Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability constraint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Hybrid Fixed-Point Fixed-Stress Splitting Method for Linear Poroelasticity

Efficient and accurate poroelasticity models are critical in modeling geophysical problems such as oil exploration, gas-hydrate detection, and hydrogeology. We propose an efficient operator splitting method for Biot’s model of linear poroelasticity based on fixed-point iteration and constrained stress. In this method, we eliminate the constraint on time step via combining our fixed-point approach with a physics-based restraint between iterations. Three different cases are considered to demonstrate the stability and consistency of the method for constant and variable parameters. The results are validated against the results from the fully coupled approach. In case I, a single iteration is used for continuous coefficients. The relative error decreases with an increase in time. In case II, material coefficients are assumed to be linear. In the single iteration approach, the relative error grows significantly to 40% before rapidly decaying to zero. This is an artifact of the approximate solutions approaching the asymptotic solution. The error in the multiple iterations oscillates within 10 − 6 before decaying to the asymptotic solution. Nine iterations per time step are enough to achieve the relative error close to 10 − 7 . In the last case, the hybrid method with multiple iterations requires approximately 16 iterations to make the relative error 5 × 10 − 6 .

Delgado, Paul M.↗

Ringed Accretion Disks: Evolution of Double Toroidal Configurations

We investigate ringed accretion disks composed of two tori (rings) orbiting on the equatorial plane of a central supermassive Kerr black hole. We discuss the emergence of the instability phases of each ring of the macro-configuration (ringed disk) according to the Paczynski violation of mechanical equilibrium. In the full general relativistic treatment, we consider the effects of the geometry of the Kerr spacetimes relevant to the characterization of the evolution of these configurations. The discussion of ring stability in different spacetimes enables us to identify particular classes of central Kerr attractors depending on their dimensionless spin. As a result of this analysis, we set constraints on the evolutionary schemes of the ringed disks relative to the torus morphology and on their rotation relative to the central black hole and to each other. The dynamics of the unstable phases of this system is significant for the high-energy phenomena related to accretion onto supermassive black holes in active galactic nuclei and the extremely energetic phenomena in quasars, which could be observed in their X-ray emission.

79 ASTRONOMY AND ASTROPHYSICS↗

The significant impact of aerosol vertical structure on lower atmosphere stability and its critical role in aerosol–planetary boundary layer (PBL) interactions

The aerosol–planetary boundary layer (PBL) interaction was proposed as an important mechanism to stabilize the atmosphere and exacerbate surface air pollution. Despite the tremendous progress made in understanding this process, its magnitude and significance still have large uncertainties and vary largely with aerosol distribution and meteorological conditions. In this study, we focus on the role of aerosol vertical distribution in thermodynamic stability and PBL development by jointly using micropulse lidar, sun photometer, and radiosonde measurements taken in Beijing. Despite the complexity of aerosol vertical distributions, cloud-free aerosol structures can be largely classified into three types: well-mixed, decreasing with height, and inverse structures. The aerosol–PBL relationship and diurnal cycles of the PBL height and PM 2.5 associated with these different aerosol vertical structures show distinct characteristics. The vertical distribution of aerosol radiative forcing differs drastically among the three types, with strong heating in the lower, middle, and upper PBL, respectively. Such a discrepancy in the heating rate affects the atmospheric buoyancy and stability differently in the three distinct aerosol structures. Absorbing aerosols have a weaker effect of stabilizing the lower atmosphere under the decreasing structure than under the inverse structure. As a result, the aerosol–PBL interaction can be strengthened by the inverse aerosol structure and can be potentially neutralized by the decreasing structure. Moreover, aerosols can both enhance and suppress PBL stability, leading to both positive and negative feedback loops. This study attempts to improve our understanding of the aerosol–PBL interaction, showing the importance of the observational constraint of aerosol vertical distribution for simulating this interaction and consequent feedbacks.

54 ENVIRONMENTAL SCIENCES↗

Multiobjective insensitive design of airplane control systems with uncertain parameters

A multiobjective computer-aided design algorithm has been developed which minimizes the sensitivity of the design objectives to uncertainties in system parameters. The more important uncertain parameters are described by a gaussian random vector with known covariance matrix, and a vector sensitivity objective function is defined as the probabilities that the design objectives will violate specified requirements constraints. Control system parameters are found which minimize the sensitivity vector in a Pareto-optimal sense, using constrained minimization algorithms. Example results are shown for lateral stability augmentation system (SAS) design for three Shuttle flight conditions.

Schy, A. A.↗

Optimal control of singularly perturbed nonlinear systems with state-variable inequality constraints

The established necessary conditions for optimality in nonlinear control problems that involve state-variable inequality constraints are applied to a class of singularly perturbed systems. The distinguishing feature of this class of two-time-scale systems is a transformation of the state-variable inequality constraint, present in the full order problem, to a constraint involving states and controls in the reduced problem. It is shown that, when a state constraint is active in the reduced problem, the boundary layer problem can be of finite time in the stretched time variable. Thus, the usual requirement for asymptotic stability of the boundary layer system is not applicable, and cannot be used to construct approximate boundary layer solutions. Several alternative solution methods are explored and illustrated with simple examples.

Calise, A. J.↗

Modelling and design for PM/EM magnetic bearings

A mathematical model of a permanent magnet/electromagnet (PM/EM) radially active bearing is presented. The bearing is represented by both a reluctance model and a stiffness model. The reluctance model analyzes the magnetic circuit of the PM/EM bearings. By combining the two models, the performance of the bearing can be predicted given geometric dimensions, permanent magnet strength, and the parameters of the EM coils. The overall bearing design including the PM and EM design is subject to the performance requirement and physical constraints. A study of these requirements and constraints is discussed. The PM design is based on the required magnetic flux for proper geometric dimensions and magnet strength. The EM design is based on the stability and force slew rate consideration, and dictates the number of turns for the EM coils and the voltage and current of the power amplifier. An overall PM/EM bearing design methodology is proposed and a case study is also demonstrated.

Pang, D.↗

Monitoring of Earth Rotation by VLBI

Monitoring Earth rotation with Very Long Baseline Interferometry (VLBI) has unique potential because of direct access to the Celestial Reference System (CRF and Terrestrial Reference System (TRF) and the feasibility of re-analyzing the entire data set. While formal precision of better than 0.045 mas for pole and 0.002 ms for UT 1 has been seen in the best 24-hr data, the accuracy of the Earth Orientation Parameter (EOP) time series as a whole is subject to logistical, operational, analytical and conceptual constraints. The current issues related to the VLBI data set and the CORE program for greater time resolution such as analysis consistency, network jitter and reference frame stability will be discussed.

Ma., Chopo↗

Flight Control Role in RLV Configuration Development

A new optimization technique was used to aide in the selection of aerodynamic surfaces and Thrust Vectoring Control (TVC) based on maximizing control margin during ascent and entry portions of the trajectory. In order to meet the mass fraction requirement of RLV (Reusable Launch Vehicle), every substructure needed to be carefully designed to minimize the dry mass. The trajectory was designed to deliver the payload required for each mission subject to thermal and structural constraints. At each point on the trajectory the angle of attack and Mach number pair was used to calculate the control power required to trim and to stabilize the vehicle. The new optimization technique was based on finding the configuration that minimizes the control power peaks along the entire trajectory.

Youssef, Hussein↗

$R^2$/Higgs inflation and the hierarchy problem

We analyse Starobinsky inflation in the presence of the Brout Englert Higgs (BEH) boson with a non-minimal coupling to the Ricci scalar, $R$. The latter induces a coupling of the massive scaleron associated with the $R^2$ term to the BEH boson and this leads to a radiative correction to the BEH mass that must be fine tuned to keep the scalar light. For the case of $R^2$ driven inflation this requires a high level of fine tuning of order 1 part in $10^{8}$; for the case of Higgs inflation it is very much greater. We consider a scale invariant extension of the $R^2$/Higgs model and find that for $R^2$ driven inflation but not for Higgs inflation the required fine tuning is significantly reduced to one part in $10^{3-4}$. We consider the vacuum stability of the fine tuned model and its reheating and dilaton abundance after inflation. We also discuss possible gravitational wave signals associated with the model and the constraint on the mass of scalar or fermion dark matter candidates if they are produced by the gravitational couplings of the scalaron.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

R -mode Stability of GW190814's Secondary Component as a Supermassive and Superfast Pulsar

The nature of GW190814's secondary component m 2 of mass (2.50–2.67)M ⊙ in the mass gap between the currently known maximum mass of neutron stars and the minimum mass of black holes is currently under hot debate. Among the many possibilities proposed in the literature, the m 2 was suggested as a superfast pulsar while its r-mode stability against the run-away gravitational radiation through the Chandrasekhar-Friedman-Schutz mechanism is still unknown. Previously, Fortin et al. constructed a sample of 33 unified equations of state using the same nuclear interactions from the crust to the core consistently; from that sample we use those equations that fulfill all currently known astrophysical and nuclear physics constraints to compare the minimum frequency required for m 2 to rotationally sustain a mass greater than 2.50 M ⊙ with the critical frequency above which the r-mode instability occurs. Here, we use two extreme damping models assuming that the crust is either perfectly rigid or elastic. Using the stability of 19 observed low-mass X-ray binaries as an indication that the rigid crust damping of the r-mode dominates within the models studied, we find that m 2 is r-mode-stable while rotating with a frequency higher than 870.2 Hz (0.744 times its Kepler frequency of 1169.6 Hz) as long as its temperature is lower than about 3.9 × 10 7 K, further supporting the proposal that GW190814's secondary component is a supermassive and superfast pulsar.

79 ASTRONOMY AND ASTROPHYSICS↗

Continuous-flow reactor with superior production rate and stability for CO 2 reduction using semiconductor photocatalysts

Semiconductor photocatalyst approaches for solar CO 2 reduction are attractive due to their simplicity but have lagged in efficiency compared to less-integrated photoelectrochemical (PEC) approaches and to electrolysis reactors. We identify poor mass transport and catalyst deactivation as key constraints. To address them, we have developed a continuous-flow photocatalytic reactor system allowing us to control the triple-phase interface on the photocatalyst surface using the liquid and reactant gas flow rates. With the goal of selectively producing CO, the reactor is optimized by controlling the pressure and flow rates of the reactant gas and electrolyte in contact with both sides with the intermediately placed catalyst. In comparison to batch reactors with an immobile photocatalyst bed and gas phase CO 2 or CO 2 purged water, 10–24 times higher production rates are achieved for photocatalysts such as TiO 2 , ZnO, C 3 N 4 , and CdS by simply changing to the designed flow-type photoreactor without any catalyst modification. In addition, CO selectivity (93.2%) and long-term stability (>780 min) using the designed reactor are significantly enhanced compared to using the batch reactors (71.7%, <180 min for reduced 50% activity). Here, we propose that the enhanced mass transport on the photocatalyst surface accelerates the desorption of the initial photolysis product, CO, and prevents the poisoning effect from deactivating photocatalyst activity. This study has the potential to facilitate the utilization of semiconductor-based photocatalytic reactions for achieving superior performance wih gaseous reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability of the pentaquark in a naive string model

The pentaquark is studied in a simple model of confinement in which the quarks and the antiquark are linked by flux tubes of minimal cumulated length and the Coulomb-like interaction, the spin-dependent terms, and the antisymmetrization constraints are neglected. The ground state is found to be stable against spontaneous dissociation into a meson and a baryon, both in the case of five equal-mass constituents and for a static quark or antiquark surrounded by four equal masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Chapter 7: Learning Stable Local Volt/Var Controllers in Distribution Grids

This chapter describes a framework to synthesize provably stable local Volt/Var controllers for distributed energy resources (DERs) in power distribution grids (DGs). The goal is to control the reactive power injections of DERs to improve the system performance as quantified by a generic optimal reactive power flow (ORPF) problem. To achieve this, we jointly design for each DER the control function, which prescribes the reactive power update rule, and the equilibrium function, which approximates the ORPF solutions from local measurements of voltages and powers. We provide conditions on the equilibrium functions and the control parameters ensuring the stability of the closed-loop system. In particular, we discuss the trade-offs between each set of conditions accounting for practical considerations, like fully exploiting the DERs' generation capabilities and reducing the optimality gap. These conditions are then translated into learning constraints on the neural networks' parameters that are enforced in the training phase. We validate our framework with numerical simulations on the IEEE 37-bus network and through a comparison with an optimized version of standard piece wise linear control rules.

closed-loop asymptotic stability↗

Model Checking a Self-Stabilizing Distributed Clock Synchronization Protocol for Arbitrary Digraphs

This report presents the mechanical verification of a self-stabilizing distributed clock synchronization protocol for arbitrary digraphs in the absence of faults. This protocol does not rely on assumptions about the initial state of the system, other than the presence of at least one node, and no central clock or a centrally generated signal, pulse, or message is used. The system under study is an arbitrary, non-partitioned digraph ranging from fully connected to 1-connected networks of nodes while allowing for differences in the network elements. Nodes are anonymous, i.e., they do not have unique identities. There is no theoretical limit on the maximum number of participating nodes. The only constraint on the behavior of the node is that the interactions with other nodes are restricted to defined links and interfaces. This protocol deterministically converges within a time bound that is a linear function of the self-stabilization period.

Malekpour, Mahyar R.↗

Model Checking A Self-Stabilizing Synchronization Protocol for Arbitrary Digraphs

This report presents the mechanical verification of a self-stabilizing distributed clock synchronization protocol for arbitrary digraphs in the absence of faults. This protocol does not rely on assumptions about the initial state of the system, other than the presence of at least one node, and no central clock or a centrally generated signal, pulse, or message is used. The system under study is an arbitrary, non-partitioned digraph ranging from fully connected to 1-connected networks of nodes while allowing for differences in the network elements. Nodes are anonymous, i.e., they do not have unique identities. There is no theoretical limit on the maximum number of participating nodes. The only constraint on the behavior of the node is that the interactions with other nodes are restricted to defined links and interfaces. This protocol deterministically converges within a time bound that is a linear function of the self-stabilization period. A bounded model of the protocol is verified using the Symbolic Model Verifier (SMV) for a subset of digraphs. Modeling challenges of the protocol and the system are addressed. The model checking effort is focused on verifying correctness of the bounded model of the protocol as well as confirmation of claims of determinism and linear convergence with respect to the self-stabilization period.

Malekpour, Mahyar R.↗

Phase diagram of the three-dimensional subsystem toric code

Subsystem quantum error-correcting codes typically involve measuring a sequence of noncommuting parity check operators. They can sometimes exhibit greater fault tolerance than conventional codes, which use commuting checks. However, unlike subspace codes, it is unclear if subsystem codes—in particular their advantages—can be understood in terms of ground-state properties of a physical Hamiltonian. In this paper, we address this question for the three-dimensional subsystem toric code (3D STC), as recently constructed by Kubica and Vasmer [], which exhibits single-shot error correction. Motivated by a conjectured relation between single-shot properties and thermal stability, we study the zero- and finite-temperature phases of an associated noncommuting Hamiltonian. By mapping the Hamiltonian model to a pair of 3D Z 2 gauge theories coupled by a kinetic constraint, we find various phases at zero temperature, all separated by first-order transitions: There are 3D toric code-like phases with deconfined point-like excitations in the bulk, and there are phases with a confined bulk supporting a 2D toric code on the surface when appropriate boundary conditions are chosen. The latter is similar to the surface topological order present in 3D STC. However, the similarities between the single-shot correction in 3D STC and the confined phases are only partial: they share the same sets of degrees of freedom, but they are governed by different dynamical rules. Instead, we argue that the process of single-shot error correction can more suitably be associated with a path (rather than a point) in the zero-temperature phase diagram, a perspective, which inspires alternative measurement sequences enabling single-shot error correction. Moreover, since none of the above-mentioned phases survives at nonzero temperature, the single-shot error-correction property of the code does not imply thermal stability of the associated Hamiltonian phase. Published by the American Physical Society 2024

Li, Yaodong (ORCID:0000000337421944)↗

Model dynamics for quantum computing

A model master equation suitable for quantum computing dynamics is presented. In an ideal quantum computer (QC), a system of qubits evolves in time unitarily and, by virtue of their entanglement, interfere quantum mechanically to solve otherwise intractable problems. In the real situation, a QC is subject to decoherence and attenuation effects due to interaction with an environment and with possible short-term random disturbances and gate deficiencies. The stability of a QC under such attacks is a key issue for the development of realistic devices. We assume that the influence of the environment can be incorporated by a master equation that includes unitary evolution with gates, supplemented by a Lindblad term. Lindblad operators of various types are explored; namely, steady, pulsed, gate friction, and measurement operators. In the master equation, we use the Lindblad term to describe short time intrusions by random Lindblad pulses. The phenomenological master equation is then extended to include a nonlinear Beretta term that describes the evolution of a closed system with increasing entropy. An external Bath environment is stipulated by a fixed temperature in two different ways. Here we explore the case of a simple one-qubit system in preparation for generalization to multi-qubit, qutrit and hybrid qubit–qutrit systems. This model master equation can be used to test the stability of memory and the efficacy of quantum gates. The properties of such hybrid master equations are explored, with emphasis on the role of thermal equilibrium and entropy constraints. Several significant properties of time-dependent qubit evolution are revealed by this simple study. - Highlights: • General realistic density matrix evolution model shown for one qubit. • Unitary pulses & bias yield quantum gates without harmful phase accumulations. • Gate friction, dissipation included by random Lindblad noise pulses. • Bath & entropy terms yield equilibrium; test algorithms, gates act on Larmor grid. • Measurement modeled by strong, fast Lindblad pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rapid thinning of the Laurentide Ice Sheet in coastal Maine, USA, during late Heinrich Stadial 1

We report that few data are available to infer the thinning rate of the Laurentide Ice Sheet (LIS) through the last deglaciation, despite its importance for constraining past ice sheet response to climate warming. We measured 31 cosmogenic 10 Be exposure ages in samples collected on coastal mountainsides in Acadia National Park and from the slightly inland Pineo Ridge moraine complex, a ~100-km-long glaciomarine delta, to constrain the timing and rate of LIS thinning and subsequent retreat in coastal Maine. Samples collected along vertical transects in Acadia National Park have indistinguishable exposure ages over a 300 m range of elevation, suggesting that rapid, century-scale thinning occurred at 15.2 ± 0.7 ka, similar to the timing of abrupt thinning inferred from cosmogenic exposure ages at Mt. Katahdin in central Maine (Davis et al., 2015). This rapid ice sheet surface lowering, which likely occurred during the latter part of the cold Heinrich Stadial 1 event (19–14.6 ka), may have been due to enhanced ice-shelf melt and calving in the Gulf of Maine, perhaps related to regional oceanic warming associated with a weakened Atlantic Meridional Overturning Circulation at this time. The ice margin subsequently stabilized at the Pineo Ridge moraine complex until 14.5 ± 0.7 ka, near the onset of Bølling Interstadial warming. Our 10 Be ages are substantially younger than marine radiocarbon constraints on LIS retreat in the coastal lowlands, suggesting that the deglacial marine reservoir effect in this area was ~1,200 14 C years, perhaps also related to the sluggish Atlantic Meridional Overturning Circulation during Heinrich Stadial 1.

58 GEOSCIENCES↗