Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Effects of periodic unsteadiness of a rocket engine plume on the plume-induced separation shock wave

A wind tunnel investigation was conducted to study the flow field in which separation is caused by an expanding plume, with emphasis on effects associated with periodic unsteadiness in the plume. The separation shock was photographed with high speed motion pictures, from which mean shock position and excursion data are reported. Pressure fluctuations were measured beneath the separation shock and statistics of the results are reported. A response of the separation shock to plume periodic unsteadiness was identified, and the magnitude of a corresponding transfer function was defined and is reported.

Doughty, J. O.↗

High-speed helicopter rotor noise - Shock waves as a potent source of sound

In this paper we discuss the problem of high speed rotor noise prediction. In particular, we propose that from the point of view of the acoustic analogy, shocks around rotating blades are sources of sound. We show that, although for a wing at uniform steady rectilinear motion with shocks the volume quadrupole and shock sources cancel in the far field to the order of 1/r, this cannot happen for rotating blades. In this case, some cancellation between volume quadrupoles and shock sources occurs, yet the remaining shock noise contribution is still potent. A formula for shock noise prediction is presented based on mapping the deformable shock surface to a time independent region. The resulting equation is similar to Formulation 1A of Langley. Shock noise prediction for a hovering model rotor for which experimental noise data exist is presented. The comparison of measured and predicted acoustic data shows good agreement.

Farassat, F.↗

Discontinuities and shock waves in the interplanetary medium and their interaction with the magnetosphere.

The discontinuous structure of the solar wind is described with emphasis on properties related to geomagnetic impulses. Some of the discontinuities are clearly hydromagnetic shocks and tangential discontinuities, and can produce a significant change in the momentum flux at the magnetosphere boundary. Such a change generates an impulse which propagates through the magnetosphere to the earth where it is observed world-wide as an impulse in magnetograms. The propagation process is not reviewed here, but the relation between the initial cause (discontinuity) and the final effect (geomagnetic impulse) is reviewed in detail. The various types of impulses are examined, and are related qualitatively to the various types of discontinuities. The magnitude of an impulse is related to the change in the momentum flux. The propagation time and the rise time depend on the propagation process rather than on the initial state.

Burlaga, L. F.↗

Direct measurements of wall shear stress by buried wire gages in a shock-wave boundary-layer interaction region

Detailed measurements of wall shear stress (skin friction) were made with specially developed buried wire gages in the interaction regions of a Mach 2.9 turbulent boundary layer with externally generated shocks. Separation and reattachment points inferred by these measurements support the findings of earlier experiments which used a surface oil flow technique and pitot profile measurements. The measurements further indicate that the boundary layer tends to attain significantly higher skin-friction values downstream of the interaction region as compared to upstream. Comparisons between measured wall shear stress and published results of some theoretical calculation schemes show that the general, but not detailed, behavior is predicted well by such schemes.

Murthy, V. S.↗

Numerical computation of transonic flows with shock waves

Some recent developments in numerical methods for calculating solutions to the transonic potential flow equation are reviewed, including (1) the construction of the stable coordinate independent difference schemes; (2) the use of conservation form to insure proper shock jump conditions; (3) analysis of the relaxation method by the time dependent analogy; (4) accelerated iterative schemes.

Jameson, A.↗

Shock-Wave/Boundary-Layer Interactions in Hypersonic Low Density Flows

Results of numerical simulations of Mach 10 air flow over a hollow cylinder-flare and a double-cone are presented where viscous effects are significant. The flow phenomena include shock-shock and shock- boundary-layer interactions with accompanying flow separation, recirculation, and reattachment. The purpose of this study is to promote an understanding of the fundamental gas dynamics resulting from such complex interactions and to clarify the requirements for meaningful simulations of such flows when using the direct simulation Monte Carlo (DSMC) method. Particular emphasis is placed on the sensitivity of computed results to grid resolution. Comparisons of the DSMC results for the hollow cylinder-flare (30 deg.) configuration are made with the results of experimental measurements conducted in the ONERA RSCh wind tunnel for heating, pressure, and the extent of separation. Agreement between computations and measurements for various quantities is good except that for pressure. For the same flow conditions, the double- cone geometry (25 deg.- 65 deg.) produces much stronger interactions, and these interactions are investigated numerically using both DSMC and Navier-Stokes codes. For the double-cone computations, a two orders of magnitude variation in free-stream density (with Reynolds numbers from 247 to 24,7 19) is investigated using both computational methods. For this range of flow conditions, the computational results are in qualitative agreement for the extent of separation with the DSMC method always predicting a smaller separation region. Results from the Navier-Stokes calculations suggest that the flow for the highest density double-cone case may be unsteady; however, the DSMC solution does not show evidence of unsteadiness.

Moss, James N.↗

Uncertainty Assessments of 2D and Axisymmetric Hypersonic Shock Wave - Turbulent Boundary Layer Interaction Simulations at Compression Corners

This paper is one of a series of five papers in a special session organized by the NASA Fundamental Aeronautics Program that addresses uncertainty assessments for CFD simulations in hypersonic flow. Simulations of a shock emanating from a compression corner and interacting with a fully developed turbulent boundary layer are evaluated herein. Mission relevant conditions at Mach 7 and Mach 14 are defined for a pre-compression ramp of a scramjet powered vehicle. Three compression angles are defined, the smallest to avoid separation losses and the largest to force a separated flow engaging more complicated flow physics. The Baldwin-Lomax and the Cebeci-Smith algebraic models, the one-equation Spalart-Allmaras model with the Catrix-Aupoix compressibility modification and two-equation models including Menter SST, Wilcox k-omega 98, and Wilcox k-omega 06 turbulence models are evaluated. Each model is fully defined herein to preclude any ambiguity regarding model implementation. Comparisons are made to existing experimental data and Van Driest theory to provide preliminary assessment of model form uncertainty. A set of coarse grained uncertainty metrics are defined to capture essential differences among turbulence models. Except for the inability of algebraic models to converge for some separated flows there is no clearly superior model as judged by these metrics. A preliminary metric for the numerical component of uncertainty in shock-turbulent-boundary-layer interactions at compression corners sufficiently steep to cause separation is defined as 55%. This value is a median of differences with experimental data averaged for peak pressure and heating and for extent of separation captured in new, grid-converged solutions presented here. This value is consistent with existing results in a literature review of hypersonic shock-turbulent-boundary-layer interactions by Roy and Blottner and with more recent computations of MacLean.

Gnoffo, Peter A.↗

Cosmic ray drift, shock wave acceleration and the anomalous component of cosmic rays

A model of the anomalous component of the quiet-time cosmic ray flux is presented in which ex-interstellar neutral particles are accelerated continuously in the polar regions of the solar-wind termination shock, and then drift into the equatorial regions of the inner heliosphere. The observed solar-cycle variations, radial gradient, and apparent latitude gradient of the anomalous component are a natural consequence of this model.

Pesses, M. E.↗

Cosmic ray drift, shock wave acceleration, and the anomalous component of cosmic rays

A model of the anomalous component of the quiet-time cosmic ray flux is presented in which ex-interstellar neutral particles are accelerated continuously in the polar regions of the solar-wind termination shock and then drift into the equatorial regions of the inner heliosphere. The observed solar-cycle variations, radial gradient, and apparent latitude gradient of the anomalous component are a natural consequence of this model.

Pesses, M. E.↗

Dynamic response of shock waves in transonic diffuser and supersonic inlet - An analysis with the Navier-Stokes equations and adaptive grid

An existing method which solves the multi-dimensional ensemble-averaged compressible time-dependent Navier-Stokes equations in conjunction with mixing length turbulence model and shock capturing technique has been extended to include the shock-tracking adaptive grid systems. The numerical scheme for solving the governing equations is based on a linearized block implicit approach. The effects of grid-motion and grid-distribution on the calculated flow solutions have been studied in relative detail and this is carried out in the context of physically steady, shocked flows computed with non-stationary grids. Subsequently, the unsteady dynamics of the flows occurring in a supercritically operated transonic diffuser and a mixed compression supersonic inlet have been investigated with the adaptive grid systems by solving the Navier-Stokes equations.

Liu, N.-S.↗

Essentially nonoscillatory spectral Fourier methods for shock wave calculations

An essentially nonoscillatory spectral Fourier method for the solution of hyperbolic partial differential equations is presented. The method is based on adding a nonsmooth function to the trigonometric polynomials which are the usual basis functions for the Fourier method. The high accuracy away from the shock is enhanced by using filters. Numerical results confirm that essentially no oscillations develop in the solution.

Cai, Wei↗

Non-oscillatory spectral Fourier methods for shock wave calculations

A non-oscillatory spectral Fourier method is presented for the solution of hyperbolic partial differential equations. The method is based on adding a nonsmooth function to the trigonometric polynomials which are the usual basis functions for the Fourier method. The high accuracy away from the shock is enhanced by using filters. Numerical results confirm that no oscillations develop in the solution. Also, the accuracy of the spectral solution of the inviscid Burgers equation is shown to be higher than a fixed order.

Cai, Wei↗

Investigation of the stall-induced shock wave (hammershock) at the inlet to the engine

The peak static pressures measured at the inlet to the engine during stall are presented for a turbojet and two turbofan engines. It is shown for one turbofan and the turbojet that the static pressure ratio across the hammershock does not exceed significantly the normal shock pressure ratio necessary to stop the flow. The second turbofan engine did not follow this rule. Possible reasons for the departure are discussed. For the two turbofan engines the influence of the stall method on the hammershock intensity was investigated. Data related to the spatial distribution of pressure in the hammershock are also presented.

Kurkov, A. P.↗

Investigation of the stall-induced shock wave /hammershock/ at the inlet to the engine

The peak static pressures measured at the inlet to the engine during stall are presented for a turbojet and two turbofan engines. It is shown for one turbofan and the turbojet that the static pressure ratio across the hammershock does not exceed significantly the normal shock pressure ratio necessary to stop the flow. The second turbofan engine did not follow this rule. Possible reasons for the departure are discussed. For the two turbofan engines, the influence of the stall method on the hammershock intensity has been investigated. Data related to the spatial distribution of pressure in the hammershock are also presented.

Kurkov, A. P.↗

Shock waves generated by the intense solar flare of 1972, August 7, 15:00 UT

The dynamic radio spectrum of the class 3B solar flare of 1972, August 7, 15:00 UT, over the band 10 to 2000 MHz is examined. Type II and type IV bursts in the spectrum are interpreted in terms of a piston-driven shock, which appeared to be traveling at a velocity of about 1500 km per sec and which generated pulsations in the band 100 to 200 MHz as it passed through the corona. The progress of the shock through the interplanetary plasma was subsequently monitored by Malitson et al. with radio equipment covering the band 0.03 to 2.6 MHz on the IMP-6 satellite.

Maxwell, A.↗

Association between interplanetary shock waves and delayed solar particle events.

In studying the propagation of energetic charged particles from a large solar flare, we can no longer regard the interplanetary medium as remaining in a steady state; disturbances in the flow of solar wind from these flares may have great effects on the observed fluxes of charged particles. Delayed particle events, also known as 'energetic storm particle' events, may exhibit an increase by an order of magnitude or greater in the flux of protons above 10 MeV over a period of the order of 6 hours. These events are seen in association with the passage of an interplanetary shock past the earth. It is proposed that the particles are accelerated locally at the time of the passage of the interplanetary blast wave.

Datlowe, D.↗

Molecule formation and infrared emission in fast interstellar shocks. II - Dissociation speeds for interstellar shock waves

The postshock destruction of molecules is examined, including the processes of (1) collisions with neutral hydrogen atoms and molecules, (2) electronic collisions, and (3) neutral chemical reactions with atoms, particularly atomic hydrogen. By using conservative estimates of collisional dissociation rates from individual vibrational states, it is found that process (1) leads to the destruction of molecular hydrogen behind shocks with speeds equal to or greater than 25 km/s if the preshock molecular gas has hydrogen nucleus densities of equal to or greater than 10 to the 4th/cu cm. At lower densities (100 per cu cm), destruction occurs for shock speeds equal to or greater than 50 km/s and process (2) dominates. Dissociation of molecules such as CO, H2O, and O2 follows the destruction of H2, as the resultant hydrogen atoms chemically dissociate the metal atoms from their bonds (process 3) in the hot postshock gas. These results demonstrate that many of the observed high-speed interstellar molecules, if shock accelerated, must have dissociated and reformed in the postshock gas.

Hollenbach, D.↗

Shock wave properties of anorthosite and gabbro

Hugoniot data on San Gabriel anorthosite and San Marcos gabbro to 11 GPA are presented. Release paths in the stress-density plane and sound velocities are reported as determined from particl velocity data. Electrical interference effects precluded the determination of accurate release paths for the gabbro. Because of the loss of shear strength in the shocked state, the plastic behavior exhibited by anorthosite indicates that calculations of energy partitioning due to impact onto planetary surfaces based on elastic-plastic models may underestimate the amount of internal energy deposited in the impacted surface material.

Boslough, M. B.↗