Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Effects of penta‐coordinated Al 3+ sites and Ni defective sites on Ni/ Al 2 O 3 for CO methanation

Abstract Engineering sophisticated structure of Al 2 O 3 and controlling the structure of counterpart metal active sites remain challenges to achieve a high catalytic‐performance in heterogeneous catalysis. Herein, we present a confinement strategy to stabilize homogeneous Ni by penta‐coordinated Al 3+ anchoring sites in Al 2 O 3 . This approach is involved in using a metal–organic framework as host to load Ni 2+ ions, by the aim of producing a confined Ni/Al 2 O 3 catalyst after a standard calcination. Metal–support interaction between Ni and Al 2 O 3 was tailored to be medium to avoid the formation of inactive NiAl 2 O 4 , which favors the generation of more available Ni active sites accessible to the reactants. The resultant Ni/Al 2 O 3 exhibited superior catalytic performance in comparison with the control Ni/Al 2 O 3 in CO methanation owing to the presence of defective sites on sufficient Ni 0 surface. Furthermore, the presence of oxygen vacancies on Al 2 O 3 and hydrogen spillover contributed toward excellent coke resistance properties in the reaction.

Engineering↗

Design and optimization of processes for recovering rare earth elements from end‐of‐life permanent magnets

Recovery of rare earth elements (REEs) from end-of-life (EOL) products represents a strategic opportunity to strengthen the domestic supply chain for rare earth elements. This work presents a superstructure-based optimization framework for finding the most economical processing pathway for different EOL rare earth permanent magnets (REPMs). The framework evaluates state-of-the-art technologies across four processing stages—disassembly, demagnetization, leaching and extraction, and precipitation and calcination—using net present value (NPV) maximization and cost of recovery (COR) minimization objectives. A novel bottom-up costing framework for hydrogen decrepitation is also introduced. Two feedstocks were considered: REPMs from EOL hard disk drives (HDDs), and electric and hybrid electric vehicles (EVs and HEVs). While HDD recycling proved unprofitable due to limited feedstock availability, EVs/HEVs were profitable across a range of parameters and cost estimates. Therefore, our findings suggest that the proposed EOL EV/HEV recycling process may be economical and is worthy of further investigation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Surfactant-assisted stabilization of Au colloids on solids for heterogeneous catalysis

Here, the stabilization of surfactant-assisted synthesized colloidal noble metal nanoparticles (NPs, e.g., Au NPs) on solids is a promising strategy for preparing supported nanocatalysts for heterogeneous catalysis because of their uniform particle sizes, controllable shapes, and tunable compositions. However, the removal of surfactants to obtain clean surfaces for catalysis through traditional approaches (e.g., solvent extraction and thermal decomposition) can easily induce the sintering of NPs, greatly hampering their use in synthesis of novel catalysts. Herein, we demonstrate that such unwanted surfactants can be utilized to stabilize NPs on solids via a simple yet efficient thermal annealing strategy. After being annealed in N 2 flow, the surface-bound surfactants are in situ carbonized as sacrificial architectures that form a conformal coating on NPs and assist in creating an enhanced metal-support interaction between NPs and substrate, thus slowing down the Ostwald ripening process during post-oxidative calcination to remove surface covers.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Supported Cobalt-Manganese Nanoparticles as Model Catalysts for Fischer-Tropsch Synthesis

Supported Co is an effective catalyst for the Fischer-Tropsch synthesis of various hydrocarbon products that can be converted to diesel. Recent studies have shown that the formation of methane can be suppressed and the formation of C 5+ products enhanced by promoting Co with Mn. Because the activity and product selectivity of Co-based catalysts are dependent on the size of Co nanoparticles and the extent of Co promotion by Mn, it is desirable to understand these effects by investigating the performance of Co nanoparticles with well-defined size and elemental composition. The present study was undertaken with the aim of producing well-defined nanoparticles of Co and Co-Mn and then supporting them on silica. Co and Co-Mn particles were synthesized through the polyol reduction of Co and Mn acetylacetonates. By controlling synthesis conditions, Co particles with diameters of 7-10 nm and similarly sized Co-Mn (Mn/Co=0.1) particles were prepared. XRD and elemental mapping with scanning TEM-energy-dispersive X-ray spectroscopy and scanning TEM-electron energy loss spectroscopy studies suggested that most of the Mn species was associated with the Co particles. Ex situ prepared Co and Co-Mn nanoparticles were first supported on silica and then investigated for the catalytic activity for the Fischer-Tropsch synthesis. The turnover frequencies and product distributions obtained with silica-supported Co and Co-Mn nanoparticles were similar to those obtained with catalysts prepared by using the conventional incipient wetness impregnation method. However, the rate of CO consumption per mass of Co was much lower for the catalysts produced by supporting ex situ prepared nanoparticles. This effect was attributed to the sintering of the nanoparticles during their calcination and reduction. Magnetic interactions among nanoparticles during their immobilization and thermal pretreatment were identified as the primary cause of sintering. Balancing yin and yang energy: The immobilization of well-defined cobalt-manganese nanoparticles on porous supports leads to the formation of Fischer-Tropsch catalysts with turnover frequencies and product selectivities comparable to those of conventionally prepared catalysts. The catalytic activity per cobalt mass is found to be significantly lower owing to sintering. Finally, magnetic interactions among nanoparticles during immobilization and thermal pretreatment are identified as the primary cause of this phenomenon.

cobalt↗

Development of Highly Selective Support for CO Hydrogenation to Light Olefins with Partially Passivated Iron Catalysts

To rule out disturbances from water=soluble efficient promoters (e. g., K 2 O or combination of S/Na), a simplified iron/support catalyst system was employed to investigate novel supports for the catalytic conversion of syngas (CO+H 2 ) to light olefins (FTO). A series of supports with nominal compositions of ZnAl 2 O 4 ∙ x Al 2 O 3 ( x =1, 2, 3) were prepared by coprecipitation and subsequent high temperature calcination at 1200 °C for 24 h to generate partially passivated ZnAl 2 O 4 and Al 2 O 3 phases, through which each formed component of a catalyst may minimize interactions among them and exhibit unique activity. Iron catalysts were prepared by incipient wetness of iron salts over these supports. At a total pressure of ca. 20 bar and a CO conversion of 35 %, a catalyst with a nominal composition of 15 %Fe/85 %(ZnAl 2 O 4 ∙ 3Al 2 O 3 ) exhibits a surprising C 2 = -C 4 = hydrocarbon distribution of 58 %, which reaches a huge increase by almost 100 % in comparison with iron catalysts over regular supports (e. g., carbon, gamma-Al 2 O 3 , etc.). This catalyst demonstrates the 1200 °C passivated ZnAl 2 O 4 ∙ 3Al 2 O 3 as probably the most selective support material for iron-based FTO catalysts. At CO conversion of 35 %, the contents of ethylene in C 2 , propylene in C 3 , and butylene in C 4 products achieve extraordinary values of 82%, 92%, and 91%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Deactivation of Ag–ZrO 2 /SiO 2 Catalysts for the Single-step Conversion of Ethanol to Butenes

Ag–ZrO 2 /SBA-16 has recently been found to be efficient for catalyzing the single-step conversion of ethanol to butene (1- and 2-butene mixtures) in the presence of H 2 . The reaction proceeds via a cascading sequence of reactions over mixed metal and Lewis sites, with the catalyst composition tuned to selectively favor butene formation. However, the catalyst slowly deactivates when evaluated over long reaction times. Here, we evaluated the lifetime of the Ag–ZrO 2 /SBA-16 catalyst system for ethanol-to-butene conversion at 325 °C for up to 800 hours on stream. Several characterization techniques were used to elucidate the mechanism(s) by which catalyst deactivation occurs. Coke deposition, Ag particle sintering, and Ag 0 -to-Ag + oxidation state change were identified to be the major causes of catalyst deactivation. Coke deposits cover primarily Lewis acid sites which are responsible for aldol condensation, Meerwein-Ponndorf-Verley (MPV) reduction, and dehydration reactions. Ag particle sintering and Ag oxidation state change leads to a reduction in the number of metallic Ag sites responsible for the dehydrogenation/hydrogenation steps. The fresh catalyst likely experiences hydrothermal sintering in the early stage of reaction and permanently loses some active Lewis acid sites before reaching a new structural steady state. The deactivation of Lewis acid sites leads to a decrease in overall ethanol conversion, whereas the deactivation of the metallic Ag sites decreases the butene selectivity. For catalyst regeneration, oxidative calcination (at 500 °C) followed by reduction (at 325 °C) successfully removes all the coke species on the catalyst surface and restores the metallic Ag particles of the 4Ag–4ZrO 2 /SBA-16 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Active and Stable Single Atom Rh 1 /CeO 2 Catalyst for CO Oxidation during Redox Cycling

We report a single atom Rh 1 /CeO 2 catalyst prepared by the high temperature (800 °C) atom trapping (AT) method which is stable under both oxidative and reductive conditions. Infrared spectroscopic and electron microscopy characterization revealed the presence of exclusively ionic Rh species. These ionic Rh species are stable even under reducing conditions (CO at 300 °C) due to the strong interaction between Rh and CeO 2 achieved by the AT method, leading to high and reproducible CO oxidation activity regardless of whether the catalyst is reduced or oxidized. In contrast, ionic Rh species in catalysts synthesized by a conventional impregnation approach (e. g., calcined at 350 °C) can be readily reduced to form Rh nanoclusters/nanoparticles, which are easily oxidized under oxidative conditions, leading to loss of catalytic performance. The single atom Rh 1 /CeO 2 catalysts synthesized by the AT method do not exhibit changes during redox cycling hence are promising catalysts for emission control where redox cycling is encountered, and severe oxidation (fuel cut) leads to loss of performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room-temperature Synthesis of High-entropy Perovskite Oxide Nanoparticle Catalysts via Ultrasonication-based Method

Currently, a sonochemical-based technique for one-pot synthesis of entropy-stabilized perovskite oxide nanoparticle catalysts with high surface area is reported. The high-entropy perovskite oxides were synthesized as monodispersed, spherical nanoparticles with average crystallite size of ~5.9 nm. Taking advantage of the acoustic cavitation phenomenon in ultrasonication process, the nanoparticles of BaSr(ZrHfTi)O 3 , BaSrBi(ZrHfTiFe)O 3 and Ru/BaSrBi(ZrHfTiFe)O 3 were crystallized as single-phase perovskite structures through ultrasonication exposure without calcination. Of utmost importance, the entropically-driven stability of Ru/BaSrBi(ZrHfTiFe)O 3 with excellent dispersion of Ru in the perovskite phase, bestowed the nanoparticles of Ru/BaSrBi(ZrHfTiFe)O 3 with good catalytic activity for CO oxidation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sustainable Graphite and Jet Fuel from Biorefinery Residue

Abstract Battery‐grade graphite and aviation fuel are traditionally produced from non‐renewable, fossil carbon feedstocks and result in substantial greenhouse gas emissions. Biomass holds exciting potential as a renewable and sustainable feedstock for the production of graphite and aviation fuel, but challenges exist including the necessity of a catalyst when producing graphite and low selectivity when producing aviation fuel. A process to convert a biomass‐derived feedstock into graphite without the use of a catalyst and fuels with high selectivity towards sustainable aviation fuel (SAF) is innovated. Heavy bio‐oil undergoes a conversion process similar to the commercial production of synthetic graphite including coking at 500 °C, calcination at 1000 °C, and graphitization at 2800 °C. The resulting biographite exhibits excellent performance in lithium‐ion battery configurations with specific capacity of ~330 mAh g −1 and a 96.8 % capacity rebound after high rate cycling. The liquid hydrocarbon co‐product from coking is suitable for hydrotreating into SAF. The aviation fuel fraction (70 wt % of the fuel produced) meets ASTM standards and is composed primarily of cycloalkanes (~80 wt %) which improves energy density compared to paraffins produced by other SAF pathways and may replace aromatics for elastomer swelling in traditional jet fuel with less soot production.

09 BIOMASS FUELS↗

Efficient Electrocatalytic Synthesis of Ammonia from Water and Air in a Membrane‐Free Cell: Confining the Iron Oxide Catalyst to the Cathode

Ammonia is critical for food and chemical production; however, NH 3 synthesis is one of the largest industrial greenhouse gas producers. We report a path to an exceptionally high rate (2.3 × 10 –9 mol of NH 3 s –1 cm –2 ), CO 2 free NH 3 electrosynthesis from H 2 O and air under ambient electrolysis conditions (60 °C, 1 atm). Iron oxide (dispersed in hydroxide electrolyte) catalyzed NH 3 synthesis is probed at intermediate temperature (20–200 °C) and pressure (1–10 atm) with Monel mesh electrodes. Iron calcination preparation of the iron oxide catalyst is optimized by size, and then physically constrained to the reactive domain of the electrolysis cell cathode through use of mesh electrodes at even lower temperatures, allowing for an ambient, preferred electrosynthesis. These novel constraints enhance NH 3 catalyst utilization at low temperature and open future pathways to the addition of ion‐specific membranes to the high rate NH 3 synthesis cell.

Liu, Xinye↗

Development of High Power Density Metal‐Supported Solid Oxide Fuel Cells

Abstract Symmetric‐structure metal‐supported solid oxide fuel cells (MS‐SOFCs) are fabricated by infiltrating catalysts on both anode and cathode side. Various aspects of the infiltration process are optimized. Performance is found to be sensitive to precursor dilution, catalyst loading, and catalyst calcining temperature. For an optimized cell with lanthanum strontium manganite (LSM) as cathode and Sm 0.2 Ce 0.8 O 2− δ mixed with Ni (SDCN) as anode, peak power densities of 0.44, 1.1, and 1.9 W cm −2 are achieved at 600, 700, and 800 °C, respectively. A fully symmetric MS‐SOFC with SDCN as both the anode and cathode sides achieves moderate peak power densities of 0.12, 0.37, and 0.76 W cm −2 at 600, 700, and 800 °C, respectively. A solvent‐based infiltration technique is also explored and found to be more effective than capillary forces alone but not as effective as vacuum infiltration.

Tucker, Michael C.↗

Surface Modification of Nickel-Rich Cathode Materials by Ionically Conductive Materials at Room Temperature

Nickel-rich cathode materials (LiNi x Mn y Co 1-x-y O 2 , NMC) are promising to push the limits of lithium-ion batteries to higher energy density. This approach is favored in practical applications including electric vehicles and aviation transportation. However, the instability of the NMC at charged state results in safety concerns and poor cycling stability. Surface coating is a practical and effective strategy to address this. Cubic Li7La3Zr2O12 (LLZO) is an ideal coating material regarding the low electron transfer rate and high Li+ conductivity. Thus, a LLZO coating layer can suppress the parasitic reactions in the electrode/electrolyte interface without deteriorating the lithium migration. However, high-temperature calcination seems to inevitably create the chemical couplings between NMC and LLZO, leading to the interdiffusion and degradation of NMC and LLZO crystal structures. This work presents a simple mechanochemical method to effectively coat LLZO on the NMC particle surface. Furthermore, the coated cathode demonstrates superior electrochemical performance compared with the pristine NMC cathode.

25 ENERGY STORAGE↗

The electronic Raman scattering spectrum of PuO 2

Here the Raman spectrum of PuO 2 was measured up to 13,000 cm –1 with three different laser excitation wavelengths spanning the resonance (405 nm), near-resonance (457 nm), and preresonance (514 nm) energy range. Approximately 26 never-before-seen bands were observed between 3500 and 13,000 cm –1 . Given the very high energy of the Raman shifts of these bands and the relative insensitivity of their spectral position to the interrogating laser wavelength, they are believed to arise from an electronic origin. These bands are present in both freshly calcined and radiolytically aged PuO 2 , although a broad luminescence is observed in the aged material, which obscures many of the high frequency features. In situ laser annealing of the material attenuated this luminescence and allowed for clear observation of these never-before-seen spectral features. Discovery of these high-energy bands presents a new way of identifying PuO 2 for nuclear nonproliferation and forensics purposes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Spray-drying as a tool to disperse conductive carbon inside Na 2 FePO 4 F particles by addition of carbon black or carbon nanotubes to the precursor solution

In this work, Na 2 FePO 4 F-carbon composite powders were prepared by spray-drying a solution of inorganic precursors with 10 and 20 wt% added carbon black (CB) or carbon nanotubes (CNTs). In order to compare the effect of CB and CNT when added to the precursor solutions, the structural, electrochemical, and morphological properties of the synthesized Na 2 FePO 4 F-xCB and Na 2 FePO 4 F-xCNT samples were systematically investigated. In both cases, X-ray diffraction shows that calcination at 600 °C in argon leads to the formation of Na 2 FePO 4 F as the major inorganic phase. 57Fe Mössbauer spectroscopy was used as complementary technique to probe the oxidation states, local environment, and identify the composition of the iron-containing phases. The electrochemical performance is markedly better in the case of Na 2 FePO 4 F-CNT (20 wt%), with specific capacities of about 100 mAh/g (Na 2 FePO 4 F-CNT) at C/4 rate vs. 50 mAh/g for Na 2 FePO 4 F-CB (20 wt%). SEM characterization of Na 2 FePO 4 F-CB particles revealed different particle morphologies for the Na 2 FePO 4 F-CNT and Na 2 FePO 4 F-CB powders. The carbon-poor surface observed for Na 2 FePO 4 F-CB could be due to a slow diffusion of carbon in the droplets during drying. On the contrary, Na 2 FePO 4 F-CNT shows a better CNT dispersion inside and at the surface of the NFPF particles that improves the electrochemical performance.

25 ENERGY STORAGE↗

Tuning the Core–Shell Structure of Au 144 @Fe 2 O 3 for Optimal Catalytic Activity for CO Oxidation

Core–shell heterostructures have been utilized as a catalyst that is thermally stable and exhibits a synergistic effect between core and shell, resulting in increased catalytic activity. We report on the synthetic procedure involving a Au 144 core with an iron oxide shell which can be varied in thickness. The Au 144 @Fe 2 O 3 particles with Au:Fe mass ratios of 1:2, 1:4, and 1:6 were synthesized and then deposited onto silica via colloidal deposition. Using CO oxidation, each Au 144 @Fe 2 O 3 /SiO 2 catalyst gave varying degrees of full CO conversion depending on the thickness of the iron oxide layer. The 1:4 Au 144 @Fe 2 O 3 /SiO 2 catalyst produced the best catalytic activity and was further investigated via thermal treatments, where calcination at 300 °C presented the best results, and the 1:4 ratio was still active at 100 °C after thermal treatments.

2-propanol conversion↗