Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Structural and optical characterization of high-quality ZnO thin films deposited by reactive RF magnetron sputtering

Highlights: ► High-quality ZnO thin films were deposited at room temperature. ► Effect of O{sub 2} flow and RF sputtering voltages on properties of ZnO films were studied. ► O{sub 2}/Ar ratios played a key role in controlling optical properties of ZnO films. ► Photoluminescence intensity of the ZnO films strongly depended on O{sub 2}/Ar ratios. ► Crystallite size, stress and strain strongly depended on O{sub 2}/Ar ratios. - Abstract: ZnO thin films were deposited onto quartz substrates by radio frequency (RF) reactive magnetron sputtering using a Zn target. The structural and optical properties of the ZnO thin films were investigated comprehensively by X-ray diffraction (XRD), ultraviolet–visible and photoluminescence (PL) measurements. The effects of the oxygen content of the total oxygen–argon mixture and sputtering voltage in the sputtering process on the structural and optical properties of the ZnO films were studied systemically. The microstructural parameters, such as the lattice constant, crystallite size, stress and strain, were also calculated and correlated with the structural and optical properties of the ZnO films. In addition, the results showed that the crystalline quality of ZnO thin films improved with increasing O{sub 2}/Ar gas flow ratio from 2:8 to 8:2. XRD and PL spectroscopy revealed 800 V to be the most appropriate sputtering voltage for ZnO thin film growth. High-quality ZnO films with a good crystalline structure, tunable optical band gap as well as high transmittance could be fabricated easily by RF reactive magnetron sputtering, paving the way to obtaining cost-effective ZnO thin films transparent conducting oxides for optoelectronics applications.

36 MATERIALS SCIENCE↗

Effects of Nd-doping on optical and photovoltaic properties of barium titanate thin films prepared by sol–gel method

Graphical abstract: - Highlights: • We prepared Nd-doped BTO thin films by sol–gel method. • Addition of Nd to some extent can inhibit the grain growth. • Addition of Nd{sup 3+} ions can decrease band gap. • The remnant polarization of Nd-doped BTO thin films begins to increase and then decreases. • Photovoltaic properties of Nd-doped BTO thin films begin to increase then decrease. - Abstract: Nd-doped barium titanate thin films were prepared via sol–gel spin-coating method and effects of Nd content on microstructure, optical and photovoltaic properties have been investigated. The results show that Nd-doped barium titanate thin films are single tetragonal perovskite phase. Addition of neodymium to some extent can inhibit the grain growth. Substitution of Nd{sup 3+} ions for Ba{sup 2+} on A sites leads to the decrease of band gap. The remnant polarization begins to increase and reach the maximum and then decreases as Nd content increases. The short circuit photocurrent density, open circuit photovoltage and power conversion efficiency of Nd-doped barium titanate thin films begin to increase and reach the maximum and then decrease as Nd content increases.

36 MATERIALS SCIENCE↗

Au/SiO{sub x} composite thin film as catalyst for solvent-free hydrocarbon oxidation

Graphical abstract: Au/SiO{sub x} composite thin film possesses high catalytic activity and stability for selective oxidation of cis-cyclooctene. - Highlights: • Au/SiO{sub x} composite thin film was synthesized by a facile and efficient chemical approach. • The Au/SiO{sub x} composite thin film exhibits high catalytic ability for the selective oxidation. • The Au/SiO{sub x} composite thin film possesses high structural and catalytic stability. - Abstract: We report a facile and efficient chemical approach for the controllable preparation of Au/SiO{sub x} composite thin film using silicon quantum dots as SiO{sub x} sources. Au/SiO{sub x} composite thin film exhibits high catalytic activity (65.04% conversion based on cis-cyclooctene and 78.34% selectivity for 2-hydroxycyclooctanone) and stability for selective oxidation of cis-cyclooctene in the absence of solvent using TBHP as radical initiator and oxygen (in the air) as oxidant at 80 °C.

36 MATERIALS SCIENCE↗

A comparative study of physico-chemical properties of CBD and SILAR grown ZnO thin films

Graphical abstract: Schematic model indicating ZnO nanorods by CBD (Z{sub 1}) and nanograins by SILAR (Z{sub 2}). - Highlights: • Simple methods for the synthesis of ZnO thin films. • Comparative study of physico-chemical properties of ZnO thin films prepared by CBD and SILAR methods. • CBD outperforms SILAR method. - Abstract: In the present work, nanocrystalline zinc oxide (ZnO) thin films have been successfully deposited onto glass substrates by simple and economical chemical bath deposition (CBD) and successive ionic layer adsorption reaction (SILAR) methods. These films were further characterized for their structural, optical, surface morphological and wettability properties. The X-ray diffraction (XRD) patterns for both CBD and SILAR deposited ZnO thin films reveal the highly crystalline hexagonal wurtzite structure. From optical studies, band gaps obtained are 2.9 and 3.0 eV for CBD and SILAR deposited thin films, respectively. The scanning electron microscope (SEM) patterns show growth of well defined randomly oriented nanorods and nanograins on the CBD and SILAR deposited samples, respectively. The resistivity of CBD deposited films (10{sup 2} Ω cm) is lower than that of SILAR deposited films (10{sup 5} Ω cm). Surface wettability studies show hydrophobic nature for both films. From the above results it can be concluded that CBD grown ZnO thin films show better properties as compared to SILAR method.

36 MATERIALS SCIENCE↗

Characterization of ZnS thin films synthesized through a non-toxic precursors chemical bath

Highlights: • High quality ZnS thin films have been deposited by chemical bath deposition technique from a non-toxic precursor’s solution. • Nanocrystalline ZnS thin films with large band gap energy were synthesized without using ammonia. • Evidence that the growing of the thin films is carried out by means of hydroxide mechanism was found. • The properties of these ZnS thin films are similar and in some cases better than the corresponding ones produced using toxic precursors such as ammonia. - Abstract: In solar cells, ZnS window layer deposited by chemical bath technique can reach the highest conversion efficiency; however, precursors used in the process normally are materials highly volatile, toxic and harmful to the environment and health (typically ammonia and hydrazine). In this work the characterization of ZnS thin films deposited by chemical bath in a non-toxic alkaline solution is reported. The effect of deposition technique (growth in several times) on the properties of the ZnS thin film was studied. The films exhibited a high percentage of optical transmission (greater than 80%); as the deposition time increased a decreasing in the band gap values from 3.83 eV to 3.71 eV was observed. From chemical analysis, the presence of ZnS and Zn(OH){sub 2} was identified and X-ray diffraction patterns exhibited a clear peak corresponding to ZnS hexagonal phase (1 0 3) plane, which was confirmed by electron diffraction patterns. From morphological studies, compact samples with well-defined particles, low roughness, homogeneous and pinhole-free in the surface were observed. From obtained results, it is evident that deposits of ZnS–CBD using a non-toxic solution are suitable as window layer for TFSC.

36 MATERIALS SCIENCE↗

Electrochemical and microstructural characterization of magnetron-sputtered ATO thin films as Li–ion storage materials

Highlights: • Nano-structured ATO thin films prepared by RF magnetron sputtering at 25 °C, 100 °C and 200 °C, respectively. • ATO thin films show a high reversible capacity and high rate performance. • Electrochemical reaction mechanism of the ATO thin film was revealed by transmission electron microscopy. - Abstract: Sb-doped SnO{sub 2} (ATO) nanostructured thin films were prepared by using radio frequency magnetron sputtering at the substrate temperatures of 25 °C, 100 °C and 200 °C, respectively. All the ATO thin films have the similar redox characteristics in the cyclic voltammetry measurements. The ATO thin film sputtered at 200 °C shows the lowest charge transfer resistance and best electrochemical performance, and has a high reversible capacity of 679 mA h g{sup −1} at 100 mA g{sup −1} after 200 charge–discharge cycles and high rate performance of 483 mA h g{sup −1} at 800 mA g{sup −1}. The electrochemical mechanisms were investigated by analyzing the phase evolution of the ATO electrodes that had been electrochemically induced at various stages. The results reveal that the ATO underwent reversible lithiation/delithiation processes during the electrochemical cycles, i.e., the SnO{sub 2} reacted with Li{sup +} to produce metallic Sn and followed by the formation of the Li{sub x}Sn alloys during discharge process, and then Li{sub x}Sn alloys de-alloyed, Sn reacted with Li{sub 2}O, and even partially formed SnO{sub 2} during charge process.

36 MATERIALS SCIENCE↗

Thin films of copper antimony sulfide: A photovoltaic absorber material

Highlights: • CuSbS{sub 2} thin films were prepared by heating Sb{sub 2}S{sub 3}/Cu layers. • Analyzed the structure, composition, optical, and electrical properties. • PV structures: glass/SnO{sub 2}:F/n-CdS/p-CuSbS{sub 2}/C/Ag were formed at different conditions. • The PV parameters (J{sub sc}, V{sub oc}, and FF) were evaluated from the J–V characteristics. • J{sub sc}: 0.52–3.20 mA/cm{sup 2}, V{sub oc}:187–323 mV, FF: 0.27–0.48 were obtained. - Abstract: In this work, we report preparation and characterization of CuSbS{sub 2} thin films by heating glass/Sb{sub 2}S{sub 3}/Cu layers and their use as absorber material in photovoltaic structures: glass/SnO{sub 2}:F/n-CdS/p-CuSbS{sub 2}/C/Ag. The Sb{sub 2}S{sub 3} thin films of 600 nm were prepared by chemical bath deposition on which copper thin films of 50 nm were thermally evaporated, and the glass/Sb{sub 2}S{sub 3}/Cu multilayers were heated in vacuum at different temperatures. X-ray diffraction analysis showed the formation of orthorhombic CuSbS{sub 2} after heating the precursor layers. Studies on identification and chemical state of the elements were done using X-ray photoelectron spectroscopy. The optical band gap of the CuSbS{sub 2} thin films was 1.55 eV and the thin films were photoconductive. The photovoltaic parameters of the devices using CuSbS{sub 2} as absorber and CdS as window layer were evaluated from the J–V curves, yielding J{sub sc}, V{sub oc}, and FF values in the range of 0.52–3.20 mA/cm{sup 2}, 187–323 mV, and 0.27–0.48, respectively, under illumination of AM1.5 radiation.

36 MATERIALS SCIENCE↗

Thickness and UV irradiation effects on the gas sensing properties of Te thin films

Highlights: • Tellurium thin films were prepared by thermal evaporation technique. • Tellurium thin films showed excellent gas-sensing properties to H{sub 2}S at room temperature. • Tellurium showed a remarkably enhanced response to H{sub 2}S gas under UV irradiation. • The reason of the enhanced response by UV irradiation was discussed. - Abstract: In this research, tellurium thin films were investigated for use as hydrogen sulfide gas sensors. To this end, a tellurium thin film has been deposited on Al{sub 2}O{sub 3} substrates by thermal evaporation, and the influence of thickness on the sensitivity of the tellurium thin film for measuring H{sub 2}S gas is studied. XRD patterns indicate that as the thickness increases, the crystallization improves. Observing the images obtained by SEM, it is seen that the grain size increases as the thickness increases. Studying the effect of thickness on H{sub 2}S gas measurement, it became obvious that as the thickness increases, the sensitivity decreases and the response and recovery times increase. To improve the response and recovery times of the tellurium thin film for measuring H{sub 2}S gas, the influence of UV radiation while measuring H{sub 2}S gas was also investigated. The results indicate that the response and recovery times strongly decrease using UV radiation.

36 MATERIALS SCIENCE↗

High energy-storage performance of 0.9Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.1PbTiO{sub 3} relaxor ferroelectric thin films prepared by RF magnetron sputtering

Highlights: • High-quality PMN-PT 90/10 RFE thin films were prepared by RF magnetron sputtering. • The maximum discharged density of 31.3 J/cm{sup 3} was obtained in the 750-nm-thick film. • PMN-PT RFE films might be a promising material for energy-storage application. - Abstract: 0.9Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.1PbTiO{sub 3} (PMN-PT 90/10) relaxor ferroelectric thin films with different thicknesses were deposited on the LaNiO{sub 3}/Si (100) by the radio-frequency (RF) magnetron sputtering technique. The effects of thickness and deposition temperature on the microstructure, dielectric properties and the energy-storage performance of the thin films were investigated in detail. X-ray diffraction spectra indicated that the thin films had crystallized into a pure perovskite phase with a (100)-preferred orientation after annealed at 700 °C. Moreover, all the PMN-PT 90/10 thin films showed the uniform and crack-free surface microstructure. As a result, a larger recoverable energy density of 31.3 J/cm{sup 3} was achieved in the 750-nm-thick film under 2640 kV/cm at room temperature. Thus, PMN-PT 90/10 relaxor thin films are the promising candidate for energy-storage capacitor application.

36 MATERIALS SCIENCE↗

Tunable structural, morphological and optical properties of undoped, Mn, Ni and Ag-doped CuInS 2 thin films prepared by AACVD

The preparation of high-quality copper indium sulphide, CuInS 2 photo-absorber material with tunable properties for efficient, low-cost, thin film solar cells using scalable methods remains a challenge. In order to address this, high quality off-stoichiometric undoped and Mn, Ni and Ag-doped CuInS 2 (CIS) thin films have been deposited onto glass substrates by aerosol-assisted chemical vapour deposition (AACVD) using metal diethyldithiocarbamate precursors at temperatures of 350, 400 and 450 °C. Data from powder X-ray diffraction (p-XRD), Raman spectroscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) suggest a correlation of morphology and composition of tetragonal phase (chalcopyrite and copper-gold-type) sulphur-deficient microcrystalline CIS thin films. For undoped thin films, near-infrared optical absorption and emission with tunable band gap between 1.32 and 1.42 eV are likely associated with donor-acceptor pairs involving deep or shallow electronic states such as sulphur vacancies (V S •• ), indium-copper anti-sites (In Cu •• ) and indium interstitials (In i ••• ) as donors and copper vacancies (V Cu ') as acceptors. Whilst Mn-doped thin films exhibit minimal tunable properties, Ni and Ag-doped films exhibit tunable morphology, composition and near-infrared absorption for small dopant content. Here, though further studies are required to explore the defect chemistry, these results show the utility of AACVD in tuning structural, morphological and optical properties of undoped, Mn, Ni and Ag-doped CIS thin films.

36 MATERIALS SCIENCE↗

Autophagy induction by silver nanowires: A new aspect in the biocompatibility assessment of nanocomposite thin films

Nanomaterials and their enabled products have increasingly been attracting global attention due to their unique physicochemical properties. Among these emerging products, silver nanowire (AgNW)-based thin films are being developed for their promising applications in next generation nanoelectronics and nanodevices. However, serious concerns remain about possible health and safety risks they may pose. Here, we employed a multi-modal systematic biocompatibility assessment of thin films incorporating AgNW. To represent the possible routes of nanomaterial entry during occupational or environmental exposure, we employed four different cell lines of epithelial, endothelial, gastric, and phagocytic origin. Utilizing a cell-based automated image acquisition and analysis procedure in combination with real-time impedance sensing, we observed a low level of cytotoxicity of AgNW, which was dependent on cell type, nanowire lengths, doses and incubation times. Similarly, no major cytotoxic effects were induced by AgNW-containing thin films, as detected by conventional cell viability and imaging assays. However, transmission electron microscopy and Western immunoblotting analysis revealed AgNW-induced autophasosome accumulation together with an upregulation of the autophagy marker protein LC3. Autophagy represents a crucial mechanism in maintaining cellular homeostasis, and our data for the first time demonstrate triggering of such mechanism by AgNW in human phagocytic cells. Finally, atomic force microscopy revealed significant changes in the topology of cells attaching and growing on these films as substrates. Our findings thus emphasize the necessity of comprehensive biohazard assessment of nanomaterials in modern applications and devices and a thorough analysis of risks associated with their possible contact with humans through occupational or environmental exposure. Highlights: ► Thin films containing nanomaterials are subject to increasing contact with humans. ► This study provides multi-modal biohazard assessment of AgNW-based thin films. ► Thin films containing AgNW affect human cell topology and attachment. ► AgNW toxicity depends on cell type, nanowire length, dose, and exposure time. ► AgNW can induce the process of autophagy in phagocytic cells.

60 APPLIED LIFE SCIENCES↗

In Situ Growth and Interlayer Modulation of Layered Double Hydroxide Thin Films from a Transparent Conducting Oxide Precursor

Layered double hydroxides (LDHs) are a class of cationic-layered solids that can be synthetically designed for a variety of advanced functions. Facile thin film growth of LDHs is an important requisite for a variety of applications including functional coatings, displays, and sensing. In this work we demonstrate, for the first time, an in-situ and patternable thin film synthesis of interconnected Zn-Cr LDH particles from a transparent conducting oxide (TCO) precursor, aluminum-doped zinc oxide (AZO), at room temperature within minutes. Synthetic parameters such as chromium (III) nitrate concentration, solvent composition, and reaction time were found to significantly affect the thickness and morphology of the resulting LDH films. These LDH thin films can undergo interlayer anion exchange, which modulates the interlayer distance of the LDH sheets and surface energy of the thin film. Replacement of the interlayer anion with perfluorooctanoate increases the interlayer sheet distance from 0.9 nm to 2.8 nm and induces a super-hydrophobic thin film that is capable of adsolubilizing and retaining organic guest molecules. The synthetic method and structural analysis of the LDH thin films introduced in this work opens new avenues of application for LDH films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dispersity-Driven Stabilization of Coexisting Morphologies in Asymmetric Diblock Copolymer Thin Films

Despite decades of research, characterization of the effects of polymer chain dispersity on the structural properties of block copolymer thin films remains challenging. Here we present an integrated experimental and modeling approach to characterize the morphology of thin films containing asymmetric diblock copolymers. Specifically, we used synergistic neutron reflectivity (NR) and self-consistent field theory (SCFT)-based modeling to realize unexpected morphology of thin films containing asymmetric copolymers. Using NR, a highly stable and reproducible mixed phase of coexisting cylinders and lamellar domains was discovered in asymmetric poly(deuterated-styrene-b-n butyl methacrylate) (dPS-PBMA) copolymer thin films containing 34% volume fraction of dPS. SCFT reveals how to obtain such a thermodynamically stable morphology in the presence of disperse majority block and asymmetric interactions of polymer species with surfaces. Stabilization of the coexisting domains is a consequence of the depth segregation based on chain-length distribution. The asymmetric chains microphase-separate into cylindrical domains close to the substrate and near-symmetric chains form lamellar domains at the air interface. In the absence of dispersity, the coexistence of cylindrical and lamellar domains is thermodynamically unstable because of the absence of depth segregation. Overall, such an effect of dispersity on diblock copolymer thin-film morphology reveals a unique and powerful strategy to create coexisting nanoscale domains and tailor properties of thin films.

36 MATERIALS SCIENCE↗

Role of solution structure in self-assembly of conjugated block copolymer thin films

Conjugated block copolymers provide a pathway to achieve thermally stable nanostructured thin films for organic solar cells. We characterized the structural evolution of poly(3-hexylthiophene)- block -poly(diketopyrrolopyrrole–terthiophene) (P3HT- b -DPPT-T) from solution to nanostructured thin films. Aggregation of the DPPT-T block of P3HT- b -DPPT-T was found in solution by small-angle X-ray scattering with the P3HT block remaining well-solvated. The nanostructure in thin films was determined using a combination of wide and small-angle X-ray scattering techniques as a function of processing conditions. The structure in solution controlled the initial nanostructure in spin-cast thin films, allowing subsequent thermal annealing processes to further improve the ordering. In contrast to the results for thin films, nanostructural ordering was not observed in the bulk samples by small-angle X-ray scattering. Finally, these results suggest the importance of controlling solvent induced aggregation in forming nanostructured thin films of conjugated block copolymers.

14 SOLAR ENERGY↗

Rapid Stoichiometry Control in Cu 2 Se Thin Films for Room-Temperature Power Factor Improvement

Cu 2 Se thin films provide a promising route toward relatively safe, sustainable and solution processed thermoelectric (TE) modules in contrast to more expensive and toxic materials currently on the market such as Bi2Te3. Cu 2 Se is known in the TE community for its high performance at high temperature and has recently attracted attention from its large theoretically predicted figure of merit at room temperature. Unfortunately, one of the main limitations encountered so far in Cu 2 Se thin films is that the carrier concentrations are not optimized for TE operation after solution processing. In this work, we conduct a comprehensive study of the structural, optical, and TE properties of Cu 2 Se thin films and demonstrate that nonoptimized carrier concentrations in these films lead to observations of poor performance at room temperature. Through a simple soaking procedure in a Cu+ ion solution for only a few minutes, we demonstrate a 200-300% increase in power factor. This soaking process pushes the carrier concentration of the Cu 2 Se thin film toward its optimal value for TE operation and marks the highest TE performance for any solution processed Cu 2 Se thin film at room temperature thus far. If the performance can be further optimized at room temperature, Cu 2 Se thin films will be the material of choice to utilize in TE modules for powering miniature electronics and sensors, which has been an increasingly popular and rapidly expanding market.

36 MATERIALS SCIENCE↗

Emergence of Rapid Oxygen Surface Exchange Kinetics during in Situ Crystallization of Mixed Conducting Thin Film Oxides

The oxygen surface exchange kinetics of mixed ionic and electronic conducting oxides (MIECs) play a vital role in the efficiency of intermediate-to-high-temperature electrochemical devices. While there is increasing interest in low-temperature preparation of MIEC thin films, the impact of the resultant varied degrees of crystallinity on the surface exchange kinetics has not been widely investigated. Herein, we probe the effect of crystallization on oxygen surface exchange kinetics in situ, by applying an optical transmission relaxation (OTR) approach during annealing of amorphous films. OTR enables contact-free, in situ, and continuous quantification of the oxygen surface exchange coefficient ( k chem ); we previously applied it to Pr x Ce 1– x O 2-δ and SrTi 1– x Fe x O 3-δ thin films. In this work, the OTR approach was successfully extended to other mixed conducting thin film compositions for the first time (i.e., perovskite SrTi 0.65 Co 0.35 O 3-δ and Ruddlesden–Popper Sr 2 Ti 0.65 Fe 0.35 O 4±δ ), as well as to Pr 0.1 Ce 0.9 O 2-δ , enabling quantification of the k chem of their native surfaces and comparison of the behavior of films with different final crystal structures. All thin films were prepared by pulsed laser deposition at 25 or 700–800 °C and subject to subsequent thermal treatments with simultaneous OTR monitoring of k chem . The surface roughness, grain size, and crystallinity were evaluated by scanning probe microscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Fluorite Pr 0.1 Ce 0.9 O 2-δ films grown at 25 °C did not exhibit an increase in k chem after annealing, as they were already crystalline as grown at 25 °C. For all other compositions, OTR enabled in situ observation of both the crystallization process and the emergence of rapid surface exchange kinetics immediately upon crystallization. Perovskite SrTi 0.65 Co 0.35 O 3-δ and Ruddlesden–Popper Sr 2 Ti 0.65 Fe 0.35 O 4±δ thin films grown at 25 °C exhibited at least 1–2 orders of magnitude enhanced k chem after annealing compared with highly crystalline thin films grown at 800 °C, indicating the benefits of in situ crystallization.

36 MATERIALS SCIENCE↗

Pathways to Mesoporous Resin/Carbon Thin Films with Alternating Gyroid Morphology

Here, three-dimensional (3D) mesoporous thin films with sub-100 nm periodic lattices are of increasing interest as templates for a number of nanotechnology applications, yet are hard to achieve with conventional top-down fabrication methods. Block copolymer self-assembly derived mesoscale structures provide a toolbox for such 3D template formation. In this work, single (alternating) gyroidal and double gyroidal mesoporous thin-film structures are achieved via solvent vapor annealing assisted co-assembly of poly(isoprene- block -styrene- block -ethylene oxide) (PI- b -PS- b -PEO, ISO) and resorcinol/phenol formaldehyde resols. In particular, the alternating gyroid thin-film morphology is highly desirable for potential template backfilling processes as a result of the large pore volume fraction. In situ grazing-incidence small-angle X-ray scattering during solvent annealing is employed as a tool to elucidate and navigate the pathway complexity of the structure formation processes. The resulting network structures are resistant to high temperatures provided an inert atmosphere. The thin films have tunable hydrophilicity from pyrolysis at different temperatures, while pore sizes can be tailored by varying ISO molar mass. A transfer technique between substrates is demonstrated for alternating gyroidal mesoporous thin films, circumventing the need to re-optimize film formation protocols for different substrates. Increased conductivity after pyrolysis at high temperatures demonstrates that these gyroidal mesoporous resin/carbon thin films have potential as functional 3D templates for a number of nanomaterials applications.

3D templates↗

Tunable Semiconducting Behavior and Linear-Nonlinear Optical Properties of Ag–Sn Dual-Doped Nanocrystalline CdO Thin Films for Optoelectronics

Semiconductor-based thin films have a great impact on determining the anticipated optoelectronic device construction and the advancement of cutting-edge applications. Herein, Ag and Sn dual-doped nanocrystalline transparent conducting CdO thin films were prepared on glass substrates using a cost-effective spray coating method, and their structural, morphological, optical, and semiconducting behaviors were investigated. The successful incorporation of Ag and Sn resulted in the polycrystalline nature of the deposited films without the additional peaks, as verified by X-ray diffraction (XRD) analysis. The XRD report also revealed the enhanced crystallinity (65%) at the higher doping level (3 wt % Ag and Sn-doped CdO film). All the deposited CdO films exhibited homogeneous, spherical, or round-shaped grains, with agglomeration revealed by scanning electron microscopy analysis. UV–visible spectroscopy was utilized to determine the linear and nonlinear optical properties of the deposited CdO thin films, and a reduction in the band gap from 3.891 to 3.772 eV was observed. A significant enhancement in the first- and third-order nonlinear susceptibility and nonlinear refractive index of the doped CdO films was also observed with increasing doping concentration. Hall effect data were collected at room temperature to investigate the electrical properties of all of the CdO films. The charge carrier concentration of CdO thin films was increased from 142.08 × 10 18 to 169.10 × 10 18 cm –3 , and the highest conductivity was found to be 192 s/cm on doping 3 wt % Ag–Sn. All the CdO thin films exhibited n-type conductivity, while an incredible n-type to p-type charge carrier transition was noticed at a higher doping level (3 wt % Ag–Sn). The findings of the current work are expected to advance the synthesis of semiconductor thin films through cost-effective spray coating methods for optoelectronic device applications.

deposition↗