Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermally conductive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Numerical investigation of fluid models with full electron and proton thermal conduction equations for the quiet solar wind

The effect of using full equations (rather than Fourier law expressions) for the electron and proton thermal conductivities in conjunction with community, momentum, and temperature equations for the description of spherically symmetric quiet solar wind states is investigated numerically. For this purpose a time-dependent method is used, and steady state solutions in both subsonic and supersonic regimes between the sun and 5 AU are obtained and presented. The consequences for one-fluid and two-fluid models for the solar wind are summarized and discussed.

Cuperman, S.↗

Numerical study of 1-D, 3-vector component, thermally-conductive MHD solar wind

In the present study, transient, 1-dimensional, 3-vector component MHD equations are used to simulate steady and unsteady, thermally conductive MHD solar wind expansions between the solar surface and 1 AU (astronomical unit). A variant of SIMPLE numerical method was used to integrate the equations. Steady state solar wind properties exhibit qualitatively similar behavior with the known Weber-Davies Solutions. Generation of Alfven shock, in addition to the slow and fast MHD shocks, was attempted by the boundary perturbations at the solar surface. Property changes through the disturbance were positively correlated with the fast and slow MHD shocks. Alfven shock was, however, not present in the present simulations.

Han, S.↗

Lattice Thermal Conductivity of Ultra High Temperature Ceramics ZrB2 and HfB2 from Atomistic Simulations

Atomistic Green-Kubo simulations are performed to evaluate the lattice thermal conductivity for single crystals of the ultra high temperature ceramics ZrB2 and HfB2 for a range of temperatures. Recently developed interatomic potentials are used for these simulations. Heat current correlation functions show rapid oscillations which can be identified with mixed metal-Boron optical phonon modes. Agreement with available experimental data is good.

Lawson, John W.↗

Theoretical upper limits of the thermal conductivity of Si3N4

Silicon nitride (Si3N4) is a promising substrate for high-power electronics due to its superior mechanical properties and potential outstanding thermal conductivity (κ). As experiments keep pushing the upper limit of κ of Si3N4, it is believed that it can reach 450 W/mK, similar to SiC, based on classical models and molecular dynamics simulations. In this work, we reveal from first principles that the theoretical κ upper limits of β-Si3N4 are only 169 and 57 W/mK along the c and a axes at room temperature, respectively. Those of α-Si3N4 are about 116 and 87 W/mK, respectively. The predicted temperature-dependent κ matches well with the highest available experimental data, which supports the accuracy of our calculations, and suggests that the κ upper limit of Si3N4 has already been reached in the experiment. Compared to other promising semiconductors (e.g., SiC, AlN, and GaN), Si3N4 has a much lower κ than expected even though the chemical bonding and mechanical strengths are close or even stronger. We find the underlying reason is that Si3N4 has much lower phonon lifetimes and mean free paths (<0.5 μm) due to the larger three-phonon scattering phase space and stronger anharmonicity. Interestingly, we find that the larger unit cell (with more basis atoms) that leads to a smaller fraction of acoustic phonons is not the reason for lower κ. Grain size-dependent κ indicates that the grain boundary scattering plays a negligible role in most experimental samples. This work clarifies the theoretical κ upper limits of Si3N4 and can guide experimental research.

Physics↗

The structure of shocks with thermal conduction and radiative cooling

A general analysis is presented of the structure of a steady state, plane-parallel shock wave in which both thermal conduction and radiative cooling are important. The fluid is assumed to have a perfect-gas equation of state, with radiative cooling a function only of its temperature and density. Conduction in both diffusive and saturated regimes is treated. For the case of a strong shock, with conductivity and cooling function varying as power laws in temperature, approximate analytic solutions describing the shock wave are derived. For a plasma of solar composition, conduction is found to have a significant effect on the shock temperature and overall thickness of the postshock layer only for shock velocities greater than about 30,000 km/s, corresponding to shock temperatures greater than about 10 to the 10th K, but it affects the local structure of parts of the shock wave at much lower velocities. The effects of conduction are greatly enhanced if the heavy-element abundance is increased.

Lacey, Cedric G.↗

Cryogenic Thermal Conductance Measurements of Candidate Materials and Components for WFIRST

Wide Field Infrared Survey Telescope (WFIRST) is the next generation astrophysics flagship mission. The primary mission goal is to probe the expansion history of the Universe and the growth of cosmic structure. The wide field instrument has an operating temperature of 90K. We measured the thermal conductance of several candidate materials and components for thermal subsystem of the instrument at cryogenic temperatures. This paper describes these measurements and presents the results.

Li, Xiaoyi↗

Scale-invariant machine-learning model accelerates the discovery of quaternary chalcogenides with ultralow lattice thermal conductivity

We design an advanced machine-learning (ML) model based on crystal graph convolutional neural network that is insensitive to volumes (i.e., scale) of the input crystal structures to discover novel quaternary chalcogenides, AMM'Q 3 (A/M/M' = alkali, alkaline earth, post-transition metals, lanthanides, and Q = chalcogens). These compounds are shown to possess ultralow lattice thermal conductivity (κ l ), a desired requirement for thermal-barrier coatings and thermoelectrics. Upon screening the thermodynamic stability of ~1 million compounds using the ML model iteratively and performing density-functional theory (DFT) calculations for a small fraction of compounds, we discover 99 compounds that are validated to be stable in DFT. Taking several DFT-stable compounds, we calculate their κ l using Peierls–Boltzmann transport equation, which reveals ultralow κ l (<2 Wm -1 K -1 at room temperature) due to their soft elasticity and strong phonon anharmonicity. Our work demonstrates the high efficiency of scale-invariant ML model in predicting novel compounds and presents experimental-research opportunities with these new compounds.

36 MATERIALS SCIENCE↗

Thermal conductivity, electrical conductivity and specific heat of copper-carbon fiber composite

We have developed a new copper-carbon fiber composite which possesses properties of copper, i.e., excellent thermal and electrical conductivities, in combination with a property of carbon fiber, i.e., a small thermal expansion coefficient. The composite properties can be controlled by the amount, type and orientation of the carbon fibers they contain. Therefore, this composite is considered to be useful as an electrical material. The effects of volume and arrangement of fibers on the thermal conductivity, electrical conductivity and specific heat of the composite were studied. The results obtained were as follows: (1) The thermal and electrical conductivities of the composite became smaller as the volume of carbon fibers increased, and they were also influenced by the fiber arrangement. (2) The above conductivities could be calculated by careful application of the “rule of mixtures” for composites. (3) The specific heat of the composite was dependent not on the fiber arrangement but on the fiber volume. (4) In thermal fatigue tests, no degradation in electrical conductivity was observed.

Keiichi Kuniya↗

Low thermal conductance rigidizer for reducing torsional oscillations in cryogenic Dewars

A rigidizer, which provides greater rigidity against torsional oscillations, is highly resistant to radial motions, and has low thermal conductivity, has been developed to decrease vibrational levels affecting infrared detectors operated in cryostats (e.g., HD-3L Dewar) in aircraft such as NASA's Kuiper Airborne Observatory. The rigidizer is composed of two triangular elements and an intermediate support structure which joins them at the centers of their sides. The reentrant design provides a long heat path, while the triangular truss structure provides high rigidity in the horizontal plane. The structure is relatively compliant in the vertical direction, a desirable feature since the internal structure of the Dewar contracts as it cools. Rigidity in the vertical direction is provided by the neck tube. The support structure is quite compact. Several variants of the rigidizer have been fabricated, using flat sheets of G-10 fiberglass epoxy in thicknesses between 0.75-1.5 mm for the upper and lower truss assemblies, and either G-10 or stainless steel for the intermediate structure.

Harper, D. A.↗

Thermal conductivity, electrical resistivity, and thermopower of aerospace alloys from 4 to 300 K. 6: Fe-22Cr-13Ni-5Mn stainless steel

The equipment and techniques for determining the thermal conductivity, electrical resistivity Lorenz ratio, and thermopower characteristics of Fe-22Cr-13Ni-5Mn stainless steel are discussed. The dimensions of the specimen and its preparation are described. The experimental data are represented by arbitrary functions over the entire range and smooth tables are generated from these functions.

Hust, J. G.↗

Wear-Resistant, Thermally Conductive Coating

Process makes coating with unusual properties. Coating is copper or copper alloy with controlled dispersion of oxide or carbide particles. Process results in coating that has thermal expansion similar to base material, increased resistance to abrasion when hot, and high thermal conductivity. Coatings resistant to wear used in variety of applications ranging from earth-moving equipment to space vehicles.

Edmonds, Brian J.↗

Vaporization response of evaporating drops with finite thermal conductivity

A numerical computing procedure was developed for calculating vaporization histories of evaporating drops in a combustor in which travelling transverse oscillations occurred. The liquid drop was assumed to have a finite thermal conductivity. The system of equations was solved by using a finite difference method programmed for solution on a high speed digital computer. Oscillations in the ratio of vaporization of an array of repetitivity injected drops in the combustor were obtained from summation of individual drop histories. A nonlinear in-phase frequency response factor for the entire vaporization process to oscillations in pressure was evaluated. A nonlinear out-of-phase response factor, in-phase and out-of-phase harmonic response factors, and a Princeton type 'n' and 'tau' were determined. The resulting data was correlated and is presented in graphical format. Qualitative agreement with the open literature is obtained in the behavior of the in-phase response factor. Quantitatively the results of the present finite conductivity spray analysis do not correlate with the results of a single drop model.

Agosta, V. D.↗

Thermal Conductivity Based on Modified Laser Flash Measurement

The laser flash method is a standard method for thermal diffusivity measurement. It employs single-pulse heating of one side of a thin specimen and measures the temperature response of the other side. The thermal diffusivity of the specimen can be obtained based on a one-dimensional transient heat transfer analysis. This paper reports the development of a theory that includes a transparent reference layer with known thermal property attached to the back of sample. With the inclusion of heat conduction from the sample to the reference layer in the theoretical analysis, the thermal conductivity and thermal diffusivity of sample can be extracted from the temperature response data. Furthermore, a procedure is established to select two points from the data to calculate these properties. The uncertainty analysis indicates that this method can be used with acceptable levels of uncertainty.

Lin, Bochuan↗

Thermal Response of Cooled Silicon Nitride Plate Due to Thermal Conductivity Effects Analyzed

Lightweight, strong, tough high-temperature materials are required to complement efficiency improvements for next-generation gas turbine engines that can operate with minimum cooling. Because of their low density, high-temperature strength, and high thermal conductivity, ceramics are being investigated as materials to replace the nickelbase superalloys that are currently used for engine hot-section components. Ceramic structures can withstand higher operating temperatures and a harsh combustion environment. In addition, their low densities relative to metals help reduce component mass (ref. 1). To complement the effectiveness of the ceramics and their applicability for turbine engine applications, a parametric study using the finite element method is being carried out. The NASA Glenn Research Center remains very active in conducting and supporting a variety of research activities related to ceramic matrix composites through both experimental and analytical efforts (ref. 1). The objectives of this work are to develop manufacturing technology, develop a thermal and environmental barrier coating (TBC/EBC), develop an analytical modeling capability to predict thermomechanical stresses, and perform a minimal burner rig test on silicon nitride (Si3N4) and SiC/SiC turbine nozzle vanes under simulated engine conditions. Moreover, we intend to generate a detailed database of the material s property characteristics and their effects on structural response. We expect to offer a wide range of data since the modeling will account for other variables, such as cooling channel geometry and spacing. Comprehensive analyses have begun on a plate specimen with Si3N4 cooling holes.

Baaklini, George Y.↗