Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unreliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Small Ion Channel Linking Molecular Simulations and Electrophysiology

Ion channels are pore-forming protein assemblies that mediate the transport of small ions across cell membranes. Otherwise, membrane bilayers would be almost impermeable to ions incapable to traverse the low dielectric constant, hydrophobic membrane core. Ion channels are ubiquitous to all life forms. In humans and other higher organisms they play the central role in conducting nerve impulses, cardiac functions, muscle contraction and apoptosis. On the other extreme of biological complexity, viral ion channels (viroporins) influence many stages of the virus infection cycle either through regulating virus replication, such as entry, assembly and release or modulating the electrochemical balance in the subcellular compartments of host cells. Ion channels were crucial components of protocells. Their emergence facilitated adaptation of nascent life to different environmental conditions. The earliest ion channels must have been much simpler than most of their modern ancestors. Viral channels are among only a few naturally occurring models to study the structure, function and evolution of primordial channels. Experimental studies of these properties are difficult and often unreliable. In principle, computational methods, and molecular dynamics (MD) simulations in particular, can aid in providing information about both the structure and the function of ion channels. However, MD suffers from its own problems, such as inability to access sufficiently long time scales or limited accuracy of force fields. It is, therefore, essential to determine the reliability of MD simulations. We propose to do so on the basis of two criteria. One is channel stability on time scales that extend for several microseconds or longer. The other is the ability to reproduce the measured ionic conductance as a function of applied voltage. If both the stability and the calculated ionic conductance are satisfactory it will greatly increase our confidence that the structure and the function of a channel are described sufficiently accurately. To our knowledge, long time scale stability (approx.10 micro-sec) and the correct electrophysiology have been shown so far for only one channel - the synthetic LS3 hexamer). In this presentation, this approach will be discussed in application to two viral channels - Vpu, encoded by the HIV-1 genome and p7 of hepatitis C.

Pohorille, Andrzej↗

Development of Reliable Life Support Systems

The life support systems on the International Space Station (ISS) are the culmination of an extensive effort encompassing development, design, and test to provide the highest possible confidence in their operation on ISS. Many years of development testing are initially performed to identify the optimum technology and the optimum operational approach. The success of this development program depends on the accuracy of the system interfaces. The critical interfaces include the specific operational environment, the composition of the waste stream to be processed and the quality of the product. Once the development program is complete, a detailed system schematic is built based on the specific design requirements, followed by component procurement, assembly, and acceptance testing. A successful acceptance test again depends on accurately simulating the anticipated environment on ISS. The ISS Water Recovery System (WRS) provides an excellent example of where this process worked, as well as lessons learned that can be applied to the success of future missions. More importantly, ISS has provided a test bed to identify these design issues. Mechanical design issues have included an unreliable harmonic drive train in the Urine Processor's fluids pump, and seals in the Water Processor's Catalytic Reactor with insufficient life at the operational temperature. Systems issues have included elevated calcium in crew urine (due to microgravity effect) that resulted in precipitation at the desired water recovery rate, and the presence of an organosilicon compound (dimethylsilanediol) in the condensate that is not well removed by the water treatment process. Modifications to the WRS to address these issues are either complete (and now being evaluated on ISS) or are currently in work to insure the WRS has the required reliability before embarking on a mission to Mars.

Carter, Layne↗

Machine Learning for Slow but Steady Interplanetary Construction

For prolonged manned missions to destinations such as the moon and Mars, there is a need for significant infrastructure construction ahead of time, such as habitats and landing pads. Unfortunately we have little experience in remote construction and using conventional methods is likely to be expensive, cumbersome and unreliable. Fortunately these challenges may be overcome by taking advantage of the long lead time for such missions and using teams of small and slow construction robots. We propose using teams of simple autonomous robots for this purpose that would perform continuous construction over a period of many years or even decades. While individual robot reliability will be low over such long time frames, system reliability will be maintained by using machine learning over simulations to achieve coordination and reconfigurations in the event of lost robots.

Tensegrity robots↗

NASA Electronic Parts and Packaging (NEPP) Field Programmable Gate Array (FPGA) Single Event Effects (SEE) Test Guideline Update

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

Test guidelines↗

NASA Electronic Parts and Packaging Field Programmable Gate Array Single Event Effects Test Guideline Update

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

Field Programmable Gate Array (FPGA)↗

Use of Nack Oriented Reliable Multicast (NORM) Protocol for Transport of Spacecraft Telemetry in Ground Networks

Frequently it is necessary to distribute spacecraft telemetry to multiple destinations on Internet Protocol (IP) networks. There are various methods of delivering this data, but when the data is high rate and there are many destinations IP multicast provides the best solution from a network perspective. However, IP multicast only supports the User Datagram Protocol (UDP) which is connectionless and unreliable. This nature of UDP and by extension the low priority treatment of UDP packets by some network hardware creates a difficult environment for distribution of high rate telemetry to a number of recipients over IP networks. NACK (Negative ACKnowledgment) Oriented Reliable Multicast (NORM) is defined by IETF (Internet Engineering Task Force) RFC (Request for Comments) 5740 in 2009 by B. Adamson et al. NORM provides a mechanism of retransmission and or forward error correction for UDP packets, potentially overcoming the limits of UDP for the transmission of spacecraft telemetry. Marshall Space Flight Center’s (MSFC) Huntsville Operations Support Center (HOSC) manages the delivery of the International Space Station (ISS) payload science and health data. The ISS IP Ground Routed (IIGoR) network provides the delivery of the data from the ground stations to the control centers. HOSC personnel have been experimenting with the use of NORM on the link between the ground stations and the front end processor equipment in Huntsville, AL.

Baldwin, Patrick A.↗

Status and Examples for the Version 06 IMERG Multi-Satellite Products

After five years of development following the launch of the Global Precipitation Measurement (GPM) missionCore Observatory, the GPM data products are now being extended across the joint Tropical Rainfall MeasuringMission (TRMM) and GPM eras. Version 06 of the U.S. GPM team's Integrated Multi-satellitE Retrievals forGPM (IMERG) merged precipitation product provides a consistent intercalibration for all precipitation productscomputed from individual satellites with the TRMM and GPM Core Observatory sensors as the TRMM- andGPM-era calibrators, respectively, and incorporates monthly surface gauge data. One major change in the basicIMERG algorithm for V06 is that precipitation motion vectors (used to drive the quasi-Lagrangian interpolation,or "morphing") are computed by tracking vertically integrated vapor (TQV) fields analyzed in MERRA2 andGEOS5. This innovation provides globally complete coverage, expanding IMERG's coverage beyond the 60N-Slatitude band previously provided by IR-based vectors, although precipitation over snowy/icy surfaces is stillmasked out as unreliable. A second innovation is that the Quality Index (QI) data field computed for the half-hourlydatasets has been refined to include estimates of correlation at microwave overpass times.We will summarize the processing status for V06 IMERG, for which the retrospective processing shouldbe actively advancing at meeting time. We will show early examples of performance. For example, the TQVmotion vectors are typically slightly better than the IR-based vectors at all latitudes. The transition across theTRMM/GPM data boundary will be discussed, including the necessity of filling in the TRMM-based calibrationsover the latitude band 35-65 in each hemisphere. The notional schedule for the eventual retirement of thepredecessor TRMM Multi-satellite Precipitation Analysis (TMPA) multi-satellite dataset will be updated as well.

Huffman, George J.↗

Fusion of Visible and Thermal-Infrared Imagery for SLAM for Landing on Icy Moons

This paper addresses the problem of localization for landing on the surface of icy moons, like Europa or Enceladus. Due to the possibility of specular reflection as well as high bulk albedo, icy surfaces present new challenges that make traditional vision-based navigation systems relying on visible imagery unreliable. We propose augmenting visible light cameras with a thermal-infrared camera using inverse-depth parameterized monocular EKF-SLAM to address problems arising from the appearance of icy moons. Results were obtained from a novel procedural Europa surface simulation which models the appearance and the thermal properties simultaneously from physically-based methods. In this framework, we show that thermal features improve localization by 23% on average when compared to a visible camera. Moreover, fusing both sensing modalities increases the improvement in localization to 31% on average, compared to using a visible light camera alone.

thermal vision↗

Multilevel Monte Carlo Estimation of Unbiased Expectation via Sample Reuse and the Low Variance Estimation of Asymptotic Rates

A new variant of the multilevel Monte Carlo estimator [5, 3, 9, 12] is presented for the estimation of expectation statistics that utilizes sample reuse in specified levels, explicitly removes approximation error bias associated with numerically computed output quantities of interest that have an asymptotic limit behavior, and permits a low variance estimate of the asymptotic rate of convergence to that limit. In addition, it is shown that this new multilevel Monte Carlo variant can yield a computational cost savings. A review of Monte Carlo and multilevel Monte Carlo estimators is presented that includes analysis of expected value, expected mean squared error, and the calculation of optimized multilevel sample size parameters. The multilevel Monte Carlo estimator produces estimates of expectation for numerically approximated output quantities of interest that are biased by approximation error. When the quantity of interest can be modeled as the asymptotic limit of numerically approximated output quantities of interest, it is theoretically possible to remove this approximation error bias in the multilevel Monte Carlo estimator. In actual implementations, however, this procedure is unreliable due to statistical variability and inaccuracy in estimating the needed asymptotic limit. Analysis and numerical experiment show that the proposed variant of the multilevel Monte Carlo method greatly reduces (in some cases eliminates) the statistical variability in this limit estimation.

Barth, Timothy↗

Algae to Enhance Water Recovery for Future Space Habitats

Bioregenerative technologies have been suggested for human life support in space for decades. Such technologies have not yet been incorporated due to 1) assumed unreliability and 2) bioregeneration rates for given processes are slower when compared to equivalent physical/chemical treatment technologies. Slower treatment capacity for biological system result in larger technology infrastructure (i.e., higher mass, power, and volume requirements), and thus less attractive. Current ISS (International Space Station) life support systems are strictly physical/chemical. However, bioregenerative systems are being suggested for future surface systems (on the Moon or Mars) due to the limited access to resupplied materials and continued need for resiliency and sustainability. In the realm of water reclamation, the ISS system processes only urine, metabolic condensates, and hygiene (i.e., handwash and oral, no shower or laundry) waters with 75 percent closure. For future surface habitats with 4 crew members, approximately 30 liters per day of wastewater will be generated, containing estimated 850 milligrams per liter NH4-N. Conventional algae PBRs (photobioreactors) require dilution to accommodate such high concentrations of ammonium. If dilution is required, resulting technology hardware will increase dramatically in mass. A new approach was explored, whereby high carbon dioxide (1200-2000 parts per million) and light (400-600 micromoles per square meter per second) conditions were provided to treat the undiluted wastewater stream. Daily treatment capacity for Chlorella sorokiniana and Chlorella vulgaris was observed to be 85 and 107 milligrams NH4-N per gram of biomass, respectively. This preliminary study shows that there is capacity to increase ammonium removal rates by algal species, and thus reactor size (mass and volume) for future surface systems. Smaller reactor volumes will help bioregenerative treatment technologies compete with the presently accepted physical/chemical treatment technologies.

Water Purification↗

Analytic Spacecraft Attitude and Rate Estimation Performance During Attitude Sensor Outages

Analytic expressions for spacecraft attitude and rate estimation performance of an attitude estimation filter in terms of sensor specifications are useful tools for spacecraft design. Farrenkopf (1978) famously found analytic expressions for steady-state pre-update and post-update attitude and gyro bias estimate error variances for an attitude estimation filter for a single-axis spacecraft with a Rate Output Gyro (ROG). Markley and Reynolds (2000) extended the analysis for a Rate-Integrating Gyro (RIG) with angle white noise. These expressions allow for the rapid evaluation of system performance during preliminary mission design phases. One contribution of this paper is the analytic calculation of the steady-state pre-update and post-update angular rate estimate uncertainty for both the ROG and RIG cases. The primary contribution of this paper is the extension of the results for both the ROG and the RIG cases to the situation of an attitude sensor outage. This situation arises frequently in practice; for example when a star sensor’s field of view is occluded, when a star sensor’s readings are unreliable during a thruster burn that vibrates the spacecraft, or during star sensor outages due to radiation upsets. Analytic expressions for the attitude estimate uncertainty, gyro bias estimate uncertainty, and angular rate estimate uncertainty are given in terms of the attitude sensor outage interval, the star tracker measurement noise, and gyro noise parameters. Validity of the analytic results is demonstrated via Monte Carlo simulation.

Galante, Joseph M.↗

Analytic Spacecraft Attitude and Rate Estimation Performance During Attitude Sensor Outages

Analytic expressions for spacecraft attitude and rate estimation performance of an attitude estimation filter in terms of sensor specifications are useful tools for spacecraft design. Farrenkopf (1978) famously found analytic expressions for steady-state pre-update and post-update attitude and gyro bias estimate error variances for an attitude estimation filter for a single-axis spacecraft with a Rate Output Gyro (ROG). Markley and Reynolds (2000) extended the analysis for a Rate-Integrating Gyro (RIG) with angle white noise. These expressions allow for the rapid evaluation of system performance during preliminary mission design phases. One contribution of this paper is the analytic calculation of the steady-state pre-update and post-update angular rate estimate uncertainty for both the ROG and RIG cases. The primary contribution of this paper is the extension of the results for both the ROG and the RIG cases to the situation of an attitude sensor outage. This situation arises frequently in practice; for example when a star sensor’s field of view is occluded, when a star sensor’s readings are unreliable during a thruster burn that vibrates the spacecraft, or during star sensor outages due to radiation upsets. Analytic expressions for the attitude estimate uncertainty, gyro bias estimate uncertainty, and angular rate estimate uncertainty are given in terms of the attitude sensor outage interval, the star tracker measurement noise, and gyro noise parameters. Validity of the analytic results is demonstrated via Monte Carlo simulation.

Galante, Joseph M.↗

Providing Data Access and Analysis Capabilities to SERVIR’s Data-Sparse Regions

In developing regions of the world, the communications infrastructure pose enormous challenges for using Earth observation data. Limited internet bandwidth along with the high costs make it almost impossible to process and extract zonal statistics over large periods of time for even small geographic areas. In such cases, downloading daily rainfall data or dekadal series of NDVI data would take days and consume all the bandwidth allocated to an organization (for reference, internet connections in Niger would cost thousands of dollars per month at a maximum - and unreliable - bandwidth of just 10 Mbps). Running crop models or hydrological models typically require several years of historic data over the area of interest (AOI). In some cases, these AOIs are relatively small compared to the footprint of individual earth observation granules. Hence, systems that let the stakeholders subset the data to download to a user specified area, or even submit processing requests that let them download small result files for the AOI become critical. The SERVIR program has developed a tool to provide this type of access to help decision makers in developing regions use long time series of adjusted rainfall data (CHIRPS), NDVI values, seasonal weather forecasts, evaporative stress indices and others in a very efficient manner. This system, named ClimateSERV (https://climateserv.servirglobal.net) ingests the datasets in an automated fashion and allows interactive access (through a web application), or automated access through a simple API that developers can quickly incorporate in independent applications. This way, the extraction of daily averages of rainfall over a 50 square Km area through 30 years of archived data takes only a few seconds to process, and the results can be presented on an online chart or downloaded in a comma separated file that's only a few Kb.

Ashmall, William↗

In-Time UAV Flight-Trajectory Estimation and Tracking Using Bayesian Filters

Rapid increase of UAV operation in the next decade in areas of on-demand delivery, medical transportation services, law enforcement, traffic surveillance and several others pose potential risks to the low altitude airspace above densely populated areas. Safety assessment of airspace demands the need for a novel UAV traffic management (UTM) framework for regulation and tracking of the vehicles. Particularly for low-altitude UAV operations, quality of GPS measurements feeding into the UAV is often compromised by loss of communication link caused by presence of trees or tall buildings in proximity to the UAV flight path. Inaccurate GPS locations may yield to unreliable monitoring and inaccurate prognosis of remaining battery life and other safety metrics which rely on future expected trajectory of the UAV. This work therefore proposes a generalized monitoring and prediction methodology for autonomous UAVs using in-time GPS measurements. Firstly, a typical 4D smooth trajectory generation technique from a series of waypoint locations with associated expected times-of-arrival based on B-spline curves is presented. Initial uncertainty in the vehicle's expected cruise velocity is quantified to compute confidence intervals along the entire flight trajectory using error interval propagation approach. Further, the generated planned trajectory is considered as the prior knowledge which is updated during its flight with incoming GPS measurements in order to estimate its current location and corresponding kinematic profiles. Estimation of position is denoted in dicrete state-space representation such that position at a future time step is derived from position and velocity at current time step and expected velocity at the future time step. A linear Bayesian filtering algorithm is employed to efficiently refine position estimation from noisy GPS measurements and update the confidence intervals. Further, a dynamic re-planning strategy is implemented to incorporate unexpected detour or delay scenarios. Finally, critical challenges related to uncertainty quantification in trajectory prognosis for autonomous vehicles are identified, and potential solutions are discussed at the end of the paper. The entire monitoring framework is demonstrated on real UAV flight experiments conducted at the NASA Langley Research Center.

Banerjee, Portia↗

Reaching for 20 Years with the IMERG Multi-Satellite Products

The latest releases of Global Precipitation Measurement (GPM) mission products cap five years of vigorous development cycle since the launch of the GPM Core Observatory, and these now provide datasets that are relatively homogeneous across the joint Tropical Rainfall Measuring Mission (TRMM) and GPM eras. Version 06 of the U.S. GPM team's Integrated Multi-satellitE Retrievals for GPM (IMERG) merged precipitation product enforces a consistent intercalibration for all precipitation products computed from individual satellites with the TRMM and GPM Core Observatory sensors as the TRMM- and GPM era calibrators, respectively, and incorporates monthly surface gauge data. The basic IMERG algorithm now features precipitation motion vectors (used to drive the Lagrangian interpolation, or "morphing") that arecomputed by tracking vertically integrated vapor fields analyzed in MERRA2 and GEOS5. This innovation provides globally complete coverage, expanding IMERG's coverage beyond the 60°N-S latitude band provided by IR-based vectors, although we continue to mask out precipitation over snowy/icy surfaces as unreliable. A second innovation is the Quality Index (QI) data field. The half-hourly QI is taken as the approximate Kalman Filter correlation computed in the morphing calculation.

Huffman, George J.↗

Trusted Communication: Utilizing Speech Communication to Enhance Human-Machine Teaming Success

An area of increasing interest for the next generation of aircraft is autonomy and the integration of increasingly autonomous systems into the national airspace. Such an integration requires humans to work closely with autonomous systems, forming teams. Our hypothesis is that a team composed of both humans and autonomous systems will operate better than either entity alone. We have existing procedures for certifying pilots to operate in the national airspace and are currently working on methods for validating the function of autonomous systems, however we have no method in place for assessing the interaction of these two disparate systems. Communication is one avenue. This paper will examine the use of language as a metric for ascertaining human-machine teaming effectiveness. A proof-of-concept of the application of two communication-based analysis techniques, Linguistic Inquiry and Word Count (LIWC) and Latent Semantic Analysis (LSA), for the prediction of success in human/chatbot teaming was conducted. By running these analyses over data from the 2014 and 2015 Loebner Prize competitions of human/chatbot teaming, numerical scores were obtained that can be associated with scores provided by human judges during the competition. Correlating their LIWC and LSA data with the scores provided by the judges, and using linear regression over this correlation, formulae were obtained that predict the score of human/chatbot interaction. These formulae were tested over the 2013 Loebner Prize transcripts, determining that, though there was strong correlation between predicted and actual scores, the predictive success of this method was not strong. However, with specialized topic spaces and lexica, as well as larger data sets, the predictive power of these metrics will improve. Given the importance of providing metrics for human-machine system team success and given the promise shown by the communication-basedLIWCand LSAmethods, continuing research in this area is necessary. After examining the potential for using communication and spoken language as a metric for the success of human/autonomous system teaming, this paper then examines aspects inherent to communication systems that may contribute to unreliability and reduced trust. Modern natural language processing tools rely on deep learning algorithms to create language rules that produce accurate results, but these rules are uninterpretable. The resulting blackbox system lacks transparency necessary for full validation and complete trust. Additionally, speech-based interfaces pose other difficulties to developing coordinated teamwork between humans and autonomous systems. Human communication is infrequently limited to speech only, instead usually relying on a combination of verbal, gestural, and general body language communication. Reducing an analysis of team effectiveness to a study of spoken language alone is problematic as it leaves these other equally important forms of communication out. This paper will examine these problems and the general deficiencies in speech-based metrics for human-machine teaming.

E L Meszaros↗

Move to Talk, Talk to Move: Tightly Integrated Communication and Control for Coordinated Swarms of Small Spacecraft

The Move to Talk, Talk to Move: Tightly Integrated Communication and Control for Coordinated Swarms of Small Spacecraft project will build on existing research on collaborative autonomy of multi-agent systems and design techniques that will enable coordinated communication and control of spacecraft. The success of many space exploration and science missions hinges on real-time monitoring of time-varying and/or geographically distributed phenomena. This monitoring can be achieved using a swarm of small spacecraft, which collect data about the environment and share information within the swarm of spacecraft. Current space exploration missions typically issue commands to control each spacecraft individually from Earth, and the data gathered by each spacecraft is also transmitted to Earth separately via X-band communication over the Deep Space Network (DSN). This approach is expensive, slow, and unreliable. Many coordinated tasks amongst a swarm of autonomous agents (or, specifically, small spacecraft) rely on communication. Existing control, estimation, and decision algorithms often assume that mostly reliable communications are available; however, this is often not the case in actual environments and thus is a barrier to operating swarms of small spacecraft.

Qi Han↗

TPSAS-NF1676L-35322-DND

This talk discusses emerging methods that seek to fuse and integrate physics-based modeling with machine learning. With the recent rise of machine learning and artificial intelligence, there has been a huge surge in data-driven approaches to solve computational science and engineering problems. However, neglecting a priori knowledge of established physical laws and relying solely on data-driven methods can yield unreliable, less interpretable, and/or non-physical results, especially when data is sparse or predictions are required outside of the training data domain. This two part talk presents two distinct approaches for accelerating predictions with machine learning that are grounded and constrained by relevant physics and their application to problems at NASA.

Julian Cuevas Paniagua↗