Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONFIGURABLE APPLICATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Logical memory address regions

Systems, apparatuses, and methods for implementing logical memory address regions in a computing system. The physical memory address space of a computing system may be partitioned into a plurality of logical memory address regions. Each logical memory address region may be dynamically configured at run-time to meet changing application needs of the system. Each logical memory address region may also be configured separately from the other logical memory address regions. Each logical memory address region may have associated parameters that identify region start address, region size, cell-level mode, physical-to-device mapping scheme, address masks, access permissions, wear-leveling data, encryption settings, and compression settings. These parameters may be stored in a table which may be used when processing memory access requests.

97 MATHEMATICS AND COMPUTING↗

Offshore Wind ENergy Simulation Toolkit (OWENS)

SAND2021-2751 O The Offshore Wind ENergy Simulation Toolkit (OWENS) is a collection of aerodynamic, structural, hydrodynamic, drivetrain, controls, composite structure and mesh preprocessing, and data postprocessing. OWENS is primarily an ontology, or glue code, pulling together many open-source and Sandia-developed libraries to model the aero-servo-hydro-elastic physics of wind and marine energy turbines. The toolkit’s intended use is for arbitrary aeroelastic rotor configurations analysis including vertical-axis wind turbines, horizontal-axis wind turbines, and analogous marine energy applications for fixed-bottom and floating configurations. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525

Owens, Brian↗

Vortical flow management for improved configuration aerodynamics: Recent experiences

Recent progress in vortex-control applications for alleviating the adverse consequences of three dimensional separation and vortical interactions on slender body/swept wing configurations is reported. Examples include helical separation trip to alleviate the side force due to forebody vortex asymmetry; hinged strakes to avoid vortex breakdown effects; compartmentation of swept leading edge separation to delay the pitch-up instability; under wing vortex trip and vortex trip and vortex flaps for drag reduction at high lift; and an apex-flap trimmer to fully utilize the lift capability of trailing-edge flaps for take off and landing of delta wings. Experimental results on generic wind-tunnel models are presented to illustrate the vortex-management concepts involved and to indicate their potential for enhancing the subsonic aerodynamics of supersonic-cruise type vehicles.

Rao, D. M.↗

Exploring the interoperability of remote GPGPU virtualization using rCUDA and directive-based programming models

Directive-based programming models, such as OpenMP, OpenACC, and OmpSs, enable users to accelerate applications by using coprocessors with little effort. These devices offer significant computing power, but their use can introduce two problems: an increase in the total cost of ownership and their underutilization because not all codes match their architecture. Remote accelerator virtualization frameworks address those problems. In particular, rCUDA provides transparent access to any graphic processor unit installed in a cluster, reducing the number of accelerators and increasing their utilization ratio. Joining these two technologies, directive-based programming models and rCUDA, is thus highly appealing. In this work, we study the integration of OmpSs and OpenACC with rCUDA, describing and analyzing several applications over three different hardware configurations that include two InfiniBand interconnections and three NVIDIA accelerators. Our evaluation reveals favorable performance results, showing low overhead and similar scaling factors when using remote accelerators instead of local devices.

97 MATHEMATICS AND COMPUTING↗

Performance of sweeping gas membrane distillation for treating produced water: Modeling and experiments

Membrane distillation (MD) has shown promise for desalination of produced water (PW), but there are very few studies reported on the performance of MD with real PW and the characteristics of the fouling and scaling in MD. Among different MD configurations, sweeping gas MD (SGMD) is the least studied configuration. Here we report the application of SGMD for treating high-salinity PW (123 g L -1 ). The SGMD operating conditions were first carefully optimized through pure water MD experiments by varying operating conditions. The flux evaluation was accompanied by a detailed Aspen Custom Modeler simulation based on the electrolyte-NRTL thermodynamic model to better understand the heat and mass transfer in the feed and permeate channel. Supported by experiments, modeling results confirmed the partial condensation of the vapor in the permeate channel. Furthermore, it was concluded that the saturation of the sweeping gas is controlling the overall mass transfer through the membrane. Selected membranes and optimized conditions were then used to conduct short-term and long-term performance tests with PW. In long-term MD test, the concentration of the PW increased by a factor of two (50% water recovery), while the membrane exhibited small flux decline. Elemental analysis showed that strontium and sodium were the major scalant compounds.

42 ENGINEERING↗

Assessing barotrauma in neutrally and negatively bouyant juvenile salmonids exposed to simulated hydro-turbine passage using a mobile aquatic barotrauma laboratory

Barotrauma, injuries sustained following rapid decompression, occurs in many different fisheries applications. Previous attempts to quantify barotrauma in fish have been limited by hyper/hypobaric system function. Further, field studies are often confounded by covariates. The Mobile Aquatic Barotrauma Laboratory (MABL) was designed to address these limitations. Specifically, this testing facility allows the user to evaluate similar complex pressure scenarios that migrating juvenile salmonids are exposed to following turbine or spillway passage. In addition, factors including total dissolved gas, temperature, and acclimation pressure are controlled automatically with this mobile lab. In this paper we also present a case study where negative and neutrally buoyant juvenile Chinook salmon were exposed to simulated hydro-turbine passage (STP). Gill emboli, swim bladder rupture, mortality, and internal haemorrhaging were used as end points. The severity of the decompression profile and the fish’s ability to gain neutral buoyancy were used as predictor variables. We determined that fish that achieved neutral buoyancy during a 16 hour acclimation period had a greater risk of injury following STP than negatively buoyant conspecifics. This research solidifies the need to allow fish to become neutrally buoyant when assessing barotrauma and mortality in field and laboratory applications. Finally, MABL can be configured to examine a variety of different species and pressure profiles, and physical parameters in a controlled environment.

59 BASIC BIOLOGICAL SCIENCES↗

Measurement of neutron and gamma-ray cross-correlation functions with 4 He detectors

For the first time, the neutron and gamma-ray time-dependent cross-correlation distributions from spontaneous fission and (α, n) neutron sources are measured with the 4 He fast neutron detectors. The pulse shape discrimination technique based on charge comparison is utilized to discriminate between neutrons and gamma-rays in the identification of the four possible correlated pairs: (γ, γ), (n, n), (γ, n), and (n, n). Both total and individual cross-correlation functions are obtained, and their shapes can be easily distinguished among different neutron sources. The (n, n) and (γ, n) correlations are selectively analyzed and the peak position of the (n, n) and (γ, n) pairs shows a linear correlation with source-detector distance. Here, the measurements illustrate the feasibility of using 4 He detectors to identify nuclear materials and their geometrical configurations, as well as other applications in nuclear nonproliferation and safeguards. In particular, the (n, n) correlated data can be very clearly assayed even in the presence of significant gamma fields without the use of shielding.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Direct numerical simulation of flame stabilization downstream of a transverse fuel jet in cross-flow

A reactive transverse fuel jet in cross-flow (JICF) configuration is studied using three-dimensional direct numerical simulation (DNS) with detailed chemical kinetics in order to investigate the mechanism of flame stabilization in the near field of a fuel jet nozzle. JICF configurations are used in practical applications where high mixing rates are desirable between the jet and the cross-flow fluids such as fuel injection nozzles and dilution holes in gas turbine combustors. This study examines a nitrogen-diluted hydrogen transverse jet exiting a square nozzle perpendicularly into a cross-flow of heated air. Improved understanding of the flame stabilization mechanism acting downstream of the transverse fuel jet will enable the formulation of more reliable guidelines for design of fuel injection nozzles which promote intrinsic flashback safety by reducing the likelihood of the flame anchoring at the injection site. The core of the heat release is located near the trailing edge of the fuel jet, at approximately 4 nozzle diameters away from the wall, and is characterized by the simultaneous occurrence of locally stoichiometric reactants and low flow velocities in the mean.The location where the most upstream tendrils of the flame are found is in the region where coherent vortical structures originating from the jet shear layer interaction are present. Instantaneously, upstream flame movement is observed through propagation into the outer layers of jet vortices.

Energy & Fuels↗

Development of On-Line Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes

Knowledge of real-time solution properties and composition is a necessity for any spent nuclear fuel reprocessing method. Metal-ligand speciation in aqueous solutions derived from the dissolved commercial spent fuel is highly dependent upon the acid concentration/pH, which influences extraction efficiency and the resulting speciation in the organic phase. Spectroscopic process monitoring capabilities, incorporated in a counter current centrifugal contactor bank, provide a pathway for on-line real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for on-line applications, while classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Our research is focused on developing a general method for on-line determination of pH of aqueous solutions through chemometric analysis of Raman spectra. Interpretive quantitative models have been developed and validated under the range of chemical composition and pH using a lactic acid/lactate buffer system. The developed model was applied to spectra obtained on-line during solvent extractions performed in a centrifugal contactor bank. The model predicted the pH within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH on-line in applications such as nuclear fuel reprocessing.

pH, spectroscopic monitoring, on-line monitoring, ↗

High-entropy engineering of the crystal and electronic structures in a Dirac material

Dirac and Weyl semimetals are a central topic of contemporary condensed matter physics, and the discovery of new compounds with Dirac/Weyl electronic states is crucial to the advancement of topological materials and quantum technologies. Here we show a widely applicable strategy that uses high configuration entropy to engineer relativistic electronic states. We take the A MnSb 2 ( A = Ba, Sr, Ca, Eu, and Yb) Dirac material family as an example and demonstrate that mixing of Ba, Sr, Ca, Eu and Yb at the A site generates the compound (Ba 0.38 Sr 0.14 Ca 0.16 Eu 0.16 Yb 0.16 )MnSb 2 (denoted as A 5 MnSb 2 ), giving access to a polar structure with a space group that is not present in any of the parent compounds. A 5 MnSb 2 is an entropy-stabilized phase that preserves its linear band dispersion despite considerable lattice disorder. Although both A 5 MnSb 2 and A MnSb 2 have quasi-two-dimensional crystal structures, the two-dimensional Dirac states in the pristine A MnSb 2 evolve into a highly anisotropic quasi-three-dimensional Dirac state triggered by local structure distortions in the high-entropy phase, which is revealed by Shubnikov–de Haas oscillations measurements.

36 MATERIALS SCIENCE↗

Switchable geometric frustration in an artificial-spin-ice–superconductor heterosystem

Geometric frustration emerges when local interaction energies in an ordered lattice structure cannot be simultaneously minimized, resulting in a large number of degenerate states. The numerous degenerate configurations may lead to practical applications in microelectronics(1), such as data storage, memory and logic(2). However, it is difficult to achieve very high degeneracy, especially in a two-dimensional system(3,4). Here, we showcase in situ controllable geometric frustration with high degeneracy in a two-dimensional flux-quantum system. We create this in a superconducting thin film placed underneath a reconfigurable artificial-spin-ice structure(5). The tunable magnetic charges in the artificial-spin-ice strongly interact with the flux quanta in the superconductor, enabling switching between frustrated and crystallized flux quanta states. The different states have measurable effects on the superconducting critical current profile, which can be reconfigured by precise selection of the spin-ice magnetic state through the application of an external magnetic field. We demonstrate the applicability of these effects by realizing a reprogrammable flux quanta diode. The tailoring of the energy landscape of interacting 'particles' using artificial-spin-ices provides a new paradigm for the design of geometric frustration, which could illuminate a path to control new functionalities in other material systems, such as magnetic skyrmions(6), electrons and holes in two-dimensional materials(7,8), and topological insulators(9), as well as colloids in soft materials(10-13).

Wang, Yong-Lei (ORCID:0000000303917757)↗

A Branch and Bound Approach for Truss Topology Design Problems with Valid Inequalities

One of the classical problems in the structural optimization field is the Truss Topology Design Problem (TTDP) which deals with the selection of optimal configuration for structural systems for applications in mechanical, civil, aerospace engineering, among others. In this paper we consider a TTDP where the goal is to find the stiffest truss, under a given load and with a bound on the total volume. The design variables are the cross-section areas of the truss bars that must be chosen from a given finite set. This results in a large-scale non-convex problem with discrete variables. This problem can be formulated as a Semidefinite Programming Problem (SDP problem) with binary variables. We propose a branch and bound algorithm to solve this problem. In this paper it is considered a binary formulation of the problem, to take advantage of its structure, which admits a Knapsack problem as subproblem. Thus, trying to improve the performance of the Branch and Bound, at each step, some valid inequalities for the Knapsack problem are included.

42 ENGINEERING↗

Investigation of a high spatial resolution method based on polar coordinate maximum entropy method for analyzing electron density fluctuation data measured by laser phase contrast

Laser phase contrast is a powerful diagnostic method to determine the spatial distribution of electron density fluctuations in magnetically confined plasmas, although its applicability depends on magnetic field configurations. The spatial resolution of fluctuations is linked with the resolution of the propagation direction that is derived from the two-dimensional spectral analysis of the wavenumber for the fluctuations. The method was applied to fluctuation measurements in a compact helical system. In order to improve the resolution of the propagation direction with a relatively small number of data points, the maximum entropy method with polar coordinates was employed. A spatial resolution of the order of 1 cm was obtained, which is satisfactory in a plasma with a 20 cm minor radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hanle effect as candidate for measuring magnetic fields in laboratory plasmas

Weak or turbulent magnetic fields are generally difficult to measure in laboratory plasmas. A new technique to address this problem may be based on the Hanle effect, used for magnetic field measurements in solar and stellar atmospheres. The effect consists in the modification of the polarization state of the resonance-line scattered radiation. It applies for magnetic field strengths for which the shift of magnetic sublevels remains comparable to the natural width of the sublevels. Experimental configurations and parameter ranges of applicability of a Hanle effect-based diagnostics technique are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Numerical simulation of magnetized jet creation using a hollow ring of laser beams

Three dimensional FLASH magneto-hydrodynamic modeling is carried out to interpret the OMEGA laser experiments of strongly magnetized, highly collimated jets driven by a ring of 20 OMEGA beams. The predicted optical Thomson scattering spectra and proton images are in good agreement with a subset of the experimental data. Here, magnetic fields generated via the Biermann battery term are amplified at the boundary between the core and the surrounding of the jet. The simulation predicts multiple axially aligned magnetic flux ropes with an alternating poloidal component. Future applications of the hollow ring configuration in laboratory astrophysics are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast-timing microchannel plate photodetectors: design, fabrication and characterization

We report a detailed design, fabrication, and characterization of 6 x 6 cm(2) fast timing photodetectors based on next-generation microchannel plates (MCPs). The whole assembly is made of low-cost borosilicate glass materials and hermetically sealed with a bialkali photocathode in a vacuum. The flexible photodetector design provides the potential of modifying individual components as well as the entire configuration to fit for different applications. A series of prototype MCP-photodetectors were fabricated following a step-by-step process including functionalization of glass capillary array through atomic layer deposition, MCP baking and scrubbing, photocathode deposition, and hermetic thermo-compression sealing. The prototype MCP-photodetectors exhibit electron gains well beyond 107 level with good relative uniformity. An excellent rise time of 439 ps, timing distribution root-mean-square at a single photoelectron mode of 105 ps, a timing resolution of 20 ps, and magnetic field tolerance up to 1.3 T were achieved for a photodetector with 10 mu m pore size MCPs, comparing to that of 536 ps, 205 ps, 63 ps, and 0.7 T for the one with 20 mu m pore size MCPs. Published under license by AIP Publishing.

fast timing↗

New method to design stellarator coils without the winding surface

Finding an easy-to-build coils set has been a critical issue for stellarator design for decades. Conventional approaches assume a toroidal 'winding' surface, but a poorly chosen winding surface can unnecessarily constrain the coil optimization algorithm, This article presents a new method to design coils for stellarators. Each discrete coil is represented as an arbitrary, closed, one-dimensional curve embedded in three-dimensional space. A target function to be minimized that includes both physical requirements and engineering constraints is constructed. The derivatives of the target function with respect to the parameters describing the coil geometries and currents are calculated analytically. A numerical code, named flexible optimized coils using space curves (FOCUS), has been developed. Furthermore, applications to a simple stellarator configuration, W7-X and LHD vacuum fields are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗