Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary layer flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Boundary layer development as a function of chamber pressure in the NASA Lewis 1030:1 area ratio rocket nozzle

Through the use of theoretical predictions of fluid properties and experimental heat transfer and thrust measurements, the zones of laminar, transitional, and turbulent boundary layer flow were defined for the NASA Lewis 1039:1 area ratio rocket nozzle. Tests were performed on the nozzle at chamber pressures from 350 to 100 psia. For these conditions, the throat diameter Reynolds numbers varied from 300,000 to 1 million. The propellants used were gaseous hydrogen and gaseous oxygen. Thrust measurements and nozzle outer wall temperature measurements were taken during the 3-sec test runs. Comparison of experimental heat transfer and thrust data with the corresponding predictions from the Two-Dimensional Kinetics (TDK) nozzle analysis program indicated laminar flow in the nozzle at a throat diameter Reynolds number of 320,000 or chamber pressure of 360 psia. Comparison of experimental and predicted heat transfer data indicated transitional flow up to and including a chamber pressure of 1000 psia. Predicted values of the axisymmetric acceleration parameter within the convergent and divergent nozzle were consistent with the above results. Based upon an extrapolation of the heat transfer data and predicted distributions of the axisymmetric acceleration parameter, transitional flow was predicted up to a throat diameter Reynolds number of 220,000 or 2600-psia chamber pressure. Above 2600-psia chamber pressure, fully developed turbulent flow was predicted.

Smith, Tamara A.↗
NASA NTRS1987

Aeolian processes aboard a Space Station: Saltation and particle trajectory analysis

The Carousel Wind Tunnel (CWT) proposed to study aeolian processes aboard a Space Station consists of two concentric rotating drums. The space between the two drums comprises the wind tunnel section. Differential rates of rotation of the two drums would provide a wind velocity with respect to either drum surface. Preliminary results of measured velocity profiles made in a CWT prototype indicate that the wall bounded boundary layer profiles are suitable to simuate flat plate turbulent boundary layer flow. The two dimensional flate plate Cartesian coordinate equations of motion of a particle moving through the air are explained. In order to assess the suitability of CWT in the analysis of the trajectories of windblown particles, a series of calculations were conducted comparing cases for gravity with those of zero gravity. Results from the calculations demonstrate that a wind tunnel of the carousel design could be fabricated to operate in a space station environment and that experiments could be conducted which would yield significant results contributing to the understanding of the physics of particle dynamics.

White, Bruce R.↗
NASA NTRS1987

A low-Reynolds-number two-equation turbulence model for predicting heat transfer on turbine blades

A modified form of the Lam-Bremhorst low-Reynolds number kappa-epsilon turbulence model was developed for predicting transitional boundary layer flows under conditions characteristic of gas turbine blades. The application of the model to flows with pressure gradients is described. Tests against a number of turbine blade cascade data sets are included. Some additional refinements of the model that were made in recent months are explained.

Patankar, Suhas V.↗
NASA NTRS1989

Wind-tunnel investigations of wings with serrated sharp trailing edges

Exploratory wind-tunnel force measurements are presented for two wing geometries with small-scale planar and nonplanar serrated trailing-edge devices (chord-Reynolds numbers ranged from 1.0 to 3.7 million). The planar serrated trailing-edge extensions reduced the drag at conditions when trailing-edge separation occurred at low angles of attack. The introduction of serrations reduced or eliminated the drag penalty, due to the small (1-2 percent of the chord length) nonplanar trailing-edge flaps, while maintaining the effects of increase in camber. The presence of streamwise vortices immediately downstream of the serrated trailing edges is believed to have favorably affected the boundary-layer flow approaching the trailing edge and the near-wake development, resulting in reduced pressure (form) drag.

Vijgen, P. M. H. W.↗
NASA NTRS1989

Upwind algorithm for the parabolized Navier-Stokes equations

A new upwind algorithm based on Roe's scheme has been developed to solve the two-dimensional parabolized Navier-Stokes equations. This method does not require the addition of user-specified smoothing terms for the capture of discontinuities such as shock waves. Thus, the method is easy to use and can be applied without modification to a wide variety of supersonic flowfields. The advantages and disadvantages of this adaptation are discussed in relation to those of the conventional Beam-Warming (1978) scheme in terms of accuracy, stability, computer time and storage requirements, and programming effort. The new algorithm has been validated by applying it to three laminar test cases, including flat-plate boundary-layer flow, hypersonic flow past a 15-deg compression corner, and hypersonic flow into a converging inlet. The computed results compare well with experiment and show a dramatic improvement in the resolution of flowfield details when compared with results obtained using the conventional Beam-Warming algorithm.

Lawrence, Scott L.↗
NASA NTRS1990

Preventing Ventilation On Sailboard Skegs

Design effort undertaken to solve spinout problem plaguing high-performance sailboards. Proposed skeg section designed by use of computer model of pressure field and boundary layer. Prevents ventilation by maintaining attached boundary-layer flow throughout operating environment. Cavitation also avoided by preventing valleys in pressure distribution while skeg operated throughout its range.

Caldwell, Richard A.↗
NASA NTRS1990

Heat transfer measurements from a NACA 0012 airfoil in flight and in the NASA Lewis icing research tunnel

Local heat transfer coefficients from a smooth and roughened NACA 0012 airfoil were measured using a steady state heat flux method. Heat transfer measurements on the specially constructed 0.533 meter chord airfoil were made both in flight on the NASA Lewis Twin Otter Research Aircraft and in the NASA Lewis Icing Research Tunnel (IRT). Roughness was obtained by the attachment of small, 2 mm diameter, hemispheres of uniform size to the airfoil surface in four distinct patterns. The flight data was taken for the smooth and roughened airfoil at various Reynolds numbers based on chord in the range of 1.24x10(exp 6) to 2.50x10(exp 6) and at various angles of attack up to 4 degrees. During these flight tests the free stream velocity turbulence intensity was found to be very low (less than 0.1 percent). The wind tunnel data was taken in the Reynolds number range of 1.20x10(exp 6) to 4.52x10(exp 6) and at angles of attack from -4 degrees to +8 degrees. The turbulence intensity in the IRT was 0.5 to 0.7 percent with the cloud making spray off. Results for both the flight and tunnel tests are presented as Frossling number based on chord versus position on the airfoil surface for various roughnesses and angle of attack. A table of power law curve fits of Nusselt number as a function of Reynolds number is also provided. The higher level of turbulence in the IRT versus flight had little effect on heat transfer for the lower Reynolds numbers but caused a moderate increase in heat transfer at the higher Reynolds numbers. Turning on the cloud making spray air in the IRT did not alter the heat transfer. Roughness generally increased the heat transfer by locally disturbing the boundary layer flow. Finally, the present data was not only compared with previous airfoil data where applicable, but also with leading edge cylinder and flat plate heat transfer values which are often used to estimate airfoil heat transfer in computer codes.

Poinsatte, Philip E.↗
NASA NTRS1990

Unsteady three-dimensional marginal separation, including breakdown

A situation involving a three-dimensional marginal separation is considered, where a (steady) boundary layer flow is on the verge of separating at a point (located along a line of symmetry/centerline). At this point, a triple-deck is included, thereby permitting a small amount of interaction to occur. Unsteadiness is included within this interaction region through some external means. It is shown that the problem reduces to the solution of a nonlinear, unsteady, partial-integro system, which is solved numerically by means of time-marching together with a pseudo-spectral method spatially. A number of solutions to this system are presented which strongly suggest a breakdown of this system may occur, at a finite spatial position, at a finite time. The structure and details of this breakdown are then described.

Duck, Peter W.↗
NASA NTRS1990

On the instability of Goertler vortices to nonlinear travelling waves

Recent theoretical work by Hall and Seddougui (1989) has shown that strongly nonlinear, high wavenumber Goertler vortices developing within a boundary layer flow are susceptible to a secondary instability which takes the form of travelling waves confined to a thin region centered at the outer edge of the vortex. The case is considered in which the secondary mode could be satisfactorily described by a linear stability theory and herein the objective is to extend this investigation of Hall and Seddougui (1989) into the nonlinear regime. It was found that at this stage not only does the secondary mode become nonlinear but it also interacts with itself so as to modify the governing equations for the primary Goertler vortex. In this case then, the vortex and the travelling wave drive each other and, indeed, the whole flow structure is described by an infinite set of coupled, nonlinear differential equations. A Stuart-Watson type of weakly nonlinear analysis of these equations is undertaken and concluded, in particular, that on this basis there exist stable flow configurations in which the travelling mode is of finite amplitude. Implications of the findings for practical situations are discussed and it is shown that the theoretical conclusions drawn here are in good qualitative agreement with available experimental observations.

Seddougui, Sharon O.↗
NASA NTRS1989

Correlation of optical phase distortion with turbulent structure in a homogeneous shear flow

The relative importance of small-scale and large-scale turbulent structure to phase distortion in propagation through the homogeneous shear flow is the focus of this study. The importance of large-scale vortical structure and the associated scalar distribution to optical distortion induced by propagation through a turbulent shear flow has been established (Truman and Lee 1989). Phase errors induced in a coherent optical beam by these turbulent fluctuations are computed. This scalar field shows elongated regions of intense fluctuations which have an inclination with respect to the mean flow similar to that of the characteristic hairpin eddies. Long-term plans include an examination of the effects of inhomogeneity through consideration of direct numerical simulations of the channel flow, boundary layer or mixing layer.

Truman, C. Randall↗
NASA NTRS1989

Wind-tunnel investigations of wings with serrated sharp trailing edges

Exploratory wind-tunnel force measurements are presented for two wing geometries with small-scale planar and nonplanar serrated trailing-edge devices (chord-Reynolds numbers ranged from 1.0 - 3.7 x 10 to the 6th). The planar serrated trailing-edge extensions reduced the drag at conditions when trailing-edge separation occurred at low angles of attack. The introduction of serrations reduced or eliminated the drag penalty due to the small (1-2 percent of the chord length) nonplanar trailing-edge flaps, while maintaining the effects of increase in camber. The presence of streamwise vortices immediately downstream of the serrated trailing edges is believed to have favorably affected the boundary-layer flow approaching the trailing edge and the near-wake development, resulting in reduced pressure drag.

Vijgen, P. M. H. W.↗
NASA NTRS1989

Thermal characteristics of mountain desert terrain derived from thermal infrared multispectral scanner measurements

The spatial and temporal variability of mountain-desert territory thermal is examined with an airborne thermal infrared multispectral scanner (TIMS). The purpose of the study is to demonstrate that inhomogeneities of the surface temperatures in the area can be adequately large to influence mesoscale circulations and the turbulence characteristics of boundary-layer flow. Ground truth measurements are compared to the TIMS imagery, with focus placed on the thermal infrared sensitivity to wet and dry soils, terrain elevation, and soil type. The results indicate that variations in the thermal features are dependent on soil type and soil moisture, and that the dependence on surface radiative temperatures on terrain elevation is apparent in daytime measurements.

Astling, E. G.↗
NASA NTRS1991

On the nonlinear stability of a high-speed, axisymmetric boundary layer

The stability of a high-speed, axisymmetric boundary layer is investigated using secondary instability theory and direct numerical simulation. Parametric studies based on the temporal secondary instability theory identify subharmonic secondary instability as a likely path to transition on a cylinder at Mach 4.5. The theoretical predictions are validated by direct numerical simulation at temporally-evolving primary and secondary disturbances in an axisymmetric boundary-layer flow. At small amplitudes of the secondary disturbance, predicted growth rates agree to several significant digits with values obtained from the spectrally-accurate solution of the compressible Navier-Stokes equations. Qualitative agreement persists to large amplitudes of the secondary disturbance. Moderate transverse curvature is shown to significantly affect the growth rate of axisymmetric second mode disturbances, the likely candidates of primary instability. The influence of curvature on secondary instability is largely indirect but most probably significant, through modulation of the primary disturbance amplitude. Subharmonic secondary instability is shown to be predominantly inviscid in nature, and to account for spikes in the Reynolds stress components at or near the critical layer.

Pruett, C. David↗
NASA NTRS1991

Aerothermal study in an axial compression corner with shock impingement at Mach 6

An experimental study of an axial-compression interior-corner region with shock impingement was conducted in the NASA Langley 20-inch Mach 6 Tunnel to obtain aerodynamic heating rate distributions. The model, a generic hypersonic engine inlet, had a sharp leading edge forebody, cowl, and interchangeable struts with sharp and blunt leading edges. Experiments were conducted at free-stream unit Reynolds numbers of 1.68 x 10 to the 6th and 3.35 x 10 to the 6th per foot for the blunt and sharp-strut configurations, respectively. For the sharp-strut configuration, with and without trips, the peak heating occurred on the cowl, near the compression corner, downstream of the forebody oblique shock impingement region. The peak heating levels, for both the tripped and untripped boundary-layer flows were about 45 and 50 times the reference laminar heating levels, respectively. The peak heating for the blunt leading edge strut model, which was 30 times the reference value, occurred on the cowl, away from the corner, where the bow shock from the strut leading edge intersected the cowl surface.

Venkateswaran, S.↗
NASA NTRS1990

A study of turbulence models for prediction of transitional boundary layers

Calculations of two-dimensional transitional boundary layer flows in zero and favorable pressure gradients are presented. The major focus is on the evaluation of current turbulence models to predict quantities such as skin-friction and heat transfer coefficients. Three turbulence models using the mixing length concept along with a one-equation model are considered. These models are tested by comparison with the experiments of Blair and Werle, who investigated flows over a heated flat plate for various levels of free-stream turbulence.

Abid, Ridha↗
NASA NTRS1991

A numerical investigation of supersonic nozzle boundary layer transition

The boundary layer stability within the high-area-ratio nozzle at NASA Lewis was tested at five chamber pressure conditions. For all nozzle conditions examined, Taylor-Goertler vortices grew more rapidly than Tollmien-Schlichting waves. The experimental heat flux was accurately predicted by a laminar boundary layer computation, thereby confirming the laminar nature of the nozzle boundary layer flow. When the chamber pressure was increased in a series of cases, the transition point occurred farther upstream. The number of vortices contained in the dominant instability increased with chamber pressure.

Pauley, Laura L.↗
NASA NTRS1992

Three-Dimensional Turbulent Boundary Layer With Adverse Pressure Gradient

Report describes experiment to measure effects of adverse pressure gradient on three-dimensional turbulent boundary-layer flow; effect of streamwise gradient of pressure on crossflow of particular interest. Production of turbulent kinetic energy grows rapidly in vicinity of step as result of steep mean-flow velocity gradients. Dissipation grows less quickly than production; leading to net growth with distance along streamline.

Driver, David M.↗
NASA NTRS1991

Turbulence modeling

The performance of existing two-equation eddy viscosity models was examined. An effort was made to develop better models for near-wall turbulence using direct numerical simulations of plane channel and boundary layer flows. The asymptotic near-wall behavior of turbulence was used to examine the problems of current second order closure models and develop new models with the correct near-wall behavior. Rapid Distortion Theory was used to analytically study the effects of mean deformation on turbulence, obtain analytical solutions for the spectrum tensor, Reynolds stress tensor, anisotropy tensor and its invariants, which can be used in the turbulence model development. The potential of the renormalization group theory in turbulence modeling was studied, as well as compressible turbulent flows, and modeling of bypass transition.

Shih, Tsan-Hsing↗