Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “superfluid density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Effect of strain on charge density wave order in the Holstein model

In this work, we investigate charge ordering in the Holstein model in the presence of anisotropic hopping, t x ,t y =1-δ,1+δ, as a model of the effect of strain on charge-density-wave (CDW) materials. Using quantum Monte Carlo simulations, we show that the CDW transition temperature is relatively insensitive to moderate anisotropy δ≲0.3, but begins to decrease more rapidly at δ≳0.4. However, the density correlations, as well as the kinetic energies parallel and perpendicular to the compressional axis, change significantly for moderate δ. Accompanying mean-field theory calculations show a similar qualitative structure, with the transition temperature relatively constant at small δ, and a more rapid decrease for larger strains. We also obtain the density of states N(ω), which provides clear signal of the charge ordering transition at large strain, where finite size scaling of the charge structure factor is extremely difficult because of the small value of the order parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absorption properties of type-II InAs/InAsSb superlattices measured by spectroscopic ellipsometry

Strain-balanced InAs/InAsSb superlattices offer access to the mid- to long-wavelength infrared region with what is essentially a ternary material system at the GaSb lattice constant. The absorption coefficients of InAs/InAsSb superlattices grown by molecular beam epitaxy on (100)-oriented GaSb substrates are measured at room temperature over the 30 to 800 meV photon energy range using spectroscopic ellipsometry, and the miniband structure of each superlattice is calculated using a Kronig-Penney model. The InAs/InAsSb conduction band offset is used as a fitting parameter to align the calculated superlattice ground state transition energy to the measured absorption onset at room temperature and to the photoluminescence peak energy at low temperature. It is observed that the ground state absorption coefficient and transition strength are proportional to the square of the wavefunction overlap and the ground state absorption coefficient approaches a maximum value of around 5780 cm{sup −1} as the wavefunction overlap approaches 100%. The absorption analysis of these samples indicates that the optical joint density of states is weakly dependent on the period thickness and Sb content of the superlattice, and that wavefunction overlap is the principal design parameter in terms of obtaining strong absorption in these structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extension of the general thermal field equation for nanosized emitters

During the previous decade, Jensen et al. developed a general analytical model that successfully describes electron emission from metals both in the field and thermionic regimes, as well as in the transition region. In that development, the standard image corrected triangular potential barrier was used. This barrier model is valid only for planar surfaces and therefore cannot be used in general for modern nanometric emitters. In a recent publication, the authors showed that the standard Fowler-Nordheim theory can be generalized for highly curved emitters if a quadratic term is included to the potential model. In this paper, we extend this generalization for high temperatures and include both the thermal and intermediate regimes. This is achieved by applying the general method developed by Jensen to the quadratic barrier model of our previous publication. We obtain results that are in good agreement with fully numerical calculations for radii R > 4 nm, while our calculated current density differs by a factor up to 27 from the one predicted by the Jensen's standard General-Thermal-Field (GTF) equation. Our extended GTF equation has application to modern sharp electron sources, beam simulation models, and vacuum breakdown theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Screening of remote charge scattering sites from the oxide/silicon interface of strained Si two-dimensional electron gases by an intermediate tunable shielding electron layer

We report the strong screening of the remote charge scattering sites from the oxide/semiconductor interface of buried enhancement-mode undoped Si two-dimensional electron gases (2DEGs), by introducing a tunable shielding electron layer between the 2DEG and the scattering sites. When a high density of electrons in the buried silicon quantum well exists, the tunneling of electrons from the buried layer to the surface quantum well can lead to the formation of a nearly immobile surface electron layer. The screening of the remote charges at the interface by this newly formed surface electron layer results in an increase in the mobility of the buried 2DEG. Furthermore, a significant decrease in the minimum mobile electron density of the 2DEG occurs as well. Together, these effects can reduce the increased detrimental effect of interface charges as the setback distance for the 2DEG to the surface is reduced for improved lateral confinement by top gates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recombination dynamics of a localized exciton bound at basal stacking faults within the m-plane ZnO film

We investigated the carrier dynamics near basal stacking faults (BSFs) in m-plane ZnO epitaxial film. The behaviors of the type-II quantum wells related to the BSFs are verified through time-resolved and time-integrated photoluminescence. The decay time of the emission of BSFs is observed to have a higher power law value and longer decay time than the emission of the donor-bound excitons. The spectral-dependent decay times reveal a phenomenon of carriers migrating among band tail states, which are related to the spatial distribution of the type-II quantum wells formed by the BSFs. A high density of excited carriers leads to a band bending effect, which in turn causes a blue-shift of the emission peak of BSFs with a broadened distribution of band tail states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving the efficiency of ultracold dipolar molecule formation by first loading onto an optical lattice

Ultracold ground-state dipolar {sup 40}K{sup 87}Rb molecules recently have been produced in a loose harmonic trap by employing a magnetic field sweep across a Feshbach resonance followed by stimulated Raman adiabatic passage [K.-K. Ni et al., Science 322, 231 (2008)]. The overall experimental efficiency for molecule formation was around 20%. We show that the efficiency can be increased to nearly 100% if one first loads the atomic gases into an optical lattice of the appropriate depth and tunes the interspecies attraction to have exactly one atom of each species at an occupied lattice site. Our proposed scheme provides a large enhancement to the dipolar molecule density, even at relatively high temperatures, and avoids three-body recombination loss by preventing lattice sites from being triply occupied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the charge neutrality level of poly(3-hexylthiophene)

The Al/poly(3-hexylthiophene) (P3HT) and Ag/P3HT interfaces were investigated using photoemission spectroscopy in combination with in situ thin-film deposition. The P3HT thin films were deposited directly into high vacuum from solution on the two metal substrates using an electrospray system and characterized via photoemission spectroscopy. The electronic structure and charge injection barriers at these interfaces were determined from the evaluation of the resulting spectra sequences. A linear correlation between barrier heights and substrate work functions was observed from the collected data in combination with previously published results, suggesting that the 'Induced Density of Interfaces States' model for small molecular materials is also valid for conjugated polymer interfaces. The corresponding P3HT 'screening factor' as well as its charge neutrality level was determined to be 0.48 and 3.44 eV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the band structure of InGaN/GaN quantum well on the surface plasmon enhanced light-emitting diodes

The spontaneous emission (SE) of InGaN/GaN quantum well (QW) structure with silver(Ag) coated on the n-GaN layer has been investigated by using six-by-six K-P method taking into account the electron-hole band structures, the photon density of states of surface plasmon polariton (SPP), and the evanescent fields of SPP. The SE into SPP mode can be remarkably enhanced due to the increase of electron-hole pairs near the Ag by modulating the InGaN/GaN QW structure or increasing the carrier injection. However, the ratio between the total SE rates into SPP mode and free space will approach to saturation or slightly decrease for the optimized structures with various distances between Ag film and QW layer at a high injection carrier density. Furthermore, the Ga-face QW structure has a higher SE rate than the N-face QW structure due to the overlap region of electron-hole pairs nearer to the Ag film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Au-gated SrTiO{sub 3} field-effect transistors with large electron concentration and current modulation

We report the fabrication of low-leakage rectifying Pt and Au Schottky diodes and Au-gated metal-semiconductor field effect transistors (MESFETs) on n-type SrTiO{sub 3} thin films grown by hybrid molecular beam epitaxy. In agreement with previous studies, we find that compared to Pt, Au provides a higher Schottky barrier height with SrTiO{sub 3}. As a result of the large dielectric constant of SrTiO{sub 3} and the large Schottky barrier height of Au, the Au-gated MESFETs are able to modulate ∼1.6 × 10{sup 14 }cm{sup −2} electron density, the highest modulation yet achieved using metal gates in any material system. These MESFETs modulate current densities up to ∼68 mA/mm, ∼20× times larger than the best demonstrated SrTiO{sub 3} MESFETs. We also discuss the roles of the interfacial layer, and the field-dependent dielectric constant of SrTiO{sub 3} in increasing the pinch off voltage of the MESFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sublattice modulated superconductivity in the kagome Hubbard model

Here we identify a superconducting order featuring spatial pair modulations on the kagome lattice subject to onsite Hubbard U and nearest neighbor V interactions. Within our functional renormalization group analysis, this state appears with a concomitant d-wave superconducting (SC) instability at zero lattice momentum, where it distinguishes itself through intra-unit cell modulations of the pairing function thus breaking the discrete space group symmetry. The relative weight of the sublattice modulated superconductor (SMS) and d-wave SC is influenced by the absolute interaction strength and coupling ratio V/U. Parametrically adjacent to this domain at weak coupling, we find an intra-unit cell modulated vestigial charge density wave and an s-wave SC instability. Our study provides a microscopic setting and thorough description of this novel SMS arising within a translation symmetry broken background.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Early Stage of the Explosion of Thin Flat Foils in a High-Current Diode at a Current of 40–80 kA

The initial stage of the nanosecond explosion of 1–15 μm-thick flat foils in a diode with a current of 40–80 kA is studied. Projection radiography is used to take images of exploded foils at a spatial resolution of 3–4 μm using the soft X-ray radiation (E = 2.5–5 keV) of a hybrid X-pinch and at a time resolution of 0.1 ns. Foil strips 0.3–2 mm wide and 0.5–7 mm long were introduced in the return circuit of the diode in a high-current BIN generator with a current amplitude of 270 kA and a current rise time of 100 ns; the main load of the generator is an X-pinch. The experiments demonstrate that small-scale structures, the shape and the size of which depend on the foil material and the current density and distribution in a foil, are formed in a foil. Possible scenarios of the structure formation are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical characterization of multilayer HfSe{sub 2} field-effect transistors on SiO{sub 2} substrate

We fabricated and characterized two-dimensional field-effect transistors (FETs) based on hafnium diselenide (HfSe{sub 2}) crystalline nanoflakes. The HfSe{sub 2} FET exhibits an n-type semiconductor behavior with a high on/off current ratio exceeding 7.5 × 10{sup 6}. In the temperature range of 120 K–280 K, the thermally activated transport is observed at high carrier concentrations, while at low concentrations and low temperatures hopping conduction dominates the transport mechanism. We also observed the metal insulator transition at carrier density of ∼1.8 × 10{sup 12 }cm{sup −2}. This initial report on the physical and electrical characterization of two dimensional HfSe{sub 2} material demonstrates the feasibility of this semiconducting material for electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phosphorus and carrier density of heavily n-type doped germanium

The threshold current density of n-type, tensile-strained Ge lasers strongly depends on the electron density. Although optical net gain analyses indicate that the optimum electron density should be on the order of 1 × 10{sup 20} cm{sup −3} to get the lowest threshold, it is not a simple task to increase the electron density beyond the mid range of 10{sup 19} cm{sup −3}. The present paper analyzes the phenomenon where electron density is not proportional to phosphorus donor density, i.e., “saturation” phenomenon, by applying the so-called amphoteric defect model. The analyses indicate that the saturation phenomenon can be well explained by the charge compensation between the phosphorus donors (P{sup +}) and doubly negative charged Ge vacancies (V{sup 2−}).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Langevin simulations of a long-range electron-phonon model

We present a quantum Monte Carlo (QMC) study, based on the Langevin equation, of a Hamiltonian describing electrons coupled to phonon degrees of freedom. The bosonic part of the action helps control the variation of the field in imaginary time. As a consequence, the iterative conjugate gradient solution of the fermionic action, which depends on the boson coordinates, converges more rapidly than in the case of electron-electron interactions, such as the Hubbard Hamiltonian. Fourier acceleration is shown to be a crucial ingredient in reducing the equilibration and autocorrelation times. After describing and benchmarking the method, we present results for the phase diagram focusing on the range of the electron-phonon interaction. Furthermore, we delineate the regions of charge density wave formation from those in which the fermion density is inhomogeneous, caused by phase separation. We show that the Langevin approach is more efficient than the determinant QMC method for lattice sizes N ≳ 8 × 8 and that it therefore opens a potential path to problems including, for example, charge order in the three-dimensional Holstein model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shear-horizontal surface acoustic wave phononic device with high density filling material for ultra-low power sensing applications

Finite element simulations of a phononic shear-horizontal surface acoustic wave (SAW) sensor based on ST 90°-X Quartz reveal a dramatic reduction in power consumption. The phononic sensor is realized by artificially structuring the delay path to form an acoustic meta-material comprised of a periodic microcavity array incorporating high-density materials such as tantalum or tungsten. Constructive interference of the scattered and secondary reflected waves at every microcavity interface leads to acoustic energy confinement in the high-density regions translating into reduced power loss. Tantalum filled cavities show the best performance while tungsten inclusions create a phononic bandgap. Based on our simulation results, SAW devices with tantalum filled microcavities were fabricated and shown to significantly decrease insertion loss. Our findings offer encouraging prospects for designing low power, highly sensitive portable biosensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field transients of coherent terahertz synchrotron radiation accessed via time-resolving and correlation techniques

Decaying oscillations of the electric field in repetitive pulses of coherent synchrotron radiation in the terahertz frequency range was evaluated by means of time-resolving and correlation techniques. Comparative analysis of real-time voltage transients of the electrical response and interferograms, which were obtained with an ultrafast zero-bias Schottky diode detector and a Martin-Puplett interferometer, delivers close values of the pulse duration. Consistent results were obtained via the correlation technique with a pair of Golay Cell detectors and a pair of resonant polarisation-sensitive superconducting detectors integrated on one chip. The duration of terahertz synchrotron pulses does not closely correlate with the duration of single-cycle electric field expected for the varying size of electron bunches. We largely attribute the difference to the charge density oscillations in electron bunches and to the low-frequency spectral cut-off imposed by both the synchrotron beamline and the coupling optics of our detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic and Transport Properties of YTe3, LaTe3 and CeTe3

Measurements of heat capacity, susceptibility, and electrical resistivity are presented for single crystals of the charge density wave compounds YTe{sub 3}, LaTe{sub 3}, and CeTe{sub 3}. The materials are metallic to low temperatures, but have a small density of states due to the charge density wave gapping large portions of the Fermi surface. CeTe{sub 3} is found to be a weak Kondo lattice, with an antiferromagnetic ground state and T{sub N} = 2.8 K. The electrical resistivity of all three compounds is highly anisotropic, confirming the weak dispersion perpendicular to Te planes predicted by band structure calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗