Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technology validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Final Report on Aerosol Pretreatment Technology Performance and Benchmarking

Solvent-based post-combustion CO 2 capture (PCC) technology remains one of the leading methods to combat global CO 2 emissions produced from large-scale coal-fired power production. Advanced solventbased PCC technology has made significant improvements in design and performance that reduce capital and operating costs to enable its commercial use. Key to low cost, manageable logistics, and environmentally safe operation of solvent-based PCC technology are minimal solvent losses from the process through the treated gas stream exiting PCC plant absorbers. High flue gas aerosol particle concentrations (>10 5 particles/cm 3 ) for particles in the range of 70-200 nm have been shown to cause significant amine solvent losses for solvent-based PCC processes through several mechanisms including absorption of solvent and water into growing aerosol particles. Flue gas aerosol pretreatment technology is the only realistic and economically attractive method to reduce very high aerosol particle concentrations (>10 7 particles/cm 3 ) to enable solvent-based PCC for existing power plants lacking sufficient particle removal systems, such as baghouses. The overall goal of this project was to design, construct, independently test, and evaluate three flue gas aerosol pretreatment technologies identified to significantly reduce high aerosol particle concentrations (>10 7 particles/cm 3 ) in the 70-200 nm particle size range: (1) a novel, high-velocity water injection spray concept developed by RWE and tested by Linde, (2) an innovative electrostatic precipitator (ESP) device with optimized operating conditions developed by Washington University in St. Louis (WUSTL), and (3) a non-regenerative sorbent-based filter technology developed by InnoSepra for SO x and NO x removal from coal-fired power plant flue gas. Each technology has been validated with tests on 500-1000 scfm of actual coal-fired flue gas and evaluated in terms of particle removal efficiency (%), cost competitiveness, and environmental impact. Aerosol measurements were performed upstream and downstream of each aerosol reduction unit during independent testing of each technology using advanced instrumentation and analytical methods provided by WUSTL. To perform aerosol measurements, isokinetic probes were inserted into flanged pipes attached to the flue gas piping, and a small suction pump was used to sample gas containing aerosol particles. Aerosol particle number concentrations (# particles/cm 3 ) and size distributions were then measured using a scanning mobility particle sizer (SMPS, TSI Inc.) for very fine particles (<1,000 nm) and a particle counter manufactured by GRIMM for particles larger than 1,000 nm. This report summarizes the aerosol removal performance results from pilot scale testing of each technology. Performance results have been benchmarked against pre-defined targets and other flue gas aerosol pretreatment technologies with documented performance. Linde Gas North America LLC has been the prime contractor to DOE responsible for overall project management and provided the design for the high-velocity water spray-based aerosol removal technology based on a design concept developed by the German utility company RWE.

20 FOSSIL-FUELED POWER PLANTS↗

Cryogenic Propellant Storage and Transfer Technology Demonstration For Long Duration In-Space Missions

The high specific impulse of cryogenic propellants can provide a significant performance advantage for in-space transfer vehicles. The upper stages of the Saturn V and various commercial expendable launch vehicles have used liquid oxygen and liquid hydrogen propellants; however, the application of cryogenic propellants has been limited to relatively short duration missions due to the propensity of cryogens to absorb environmental heat resulting in fluid losses. Utilizing advanced cryogenic propellant technologies can enable the efficient use of high performance propellants for long duration missions. Crewed mission architectures for beyond low Earth orbit exploration can significantly benefit from this capability by developing realistic launch spacing for multiple launch missions, by prepositioning stages and by staging propellants at an in-space depot. The National Aeronautics and Space Administration through the Office of the Chief Technologist is formulating a Cryogenic Propellant Storage and Transfer Technology Demonstration Mission to mitigate the technical and programmatic risks of infusing these advanced technologies into the development of future cryogenic propellant stages or in-space propellant depots. NASA is seeking an innovative path for human space exploration, which strengthens the capability to extend human and robotic presence throughout the solar system. This mission will test and validate key cryogenic technological capabilities and has the objectives of demonstrating advanced thermal control technologies to minimize propellant loss during loiter, demonstrating robust operation in a microgravity environment, and demonstrating efficient propellant transfer on orbit. The status of the demonstration mission concept development, technology demonstration planning and technology maturation activities in preparation for flight system development are described.

Meyer, Michael L.↗

New Industry Partnerships: Solar Energy Technologies Office Support for Early Projects in the Energy Systems Integration Facility: An Agreement Closeout Summary Report

The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Solar Energy Technologies Office (SETO)-funded New Industry Partnerships (NIPs) agreement established multiple new cooperative research projects with industry partners. Each project demonstrated the use of the National Renewable Energy Laboratory's Energy Systems Integration Facility (ESIF) as a national asset for research and development, testing, and validation of new technologies to support high penetrations of solar energy on the electric grid. The agreement was launched in 2013 and represented the SETO portion of the DOE EERE-wide Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) program. The focus of INTEGRATE was on multi-energy system testing and on testing the interactions of energy systems with information technology, communications, and telecommunications (ICT) systems. The NIPs agreement was a bit different from traditional research projects because it was specifically structured to enable partnerships for ESIF testing and as such required at least a 1:1 funds-in cost share from industry partners. In the end, the project engaged six different industry partnerships and resulted in testing a large number of innovative technologies. These included tiny inverters; power-to-gas technologies; and advanced simulation, analysis, and power-hardware-in-the-loop testing techniques. The agreement also provided significant impact for both research and industrial communities. This summary report provides a brief, high-level overview of these projects and their highlights along with lists of citations and other impacts. Readers are referred to the corresponding project reports for more in-depth information.

14 SOLAR ENERGY↗

Abstract for CRADA between National Energy Technology Laboratory and Colonial Pipeline Company

The National Energy Technology Laboratory (NETL) and Colonial Pipeline Company (Participant) will collaborate in the field demonstration of optical fiber sensor systems developed at NETL on Participant’s fuel pipeline. The optical fiber sensor technologies are capable of distributed temperature and strain sensing, distributed acoustic sensing, and ultrasensitive acoustic sensing. Real-time monitoring of these parameters enables pipeline integrity monitoring, security monitoring, flow rate monitoring, etc. Successful demonstration on a real fuel pipeline at Participant’s facilities will validate the sensor technologies and installation methods at a real scale. This effort aligns with NETL’s mission in reliable and sustainable energy and reducing environmental effects due to pipeline failures.

42 ENGINEERING↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Ampere Scientific [Abstract]

Electro-Slag-Remelting (ESR) is an industry standard process used to manufacture alloys for mission critical components associated with energy, aerospace, defense, and other applications. For example, ESR is specifically used in the production and refinement of Nickel (Ni)-alloys such as IN 740H used for critical turbine applications. The aim of this CRADA is to develop and validate a sensor technology to monitor the melting of ingots during the ESR. The sensor will allow for feedback on the melting operation, allowing the operator to make adjustment on the fly and produce better ingots. Further, through better control, operators can more efficiently produce ingots by ESR.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Scale-up Testing of Advanced Polaris Membrane in CO2 Capture Technology

This final technical report describes work conducted by Membrane Technology and Research, Inc. (MTR) for the U.S. Department of Energy (DOE), National Energy Technology Lab (NETL) on the scale-up and testing of advanced Polaris™ membrane CO2 capture technology at the Technology Centre Mongstad (TCM) under award number DE-FE0031591. The work was performed from August 1, 2018 through January 31, 2023. The overall goal of this project was to design, build and operate an advanced Polaris membrane CO2 capture system at TCM. MTR was assisted in this project by Trimeric Corporation (Trimeric), an engineering design services company, the Carbon Capture Simulation for Industry Impact (CCSI2), a partnership among national laboratories, industry, and academic institutions, and the Technology Centre Mongstad (TCM), who provided the host site for the slipstream field test. This report details the work conducted to scale-up MTR’s second-generation (Gen-2) Polaris membrane and advanced planar membrane modules to a final form factor optimized for commercial use; validate their performance in an engineering-scale field test at TCM; and to show the potential of the MTR process to meet DOE CO2 capture targets from large source point emitters. Work for this project included membrane optimization and scale-up, advanced planar module design and fabrication, design and fabrication of an engineering-scale field test membrane skid, operation of the field test skid processing Residue Fluid Catalytic Cracker (RFCC) industrial flue gas at TCM, and a detailed techno-economic analysis (TEA) of the MTR membrane post-combustion process for CO2 capture. This project validated recent membrane technology advancements at the engineering-scale, moves the MTR advanced post-combustion capture technology to TRL-6, and mitigates risk in future Large Pilot or Demonstration scale-up activities.

20 FOSSIL-FUELED POWER PLANTS↗

Overview of NASA's Break the Ice Lunar Challenge

This paper provides the background, status and ongoing plans by NASA’s CentennialChallenges Program (CCP) in developing “Break the Ice Lunar Challenge”. This challenge will enable the development of excavation technologies that can operate in the extreme conditions on the Moon. As a direct result of NASA’s Space Policy Directive 1 (To the Moon, then Mars”), CCP organized a kickoff meeting in October 2019 where Subject Matter Experts (SME) from various NASA centers got together and identified the technology gaps in the areas of Lunar Excavation, Manufacturing, and Construction. Following the kickoff meeting, CCP in partnership with external challenge consultants conducted in-depth interviews with experts from academia, industry, and NASA over a period of two months to further identify any technology gaps and the status of the current state of the art technologies in these areas. Through these activities, we determined that there is sufficient need and opportunity to move forward and develop this into a robust challenge. As a nextstep, CCP organized a workshop in February 2020 where experts from academia, industry, NASA, and other government agencies met to validate the specific technology need and prioritize those needs in such a way that the potential challenge can address the high priority needs. Since the completion of this workshop, a core challenge development team has been working on the challenge scenarios, rules, and requirements with the goal to open the challenge in Nov 2020.

Centennnial Challenges↗

DimaSense™: A Novel Nucleic Acid Detection System

Recently, we developed a suite of methods for the rational design and fabrication of well-defined nanoparticle architectures, including clusters using bio-encoded nanoscale building blocks and layer-by-layer stepwise assembly on a solid support. In particular, the Nano-Assembly platform using Encoded Solid Supports (NAESS) allows for controlled interactions, purification of side products, modularity of design, and the construction of complex nanoparticle architectures. This approach offers several advantages over the current art of designing nanoparticle clusters, which include the high-yield synthesis of desired architectures, a 'plug-and-play' design allowing for the introduction of a variety of sensing modalities, and ease of scalability in high-throughput and synthesis yield. As a utility proof of concept, we implemented our unique cluster fabrication platform to design gold nanoparticle dimers which are linked via a single-stranded DNA oligonucleotide recognition motif. The design of this motif is such that binding of complementary nucleic acids results in specific, selective and rapid dimer dissociation, which can be monitored by dynamic light scattering (DLS). We demonstrated single level mismatch selectivity using this approach. The limit of detection was determined to be 1011 molecules of synthetic target RNA or DNA within 30 minutes of incubation at 33 C. This detection limit is determined by the dimer's concentration which can be probed by currently used standard DLS instruments. We also demonstrated a specific detection of target RNA in a solution containing competing 1,000-fold excess of non-complementary DNA fragments, 10% BSA, and endonucleases. Molecular diagnostic companies, RNA-based technology developers, and personalized medicine companies have applications that could benefit from using DimaSense{trademark}. The technology represents a platform which enables the simple and reasonably inexpensive design and fabrication of highly selective genetic sensors. These sensors operate with very low concentrations of target, can utilize standard instrumentation, produce detection results rapidly, and are robust enough to function in the presence of many competing genetic targets. Many current genetic target detection products/approaches/technologies rely upon methods (such as qPCR) which are more complicated, cumbersome, and costly to perform, and are not well suited to point-of-care diagnostic applications. Several clinical diagnostic applications, particularly point-of-care (POC) diagnostics for infectious diseases, are possible and appear to be a good fit for the technology. In addition, the advent of personalized medicine will create opportunities for molecular diagnostic companies with the capabilities of rapidly and quantitatively detecting nucleic acid sequences. The global POC market was {approx}$7.7B in 2010, with a recent annual growth rate of {approx}7%. A specific disease or disease-class diagnostic would need to be identified before a more meaningful sub-market value could be stated. Additional validation of the technology to show that it displays appropriate performance parameters for a commercial application on 'real world' samples is required for true commercial readiness. In addition, optimization of sensor design parameters, to effect a 10-fold increase in sensitivity, may be required to produce a commercially ready sensor system. These validation and sensor design optimization are estimated to require 3-4 months and {approx}$75k. For an unregulated product to give this sensor system a distinct competitive advantage, 2-3 years of product development and $1.5-3M are likely required. For regulated markets, time to market (through clinic) and cost would depend upon the product.

59 BASIC BIOLOGICAL SCIENCES↗

Turbine Internal and Film Cooling Modeling For 3D Navier-Stokes Codes

The aim of this research project is to make use of NASA Glenn on-site computational facilities in order to develop, validate and apply aerodynamic, heat transfer, and turbine cooling models for use in advanced 3D Navier-Stokes Computational Fluid Dynamics (CFD) codes such as the Glenn-" code. Specific areas of effort include: Application of the Glenn-HT code to specific configurations made available under Turbine Based Combined Cycle (TBCC), and Ultra Efficient Engine Technology (UEET) projects. Validating the use of a multi-block code for the time accurate computation of the detailed flow and heat transfer of cooled turbine airfoils. The goal of the current research is to improve the predictive ability of the Glenn-HT code. This will enable one to design more efficient turbine components for both aviation and power generation. The models will be tested against specific configurations provided by NASA Glenn.

DeWitt, Kenneth↗

The Evolution of the VASIMR Engine

Our future deep space explorers face many daunting challenges but three of these loom high above the rest: Physiological debilitation, radiation sickness and psychological stress. Many countermeasures are presently being considered to ameliorate these difficulties however, in the long run, two important new developments are required: abundant space power and advanced propulsion. The development of the Variable Specific Impulse Magnetoplasma Rocket (VASIMR) addresses these important areas of need. The VASIMR is a high power, radio frequency-driven magneto plasma rocket, capable of very high exhaust velocities. In addition, its unique architecture allows in-flight mission-optimization of thrust and specific impulse to enhance performance and reduce trip time. A NASA-led, research team, involving industry, academia and government facilities is pursuing the development of this concept in the United States. The technology can be validated, in the near term, in venues such as the International Space Station, where it can also serve as both a drag compensation device and a plasma contactor for the orbital facility. Other near-Earth applications in the commercial and scientific satellite sectors are also envisioned. This presentation covers the present status of the technology, plans for its near term deployment and a vision for its future evolution.

Chang-Diaz, F. R.↗

Abstract for CRADA between NETL and Rivalia Chemical Co

The National Energy Technology Laboratory (NETL) will assist Rivalia Chemical Co (Participant) with system analyses to aid the Participant with setting priorities and securing funding. The Participant is an early-stage startup pioneering new chemical extraction technology to solve two important problems: critical mineral scarcity and coal ash waste management. The U.S. generates coal fly ash from coal combustion for power generation and has amassed over two billion metric tons of ash, which contains valuable rare earth elements. The ash is often stored in unlined ponds and frequently contaminates the local environment. The Participant’s patent-pending process harvests rare earths from ash, then transforms the residual ash for use in green concrete, providing an economic pathway for utilities to empty and remediate the ash ponds. Founder Laura Stoy created the company in July 2022 after developing the core intellectual property during her Ph.D. at the Georgia Institute of Technology. Stoy is currently participating in the Chain Reactions Innovations (CRI) program at the U.S. Department of Energy (DOE) Argonne National Laboratory (ANL) where she will be optimizing the core technology and scaling from bench scale to demonstration scale. The technology has been validated at bench scale (TRL3); the goal is to approach TRL5 by the conclusion of the CRI program and prepare to raise capital investment for a pilot facility. NETL and the Participant will develop an updated technoeconomic analysis (TEA) and identify key sustainability performance parameters to inform ’s research and development priorities and de-risk the technology. NETL will also provide the Participant with guidance to prepare a more detailed life cycle assessment (LCA), and a narrative on the Participant’s product markets. These tools will aid the Participant with the next steps of commercialization.

01 COAL, LIGNITE, AND PEAT↗

High Contrast Imaging Testbed for the Terrestrial Planet Finder Coronagraph

The Terrestrial Planet Finder (TPF) mission is planning to launch a visible coronagraphic space telescope in 2014. To achieve TPF science goals, the coronagraph must have extreme levels of wavefront correction (less than 1 Angstrom rms over controllable spatial frequencies) and stability to get the necessary suppression of diffracted starlight (approximately l0(exp -10)) contrast at an angular separation approximately 4 (lamda)/D). TPF Coronagraph's primary platform for experimentation is the High Contrast Imaging Testbed, which will provide laboratory validation of key technologies as well as demonstration of a flight-traceable approach to implementation. Precision wavefront control in the testbed is provided by a high actuator density deformable mirror. Diffracted light control is achieved through use of occulting or apodizing masks and stops. Contrast measurements will establish the technical feasibility of TPF requirements, while model and error budget validation will demonstrate implementation viability. This paper describes the current testbed design, development approach, and recent experimental results.

coronagraph↗

Earth Science Technology Office (ESTO) New Observing Strategies (NOS) and NOS-Testbed (NOS-T)

With the advancement of space hardware technologies such as smaller spacecraft, component and instrument miniaturization and high performance space processors, and with the advancement of software technologies in artificial intelligence, big data analysis and autonomous decision making, Earth Science is looking at novel ways to observe phenomena that previously could not have been studied or would have been too expensive to study with traditional missions. In particular, the New Observing Strategies (NOS) component of the NASA Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST) Program aims at leveraging these novel technologies as well as low cost and easy access to space to acquire multi-temporal or simultaneous multi-angular, multi-locations, multi-resolution and multi-spectral observations that will provide better multi-source measurements and will build a more dynamic and comprehensive picture of Earth Science phenomena that need to be studied and analyzed. For applications such as water resources management, air quality monitoring, biodiversity studies or disaster management, NOS will integrate the use of small instruments, small spacecraft, constellations of spacecraft and networks of sensors to design new missions that will provide the necessary measurements to improve future forecast and science modeling systems.Measurement acquisition will therefore be approached as a system of systems rather than on a mission basis, and a system of this complexity should not be expected to work without full integration and experimental characterization. Although most of the individual technologies enabling to link and coordinate multi-source observations are more or less mature, a few technologies need to be developed and all of them need to be integrated and tested as a system. In order for this validation to occur, the AIST Program is developing the NOS Testbed that includes 3 main goals:1.Validate novel NOS technologies, independently and as a system2.Demonstrate novel distributed operations concepts3.Socialize new Distributed Spacecraft Mission (DSM) and SensorWeb (SW) technologies and concepts to the science community by significantly retiring the risk of integrating these new technologies.The NOS Testbed will consist of multiple sensing nodes, simulated or actual, representing space, air and/or ground measurements, that are interconnected by a communications fabric (infrastructure that permits nodes to transmit and receive data between one another and interact with each other). Each node will be supported by hardware capabilities required to perform nodes monitoring and command & control, as well as intelligent "onboard" computing. The nodes will work together in a collaborative manner to demonstrate optimal science capabilities. The testbed will enable to validate technologies such as inter-node communication models, techniques and protocols; inter-node coordination; real-time data fusion and understanding; planning; sensor re-targeting; etc. Additionally, the testbed will have the capability to interact with various mission design tools, OSSEs and one or several forecast models. More details about the NOS Testbed will be presented at the confererence.

Earth Science missions; Advanced information Syste↗

Ammonia-Based Energy Storage Technology

The University of North Dakota Energy & Environmental Research Center (EERC), in partnership with the U.S. Department of Energy National Energy Technology Laboratory (NETL), Basin Electric Power Cooperative, Minnkota Power Cooperative, Otter Tail Power Company, and the North Dakota Industrial Commission (energy technology research and development sponsor), undertook a project to model, validate, and advance (from Technology Readiness Level [TRL] 2 to TRL 3) the ammonia-based energy storage technology (NH 3 -BEST) concept. The concept is designed to enable electricity-generating unit (EGU) accommodation of power demand fluctuations while steadily operating within an optimal-performance baseline power output range, ensuring maximum EGU operational efficiency and minimum degradation of materials, equipment, and performance because of load-cycling-driven stresses.

25 ENERGY STORAGE↗

Technical Assessment of Geologic Carbon Dioxide (CO 2 ) Storage: Best Practices Derived from Phase III of the Plains CO 2 Reduction (PCOR) Partnership Program, 2007-2018

The Plains CO 2 Reduction (PCOR) Partnership, led by the Energy & Environmental Research Center (EERC), was formed as part of the U.S. Department of Energy (DOE) Regional Carbon Sequestration Partnerships (RCSP) Initiative in 2003. The RCSP Program supports deployment of carbon capture, utilization, and storage (CCUS) technologies—with primary focus on carbon utilization and geologic storage of carbon dioxide (CO 2 ) (hereafter referred to as storage)—as an essential means of reducing the carbon intensity of electricity generation and other CO 2 -emitting industrial processes. The PCOR Partnership has a growing membership, which has included over 120 industry, government, and research organizations, and over a decade of experience developing, testing, and validating methods and technologies for conducting CO 2 storage projects. Nine U.S. states and four Canadian provinces comprise the PCOR Partnership region, covering an area of 1.4 million square miles in the northern Great Plains.

02 PETROLEUM↗

NASA's Photovoltaic Energy Research Plans and Programs

This presentation reports efforts at the NASA Glenn Research Center (GRC) in research and development of photovoltaics and solar arrays for unique mission needs. The work of the photovoltaic team spans low technology readiness levels (TRL) in areas of cell development to high TRL in support of flight experiments and space missions. This presentation will highlight the various solar power programs and characterization and test facilities at NASA GRC. The photovoltaic work at NASA GRC focuses on multiple areas from helping to meet NASA mission specific needs to overall improvements to space solar cell technology including increasing cell efficiency, reduced cost, reduced weight, and improved radiation tolerance. We support higher power systems like Solar Electric Propulsion for Gateway and power for Lunar and Mars Surface Missions (rovers, landers, power stations, etc.) including work to understand the impact of dust on these systems. The overarching goal of the GRC photovoltaic group is to serve as an independent source of verification and validation of solar technologies for other government agencies and industry, to provide expertise to flight missions, and to build on interactions and collaborations within the technical community.

Photovoltaics↗

Examination of Na-Doped Mo Sputtering for CIGS Devices (CRADA Final Report)

Na is an important ingredient in Cu(In,Ga)(Se,S) 2 (CIGS) photovoltaic devices, due to its ability to increase carrier density and passivate surfaces, grain boundaries, and Se vacancies. In the highest efficiency devices, Na is supplied to the growing CIGS film by diffusion through the Mo back contact from the sodalime glass substrate. This arrangement is problematic in that the Na content of the film is only indirectly controlled: deposition times, deposition temperatures, Mo morphology, and glass composition are coupled with the Na diffusion. Results in the literature show that the Mo, not the CIGS, is the primary barrier to Na diffusion. Alternatively, using a Na-free substrate or diffusion barrier, Na may be introduced by a NaF precursor deposited on top of the Mo. However, this forces a trade-off between carrier density and adhesion. If the NaF is not entirely consumed, the CIGS layer peels away from the Mo, encouraging the use of less NaF even though the best device properties tend to result from the thickest possible NaF layers. Furthermore, although early studies show that gross control of Na is sufficient to produce 12-14% small devices, the industry has reached this level and is ready to progress to higher performance. The sensitivity of NREL device efficiency (15 to 20%) to Mo morphology suggests that fine control of Na content is necessary for very high performance. This work has investigated the use of Na doped Mo (“MONA”) sputtering targets for use in preparing CIGS devices. The Mo:Na material is doped to about 3% Na by weight, implying that a 40 nm layer on top of the standard Mo contact validation of their product. contains sufficient Na to dope a 2.5 µm CIGS film. The ability to control Na doping independent of both CIGS processing conditions and adhesion is an important gain for industry and research. Manufacturers gain a route to increased manufacturability and performance, while NREL researchers gain a tightened performance distribution of devices and increased process flexibility. Our immediate partner in this work, the Climax Molybdenum Technology Center, gains validation of their product.

14 SOLAR ENERGY↗

UV-LED

UV-LED is part of a small satellite technology demonstration mission that will demonstrate non-contacting charge control of an isolated or floating mass using new solid-state ultra-violet light emitting diodes (UV-LEDs). Integrated to the Saudisat-4 spacecraft and launched onboard the Dnepr in June 19, 2014, the project is a collaboration between the NASA Ames Research Center (ARC), Stanford University, and King Abdulaziz City for Science and Technology (KACST). This technology demonstration will validate a novel method of charge control that will improve the performance of drag-free spacecraft allowing for concurrent science collection during charge management operations as well as reduce the mass, power and volume required while increasing lifetime and reliability of a charge management subsystem. These improvements are crucial to the success of ground breaking missions such as LISA and BBO, and demonstrate the ability of low cost small satellite missions to provide technological advances that far exceed mission cost.

Faied, Dohy↗