Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Addressing qubits with a software-defined radio FPGA (Full Technical Final Report)

Superconducting transmons can be configured as qubits and can also be used for weak signal axion searches. During a prior LDRD (17-ERD-006), a robust capability for system simulation and analysis, algorithm development, algorithm to FPGA workflow and experimental measurements was developed. During that project it was determined that a new software-defined radio FPGA would be a significant improvement in cost, simplicity, and software maintainability over the X6-1000M FPGA plus RF front-end system that had been used. In this Feasibility Study, we successfully developed the interface to the new NI USRP-2954R SDR platform, generated and optimized the VHDL of the existing algorithms, and experimentally tested the new FPGA system on real qubit in the laboratory. These tests showed it had the same SNR on weak measurements as the prior FPGA.

42 ENGINEERING↗
DOE OSTI2021

Agricultural Impacts on Nitrogen Cycling: Climate and Air Pollution (Final Technical Report)

We have successfully added a parameterization of ammonia emissions from synthetic fertilizer and manure from agriculture to Earth System Models. We have evaluated how emissions change in the future and the processes driving these changes. We have examined the impact of agricultural ammonia emissions on present-day air quality and have evaluated the impact of resolving the emissions with high temporal resolution. We have also examined the impact of how Earth System Models treat the cycling of emissions in soils. Our code, the Flows of Agricultural Nitrogen – version 2 – model (FANv2) has been run in both the CLM framework and the ELM framework. To my knowledge the code has not yet been fully implemented into ELM. Volatilization of ammonia (NH3) from fertilizers and livestock wastes forms a significant pathway of nitrogen losses in agricultural ecosystems and constitutes the largest source of atmospheric emissions of NH3. We have provided a major update to the process model FAN (Flow of Agricultural Nitrogen), which evaluates NH3 emissions interactively within an Earth system model; in this work, the Community Earth System Model (CESM) is used. The updated version (FANv2) includes a more detailed treatment of both physical and agricultural processes, which allows the model to differentiate between the volatilization losses from animal housings, manure storage, grazed pastures, and the application of manure and different types of mineral fertilizers. The modeled ammonia emissions are first evaluated at a local scale against experimental data for various types of fertilizers and manure, and they are subsequently run globally to evaluate NH3 emissions for 2010–2015 based on gridded datasets of fertilizer use and livestock populations. Comparison of regional emissions shows that FANv2 agrees with previous inventories for North America and Europe and is within the range of previous inventories for China. However, due to higher NH3 emissions in Africa, India, and Latin America, the global emissions simulated by FANv2(48 Tg N) are 30 %–40 % higher than in the existing inventories.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Incorporating new evaluation on angular distributions and energy spectra of neutron-induced charged particle reactions into the next ENDF library release (Technical Progress Report)

This project aims to provide the improved Evaluated Nuclear Data File (ENDF) using the newly measured data as well as the latest nuclear reaction model for calculating angular distributions and energy spectra on neutron-induced charged particle reactions through the collaboration of Korea Atomic Energy Research Institute (KAERI) and Los Alamos National Laboratory (LANL). The LANL group will provide the experimental data for angular distributions and spectra of (n,p) and (n,α) on several structural materials such as Fe, Ni and Zn isotopes using the Low Energy Neutron-induced Charged-particle (Z) Chamber (LENZ) instrument at Los Alamos Neutron Science Center (LANSCE). The KAERI group will provide the improved evaluated nuclear library which is based on the LANL experimental data, and further will predict angular distributions and spectra of (n,p) and (n,α) reactions on unmeasured nuclides, such as Cr, Mn, Co, Cu and so on. For the first year of this project, we planned to analyze (n,p) and (n,α) reactions for 54,56 Fe and perform new measurements on those reactions for 58,60 Ni isotopes with the LENZ instrument at LANSCE. For improving our evaluation quality, we have studied reaction models to reproduce LANL’s experimental angular distributions and energy spectra using the full Hauser-Feshbach model code, CoH3 with no approximations used. As the first year’s deliverables, we provided the experimental (n,p) and (n,α) reaction cross sections for 54,56 Fe and incorporate new evaluation on angular distributions and energy spectra of neutron-induced charged particle reactions into the current ENDF/B-VIII.0.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Density Tailored Capillary Discharge (Final Technical Report)

This final report describes efforts to validate a novel way to drive capillary discharges in order to achieve true matched guiding of a focused laser beam traveling along the capillary. Achieving such matched guiding is important for laser plasma accelerators, such as ones based upon laser wakefield acceleration. During this Phase II program, a computer model, which was specifically designed to predict the time-dependent behavior of the capillary discharge, was exercised to determine whether unconventional ways to drive the discharge may yield matched guiding. A custom power supply was built to drive the capillary discharge in the unconventional manner specified by the model. Experiments performed at STI Optronics seemed to support the predictions of this model; however, subsequent more accurate measurements performed at Lawrence Berkeley National Laboratory did not agree with the model predictions.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Molecular Optoelectronics (Final Technical Report)

The project developed new theoretical tools for analysis of nanodevices subjected to external optical and bias driving. Traditional theoretical techniques for molecular optoelectronics are either based on kinetic schemes or utilize quasiparticle description. The former fails to account for quantum mechanics of the system-bath interface and may fail qualitatively when used in open interacting systems. The latter is inconvenient in (usual for molecular optical spectroscopy) many body states description of the system. We developed a new technique - the Hubbard nonequilibrium Green's functions method - which allows to avoid shortcomings of standard theoretical approaches. The Hubbard NEGF was applied to analysis of experimental measurements of photoinduced current and bias-induced electroluminescence in STM molecular junctions. We also demonstrated practical usefulness of the Hubbard NEGF within newly proposed universal theory of current-induced forces for nonadiabatic molecular dynamics which generalizes celebrated Head-Gordon and Tully expression for electronic friction. Finally, following latest trends in laser techniques we studied local responses (local fluxes and local noise spectroscopy) of biased junctions as a source of information not accessible by total responses (total fluxes and noises) of the system.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Wyandotte Integrated Renewable Energy Strategy (WIRES 2) (Final Technical Report)

Wyandotte Municipal Services (WMS), a Michigan Municipal Utility offering electric generation, transmission & distribution, water filtration & distribution and Broadband/Video sought to deploy a set of renewable energy projects for their Electric Utility that contributed to reducing the City’s environmental and energy impact, provided examples that would encourage businesses and citizens to adopt cleaner energy practices and help WMS meet the required renewable energy standards of the State of Michigan (10% in 2015, 15% in 2021). WMS generates and delivers roughly 280,000 megawatt hours (MWh) of electricity annually to more than 10,000 homes and 1,000 businesses within the City of Wyandotte. The Wyandotte Integrated Renewable Energy Strategy – WIRES 2 resulted in deployment of a set of community-scale micro-wind turbines, evaluation and installation of energy-efficient and low-maintenance light-emitting diode (LED) street lights and park lights in highly visible locations in the City and expansion of the geothermal heating and cooling district that already included residential geothermal systems, to include larger scale business/institutional systems at the Utility’s largest electric customer and at the City Library. Finally, WMS identified the need for job training in energy efficiency and renewable energy technologies to further develop a local skilled workforce in these areas. Partially funded by the grant, the wind turbine project provides a benchmark for WMS, local businesses and residents in the evaluation of utility-scale wind v. micro-wind in an urban environment as a renewable energy strategy. Also partially funded by the grant, the LED project benefited the City of Wyandotte by reducing load on the electric system for the public utility but also reduced City costs for streetlighting, parking lot lighting and park lighting without a compromise in security. The project also resulted in a visual success that has led to additional approvals for non-Grant related LED lighting installations resulting in further reduction in the electric load in the City. Commercial Geothermal installations resulted in the Utility being able to eliminate steam customers who formerly utilized the byproduct of steam from WMS electric production. Due to the reduction in natural gas prices and the overall reduction in market purchased power, it was no longer feasible for WMS to operate its Power Plant as a base load plant and to only operate on a market dispatch philosophy when market prices dictated that WMS could produce electricity cheaper than the market purchase price. This has resulted in fewer operating days for the WMS Power Plant, resulting in less environmental impact. WMS has now completely exited the steam business and the ability to offer a geothermal option to two (2) former steam customers (BASF-Wyandotte and the Bacon Memorial Library) allowed for that. In addition, peak loads have been shaved for these two (2) large customers due to the consistent temperature offered by geothermal heating and cooling, reducing the swings associated with thermostat changes caused by outside temperature changes during extreme high and low temperatures. Finally, energy efficiency and renewable energy college-level classes at Wayne County Community College allowed a group of interested students to pursue studies in those technologies through grant provided tuition, books and course materials. This effort provided a foundation of potential future employees not only for WMS but other energy efficiency/renewable energy employers such as Franklin Energy, a partner with WMS in energy optimization efforts with Wyandotte businesses.

17 WIND ENERGY↗
DOE OSTI2020

Pumped Storage Hydropower FAST Commissioning Technical Analysis

This report is designed to address barriers and solutions to modern pumped storage hydropower (PSH) development by establishing baseline project development knowledge, defining key aspects of project development, and identifying opportunities to reduce project timelines, costs, and risks. This report’s scope includes post-licensing activities and excludes factors related to permitting or licensing. The U.S. PSH fleet is composed of 43 projects providing the majority (95%) of utility-scale electricity storage in the US. However, only one new PSH facility has become operational in the past 20 years. Several factors contribute to diminishing PSH growth in the US, including the magnitude of project costs and financing interest during development and construction; the length of time from project investment until project revenue; permitting challenges and construction risks; competition from other storage technologies; and unrecognized energy storage valuation. Although innovative PSH concepts (including underground, small, and modular systems) have been investigated, widespread application has yet to occur. In short, the time, cost, and risk associated with modern PSH development has resulted in limited recent growth in the United States, despite the rising energy storage demand from increased deployment of variable renewable technologies. To address these challenges, the US Department of Energy’s (DOE) Water Power Technologies Office initiated the PSH Furthering Advancements to Shorten Time to (FAST) Commissioning project, aimed at catalyzing new solutions, designs, and strategies to accelerate PSH development. This report uses available data from previous license applications, ongoing project cost data, and other global PSH project information based on a typical closed-loop PSH project.

13 HYDRO ENERGY↗
DOE OSTI2020

Early Career: Mesoscale Fragments of Crystalline Silicon by Chemical Synthesis (Final Technical Report)

Silicon has transformed the modern era, with applications in computing, solar cells, energy storage, and beyond. The traditional approach to making silicon is a high-temperature “top-down” process that affords only the most stable form of silicon, leaving hidden vast swathes of structure-function space. The goal of this program was to establish new approaches to making silicon-based materials from the bottom-up, allowing structural precision from the atomic level up to the bulk, and to understand how structure influences function. Key results included the development of the cyclosilane building blocks and low-temperature methods for their polymerization, as well as new tools for spectroscopic characterization. In addition to revealing new materials chemistry insights, in the five-year period covered by this award, this work resulted in 11 publications and three graduate student theses.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Functional Ion Pair Receptors Targeting Cesium, Lithium, Sulfate, and Uranyl (Final Technical Report)

The major goal of this project was the synthesis and study of receptors for key ions of interest to the DOE mission, namely cesium, lithium, sulfate, hydroxide, carbon dioxide/bicarbonate, and early actinides. The work, fundamental in nature, had as its objective achieving an increased understanding of how changes in receptor design could be used to optimize binding energies, ion specificity, complex structure, extraction efficiency, and substrate release. Within this broad paradigm, particular emphasis was placed on systems that could be used to sense the cesium cation in mixed aqueous media and act as extractants for the lithium cation and, separately, the carbon dioxide/bicarbonate and hydroxide anions in the form of ion pairs likely to be encountered under conditions of putative use in the field. The development of new nitrogen-rich ligands that act as receptors for early, high-valent actinide cations was also a major point of emphasis. The first in-plane actinide complexes were synthesized using a hexa-aza porphyrin analogue. The complexes exhibited an increase in the ligand–metal bonding covalency on passing from thorium(IV) to uranium(IV) to neptunium(IV) and illustrates how the use of appropriate porphyrinoid-like ligands could be used to modulate the covalency interactions between an f-element metal center and a ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Medium-duty Urban Range Extended Connected Powertrain (Final Scientific Technical Report)

The project goal is to develop and demonstrate a Class 4 delivery vehicle that reduces fuel consumption by 50% or more when compared to an equivalent vehicle with a conventional internal combustion engine (ICE) powertrain driven on a comparable duty cycle. This shall be achieved using a plug-in hybrid electric (PHEV) configuration that optimizes the efficiency of the ICE. The proposed solution aims to be commercially viable for fleets to procure the system without additional incentives. To accomplish this, commercialized light-duty vehicle electric drive components shall be used. A PHEV configuration for Class 4 MD/HD vocational vehicles using commercialized light-duty vehicle electric drive components will require the development of a new topology for the hybrid powertrain applicable to medium-duty vehicles. Prior research indicates that an identified novel power split device could provide a fuel economy improvement potential of up to 51%. Utilizing an advanced battery management algorithm that will allow operation closer to the battery limits, the project will minimize battery capacity to achieve the desired performance results while maintaining the cost target for high commercialization. The solution must be cost effective to purchase and integrate into a Class 4 delivery vehicle, deliver the intended fuel economy improvement, and perform as well, or better, than the current conventional ICE powertrain. MD/HD vehicles typically require higher power, which is one factor that results in high costs for the powerful electric machines typical in larger HEV/PHEV systems. A key element in the project is the use of commercially available Bosch electric drive components (e.g., motors, batteries, and power electronics) from the larger passenger vehicle segment. This leverages the economies of scale to decrease cost and improve reliability beyond current purpose-built low-volume commercial vehicle components. These innovations will result in a game-changing PHEV system that meets DOE’s 50% fuel consumption reduction target, grants the vehicle an uncompromised driving range, and achieves the cost point for widespread adoption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Structural Optimization (Final Technical Report V.2.0)

The overall Project (Project) objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPwr) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing structural material and manufacturing costs and increasing energy output. In this Project, improving the overall Power-to-Weight ratio (PWR) is accomplished through lowering design margins - allowing for weight reduction and more efficient, cost-effective WEC manufacturing and assembly - and by optimizing mass-related WEC performance parameters, such as center of gravity and system inertia. A mixed materials approach to further structural optimization was developed under this Project and validated with extensive laboratory structural testing. This approach substitutes fiber-reinforced plastic (FRP) for steel where appropriate. The benefits of steel are maintained where most useful, for instance at structural joints where the stiffness of steel is required, and the complex geometry is more readily fabricated with steel. However, there are structural spans whose simple shapes are readily fabricated with mandrel-wound FRP and where significant cost and weight savings can be found. An adhesive, double lap shear joint is used to join the FRP and steel subcomponents.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Photodamage and Repair in Higher Plant Photosynthesis (Final Technical Report)

Elucidation of the functional properties and structural organization of membrane protein complexes is one of the central objectives of current biochemical investigation. One of the most intriguing aspects of membrane protein function is its role in the mediation of energy transduction in photosynthetic organisms. Light energy, which is the product of a most violent physical process, fusion, is transformed into biological energy equivalents utilized by the photosynthetic cell. This photosynthetic process provides both the carbohydrate that lies at the base of virtually all food chains and, as a byproduct, all of the atmospheric oxygen utilized by heterotrophic organisms. The photosynthetic apparatus, however, is quite susceptible to damage by Reactive Oxygen Species (ROS). These species include O2 ·– , ·OH, H 2 O 2 and 1 O 2 . The production of ROS is an unavoidable byproduct of electron transport under aerobic conditions and these can damage lipids, nucleic acids and proteins. Our research has centered on the identification of amino acid oxidative damage which occurs in the vicinity of photosynthetic energy transfer cofactors. These cofactors participate in excitation energy transfer and linear electron transport within Photosystem II, the Cytochrome b 6 ƒ complex and Photosystem I. Additionally, we have participated in a number of productive collaborations leveraging our expertise in photosynthetic measurements and mass spectrometry to assist other investigators in their research.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Extreme Fast Charging Lithium-Ion Batteries (Final Technical Report)

The objective of this research project is to develop, design, fabricate, and demonstrate lithium ion battery cells that optimize energy density, reduce cost, and demonstrate eXtreme Fast Charging (XFC) capabilities. The XFC capability of the cell will be determined by the final specific energy of the cell after completing 500 6C charge /1C discharge cycles. Over the first 18 months of the project, over 800 cells were produced in groups of 20 cells to determine the optimum configuration of following parameters to optimized XFC performance: (1) Graphite anode material optimization (2) Electrolyte and additive optimization (3) Electrode and cell design optimization. In the final 6 months of the project, over 200 optimized cells were produced that featured optimized parameters from each of the independent studies. The final optimized cells exhibited a final specific energy of 150 Wh/kg, meeting the DOE project goal, but failing to meet the initial specific energy requirement of 180 Wh/kg.

25 ENERGY STORAGE↗
DOE OSTI2021

Long Range Community Planning Process for Fusion Sciences and Plasma Physics (Final Technical Report)

This grant facilitated the APS-DPP Community Planning Process (DPP-CPP) which was a strategic planning process with the goals of identifying scientific and technological opportunities in the fields of Plasma Physics and Fusion Energy Science, and making consensus recommendations for a strategy to address these opportunities to the DOE Office of Fusion Energy Science Advisory Committee (FESAC). The DPP-CPP was initiated by the APS-DPP executive committee in order to help FESAC fulfill a charge from DOE to develop a strategic plan for the DOE Office of Fusion Energy Science (FES). In this charge, the DOE Deputy Director for Science, Dr. Stephen Binkley, requests “that the Fusion Energy Sciences Advisory Committee (FESAC) undertake a new long-range strategic planning activity for the Fusion Energy Sciences (FES) program. The strategic planning activity - to encompass the entire FES research portfolio (namely, burning plasma science and discovery plasma science) - should identify and prioritize the research required to advance both the scientific foundation needed to develop a fusion energy source, as well as the broader FES mission to steward plasma science.” The process as set out in the proposal (and below) was successful in meeting all of its stated goals culminating in the final report to the FESAC subcommittee given the charge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Cummins Electric Truck with Range-Extending Engine (ETREE) Project (Final Technical Report)

The Cummins Electric Truck with Range Extending Engine (ETREE) program designed, developed, and demonstrated a range extending electric vehicle that employs an electrified propulsion system installed in a class 6 commercial vehicle (Peterbilt 220). This project was relevant to industry and the greater public because at the time of the project there were two keys to widespread electrified commercial vehicle adoption yet to be realize: 1) For pure electrified vehicle adoption, battery improvements are needed: Cost must decrease, and energy density must increase. 2) Electric vehicles must overcome fleet operator risks such as: operations in cold climates, hilly terrain, or where majority of conventional trucks are replaced with electrified vehicles. In the near to medium term these adoption hurdles were address by the objectives of this project. A plug-in hybrid vehicle that could be operated in all electric mode for most of its workday optimizing the use of grid energy with the ability to supplement energy demand with the onboard range extending engine. This project’s architecture provided ability to match a conventional class 6 commercial vehicle range and performance characteristics prior to the ubiquitous adoption of battery electric vehicle charging infrastructure as well. Additionally, the vehicles produced as part of this project can be considered a prototype for a commercially viable heavily electrified commercial vehicle because most of the physical hardware used for the project is commercially available in the market today. The ETREE program met its main objectives and demonstrated 65% fuel consumption reduction as compared to a conventional class 6 vehicle while meeting performance and range expectations. This was achieved by drawing upon the strengths of the assembled team: Cummins, PACCAR, the Ohio State University, Argonne National Laboratory and the National Renewable Energy Laboratory.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Particle Track Classification Using Quantum Associative Memory (Final Technical Report)

This project explored the use of quantum-assisted algorithms for pattern matching in sub-atomic physics experiments. Pattern matching algorithms are commonly employed to prune data of random noise and to help discriminate between signals generated by particle tracks of interest and signals generated by background events. The quantum-assisted algorithms explored in this project were based on an Ising formulation of quantum associative model (QAMM) recall and quantum content-addressable memory (QCAM) recall. The recall is performed by comparing a probe pattern with those stored in a library of patterns encoded in the QAMM/QCAM model. The classification accuracy of QAMM and QCAM recall was determined as a function of detector resolution, noise, and efficiency and pattern density, where pattern density is defined as the ratio of the number of reference signal patterns encoded in the library to each pattern’s length. We found that QAMM achieved high classification accuracy when applied to datasets with low pattern density. QCAM achieved high classification accuracy for datasets with high pattern density and was found to be more robust to detector noise. The project methodology and results are described in detail in our arXiv preprint (arXiv:2011.11848) . This project was conducted by scientists at the Johns Hopkins University Applied Physics Laboratory and Oak Ridge National Laboratory from August 2018 to August 2020 and was supported by DOE grant DE-SC0019497.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Enabling Efficiencies > 22.5% with Metal Oxide Passivating Contacts using Low-Cost Spatial Atomic Layer Deposition (Final Technical Report)

In this project, the University of Central Florida (UCF) worked to both increase module efficiency and reduce manufacturing cost by driving demonstrated lab-scale passivating contact technology using materials and processes compatible with high-volume manufacturing for crystalline silicon (c-Si) photovoltaic (PV) cells. Passivating contacts have garnered significant attention in recent years. They provide a means of suppressing contact recombination, a loss mechanism that limits the performance of industrially relevant cell architectures like Al back surface field (Al-BSF) cells and passivated emitter and rear cells (PERC). Most of the development of passivating contact technology has focused on the use of doped amorphous silicon or doped polysilicon contacts, but both suffer from parasitic optical absorption amongst other issues. Our team developed fully transparent hole-selective heterojunctions, deposited using atomic layer deposition (ALD), and showed how they could be incorporated into c-Si PV cells. The team conducted experiments to understand the process-structure-property relationship of hole-selective oxides, surface passivation oxide materials, and transparent conductive oxides deposited by ALD, and use that understanding to reduce contact recombination, contact resistivity, and parasitic optical absorption within c-Si PV cells. Before getting into the details of the report, we would like to note that COVID-19 has made it more challenging to conduct experimental research at UCF. UCF has a number of mandatory policies in place to ensure social distancing, testing, and contact tracing are all carried out in day-to-day operations. Despite these challenges, we worked diligently to make progress on this project in a manner that was as safe as possible. Over the course of the project, the UCF team and its collaborators have made the following discoveries and developments.

14 SOLAR ENERGY↗
DOE OSTI2021

Dense Pair and Gamma-Ray Creation Using Ultra-Intense Lasers (Final Technical Report)

Lasers with intensity >1.4x10 18 W.cm -2 irradiating solid targets couple 10-50% of its energy to “hot electrons” near the critical surface, with temperature kT > mc 2 . When these hot electrons impact high-Z target ions (e.g. Au, Pt), they emit copious bremsstrahlung gamma-rays and create e + e - pairs via the Trident process. For targets thicker than ~0.1mm, the gamma-rays create secondary pairs via the Bethe-Heitler processes. The concept of using lasers to create pairs was first studied by Shearer et al (1973). Motivated by the rapid advance of short-pulse ultra-intense lasers based on chirped-pulse amplification, Liang (1994) first proposed irradiating solid Au targets with laser intensity ≥10 20 W.cm -2 to create dense e + e - pairs. Using particle-in-cell (PIC, Birdsall and Langdon, 1991) simulations, Liang et al (1998, 2002) estimated that high-energy PW lasers can in principle achieve ultra-high in-situ pair densities. Subsequent studies supported this idea and found that for gold foils thicker than ~50 μm, the pair yield is dominated by the Bethe-Heitler (BH, Heitler 1954) process. Cowan et al (1999, 2000) using the LLNL Nova PW-laser to irradiate 125μm gold foils first observed pair creation, followed by Chen et al (2009) who demonstrated copious BH pair creation using the Titan, Omega-EP and Orion lasers. However, the emerging e + /e - ratio of these experiments was ≤ few %, and the pair density was only 10 13 /cc so that the pair jet transverse size R(~mm) was < pair skin depth c/ω + (=8πn+e 2 /m) 1/2 ). This was insufficient to qualify as a bona fide ”pair plasma”.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗