Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Low-thrust chemical propulsion system propellant expulsion and thermal conditioning study

Thermal conditioning systems for satisfying engine net positive suction pressure (NPSP) requirements, and propellant expulsion systems for achieving propellant dump during a return-to-launch site (RTLS) abort were studied for LH2/LO2 and LCH4/LO2 upper stage propellant combinations. A state-of-the-art thermal conditioning system employing helium injection beneath the liquid surface shows the lowest weight penalty for LO2 and LCH4. A technology system incorporating a thermal subcooler (heat exchanger) for engine NPSP results in the lowest weight penalty for the LH2 tank. A preliminary design of two state-of-the-art and two new technology systems indicates a weight penalty difference too small to warrant development of a LH2 thermal subcooler. Analysis results showed that the LH2/LO2 propellant expulsion system is optimized for maximum dump line diameters, whereas the LCH4/LO2 system is optimized for minimum dump line diameter (LCH4) and maximum dump line diameter (LO2). The primary uncertainty is the accurate determination of two-phase flow rates through the dump system; experimentation is not recommended because this uncertainty is not considered significant.

Merino, F.↗
NASA NTRS1984

Remote sensing of near surface humidity over north Pacific

Humidity soundings at 12 midocean stations of small islands and weather ships in the north Pacific from 7 deg N to 57 deg N during a 9-year period from 1972 to 1980 were used to study the variation of columnar water vapor W (as measured by spaceborne sensors) in relation to the variation of surface level specific humidity Q (as required in the determination of air-sea moisture and latent heat exchanges). It was found that a simple regression can be used to specify monthly mean Q from W to an accuracy of about 0.0008, corresponding to about 20 W/sq m in latent heat flux. The regression accounts for both temporal and spatial variations of Q and W. Better accuracy can be achieved by using regional regressions. The study affirms the potential of spaceborne sensors in providing global monitoring of air-sea moisture and heat exchanges.

Liu, W. T.↗
NASA NTRS1998

Variability of Arctic Sea Ice as Viewed from Space

Over the past 20 years, satellite passive-microwave radiometry has provided a marvelous means for obtaining information about the variability of the Arctic sea ice cover and particularly about sea ice concentrations (% areal coverages) and from them ice extents and the lengths of the sea ice season. This ability derives from the sharp contrast between the microwave emissions of sea ice versus liquid water and allows routine monitoring of the vast Arctic sea ice cover, which typically varies in extent from a minimum of about 8,000,000 sq km in September to a maximum of about 15,000,000 sq km in March, the latter value being over 1.5 times the area of either the United States or Canada. The vast Arctic ice cover has many impacts, including hindering heat, mass, and y momentum exchanges between the oceans and the atmosphere, reducing the amount of solar radiation absorbed at the Earth's surface, affecting freshwater transports and ocean circulation, and serving as a vital surface for many species of polar animals. These direct impacts also lead to indirect impacts, including effects on local and perhaps global atmospheric temperatures, effects that are being examined in general circulation modeling studies, where preliminary results indicate that changes on the order of a few percent sea ice concentration can lead to temperature changes of 1 K or greater even in local areas outside of the sea ice region. Satellite passive-microwave data for November 1978 through December 1996 reveal marked regional and interannual variabilities in both the ice extents and the lengths of the sea ice season, as well as some statistically significant trends. For the north polar ice cover as a whole, maximum ice extents varied over a range of 14,700,000 - 15,900,000 km(2), while individual regions showed much greater percentage variations, e.g., with the Greenland Sea experiencing a range of 740,000 - 1,1110,000 km(2) in its yearly maximum ice coverage. Although variations from year to year and region to region are large, overall the Arctic ice extents did show a statistically significant, 2.8%/ decade negative trend over the 18.2-year period. Ice season lengths, which vary from only a few weeks near the ice margins to the full year in the large region of perennial ice coverage, also experienced interannual variability, and mapping their trends allows detailed geographic information on exactly where the ice season lengthened and where it shortened. Over the 18 years, ice season lengthening occurred predominantly in the western hemisphere and was strongest in the western Labrador Sea, while ice season shortening occurred predominantly in the eastern hemisphere and was strongest in the eastern Barents Sea. Much information about other important Arctic sea ice variables has also been obtained from satellite data, including information about melt ponding, temperature, snow cover, and ice velocities. For instance, maps of ice velocities have now been made from satellite scatterometry data, including information about melt ponding, temperature, snow cover, and ice velocities.

Parkinson, Claire L.↗
NASA NTRS2007

Electric Propulsion Interactions Code (EPIC): Recent Enhancements and Goals for Future Capabilities

The Electric Propulsion Interactions Code (EPIC) is the leading interactive computer tool for assessing the effects of electric thruster plumes on spacecraft subsystems. EPIC, developed by SAIC under the sponsorship of the Space Environments and Effects (SEE) Program at the NASA Marshall Space Flight Center, has three primary modules. One is PlumeTool, which calculates plumes of electrostatic thrusters and Hall-effect thrusters by modeling the primary ion beam as well as elastic scattering and charge-exchange of beam ions with thruster-generated neutrals. ObjectToolkit is a 3-D object definition and spacecraft surface modeling tool developed for use with several SEE Program codes. The main EPIC interface integrates the thruster plume into the 3-D geometry of the spacecraft and calculates interactions and effects of the plume with the spacecraft. Effects modeled include erosion of surfaces due to sputtering, re-deposition of sputtered materials, surface heating, torque on the spacecraft, and changes in surface properties due to erosion and deposition. In support of Prometheus I (JIMO), a number of new capabilities and enhancements were made to existing EPIC models. Enhancements to EPIC include adding the ability to scale and view individual plume components, to import a neutral plume associated with a thruster (to model a grid erosion plume, for example), and to calculate the plume from new initial beam conditions. Unfortunately, changes in program direction have left a number of desired enhancements undone. Variable gridding over a surface and resputtering of deposited materials, including multiple bounces and sticking coefficients, would significantly enhance the erosion/deposition model. Other modifications such as improving the heating model and the PlumeTool neutral plume model, enabling time dependent surface interactions, and including EM1 and optical effects would enable EPIC to better serve the aerospace engineer and electric propulsion systems integrator. We review EPIC S overall capabilities and recent modifications, and discuss directions for future enhancements.

Gardner, Barbara M.↗
NASA NTRS2011

Improvement of the GEOS-5 AGCM upon Updating the Air-Sea Roughness Parameterization

The impact of an air-sea roughness parameterization over the ocean that more closely matches recent observations of air-sea exchange is examined in the NASA Goddard Earth Observing System, version 5 (GEOS-5) atmospheric general circulation model. Surface wind biases in the GEOS-5 AGCM are decreased by up to 1.2m/s. The new parameterization also has implications aloft as improvements extend into the stratosphere. Many other GCMs (both for operational weather forecasting and climate) use a similar class of parameterization for their air-sea roughness scheme. We therefore expect that results from GEOS-5 are relevant to other models as well.

Garfinkel, C. I.↗
NASA NTRS1997

Friction Velocity Estimation Using Dual-Frequency Altimeter Data

Global estimation of wind speeds near the sea-surface can be obtained using normalized radar cross sections sigma(o) from satellite-borne single-frequency altimeters. Indeed recent validation studies of Geosat altimeter-derived wind speeds show that several often cited semiempirical algorithms yield linear trends between wind-speeds from altimeter data and wind speeds from (a) ships of opportunity (Etcheto 1992), (b) buoys (Carter 1992), and (c) atmospheric models (Guillaume 1992). Although the linear trends are striking, there is considerable scatter since the range of standard deviations is from 1.5 to 3 m/s. In fact, the scatter of some particular measurements about the regressions is striking because they depart from the 'standard' by as much as +/- 5 m/s, which is large - even for full gale winds of 20 m/s. These anomalies can cause serious problems for gas exchange, heat, and aerosol estimates. They can also induce considerable errors in wind-driven oceanic circulation models and sea-surface wave models. This paper explores the possibility of improving the accuracy of wind speed estimation using dual-frequency altimeters.

Bliven, Larry F.↗
NASA NTRS2022

Seasonal and Interannual Variability of Tidal Mixing Signatures in Indonesian Seas from High-Resolution Sea Surface Temperature

With their complex narrow passages and vigorous mixing, the Indonesian seas provide the only low-latitude pathway between the Pacific and Indian Oceans and thus play an essential role in regulating Pacific-Indian Ocean exchange, regional air-sea interaction, and ultimately, global climate phenomena. While previous investigations using remote sensing and numerical simulations strongly suggest that this mixing is tidally driven, the impacts of monsoon and El Niño Southern Oscillation (ENSO) on tidal mixing in the Indonesian seas must play an important role. Here we use high-resolution sea surface temperature from June 2002 to June 2021 to reveal monsoon and ENSO modulations of mixing. The largest spring-neap (fortnightly) signals are found to be localized in the narrow passages/straits and sills, with more vigorous tidal mixing during the southeast (boreal summer) monsoon and El Niño than that during the northwest (boreal winter monsoon) and La Niña. Therefore, tidal mixing, which necessarily responds to seasonal and interannual changes in stratification, must also play a feedback role in regulating seasonal and interannual variability of water mass transformations and Indonesian throughflow. The findings have implications for longer-term variations and changes of Pacific–Indian ocean water mass transformation, circulation, and climate.

Indonesian seas↗
NASA NTRS1990

Barotropic motions and the exchange of angular momentum between the oceans and solid earth

The angular momentum exchange between the earth atmosphere and the solid earth is examined with emphasis placed on the role of the ocean in the momentum transfer. Analysis of external torques such as surface wind stresses and continental torques suggest that, in general, the related angular momentum changes are mostly associated with barotropic variability in the ocean. Solutions for a midlatitude basin obtained with a shallow-water numerical model illustrate how angular momentum in a barotropic ocean is exchanged with the solid earth.

Ponte, Rui M.↗
NASA NTRS1994

Atmosphere-biosphere exchange flux of carbon dioxide in a tallgrass prairie modeled with satellite spectral data

The estimation of the rate of net CO2 uptake of vegetated land surfaces is essential for studies of global carbon cycle. The present paper demonstrates the use of spectral reflectance data from satellite remote sensing to model net CO2 flux (NCF) of a tallgrass canopy at the Konza prairie, Kansas. A bidirectional reflectance canopy model was used to estimate seasonal changes in canopy leaf area index (LAI) from surface reflectances remotely sensed by SPOT 1 and Landsat 5 satellites. The radiation model was also coupled with leaf conductance-photosynthesis models to scale up stomatal conductance and NCF from individual leaves to canopy level according to radiation distribution inside the canopy. The satellite-data-driven model was able to closely simulate the seasonal change in LAI as well as the short-term variation of canopy LAI caused by the dry period during late July and early August in the area. Modeled canopy stomatal conductance (g(sub c)) and NCF agree with measurements within 0.16 cm/s and 0.28 mg m(exp -2)/s, respectively, during the growth season from late May to late August. In October both measured and modeled NCF turned to small negative values as canopy photosynthesis diminished and predicted LAI approached zero. In addition to data scatter, some of the differences between modeled and measured g(sub c) and NCF may be attributed to uncertainties in seasonal changes of plant physiological status that were not detected by satellite data; some of the differences were caused by inadequate description of the dependence of nighttime CO2 flux of soil respiration on near-surface turbulent mixing.

Gao, W.↗
NASA NTRS1980

Active heat exchange system development for latent heat thermal energy storage

Various active heat exchange concepts were identified from among three generic categories: scrapers, agitators/vibrators and slurries. The more practical ones were given a more detailed technical evaluation and an economic comparison with a passive tube-shell design for a reference application (300 MW sub t storage for 6 hours). Two concepts were selected for hardware development: (1) a direct contact heat exchanger in which molten salt droplets are injected into a cooler counterflowing stream of liquid metal carrier fluid, and (2) a rotating drum scraper in which molten salt is sprayed onto the circumference of a rotating drum, which contains the fluid salt is sprayed onto the circumference of a rotating drum, which contains the fluid heat sink in an internal annulus near the surface. A fixed scraper blade removes the solidified salt from the surface which was nickel plated to decrease adhesion forces. In addition to improving performance by providing a nearly constant transfer rate during discharge, these active heat exchanger concepts were estimated to cost at least 25% less than the passive tube-shell design.

Alario, J.↗
NASA NTRS1981

Review of biased solar array - Plasma interaction studies

Possible high voltage surface interactions on the Solar Electric Propulsion System (SEPS) are examined, with particular regard for potential effects on SEPS performance. The SEPS is intended for use for geosynchronous and planetary missions, and derives power from deployed solar cell arrays which are susceptible to collecting ions and electrons from the charged and thermal particle environment of space. The charge exchange plasma which provides the thrust force can also enhance the natural charged particle environment and increase interactions between the thrust system and the biased solar array surface. Tests of small arrays have shown that snapover, where current collection becomes proportional to the panel area, can be avoided by larger cell sizes. Arcing is predicted to diminish with larger array sizes, while the problems of efflux environments are noted to be as yet undefined and require further study.

Stevens, N. J.↗
NASA NTRS2013

Surface Ocean pCO2 Seasonality and Sea-Air CO2 Flux Estimates for the North American East Coast

Underway and in situ observations of surface ocean pCO2, combined with satellite data, were used to develop pCO2 regional algorithms to analyze the seasonal and interannual variability of surface ocean pCO2 and sea-air CO2 flux for five physically and biologically distinct regions of the eastern North American continental shelf: the South Atlantic Bight (SAB), the Mid-Atlantic Bight (MAB), the Gulf of Maine (GoM), Nantucket Shoals and Georges Bank (NS+GB), and the Scotian Shelf (SS). Temperature and dissolved inorganic carbon variability are the most influential factors driving the seasonality of pCO2. Estimates of the sea-air CO2 flux were derived from the available pCO2 data, as well as from the pCO2 reconstructed by the algorithm. Two different gas exchange parameterizations were used. The SS, GB+NS, MAB, and SAB regions are net sinks of atmospheric CO2 while the GoM is a weak source. The estimates vary depending on the use of surface ocean pCO2 from the data or algorithm, as well as with the use of the two different gas exchange parameterizations. Most of the regional estimates are in general agreement with previous studies when the range of uncertainty and interannual variability are taken into account. According to the algorithm, the average annual uptake of atmospheric CO2 by eastern North American continental shelf waters is found to be between 3.4 and 5.4 Tg C/yr (areal average of 0.7 to 1.0 mol CO2 /sq m/yr) over the period 2003-2010.

interannual variability↗
NASA NTRS1999

Characterization of the Heat Extraction Capability of a Compliant, Sliding, Thermal Interface for Use in a High Temperature, Vacuum Microgravity Furnace

Much of the material science gained in microgravity research requires processing a sample in a high performance furnace. One such furnace currently being designed is the Quench Module Insert (QMI). The Principle Investigators, for whom the furnace is proposed, require high temperature gradients in their cylindrical samples to achieve the science objectives. One of the components critical to achieving high sample axial temperature gradients in the Quench Module Insert is a high performance cold zone to extract the heat from the sample. This cold zone employs a compliant, sliding thermal interface based on a Vel-Therm felt. This felt provides a conductive path between the Sample Cartridge Assembly (SCA) exterior surface and the interior surface of the water cooled chill block while allowing movement of the sample relative to the chill block. The Vel-Therm felt is composed of long polymer-based fibers affixed to a thin flexible substrate layer. The fibers are oriented perpendicular to this substrate giving the felt the appearance of a velvet fabric. The Vel-Therm felt heat extraction capability was quantified in earlier tests performed in an inert gas environment. The current activity, described in this paper, is intended to characterize the extraction capability of Vel-Therm felt in a vacuum environment similar to the QMI environment. This testing is necessary to quantify the thermal performance of the Vel-Therm felt and the sensitivity of that performance to key variables. The data derived from these tests will be incorporated into the current thermal models to improve the quality of the models and reduce uncertainty of the analytical results. In addition, the data will be used to help select the appropriate Vel-Therm felt and set proper operating limits as well as assess the performance range of the furnace. The objective of this test is to measure the heat extraction rate of the Vel-Therm felt as specified by the effective heat transfer coefficient. Therefore, the test setup was designed to force the bulk of the heat transfer through the area where the Vel-Therm felt was applied. A heat source, consisting of a ceramic heating element encased in a Copper (Cu) housing is mounted on four isolated support rods. A 6-layer molybdenum radiation shield is used to insulate against heat loss from the heater and prevent heat exchange between the hot and cold sides of the test apparatus. The Vel-Therm felt is affixed to the surface of the cold sink, a water-cooled Cu chill block. An adjustable plate supports and isolates the cold sink from above and is used to control the amount of the deflection of the Vel- Therm when in contact with the Cu heating element housing. The primary means of establishing the power being conducted through the felt is to measure the energy being transferred to the water passing through the chill block. Analysis was performed to support the assumption that the source and sink surfaces were approximately isothermal under the specific test conditions. As a check on the amount of power passing through the felt, the power supplied to the heater was also measured. Thermocouples were strategically located throughout the test apparatus for measurement purposes. A bell jar was lowered over the assembly to impose vacuum conditions. Currently, variables tested have been fiber compression and fiber type and surface temperatures (both the hot and cold side temperatures are hypothesized to be important to the performance of the Vel-Therm.) Selected runs were repeated to ensure consistency and repeatability. Results obtained thus far reveal that Vel-Therm performance is significantly degraded by fibers being exposed to high compression. It also shows that performance is somewhat negatively impacted by previous compression, thereby, raising the question of repeatability. In addition, early results show a significant dependence on temperature. A computer aided mathematical analysis of the test setup is ongoing. The results will be correlated to actual results. The correlation will examine such details as parasitic loses, conduction down the power leads and many other concerns.

Bellomy-Ezell, Jenny↗
NASA NTRS1973

In situ detection of microbial respiration in soils and salt flats

Increase in CO2 partial pressures over a desert soil treated with casamino-acids glucose solution correlated with bacterial growth. Few or no increases in numbers of bacteria or CO2 concentrations were noted in similar plots treated with water only or receiving no treatment. Growth in the soil appeared to be severely nutrient limited during the 10 day experiment. Especially rapid growth took place between the third and fifth day, when temperatures ranged from 0 deg. (night) to a maximum of 17.4 deg. (day). Under the conditions of the experiment, intermittent CO2 assay was an insensitive indicator of growth, possibly because of restiction of gas escape by the desert pavement or solution, exchange, or precipitation of carbonate, but more likely because of inefficient sealing of hoods to and below the soil surface. CO2 assay was unable to detect microbial successions. The unpredictable course of these successions, plus unpredictable relative retentions mitigates against assay of organic gases as reliable in situ detection of microbial activity, except perhaps in very alkaline environments such as Owens Lake salts.

Tew, R. W.↗
NASA NTRS1985

The Moist Available Energy of a Conditionally Unstable Atmosphere

Two simple methods for computing the moist available energy for cases in which the total number of parcels is fairly small are discussed. The first is a swapping routine that finds the reference state by exchanging parcels whenever the swap reduces the total enthalpy. However, it can be proved by contrived example that the swapping algorithm does not always find the true reference state. A second brute force routine actually examines all possible arrangements of the parcels and chooses the one with the smallest moist enthalpy. At present, both routines allow only horizontally homogeneous reference states. In an exploratory study, the swapping routine was used to find MAE and reference state for a time sequence of GATE soundings, all of which are conditionally unstable. In spot checks, the brute force routine always agreed with the swapper. Results show that in passing from the given state of the reference state the lowest three hundred mb of the atmosphere typically exchanges places with the 300 mb above it. The reference state then contains a dry warm layer near the surface, but a supersaturated but cool layer in the middle troposphere. The upper portion of the sounding is not modified in passing from the given state to the reference state.

Randall, D.↗
NASA NTRS1987

CO2: Adsorption on palagonite and the Martian regolith

Possible scenarios for the evolution of the Martian climate are discussed. In the interest of determining an upper limit on the absorptive capacity of the Martian regolith, researchers examined the results of Fanale and Cannon (1971, 1974) for CO2 adsorption on nontronite and basalt. There appeared to be a strong proportionality between the capacity of the absorbent and its specific surface area. A model of the Martian climate is given that allows the researchers to make some estimates of exchangeable CO2 abundances.

Zent, Aaron P.↗
NASA NTRS1993

Thermal Radiation Analyzer System (TRASYS)

Working alone or with SINDA '85/FLUINT, TRASYS solves radiation components of thermal analysis problems. Calculates both internode radiation exchange and incident and absorbed heat rate due to sunlight. Used in satellite design, program handles situations where one surface wholly or partially shades another from direct sunlight.

Vogt, R. A.↗
NASA NTRS1998

Investigation of EM Emissions by the Electrodynamic Tether, Inclusive of an Observational Program (EMET)

Our TSS-1/R investigation, which we shall refer to as EMET in this report, was an integral part of the effort by the TSS-1/R Investigators' Working Group (IWG) to come to an understanding of the complex interaction between the tethered satellite system and the ionosphere. All of the space-borne experiments were designed to collect data relevant to the local interaction. Only the ground- based experiments, EMET and its Italian counterpart Observations on the Earth's Surface of Electromagnetic Emissions (OESEE), held out any hope of characterizing the long range effects of the interaction. This was to be done by detecting electromagnetic waves generated by the system in the ionosphere, assuming the signal reached the Earth's surface with sufficient amplitude. As the type of plasma waves excited to carry charge away from the charge-exchange regions of the system at each end of the tether is one of the theoretical points about which there is greatest disagreement, a definitive identification of tether-generated waves could mark significant progress in the so-called current closure problem of electrodynamic tethers. Dr. Mario Grossi of the Smithsonian Astrophysical Observatory (SAO) initiated the investigation, and his experience in the field of ULF-ELF waves and their detection was invaluable throughout its course. Rice University had the responsibility of setting up the EMET ULF-VLF ground stations under a subcontract from SAO. Principal Investigator (PI) for the Rice effort was Prof. William E. Gordon, who was primary observer at the Arecibo Observatory during TSS-LR. Dr. Steve Noble handled major day-to-day operations, training, and planning for the ground-based measurements. Dr. James McCoy of NASA JSC, a member of the Mona/Arecibo team, was pilot for the numerous flights ferrying personnel and equipment between Puerto Rico and Mona Island. Final responsibility for the measurements rested with SAO, and the activities of field personnel and SAO investigators were closely co-ordinated during the mission. Dr. Enrico Lorenzini of SAO served as the eyes, ears, and brain of EMET in the Science Operations Area and PI table during the mission, whenever the PI was absent during the round-the-clock mission operations. The Rice University final report to SAO, which is included as an Appendix, contains details of the remote sites, means of communication, sensors, etc., as well as the affiliations of personnel involved in the data-gathering effort.

Estes, Robert D.↗