Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Silicon dendritic web growth thermal analysis task

A thermal analysis model is presented which describes the dendritic ribbon process. The model uses a melt-dendrite interface which projects out of the bulk melt as the basic interpretation of the ribbon production process. This is a marked departure from the interpretations of the interface phenomena which were used previously. The model was extensively illustrated with diagrams and pictures of ribbon samples. This model should have great impact on the analyses of experimental data as well as on future design modifications of ribbon-pulling equipment.

Richter, R.↗
NASA NTRS1986

On some equivalent configurations of systolic arrays

A systematic approach is presented for designing systolic arrays and their equivalent configurations for certain general classes of recursively formulated algorithms. A new method is also introduced to reduce the input bandwidth and storage requirements of the systolic arrays through the study of dependence among the input data. Many well known systolic arrays can be rederived and also many new systolic arrays can be discovered by this approach.

Chang, C. Y.↗
NASA NTRS1985

Interpretation of ozone temperature correlations. II - Analysis of SBUV ozone data

In an effort to understand the behavior of ozone in the transition region, the terms in the perturbation continuity equation have been evaluated from solar backscattered ultraviolet ozone data, National Meteorological Center temperature data, and geostrophic winds derived from the temperature data at 2 mbar, winter 1978-1979. A linear parameterization is used to estimate the chemical source term. The perturbation ozone field calculated by integrating the net forcing evaluated from the data compares well with the measured perturbation ozone field. There are occasions during the winter when the sum of the dynamic terms is small due to cancellation, and the ozone and temperature perturbations are anticorrelated. The -1 correlation between the ozone and temperature perturbations does not necessarily imply that chemical forcing is dominant.

Douglass, A. R.↗
NASA NTRS1986

Numerical modeling of rotor flows with a conservative form of the full-potential equations

A computer program has been developed to solve a three-dimensional conservative formulation of the full-potential equation. Its ability to solve transonic, unsteady rotor flows is demonstrated by comparison to forward flight non-lifting pressure data at low to moderate advance ratios. A 'split potential' formulation has been added to the code which incorporates known vorticity fields into the full-potential calculation. Using this methodology, rotor wake contributions have been incorporated into the computer code. Pressure results are presented for lifting rotors in hover. These results are compared to experimental data as well as to other predictions.

Strawn, R. C.↗
NASA NTRS1986

Optimal design of structures with multiple design variables per group and multiple loading conditions on the personal computer

A finite element based programming system for minimum weight design of a truss-type structure subjected to displacement, stress, and lower and upper bounds on design variables is presented. The programming system consists of a number of independent processors, each performing a specific task. These processors, however, are interfaced through a well-organized data base, thus making the tasks of modifying, updating, or expanding the programming system much easier in a friendly environment provided by many inexpensive personal computers. The proposed software can be viewed as an important step in achieving a 'dummy' finite element for optimization. The programming system has been implemented on both large and small computers (such as VAX, CYBER, IBM-PC, and APPLE) although the focus is on the latter. Examples are presented to demonstrate the capabilities of the code. The present programming system can be used stand-alone or as part of the multilevel decomposition procedure to obtain optimum design for very large scale structural systems. Furthermore, other related research areas such as developing optimization algorithms (or in the larger level: a structural synthesis program) for future trends in using parallel computers may also benefit from this study.

Nguyen, D. T.↗
NASA NTRS1985

Pilot usage of decoupled flight path and pitch controls

Data from decoupled flight maneuvers have been collected and analyzed for four AFTI-F-16 pilots operating this aircraft's highly augmented fly-by-wire control system, in order to obtain spectral density, cross spectra, and Bode amplitude data, as well as coherences and phase angles for the two longitudinal axis control functions of each of 50 20-sec epochs. The analysis of each epoch yielded five distinct plotted parameters for the left hand twist grip and right hand sidestick controller output time series. These two control devices allow the left hand to generate vertical translation, direct lift, or pitch-pointing commands that are decoupled from those of the right hand. Attention is given to the control patterns obtained for decoupled normal flight, air-to-air gun engagement decoupled maneuvering, and decoupled air-to-surface bombing run maneuvering.

Berkhout, J.↗
NASA NTRS1986

Selective factors in sun-weather research

Research on the correlations between solar wind/IMF disturbances and subsequent winter troposphere vorticity changes (denoted SV) are reviewed to investigate sun-weather relationships. Uncertainties in the research attempting to link short-term solar variations and associated changes in the lower atmosphere are discussed, and it is noted that such analyses have generally not addressed either the choice of parameters or the selective factors involved in the physical relationships existing between parameters. It is suggested that the identification of a viable mechanism scenario would require a detailed multiparameter selective factor analysis, extending to the investigation of the atmospheric data as well as the solar wind/IMF parameters.

Taylor, H. A., Jr.↗
NASA NTRS1986

Ephemerides of the Uranian satellites determined from earth-based astrometric and Voyager imaging observations

Uranian satellite ephemerides were needed by the Voyager project to support both navigation and acquisition of scientific data. This paper outlines the mathematical modeling approach taken to generate those ephemerides and discusses their pre-encounter development, real time updating, and post-encounter refinement. The results presented include the final set of model parameters which generate the ephemerides that best fit the Voyager optical data as well as the earth based observations of the satellites.

Jacobson, R. A.↗
NASA NTRS1987

Structural Dynamics of Filament-Wound Booster Rockets

Report summarizes program of measurements and calculations of vibrations in filament-wound composite models of Space Shuttle solid-rocket boosters. Vibrational behavior predicted by finite-element computer model of structural dynamics correlates well with data from tests on full- and quarter-scale models. Computer model developed with NASTRAN general-purpose structural-analysis computer code.

Bugg, F. M.↗
NASA NTRS1984

Component specific modeling

Modern jet engine design imposes extremely high loadings and temperatures on hot section components. A series of interdisciplinary modeling and analysis techniques which were specialized to address three specific components (combustor burner linings, hollow air-cooled turbine blades, and air-cooled turbine vanes) were developed and verified. These techniques will incorporate data as well as theoretical methods from many diverse areas, including cycle and performance analysis, heat transfer analysis, linear and nonlinear stress analysis, and mission analysis. Building on the proven techniques already available in these fields, the new methods developed will be integrated to predict temperature, deformation, stress, and strain histories throughout a complete flight mission.

Roberts, M. L.↗
NASA NTRS1986

A continued program of planetary study at the University of Texas McDonald Observatory

The beginning of eclipses of the Pluto-Charon system was detected. The onset of coma formation of P/Halley at 5.4 au was detected and evidence of sublimation at 4.8 au when CN emission was detected. Extensive spatial maps of the gas in the comae of comets Halley and Giacobini-Zinner were obtained in fall 1985. Halley was time variable, and Giacobini-Zinner was depleted in C2 and C3 relative to CN. Comet Kopff was shown to have a pre-perihelion brightness maximum of its gas, consistent with mantle development if the comet is a high obliquity object. New Haser model scale lengths for CN, C3, and C2 were determined using results from the Faint Comet Survey. Spectra of 12 asteroids in unusual orbits showed no evidence of any comet-like emission features. In particular, 3200 Phaethon (1983 TB) has no gas or dust coma, in spite of the similarity of its orbit with the Geminid meteor stream. Data were analyzed on Saturn's H2 and CH4 bands for the recent southern summer using a Tomasko-Doose type of haze distribution. This haze model fits the data moderately well, giving a CH4 mixing ratio of (4.2 + or 0.4)x003. Simple functions were found to approximate the collision-induced rotation-translation thermal opacity of H2.

Smith, H. J.↗
NASA NTRS1986

International Halley Watch: Discipline specialists for astronomy

The Astrometry Network of the International Halley Watch (IHW) has organized and coordinated more than 300 astrometric observers from 47 countries in an effort to provide for accurate positional information on comets Halley and Giacobini-Zinner. This information is being used to constantly update the existing orbits and ephemerides for the various flight projects to these two comets and also for the other ground-based observers within the IHW organization. The astrometric data, as well as the resultant orbits and ephemerides, are being distributed to all requesting observers and they will be cataloged within the general IHW archive system.

Yeomans, D. K.↗
NASA NTRS1986

Flared landing approach flying qualities. Volume 1: Experiment design and analysis

An inflight research study was conducted utilizing the USAF Total Inflight Simulator (TIFS) to investigate longitudinal flying qualities for the flared landing approach phase of flight. The purpose of the experiment was to generate a consistent set of data for: (1) determining what kind of commanded response the pilot prefers in order to flare and land an airplane with precision, and (2) refining a time history criterion that took into account all the necessary variables and their characteristics that would accurately predict flying qualities. The result of the first part provides guidelines to the flight control system designer, using MIL-F-8785-(C) as a guide, that yield the dynamic behavior pilots perfer in flared landings. The results of the second part provides the flying qualities engineer with a newly derived flying qualities predictive tool which appears to be highly accurate. This time domain predictive flying qualities criterion was applied to the flight data as well as six previous flying qualities studies, and the results indicate that the criterion predicted the flying qualities level 81% of the time and the Cooper-Harper pilot rating, within + or - 1, 60% of the time.

Weingarten, Norman C.↗
NASA NTRS1986

Flared landing approach flying qualities. Volume 2: Appendices

An in-flight research study was conducted utilizing the USAF/Total In-Flight Simulator (TIFS) to investigate longitudinal flying qualities for the flared landing approach phase of flight. A consistent set of data were generated for: determining what kind of command response the pilot prefers/requires in order to flare and land an aircraft with precision, and refining a time history criterion that took into account all the necessary variables and the characteristics that would accurately predict flying qualities. Seven evaluation pilots participated representing NASA Langley, NASA Dryden, Calspan, Boeing, Lockheed, and DFVLR (Braunschweig, Germany). The results of the first part of the study provide guidelines to the flight control system designer, using MIL-F-8785-(C) as a guide, that yield the dynamic behavior pilots prefer in flared landings. The results of the second part provide the flying qualities engineer with a derived flying qualities predictive tool which appears to be highly accurate. This time-domain predictive flying qualities criterion was applied to the flight data as well as six previous flying qualities studies, and the results indicate that the criterion predicted the flying qualities level 81% of the time and the Cooper-Harper pilot rating, within + or - 1%, 60% of the time.

Weingarten, Norman C.↗
NASA NTRS1987

Computation of full-coverage film-cooled airfoil temperatures by two methods and comparison with high heat flux data

Two methods were used to calculate the heat flux to full-coverage film cooled airfoils and, subsequently, the airfoil wall temperatures. The calculated wall temperatures were compared to measured temperatures obtained in the Hot Section Facility operating at real engine conditions. Gas temperatures and pressures up to 1900 K and 18 atm with a Reynolds number up to 1.9 million were investigated. Heat flux was calculated by the convective heat transfer coefficient adiabatic wall method and by the superposition method which incorporates the film injection effects in the heat transfer coefficient. The results of the comparison indicate the first method can predict the experimental data reasonably well. However, superposition overpredicted the heat flux to the airfoil without a significant modification of the turbulent Prandtl number. The results suggest that additional research is required to model the physics of full-coverage film cooling where there is significant temperature/density differences between the gas and the coolant.

Gladden, H. J.↗
NASA NTRS1986

Estimation of canopy parameters for inhomogeneous vegetation canopies from reflectance data. II - Estimation of leaf area index and percentage of ground cover for row canopies

The canopy reflectance (CR) model for row-planted vegetation proposed earlier has been tested for soybean canopies in three different stages of growth and for corn canopies at early and full growth stages. The model fits the field-measured bidirectional CR data quite well. It is shown that, by inverting this model, one could estimate the leaf area index as well as the percentage of ground cover quite accurately from measured canopy reflectances.

Goel, N. S.↗
NASA NTRS1986

UBV photometry of ten southern hemisphere active-chromosphere stars

High-precision UBV photometry of ten southern hemisphere active-chromosphere stars with strong Ca II H and K and/or H-alpha emission has been obtained. Eight of these stars showed variability during June 1985. Complete or partial light curves are presented for the stars, and these data, as well as mean V magnitudes and colors, are compared with the results of other investigators. In a number of cases, significant changes in photometric amplitude are found, which may serve to track the formation and evolution of active regions on these stars.

Bopp, Bernard W.↗
NASA NTRS1987

A fiber-optic technique for the measurement of contact angle in a clearance-fit pin-loaded hole

A fiber-optic technique for measuring contact angle during pin loading of a specimen is proposed. The experimental design and procedures for loading a 49.8-mm-diameter instrumented pin into an quasi-isotropic graphite-epoxy specimen are described. The optical fiber was located just above the surface of the pin outer diameter in order to obtain accurate pin-hole contact-angle measurements at increasing load levels. The movement of the optical fiber through the no-contact, contact, and no-contact regions is discussed; the photodiode output decreased monotonically as the fiber moved from the no-contact to the contact region and then decreased monotonically as the fiber moved from the contact region to the no-contact region. Variations in the contact angle measurements are examined as function of applied load level. The measurements are compared to contact angle values obtained using a finite element analysis and an electrical technique; it is determined that the data correlate well.

Prabhakaran, R.↗