Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Batch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Polymeric Microcapsules as Robust Mimics of Emulsion Liquid Membranes for Selective Ion Separations

Selective ion separations are increasingly needed to combat water scarcity, recover resources from wastewater, and enable the efficient recycling of electronics waste. Emulsion liquid membranes (ELMs) have received interest due to rapid kinetics, high selectivities, and low solvent requirements but are too unstable for industrial usage. Here, we demonstrate that polymeric microcapsules can serve as robust, solvent-free mimics of ELMs. As a proof of concept, we incorporated the copper-selective ligand Lix 84-I in the walls of microcapsules formed from a commercial polystyrene-b-polybutadiene-b-polystyrene triblock polymer. The microcapsules were formed from a double-emulsion template, resulting in particles typically 20–120 μm in diameter that encapsulated even smaller droplets of a dilute (≤0.5 M) H 2 SO 4 solution. Batch experiments demonstrated facilitated-transport behavior, with equilibrium reached in as little as 10 min for microcapsules with 1% ligand, and with ~15-fold selectivity for Cu 2+ over Ni 2+ . Furthermore, the microcapsules could be packed readily in columns for flow-through operation, thus enabling near-complete Cu 2+ removal in ~2 min under certain conditions, recovery of Cu 2+ by flowing through fresh dilute H 2 SO 4 , and reuse for at least 10 cycles. The approach in this work can serve as a template for using selective ligands to enable robust and simple flow-through processes for a variety of selective ion separations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Thermochemical Transformation of Calcium during Biomass Burning and the Effects on Postfire Aqueous Dissolution of Macronutrients

Calcium is commonly the most abundant element in fire residues and its speciation largely determines the geochemical properties of fire residues and their effects on postfire soil chemistry. To explore the effects of biomass composition and fire conditions on ash Ca speciation, this study characterizes the speciation of Ca in charcoal and ash samples that were derived from different plant compartments and thermal conditions, using Ca K-edge X-ray absorption near edge spectroscopy. Results showed that biomass contains abundant organic Ca complexes, which were mineralized into fairchildite and calcite after heating at 450 to 600 °C and then CaO, as temperature increased to 750 °C. Apatite could be an abundant Ca species in fire residues if the Ca/P molar ratio of the biomass is small (<2). The mineralization of organic Ca to the identified Ca minerals during burning was negligibly affected by the oxygen level. Calcium speciation in prescribed fire residues resembled that of biomass ash burned at 550 °C with similar Ca/P molar ratios. Batch experiments showed that macronutrients (Ca, Mg, K, and P) were differentially released, as a result of different solubility of minerals in ashes and reprecipitation of minerals. The aqueous solubility of Ca, Mg, and P decreased as pH increased from 5 to 9, while K showed no pH dependency and was almost completely soluble. Results from this study improve our understanding of the chemistry of fire residues and their geochemical behaviors, which can help evaluate the impact of fire on postfire soil properties and macronutrient cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Speciation and Aqueous Dissolution of Macronutrients in Fire Ash: Variation across Ecosystems and the Effects on Nutrient Cycling

This study investigated the speciation and aqueous dissolution of macronutrients in fire ash from diverse ecosystems and speciation of ash and smoke from laboratory burning, exploring the variations and their causes. The speciation of phosphorus (P), calcium (Ca), and potassium (K) in fire ash from five globally distributed ecosystems was characterized by using X-ray absorption spectroscopy and sequential fractionation. Aqueous dissolution of the macronutrients was measured by batch experiments at acidic and alkaline pHs. The results showed that P existed mainly as Ca phosphates, Ca as double carbonates, calcite, and sulfates, and most K was associated with Ca carbonates. Mineralogy and the relative abundance of the species were primarily controlled by elemental stoichiometry and fire temperature. Differences in Ca and P speciation existed between ash and smoke from laboratory burning, possibly caused by the temperature difference and/or mass fractionation during burning. The rates, extents, and pH dependencies of macronutrient dissolution differed among macronutrients and depended on their speciation, with K being highly soluble and the P and Ca regulated by solution pH. The variability in ash macronutrient chemistry and ecosystemspecific fire ash loads resulted in varying loads and availability of individual macronutrient from fire among ecosystems. This study provides a mechanistic understanding of how fires transform the chemistry of macronutrients and affect macronutrient returns to soils across different ecosystems, which is essential for evaluating the disturbance to ecosystem nutrient cycling by fires.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Impact of natural organic matter on plutonium vadose zone migration from an NH4Pu(V)O2CO3(s) source

Large amounts of plutonium produced at the Savannah River Site (SRS) in the latter half of the last century led to the release of plutonium to the subsurface. Low-level waste containing plutonium has also been disposed of in the SRS vadose zone. The mobility and risk posed by these plutonium sources is not well understood, in part, because of unknown interactions of the various mobile plutonium species with natural organic matter (NOM). This study investigated the influence of NOM on the behavior of plutonium(V) in the vadose zone through a combination of field lysimeter and laboratory studies. Well-defined solid sources of NH4PuVO2CO3(s) placed in 5-L lysimeters containing vadose zone soils NOM-amended or unamended were exposed to natural SRS meteorological conditions for three years. These lysimeters were removed from the field and analyzed using wet chemistry methods and X-ray absorption spectroscopy (XAS). Plutonium desorption from soils recovered from the lysimeters and laboratory batch sorption experiments using Pu-free soils both indicated that surface mediated reduction of Pu(V) to Pu(IV) was influencing Pu sorption behavior. For both lysimeters (amended and unamended with NOM), Pu migrated slowly through the lysimeter core, with > 95% of the Pu remaining within 2 cm of the source. However, without the NOM amendments, Pu was transported significantly farther than in the presence of NOM. Thus, the presence of NOM appeared to decrease the mobility. Working hypotheses to explain this behavior are that 1) formation of ternary surface-NOM-Pu complexes enhanced Pu sorption affinity causing less mobility and/or 2) formation of these ternary surface-NOM-Pu complexes prevented reoxidaiton of Pu(IV) to more mobile Pu(V) in the pore water.

plutonium, organic matter↗
DOE OSTI2020

Scaling Trivalent Actinide and Lanthanide Recovery by Diglycolamide Resin from Savannah River Site’s Mark-18A Targets

The Savannah River National Laboratory is implementing a separation flowsheet to recover rare isotopes and transplutonium elements from irradiated 242 Pu targets known as Mark-18A targets. The Mark-18A targets contain the United States’ supply of nonseparated 244 Pu, which has a wide range of applications from nuclear forensics to production of superheavy elements such as flerovium. The targets also contain hundreds of grams of heavy curium ( 246–248 Cm), which is used as a target material for 252 Cf production. This work investigates the use of diglycolomide resin (DGA Resin) to recover valuable trivalent actinides from the Mark-18A targets. Batch contact experiments were performed on a representative simulant to determine mass loadings. Furthermore, the resin showed an overall capacity of 11 mg/mL for a mixed metal matrix (Zr and La–Gd). Column experiments showed chromatographic separation with transition-metal breakthroughs occurring first followed by the lanthanide series La–Gd. The experiments showed that lanthanide breakthrough occurred after 11 mg/mL mass loading was reached on the column with the mixed metal matrix. A radiological column experiment with an in-line UV/vis cell was able to detect Nd breakthrough just prior to 241 Am breakthrough. Implementing an in-line UV/vis cell into full-scale Mark-18A target processing will be used to limit breakthrough of trivalent actinides recovered from the targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Na Concentration on Cs Distribution with Crystalline Silicotitanate in Tank Waste Simulants

Crystalline silicotitanate (CST) ion exchange media is currently utilized in the tank side cesium removal (TSCR) system on the Hanford site to remove Cs-137 from the tank waste supernate. As the main dose contributor to the liquid supernate in Hanford tank waste, it is necessary to remove the Cs-137 to expedite low activity waste processing and immobilization. Ongoing batch contact experiments with CST have been done to tease out the impact of group II metals, anions, potassium, and temperature on Cs removal to better understand bounding conditions for operations as well as aid in development of a wholesome isotherm model to predict Cs behavior in the tank waste. This paper discusses the impact of Na concentration on Cs exchange and provides insight into the challenges associated with activity coefficient estimations for modeling Cs distribution in tank waste matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A multifunctional technology platform for sorbent construction using polyacrylonitrile scaffolds

Polyacrylonitrile (PAN) is a synthetic polymer that shows high potential for use in a wide range of environmental remediation applications. PAN can be implemented in various ways within a batch or continuous process stream for use as a passive scaffold holding active gettering materials in place or where the PAN scaffold (e.g., beads, fiber mats, membranes) is functionalized with active chelating groups (e.g., amine, hydrazide, amidoximes, carboxyl). Application spaces covered in this review include remediation of heavy metals (e.g., Ag, As, Cd, Cr6+, Cu, Pb, Sb, and Se), high-dose fission products (e.g., 90Sr, 137Cs), radioiodine (i.e., 129I), noble gases (i.e., Xe, 85Kr), rare earths (e.g., Ce, Y), and actinides (e.g., Am, Pu, U). Methods for producing PAN composite sorbents are discussed. Options are also discussed for removing the PAN matrix following chemisorption of an active contaminant to minimize waste volumes requiring disposal.

polyacrylonitrile, composite sorbents, sulfides, a↗
DOE OSTI2024

Kinetics and Mechanism of Ce(IV) Phase Transfer by the Neutral Extractants Tributyl Phosphate and N,N -Di(2-ethylhexyl)isobutyramide

Tributyl phosphate and N,N-di(2-ethylhexyl)isobutyramide (DEHiBA) are uranium-selective extractants that could be used to recover low-enriched uranium from commercial used nuclear fuel. The economic viability of liquid-liquid extraction processes for chemical separations depends on both thermodynamic and kinetic considerations. Here we used microfluidic droplet extraction to measure interfacial phase transfer rate constants for the extraction and stripping of Ce(IV), a non-radioactive actinide surrogate. The Damkohler numbers for each system were calculated and the phase transfer processes were determined to be diffusion-limited under all conditions, contrary to prior studies using constant interface stirred cells and single drop methods. A well-extracted 2:1 DEHiBA/Ce(IV) complex in the organic phase was determined from batch distribution studies, suggesting a different extraction mechanism for Ce(IV) compared with poorly extracted Pu(IV). Finally, phase disengagement rates were found to be rapid in both systems, in agreement with other studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Liquid Sorption-Enhanced Haber–Bosch Process

The use of a liquid sorbent in a traditional Haber-Bosch process enables significant improvements in energy efficiency and potential cost savings for arguably the most important chemical process on the planet. The approach presented in this report employs an incompressible liquid sorbent that absorbs and releases ammonia (NH 3 ) under specific conditions. To achieve this, we investigate reactions of ammonia and pure phosphoric acid (H 3 PO 4 , PA), which rapidly neutralize to form an equilibrated solution of monoammonium phosphate (MAP) and diammonium phosphate (DAP) that functions as a reversible and regenerable sorbent. Through intimate contact of the gas-phase Haber-Bosch reaction mixture with this liquid absorbent, complete equilibrium uptake may be achieved in an appropriately sized separator, and facile separation occurs through the use of independent liquid and gas phases. Following depressurization and release of the ammonia product, only the incompressible fluid needs to be repressurized and returned to the reactor. This study documents proof-of-concept absorption and desorption experiments carried out in 75 mL batch reactors, predominantly charged with precise MAP and DAP mixtures that equilibrate at process-relevant temperatures and pressures. We then assemble the first thermodynamic relationships that underlie this advantaged separation strategy, validated by reactive force field (ReaxFF) interatomic potential simulations, and benchmarked with traditional separation routes via process modeling and technoeconomic analysis. The scale of energy consumption in the century-old Haber-Bosch process is massive, and the elegant liquid sorption approach reported here offers opportunities to enhance its energy efficiency for the next frontier of ammonia synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sample Dependence of Magnetism in the Next-Generation Cathode Material LiNi 0.8 Mn 0.1 Co 0.1 O 2

We present a structural and magnetic study of two batches of polycrystalline LiNi 0.8 Mn 0.1 Co 0.1 O 2 (commonly known as Li NMC 811), a Ni-rich Li ion battery cathode material, using elemental analysis, X-ray and neutron diffraction, magnetometry, and polarized neutron scattering measurements. We find that the samples, labeled S1 and S2, have the composition Li 1–x Ni 0.9+x–y Mn y Co 0.1 O 2 , with x = 0.025(2), y = 0.120(2) for S1 and x = 0.002(2), y = 0.094(2) for S2, corresponding to different concentrations of magnetic ions and excess Ni 2+ in the Li + layers. Both samples show a peak in the zero-field-cooled (ZFC) dc susceptibility at 8.0(2) K, but the temperature at which the ZFC and FC (field-cooled) curves deviate is substantially different: 64(2) K for S1 and 122(2) K for S2. The ac susceptibility measurements show that the transition for S1 shifts with frequency whereas no such shift is observed for S2 within the resolution of our measurements. Our results demonstrate the sample dependence of magnetic properties in Li NMC 811, consistent with previous reports on the parent material LiNiO 2 . Here, we further establish that a combination of experimental techniques is necessary to accurately determine the chemical composition of next-generation battery materials with multiple cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unsaturated Sulfur Crown Ethers Can Extract Mercury(II) and Show Promise for Future Copernicium(II) Studies: A Combined Experimental and Computational Study

The unsaturated hexathia-18-crown-6 (UHT18C6) molecule was investigated for the extraction of Hg(II) in HCl and HNO3 media. This extractant can be directly compared to the recently studied saturated hexathia-18-crown-6 (HT18C6). The default conformation of the S lone pairs in UHT18C6 is endodentate, where the pocket of the charge density, according to the crystal structures, is oriented toward the center of the ring, which should allow better extraction for Hg(II) compared to the exodentate HT18C6. Batch study experiments showed that Hg(II) had better extraction at low acid molarity (ca. 99% in HCl and ca. 95% in HNO 3 ), while almost no extraction was observed above 0.4 M HCl and 4 M HNO 3 (<5%). Speciation studies were conducted with the goal of delineating a plausible extraction mechanism. Density functional theory calculations including relativistic effects were carried out on both Hg(II)-encapsulated HT18C6 and UHT18C6 complexes to shed light on the binding strength and the nature of bonding. Our calculations offer insights into the extraction mechanism. In addition to Hg(II), calculations were performed on the hypothetical divalent Cn(II) ion, and showed that HT18C6 and UHT18C6 could extract Cn(II). Finally, the extraction kinetics were explored to assess whether this crown can extract the short-lived Cn(II) species in a future online experiment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Round Robin Measurements of Molten Salt Properties for LiF-NaF-KF (FLiNaK) and NaCl-KCl Mixtures

The development, operation, and regulation of nuclear reactors that utilize molten salts as fuel or as heat transfer media require knowledge of the thermal properties of the salt systems and quantification of the corresponding uncertainties. Knowledge of molten salt properties is also necessary for applications in material synthesis, processing, separations, solar thermal power generation, and energy storage. A round robin was conducted with national laboratory and university participants from twenty-one laboratories in five countries to compare property measurements, to better understand uncertainties, and to identify possible best practices. Two salt mixtures, each from a common batch, were distributed to participants for evaluation: equimolar NaCl-KCl and 45.0LiF-13.7NaF-41.3KF mol % (FLiNaK). Measurements were performed to determine the major constituent composition, oxygen content, density, thermal expansivity, melting point, and thermal conductivity. Error analysis was performed on each measurement for uncertainty quantification for each type of property that was explored. Finally, the resulting discussion of the methodologies used in this work is meant to lay the groundwork for the development of standard methods and reference materials for future high-temperature property measurements on halide melts.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Zero-Field NMR and Millitesla-SLIC Spectra for >200 Molecules from Density Functional Theory and Spin Dynamics

NMR is usually performed at magnetic fields of 1 T and above to obtain sufficient sensitivity and spectral dispersion to identify chemicals based on chemical shifts and J couplings. At lower fields, the advent of hyperpolarization technologies and sensitive detectors can address sensitivity concerns. However, it remains disputed whether spectral signatures at zero and ultra-low fields are sufficient for chemical identification. Here, we report an all–electron DFT-based batch calculation of J-coupling constants, which are used to generate J coupling NMR spectra at zero field and 6.5 mT for over 200 small molecules. In the developed computational tool chain, we first used the all-electron FHI-aims code to calculate the molecular J couplings and chemical shifts. We then fed the calculated NMR parameters into the NMR simulation package SPINACH to simulate both heteronuclear J coupling spectra at zero-field, and homonuclear J coupling spectra as spin-lock induced crossing (SLIC) spectra at ultra-low field (6.5 mT). The resulting spectra demonstrate that zero and ultra-low field NMR spectra can represent unique identifiers of chemical structure for small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Re-Examination of the N 2 O + O Reaction

The reaction of N 2 O with O is a key step in consumption of nitrous oxide in thermal processes. It has two product channels, NO + NO (R2) and N 2 + O 2 (R3). The rate constant for R2 has been measured both in the forward and the reverse direction at elevated temperature and is well established. However, the rate constant for the N 2 + O 2 channel (R3) has been difficult to quantify and has significant error limits. Here, the direct reaction on the triplet surface has a barrier of around 40 kcal mol –1 , and it is too slow for the N 2 + O 2 channel to have any practical significance. Recently, Pham and Lin (2022) suggested an alternative low activation energy reaction path that involves intersystem crossing and reaction on the singlet surface. In the present work, we re-examined a wide range of experiments relevant for the N 2 O + O reaction through kinetic modeling, paying attention to the impact of artifacts such as impurities and surface reactions. Experimental results from shock tubes and batch reactors on the final NO yield in N 2 O decomposition, covering temperatures of 973–2200 K and pressures of 0.013–11.5 atm, support k 3 ~ 0, consistent with the high activation energy for reaction on the triplet surface and a low probability of ISC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Implementation of McMurchie–Davidson Algorithm for Gaussian AO Integrals Suited for SIMD Processors

We report an implementation of the McMurchie− Davidson evaluation scheme for 1- and 2-particle Gaussian AO integrals designed for processors with Single Instruction Multiple Data (SIMD) instruction sets. Like in our recent MD implementation for graphical processing units (GPUs) [Asadchev, A.; Valeev, E. F.. J. Chem. Phys. 2024, 160, 244109.], variable-sized batches of shellsets of integrals are evaluated at a time. By optimizing for the floating point instruction throughput rather than minimizing the number of operations, this approach achieves up to 50% of the theoretical hardware peak FP64 performance for many common SIMD-equipped platforms (AVX2, AVX512, NEON), which translates to speedups of up to 30 over the state-of-the-art one-shellset-at-a-time implementation of Obara−Saika-type schemes in Libint for a variety of primitive and contracted integrals. As with our previous work, we rely on the standard C++ programming language such as the std::simd standard library feature to be included in the 2026 ISO C++ standard without any explicit code generation to keep the code base small and portable. The implementation is part of the open source LibintX library freely available at https://github.com/ValeevGroup/libintx.

Basis sets↗
DOE OSTI2021

Stabilizing NMC 811 Li-Ion Battery Cathode through a Rapid Coprecipitation Process

Improving the capacity of LiNi x Mn y Co 1-x-y O 2 (NMC) by increasing the Ni content results in materials with poor cycling performance and reduced thermal stability. These problems can be alleviated by creating concentration gradients in the materials, but this requires more expensive batch processing. Herein, a simple process is described that can create a coating that penetrates into the precursor particles, creating unique gradients in the precursor material. The coated material demonstrates improved cycling performance and thermal stability as compared to uncoated materials. Additionally, rapid heating to simulate a thermal runaway event while observing these materials with X-rays gives a deeper understanding of how the coating affects the decomposition process.

25 ENERGY STORAGE↗
DOE OSTI2021

Scalable Synthesis of Pt/SrTiO 3 Hydrogenolysis Catalysts in Pursuit of Manufacturing-Relevant Waste Plastic Solutions

Here, an improved hydrothermal synthesis for shape-controlled, size-controlled 60 nm SrTiO 3 nanocuboid (STO NC) supports, which facilitates the scalable creation of platinum nanoparticles catalyst supported on STO (Pt/STO) for the chemical conversion of waste polyolefins, is reported herein. This synthetic method: 1) produces STO NC supports with average sizes ranging from 25 – 80 nm with narrow size distributions 2) demonstrates how SrCO 3 formation and variation in solution pH prevent the formation of STO NCs, and 3) establishes that STO nucleation prior to the hydrothermal treatment favors nanocuboid formation. The updated hydrothermal synthesis was scaled-up and conducted in a 4L batch reactor, resulting in STO NCs of comparable size and morphology (m = 22.5 g, d avg = 58.6 ± 16.2 nm) to those synthesized under standard hydrothermal conditions in a lab-scale 125 mL autoclave reactor. Size-controlled STO NCs, ranging in roughly 10 nm increments from the 25 nm to 80 nm, were used to support Pt deposited through strong electrostatic adsorption (SEA), a practical and scalable solution-based method. Using SEA techniques and a STO support with an average size of 39.3 ± 6.3 nm, a Pt/STO catalyst with 3.6 wt% Pt was produced and used for high-density polyethylene hydrogenolysis under previously-reported conditions (170 psi H 2 , 300°C, 96h; final product: M w = 2400, Ð = 1.03). As a well-established model system for studying the behavior of heterogeneous catalysts and their supports in reactions, the Pt/STO system detailed in this work presents a unique opportunity to simultaneously convert waste plastic into commercially-viable products while gaining fundamental insight into the mechanism of polyethylene hydrogenolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗