Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Parallel Guanine Duplex and Cytosine Duplex DNA with Uninterrupted Spines of Ag I -Mediated Base Pairs

Here, hydrogen bonding between nucleobases produces diverse DNA structural motifs, including canonical duplexes, guanine (G) quadruplexes, and cytosine (C) i-motifs. Incorporating metal-mediated base pairs into nucleic acid structures can introduce new functionalities and enhanced stabilities. Here we demonstrate, using mass spectrometry (MS), ion mobility spectrometry (IMS), and fluorescence resonance energy transfer (FRET), that parallel-stranded structures consisting of up to 20 G–Ag I –G contiguous base pairs are formed when natural DNA sequences are mixed with silver cations in aqueous solution. FRET indicates that duplexes formed by poly(cytosine) strands with 20 contiguous C–Ag I –C base pairs are also parallel. Silver-mediated G-duplexes form preferentially over G-quadruplexes, and the ability of Ag + to convert G-quadruplexes into silver-paired duplexes may provide a new route to manipulating these biologically relevant structures. IMS indicates that G-duplexes are linear and more rigid than B-DNA. DFT calculations were used to propose structures compatible with the IMS experiments. Such inexpensive, defect-free, and soluble DNA-based nanowires open new directions in the design of novel metal-mediated DNA nanotechnology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembled BaTiO 3 –Au x Ag 1– x Low-Loss Hybrid Plasmonic Metamaterials with an Ordered “Nano-Domino-like” Microstructure

Metallic plasmonic hybrid nanostructures have attracted enormous research interest due to the combined physical properties coming from different material components and the broad range of applications in nanophotonic and electronic devices. However, the high loss and narrow range of property tunability of the metallic hybrid materials have limited their practical applications. In this study, a metallic alloy-based self-assembled plasmonic hybrid nanostructure, i.e., a BaTiO 3 –Au x Ag 1– x (BTO) vertically aligned nanocomposite, has been integrated by a templated growth method for low-loss plasmonic systems. Comprehensive microstructural characterizations including high-resolution scanning transmission electron microscopy (HRSTEM), energy-dispersive X-ray spectroscopy (EDS), and three-dimensional (3D) electron tomography demonstrate the formation of an ordered “nano-domino-like” morphology with Au 0.4 Ag 0.6 nanopillars as cylindrical cores and BTO as square shells. By comparing with the BTO–Au hybrid thin film, the BTO–Au 0.4 Ag 0.6 alloyed film exhibits much broader plasmon resonance, hyperbolic dispersion, low-loss, and thermally robust features in the UV–vis–NIR wavelength region. This study provides a feasible platform for a complex alloyed plasmonic hybrid material design with low-loss and highly tunable optical properties toward all-optical integrated devices.

36 MATERIALS SCIENCE↗

Characterization of the Antiferromagnetism in Ag(pyz)2(S2O8) with a Two-Dimensional Square Lattice of 4d9 Ag2+ Ions

X-ray powder diffraction and magnetic susceptibility measurements show that Ag(pyz){sub 2}(S{sub 2}O{sub 8}) consists of 2D square nets of Ag{sup 2+} ions resulting from the corner-sharing of axially elongated AgN{sub 4}O{sub 2} octahedra and exhibits characteristic 2D antiferromagnetism. Nevertheless, {mu}{sup +}SR measurements indicate that Ag(pyz){sub 2}(S{sub 2}O{sub 8}) undergoes 3D magnetic ordering below 7.8(3) K.

36 MATERIALS SCIENCE↗

Ag 2 Se to KAg 3 Se 2 : Suppressing Order–Disorder Transitions via Reduced Dimensionality

Here we report an order–disorder phase transition in the 2D semiconductor KAg 3 Se 2 , which is a dimensionally reduced derivative of 3D Ag 2 Se. At ~695 K, the room temperature β-phase (CsAg 3 S 2 structure type, monoclinic space group C2/m) transforms to the high temperature α-phase (new structure type, hexagonal space group R$ \overline{3}\ $m, a = 4.5638(5) Å, c = 25.4109(6) Å), as revealed by in situ temperature-dependent X-ray diffraction. Significant Ag + ion disorder accompanies the phase transition, which resembles the low temperature (~400 K) superionic transition in the 3D parent compound. Ultralow thermal conductivity of ~0.4 W m –1 K –1 was measured in the “ordered” β-phase, suggesting anharmonic Ag motion efficiently impedes phonon transport even without extensive disordering. The optical and electronic properties of β-KAg 3 Se 2 are modified as expected in the context of the dimensional reduction framework. UV–vis spectroscopy shows an optical band gap of ~1 eV that is indirect in nature as confirmed by electronic structure calculations. Electronic transport measurements on β-KAg 3 Se 2 yielded n-type behavior with a high electron mobility of ~400 cm 2 V –1 s –1 at 300 K due to a highly disperse conduction band. Finally, our results thus imply that dimensional reduction may be used as a design strategy to frustrate order–disorder phenomena while retaining desirable electronic and thermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ag@SiO2 Core-shell Nanoparticles for Probing Spatial Distribution of Electromagnetic Field Enhancement via Surface-Enhanced Raman Scattering

We show that the spatial distribution of the electromagnetic (EM) field enhancement can be probed directly via dynamic evolution of surface-enhanced Raman scattering (SERS) of Rhodamine 6G (R6G) molecules as they diffuse into Ag@SiO2 core-shell nanoparticles. The porous silica shell limits the diffusion of R6G molecules towards inner Ag cores, thereby allowing direct observation and quantification of the spatial distribution of SERS enhancement as molecules migrate from the low to high EM fields inside the dielectric silica shell. Our experimental evidence is validated by the generalized Mie theory, and the approach can potentially offer a novel platform for further investigating the site and spatial distribution of the EM fields and the EM versus chemical enhancement of SERS due to molecular confinement within the Ag@SiO2 nanoshell.

36 MATERIALS SCIENCE↗

Anomalous Growth Rate of Ag Nanocrystals Revealed by in situ STEM

In situ microscopy of colloidal nanocrystal growth offers a unique opportunity to acquire direct and straightforward data for assessing classical growth models. For this study, we observe the growth trajectories of individual Ag nanoparticles in solution using in situ scanning transmission electron microscopy. For the first time, we provide experimental evidence of growth rates of Ag nanoparticles in the presence of Pt in solution that are significantly faster than predicted by Lifshitz-Slyozov-Wagner theory. We attribute these observed anomalous growth rates to the synergistic effects of the catalytic properties of Pt and the electron beam itself. Transiently reduced Pt atoms serve as active sites for Ag ions to grow, thereby playing a key role in controlling the growth kinetics. Electron beam illumination greatly increases the local concentration of free radicals, thereby strongly influencing particle growth rate and the resulting particle morphology. Through a systematic investigation, we demonstrate the feasibility of utilizing these synergistic effects for controlling the growth rates and particle morphologies at the nanoscale. Our findings not only expand the current scope of crystal growth theory, but may also lead to a broader scientific application of nanocrystal synthesis.

36 MATERIALS SCIENCE↗

Control of Separation and Diameter of Ag Nanorods through Self-organized Seeds

This paper proposes a mechanism of controlling the diameter and separation of metallic nanorods from physical vapor deposition through self-organized seeds and experimentally demonstrates the feasibility using Ag as the prototype metal, In as the seed and Si the substrate. Being non-wetting on Si substrates, deposited In atoms self-organize into islands. Subsequently deposited Ag atoms attach to In islands, rather than to Si substrates, due to preferential bonding and geometrical shadowing. The experimental results show that self-organized In seeds of 5 nm nominal thickness give rise to the best separation and the smallest diameter of Ag nanorods.

Science & Technology - Other Topics↗

Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass

Fluctuation electron microscopy of bulk metallic glasses of CuZrAl(Ag) demonstrates that medium-range order is sensitive to minor compositional changes. Furthermore, by analyzing nanodiffraction patterns medium-range order is detected with crystal-like motifs based on the B2 CuZr structure and its distorted structures resembling the martensitic ones. This result thus demonstrates some structural homology between the metallic glass and its high temperature crystalline phase. The amount of medium-range order seems slightly affected with increasing Ag concentration (0, 2, 5 at.%) but the structural motifs of the medium-range ordered clusters become more diverse at the highest Ag concentration. The decrease of dominant clusters is consistent with the destabilization of the B2 structure measured by calorimetry and accounts for the increased glass-forming ability.

36 MATERIALS SCIENCE↗

Si photocathode with Ag-supported dendritic Cu catalyst for CO 2 reduction

Si photocathodes integrated with Ag-supported dendritic Cu catalysts are used to perform light-driven reduction of CO 2 to C 2 and C 3 products in aqueous solution. A back illumination geometry with an n-type Si absorber was used to permit the use of absorbing metallic catalysts. Selective carrier collection was accomplished by a p + implantation on the illumination side and an n + implantation followed by atomic layer deposition of TiO 2 on the electrolyte site. The Ag-supported dendritic Cu CO 2 reduction catalyst was formed by evaporation of Ag followed by high-rate electrodeposition of Cu to form a high surface area structure. Under simulated 1 sun illumination in 0.1 M CsHCO 3 saturated with CO 2 , the photovoltage generated by the Si (~600 mV) enables C 2 and C 3 products to be produced at -0.4 vs. RHE. Texturing of both sides of the Si increases the light-limited current density, due to reduced reflection on the illumination side, and also deceases the onset potential. Under simulated diurnal illumination conditions photocathodes maintain over 60% faradaic efficiency to hydrocarbon and oxygenate products (mainly ethylene, ethanol, propanol) for several days. After 10 days of testing, contamination from the counter electrode is observed, which causes an increase in hydrogen production. This effect is mitigated by a regeneration procedure which restores the original catalyst selectivity. Finally, a tandem, self-powered CO 2 reduction device was formed by coupling a Si photocathode with two series-connected semitransparent CH 3 NH 3 PbI 3 perovskite solar cells, achieving an efficiency for the conversion of sunlight to hydrocarbons and oxygenates of 1.5% (3.5% for all products).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resistive switching properties of high crystallinity and low-resistance Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} thin film with point-contacted Ag electrodes

A high-crystallinity, low-resistance Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3}(PCMO) thin film deposited by sputtering at 600 deg. C showed no resistive switching with a Pt/Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3}/Pt structure but a remarkable bipolar resistive switching with a Ag paste/Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3}/Pt structure. Observed retention fatigue of the low-resistance state was almost saturated after 24 h. The resistive switching properties were characterized as point contact of Ag grains to PCMO thin film. It was also found that the interface can form interfacial trap states and resistive change active layers. This strongly suggests that the function of the Ag point contact is similar to those of the previously proposed filament path and the nanodomain switch.

36 MATERIALS SCIENCE↗

LOW TEMPERATURE THERMOELECTRIC PROPERTIES OF Bi-Sb ALLOYS WITH PARTIAL SUBSTITUTION OF Ag OR Zn FOR Sb

Bi-Sb-Ag and Bi-Sb-Zn alloys with the general formula of Bi{sub 85}Sb{sub 15-x}Ag{sub x}(x = 0, 1, 3, 5, 7) and Bi{sub 85}Sb{sub 15-x}Zn{sub x}(x = 1, 3, 5, 7), respectively, were prepared by mechanical alloying and subsequent pressure-less sintering. The phase structures of the samples were investigated by X-ray diffraction. Thermoelectric properties were investigated by measuring electrical conductivity, Seebeck coefficient and thermal conductivity in the temperature range of 80-300 K. The results show that the figure-of-merit of sample Bi{sub 85}Sb{sub 14}Ag{sub 1} reach a maximum value of 2.16x10{sup -3} K{sup -1} at 219 K, which is twice as large as that of the reference sample Bi{sub 85}Sb{sub 15}. The value of 1.58x10{sup -3} K{sup -1} for figure-of-merit was obtained in the sample Bi{sub 85}Sb{sub 14}Zn{sub 1} at 155 K, which is about 78 percent larger than that of the reference sample Bi{sub 85}Sb{sub 15} at the same temperature. The maximum figure-of-merit value is obviously shifted towards lower temperature region.

36 MATERIALS SCIENCE↗

Chemical patterning of Ag(111): Spatially confined oxide formation induced by electron beam irradiation

Low energy electron irradiation of a Ag(111) surface during NO{sub 2} adsorption at 300 K induces formation of Ag oxide. Using a spatially confined electron beam, small Ag{sub 2}O spots could be grown with a sharp, {approx}100 nm wide, boundary to the nonirradiated metallic surface. Since the structure size will mainly depend on the sharpness of the irradiating electron beam, this process has the potential of a single step nanostructuring process. Temperature treatment offers an easy way to manipulate the boundary between oxide and metallic silver by steering a chemical front.

36 MATERIALS SCIENCE↗

Tuning the electronic properties of the golden buckyball by endohedral doping: M@Au16(-) (M=Ag,Zn, In)

The golden Au16 cage is doped systematically with an external atom of different valence electrons:Ag, Zn, and In. The electronic and structural properties of the doped clusters, MAu16 (M=Ag,Zn, In), are investigated by photoelectron spectroscopy and theoretical calculations. It is observed that the characteristic spectral features of Au16, reflecting its near tetrahedral (Td) symmetry, are retained in the photoelectron spectra of MAu16, suggesting endohedral structures with little distortion from the parent Au16 cage for the doped clusters. Density functional calculations show that the endohedral structures of M@Au16 with Td symmetry are low-lying structures, which give simulated photoelectron spectra in good agreement with the experiment. It is found that the dopant atom does not significantly perturb the electronic and atomic structures of Au16, but simply donate its valence electrons to the parent Au16 cage, resulting in a closed-shell 18-electron system for Ag@Au16, a 19-electron system for Zn@Au16 with a large energy gap,and a 20-electron system for In@Au16. The current work shows that the electronic properties of the golden buckyball can be systematically tuned through doping.

36 MATERIALS SCIENCE↗

Fabrication and characterization of extended arrays of Ag{sub 2}S/Ag nanodot resistive switches

Well-ordered Ag{sub 2}S/Ag nanodot arrays with a density of >60 Gbit/in.{sup 2} have been fabricated by sputtering Ag on a silicon substrate using ultrathin porous anodic aluminum oxide membranes as shadow masks, followed by sulfurization treatment at room temperature. The morphology, microstructure, and electrical properties of the as-prepared nanodots were characterized by scanning electron microscopy, x-ray diffractometry, transmission electron microscopy, and conductive atomic force microscopy, respectively. Well-defined resistive switching behavior was observed in these nanodots, and the ON/OFF ratio was found to be higher than 10{sup 2}. The Ag{sub 2}S/Ag nanodot arrays hold substantial promise for use as ultrahigh density nonvolatile memory devices.

36 MATERIALS SCIENCE↗

Granular L1{sub 0} FePt-B and FePt-B-Ag (001) thin films for heat assisted magnetic recording

A comparison was made of FePt-B and FePt-B-Ag thin films having different volume contents of boron, which were RF sputtered with in-situ heating at 425-575 deg. C onto Si substrates with 20 nm thick (002) MgO. By introducing boron into FePt and varying the sputtering conditions, films with grain sizes ranging from 2.5 to 10 nm were produced. The boron promoted columnar growth, but made ordering more difficult. However, by adding Ag into FePt-B, ordering improved while coercivity increased from 7 to 11 kOe with no significant impact on the microstructure. We obtained films with grain sizes down to 2.5 nm with center-to-center spacing of 3.1 nm. The reduced grain size, columnar microstructure and increase in ordering and coercivity by adding Ag into the FePt-B thin films are favorable for application in heat assisted magnetic recording.

36 MATERIALS SCIENCE↗

Thermodynamic, Raman and electrical switching studies on Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses

We have investigated thermal properties of bulk Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses in detail, through alternating differential scanning calorimetry experiments. The composition dependence of thermal parameters reveal the signatures of rigidity percolation and chemical threshold at compositions x = 12 and x = 19, respectively. The stability and glass forming ability of these glasses have also been determined using the data obtained from different thermodynamic quantities and it is found that the Si{sub 15}Te{sub 85-x}Ag{sub x} glasses in the region 12 {<=} x {<=} 17 are more stable when compared to other glasses of the same series. Further, the blueshift observed in Raman spectroscopy investigations, in the composition range 12 {<=} x {<=} 13, support the occurrence of stiffness threshold in this composition range. All Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses are found to exhibit memory type switching (for sample thickness 0.25 mm) in the input current range 3-9 mA. The effect of rigidity percolation and chemical thresholds on switching voltages are observed at x = 12 and 19, respectively.

36 MATERIALS SCIENCE↗

Properties of nano structured Ag-TiO{sub 2} composite coating on stainless steel using RF sputtering method

RF Sputtering system is one of the Physical Vapour Deposition (PVD) methods that have been widely used to produce hard coating. This technique is used to deposit thin layers of metallic substrates such as stainless steel (SS). From this process, a good adhesiveness and wear resistance coating can be produced for biomedical applications. In this study, RF sputtering method was used to deposit TiO{sub 2}-Ag composite coatings via various deposition parameters. The parameters are RF power of 350W, gas composition (Ar: O{sub 2}) 50:5 and deposition time at 1, 2, 4 and 6 hours. Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and Raman spectroscopy were used to characterize surface area of coated samples. The formation of nanocrystalline thin film and the surface morphology were examined using SEM. The crystallite size of TiO{sub 2}-Ag composite coatings were estimated between 20-60 nm based on XRD analysis using Scherer equation and SEM evaluation. The Raman and XRD results suggested that the structure of the TiO{sub 2}-Ag consist of anatase and rutile phases. It also showed that the intensity of anatase peaks increased after samples undergone annealing process at 500 Degree-Sign C.

36 MATERIALS SCIENCE↗