM amplitudes are obtained from Tr ( Φ 3 ) amplitudes by a unique shift of kinematic variables. We show that this shifted kinematics produces amplitudes for a cubic theory with a linear term in the potential, with extrema spontaneously breaking U ( N ) → U ( N − k ) × U ( k ) . The Goldstone amplitudes for this theory coincide with those of pions in the U ( N ) × U ( N ) → U ( N ) chiral Lagrangian to all orders in the planar limit. We also give a purely on-shell understanding of this correspondence, showing that integrands defined by the kinematic shifts have the correct residues on poles and appropriately produce the Adler zero. Finally, we discuss how similar kinematic shifts produce certain infinite classes of mixed amplitudes of pions and Tr ( Φ 3 ) scalars, most of which are not interpretable from the Lagrangian description. Published by the American Physical Society 2024
Uranium speciation and redox behaviour is of critical importance in the nuclear fuel cycle. X-ray absorption near-edge spectroscopy (XANES) is commonly used to probe the oxidation state and speciation of uranium, and other elements, at the macroscopic and microscopic scale, within nuclear materials. Two-dimensional (2D) speciation maps, derived from microfocus X-ray fluorescence and XANES data, provide essential information on the spatial variation and gradients of the oxidation state of redox active elements such as uranium. In the present work, we elaborate and evaluate approaches to the construction of 2D speciation maps, in an effort to maximize sensitivity to the U oxidation state at the U L 3 -edge, applied to a suite of synthetic Chernobyl lava specimens. Our analysis shows that calibration of speciation maps can be improved by determination of the normalized X-ray absorption at excitation energies selected to maximize oxidation state contrast. The maps are calibrated to the normalized absorption of U L 3 XANES spectra of relevant reference compounds, modelled using a combination of arctangent and pseudo-Voigt functions (to represent the photoelectric absorption and multiple-scattering contributions). We validate this approach by microfocus X-ray diffraction and XANES analysis of points of interest, which afford average U oxidation states in excellent agreement with those estimated from the chemical state maps. This simple and easy-to-implement approach is general and transferrable, and will assist in the future analysis of real lava-like fuel-containing materials to understand their environmental degradation, which is a source of radioactive dust production within the Chernobyl shelter.