Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aggregates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Clays and other minerals in prebiotic processes

Clays and other minerals have been investigated in context with prebiotic processes, mainly in polymerization of amino acids. It was found that peptides adsorbed on the clay, prior to polymerization, influence the reaction. The ratio between the amount of the peptides adsorbed and that of the clay is important for the yield as well as for the degrees of polymerization obtained. Adsorption prior to reaction produces a certain order in the aggregates of the clay particles which might induce better reaction results. Excess of added peptides disturbs this order and causes lesser degrees of polymerization. In addition to adsorption, clays are also able to occlude between their layers substances out of the environment, up to very high concentrations.

Paecht-Horowitz, M.↗

The NASA data systems standardization program - Rationale and scope

A simple, top level logical reference model of the NASA Space Transportation System's end-to-end data system is being developed which can identify the functions and services of the system. Each function or service may be mapped into specific physical subsystems, so that interface relationships are evident and 'standard' protocols may be identified for development. By means of this interface standardization, subsystems can be designed not only independently and in parallel, but with confidence that when the subsystems are aggregated, the end-to-end system will operate efficiently and at low cost. This standardization effort has thus far been principally directed toward space-to-ground communications links.

Smylie, R. E.↗

Laboratory dust experiments - Tracing the composition of cometary dust

The structure and composition of the comet nucleus are investigated theoretically on the basis of aggregation models and laboratory simulations of interstellar-grain evolution. The results are presented in graphs, diagrams, and drawings and discussed in detail. The nucleus is described as a loose tangle of rodlike grains containing about 28 percent H2O, 10 percent CO2 and CO, and 33 percent nonvolatile submicron-size grit particles (silicates, complex organics, and carbon). Evidence from meteorites suggests that the C-12/C-13 ratio of the volatile components is greater than 100.

Greenberg, J. M.↗

Fluidized-Bed Particles Scavenge Silicon Fines

Waste reduced, and silicon production rate improved. In new process silicon formed by thermal decomposition of SiH4. Part of silicon formed on silicon seed particles as result of surface chemical reaction. However, silicon formed by homogeneous reaction in gas phase tends to form aggregates of silicon atoms, which appear as fine particles (like dust). Believed that scavenging action of seed particles enables large fraction fines to be incorporated onto seed surface. This mode of growth confirmed by electron microscopy photographs.

Hsu, G. C.↗

Major element chemical compositions of chondrules in unequilibrated chondrites

The chemical compositions (except for metals and sulfides in chondrules) of more than 500 chondrules from unequilibrated E, H, L, LL, and C chondrites were measured using a broad beam of an electron-probe microanalyzer. The compositions of chondrules can be represented by various mixtures of normative compositions of olivine, low-Ca pyroxene, plagioclase, and high-Ca pyroxene with minor amounts of spinel, feldspathoid, SiO2-minerals, etc., indicating that the chondrule precursor materials consisted of aggregates of these minerals. The Al, Na, and K contents of most chondrules reflect the compositions of the ternary feldspar (An-Ab-Kf) of the chondrule precursor materials, and chemical types of chondrules (KF, SP, IP, and CP) are defined on the basis of the atomic proportion of Al, Na, and K.

Ikeda, Y.↗

Meteoritic constraints on processes in the solar nebula

High-temperature events or processes in the solar nebula were required to form the chondrules and CAI's that make up the bulk of the substance of most chondrites. There is no consensus in the meteoritical community as to the nature of these high-temperature events or processes. In spite of this major area of uncertainty several conclusions can be reached about properties of the nebula. The chondrules and CAI's were formed in regions where the dust/gas ratio was orders of magnitude above the cosmic value. After these high-temperature objects were formed, they began to accrete very promptly (a time scale of hours, probably). Formation and aggregation of the chondrite components happened at the same radial distance in the nebula where chondrites reside today (the asteroid belt). The ambient temperature of the nebula at that time and place was relatively low ( 700 K), and was not responsible for the thermal processing of the chondrules and CAI's.

Wood, J. A.↗

Investigation of SIR-B images for lithologic mapping

It is immediately apparent from the examination of almost any synthetic aperture radar (SAR) data that the radar return is primarily a function of the topographic relief. Yet radar reflectance is dependent on both surface roughness and the dielectric constant of the surface material. These two parameters can in many cases be related to lithologic units. Thus, if the first-order terrain effects due to topographic relief could (in essence) be removed from the radar image, the SAR data might well be used for lithologic discrimination. Such an approach is evaluated. Landsat Thematic Mapper data along with ground truth are used to define training cells that characterize the various lithologic units in the area. By aggregating the radar data for these cells, curves of radar reflectance versus local incidence are estimated. The curves are then used to classify the test area. The results are compared with lithologic classification based upon multi-spectral (visible and infrared) data.

Parr, J. T.↗

Intraband Radiometric Performance of the LANDSAT 4 Thematic Mapper

Those radiometric characteristics of the LANDSAT 4 thematic mapper (TM) that could be established without absolute calibration of spectral data were examined. Radiometrically raw (B type) data of three daytime and two nighttime scenes were used, including TM scenes from Washington, DC; northeast Arkansas; Cape Cod, MA; Roanoke, VA; Richmond, VA; and Silver Bell, AZ. The effective resolution in radiance is degraded by a factor of about 2 by the irregular width of the digital levels. Underpopulated levels are consistent over all bands and detectors, and are spaced an average of 4 digital numbers (DN) apart. In band 6, level 127 is avoided by a factor 30. Several detectors exhibit a change of gain with a period of several scans; the largest effect is about 4%. At high contrast boundaries, some of the detectors in band 5 commonly overshoot by several DN and require about 30 samples to recover. The high frequency noise level of each detector was characterized by the standard deviation of the first derivative in the sample direction across a flat field. A coherent-sinusoidal-noise pattern is evident in detector 1 of band 3. The correlation between the six reflective bands was determined and used to select three groups of bands whose aggregate first principal components contain the greatest total information. A composite of the first components of bands 1, 2, 3, bands 5 and 7, and band 4, together containing 89% of the information in the reflectance bands, has reduced the effect of noise.

Kieffer, H. H.↗

Evolution of Grains in a Turbulent Solar Nebula

Planetesimal formation by gravitational instability of a dust layer requires a nonturbulent solar nebula. The assumption that the solar nebula is a turbulent, convective accretion disk is explored. Self consistent models of a convective disk depend on high opacity of the disk material, which must be provided by grains. Grain coagulation is implied by the requirement of forming planetesimals, as the turbulent velocities (approx. 1/3 sound speed) in the accretion disk would disrupt any dust layer. Collisional coagulation could form large planetesimals, simultaneously leaving a sufficient fraction of matter in small grains to maintain the nebula's opacity. Or, coagulation of grains into small (approx. cm) aggregates could lower the opacity enough for turbulence to decay. The evolution of a population of grains in a turbulent solar nebula is calculated numerically.

Weidenschilling, S. J.↗

Progress on Experimental Impact Studies

Experimental impact studies were undertaken. Ejecta velocity distributions and related results from regolith targets were studied. The velocity distributions, energy partitioning, and related properties from 14 impacts at speeds 5 to 2321 m/s in vacuo into regolith-like fine powders were derived. Data are analyzed on: velocity and mass distributions as a function of azimuth around the crater during oblique impacts catastrophic disruption of spherical targets of variable strength, and catastrophic disruption of irregular-shaped natural rock targets and artificial granular aggregate targets.

Hartmann, W. K.↗

Reactanceless synthesized impedance bandpass amplifier

An active R bandpass filter network is formed by four operational amplifier stages interconnected by discrete resistances. One pair of stages synthesize an equivalent input impedance of an inductance (L sub eq) in parallel with a discrete resistance (R sub o) while the second pair of stages synthesizes an equivalent input impedance of a capacitance (C sub eq) serially coupled to another discrete resistance (R sub i) coupled in parallel with the first two stages. The equivalent input impedances aggregately define a tuned resonant bandpass filter in the roll-off regions of the operational amplifiers.

Kleinberg, L. L.↗

Constitutive Modeling of Superalloy Single Crystals and Directionally Solidified Materials

A unified viscoplastic constitutive relation based on crystallographic slip theory was developed for the deformation analysis of nickel base face centered cubic superalloy single crystals at elevated temperature. The single crystal theory is embedded in a self consistent method to derive a constitutive relation for a directionally solidified material comprised of a polycrystalline aggregate of columnar cylindrical grains. One of the crystallographic axes of the cylindrical crystals points in the columnar direction while the remaining crystallographic axes are oriented at random in the basal plane perpendicular to the columnar direction. These constitutive formulations are coded in FORTRAN for use in nonlinear finite element and boundary element programs.

Walker, K. P.↗

On the formation of meteoritic chondrules by aerodynamic drag heating in the solar nebula

During the formation of the solar nebula, interstellar grains were falling into the nebula with velocities of the order of 10 km/s at the radial distance where the meteorites were to form. This kinetic energy is 20 times the amount of thermal energy needed to melt the grains. The grains were decelerated by aerodynamic drag in the nebula. Where grain-rich parcels of interstellar material fell into the nebula, heat generated by drag could not be radiated away because of the opacity imparted to the system by the grains, and high temperatures were reached. In this situation presolar aggregations of grains would melt to form chondrules. Many of the properties of chondrules (and also Ca/Al-rich inclusions) are consistent with their formation by this means. The infall-heating concept provides a new framework in which the formation and significance of chondritic meteorites can be understood.

Wood, J. A.↗

Selection of a map grid for data analysis and archival

Arguments for selection of a map grid are reiterated by illustrating the quantitative effects on data quality caused by using different grids. It is shown that the use of the rectangular latitude-longitude grid actually degrades data quality, increases stored data volume, and increases the complexity of data manipulation. Use of an equal-area grid is shown to be a proper way to aggregate data, but such grids are thought to be inconvenient. A solution to this dilemma is proposed by showing that the analysis and archival map grids need not be the same. The results of a proper analysis of the data on an equal-area grid can be remapped to the more 'convenient' rectangular latitude-longitude grid without loss of quality.

Rossow, W. B.↗

QSO X-ray spectra and the contribution of QSOs to the X-ray background radiation

It has been suggested that QSOs make up a substantial fraction of the unresolved X-ray background (XRB) in the 0.5-3 keV energy band. The XRB is poorly known at these energies due to contamination by diffuse galactic emission. The XRB spectrum is precisely measured above 3 keV, and the aggregate spectrum of the proposed contributors should match its form. Seyfert galaxies are thought to contribute 20-30 percent (3-10 keV), and they have been shown to have power-law energy indices of roughly 0.7. The 1-15 keV average spectrum of a sample of optically bright QSOs and a 90 percent confidence range is found for a power law index of 0.83 for N(H) of less than 3 x 10 to the 20th atoms per sq cm. It is also found that QSOs with spectra most consistent with these measurements can contribute about 30 percent at most of the 3-10 keV XRB, or else the remaining contributors have intriguing spectra which rise with energy up to 10 keV and fall sharply thereafter. Alternativey, the X-ray spectral shape of QSOs is a function of redshift and/or radio luminosity.

Worrall, D. M.↗

Flight critical system design guidelines and validation methods

Efforts being expended at NASA-Langley to define a validation methodology, techniques for comparing advanced systems concepts, and design guidelines for characterizing fault tolerant digital avionics are described with an emphasis on the capabilities of AIRLAB, an environmentally controlled laboratory. AIRLAB has VAX 11/750 and 11/780 computers with an aggregate of 22 Mb memory and over 650 Mb storage, interconnected at 256 kbaud. An additional computer is programmed to emulate digital devices. Ongoing work is easily accessed at user stations by either chronological or key word indexing. The CARE III program aids in analyzing the capabilities of test systems to recover from faults. An additional code, the semi-Markov unreliability program (SURE) generates upper and lower reliability bounds. The AIRLAB facility is mainly dedicated to research on designs of digital flight-critical systems which must have acceptable reliability before incorporation into aircraft control systems. The digital systems would be too costly to submit to a full battery of flight tests and must be initially examined with the AIRLAB simulation capabilities.

Holt, H. M.↗

Petrographic studies of refractory inclusions from the Murchison meteorite

Textural and mineral-chemical data on freeze-thaw disaggregated refractory inclusions from the Murchison meteorite are reported. The data were obtained with neutron activation analysis, SEM, and spectroscopy, the study revealed corundum-bearing inclusions, spinel-hibonite aggregates and spherules, and spinel-pyroxene and elivine-pyroxene inclusions. One of the three spinel-, pyroxene-, forsterite-rich inclusions had an amoeba-shaped spinel-pyroxene core, implying vapor-to-solid condensation and therefore crystallization from a melt. It is concluded that the meteorite formation encompassed diverse nebular materials, and that further studies of the meteorite will enhance the data base on the planetary nebular processes.

Macpherson, G. J.↗

Evolution of grains in a turbulent solar nebula

In the present computation of the evolution of grain size distribution in a turbulent disk for turbulent solar nebula models, using realistic collisional outcomes and strengths of grain aggregates, the half space above the central plane of the disk is divided into a series of levels. At each level, the size distribution is represented by the population of a series of discrete size bins, each spanning an order of magnitude in mass. Coagulation, erosion, or disruption, occur for various combinations of relative particle sizes and velocities, together with assumed material strength, based on experimental impact data. The calculation is one-dimensional, in that it is performed at a single radial location in the disk.

Weidenschilling, S. J.↗