Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Design considerations of highly efficient D-shaped plasmonic biosensor

Design considerations of photonic crystal fiber (PCF) surface plasmon biosensor with high sensitivity to monitor glucose concentration is reported and studied. Based on a well-known large mode area (LMA) single mode PCF, two different configurations have been studied to investigate the impact of the etching process on the biosensor sensitivity. Furthermore, the possibility of infiltrating one hole by a plasmonic material to increases the biosensor sensitivity is studied. A full vectorial finite element method (FVFEM) is used to carry out the analysis of the reported biosensor. In addition, the geometrical parameters of the suggested biosensors have been optimized to obtain the highest sensitivity. The suggested biosensor based on a D-shaped PCF with plasmonic rod achieves sensitivity as high as 13,600 nm/RIU with corresponding resolution of 7.35×10{sup −6} RIU.The analysis also reveals that the proposed biosensor has a linear performance which is needed practically. Therefore, the reported biosensor has advantages in terms of fabrication feasibility and high linear sensitivity.

36 MATERIALS SCIENCE↗

Stochastic Programming Approach for Resource Selection under Demand Uncertainty

Cost-efficient selection and scheduling of a subset of geographically distributed resources to meet the demands of a scientific workflow is a challenging problem. The problem is exacerbated by uncertainties in demand and availability of resources. In this paper, we present a stochastic optimization based framework for robust decision making in the selection of distributed resources over a planning horizon under demand uncertainty. We present a novel two-stage stochastic programming model for resource selection, and implement an L-shaped decomposition algorithm to solve this model. A Sample Average Approximation algorithm is integrated to enable stochastic optimization to solve problems with a large number of scenarios. Using the metric of stochastic solution, we demonstrate up to 30% cost reduction relative to solutions without explicit consideration of demand uncertainty for a 24-month problem. We also demonstrate up to 54% cost reduction relative to a previously developed solution for a 36-month problem. We further argue that the composition of resources selected is superior to solutions computed without explicit consideration of uncertainties. Given the importance of resource selection and scheduling of complex scientific workflows, especially in the context of commercial cloud computing, we believe that our novel stochastic programming framework will benefit many researchers as well as users of distributed computing resources.

scientific workflows, task scheduling, optimizatio↗

SPECTER: efficient evaluation of the spectral EMD

The Energy Mover’s Distance (EMD) has seen use in collider physics as a metric between events and as a geometric method of defining infrared and collinear safe observables. Recently, the Spectral Energy Mover’s Distance (SEMD) has been proposed as a more analytically tractable alternative to the EMD. In this work, we obtain a closed-form expression for the Riemannian-like p = 2 SEMD metric between events, eliminating the need to numerically solve an optimal transport problem. Additionally, we show how the SEMD can be used to define event and jet shape observables by minimizing the distance between events and parameterized energy flows (similar to the EMD), and we obtain closed-form expressions for several of these observables. We also present the Specter framework, an efficient and highly parallelized implementation of the SEMD metric and SEMD-derived shape observables as an analogue of the previously-introduced Shaper for EMD-based computations. We demonstrate that computing the SEMD with Specter can be up to a thousand times faster than computing the EMD with standard optimal transport libraries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Maximizing Brightness in Photoinjectors

If the laser pulse driving photoinjectors could be arbitrarily shaped, the emittance growth induced by space charge effects could be totally compensated for. In particular, for RF guns the photo-electron distribution leaving the cathode should have a 3D-ellipsoidal shape. The emittance at the end of the injector could be as small as the cathode emittance. We explore how the emittance and the brightness can be optimized for photoinjector based on RF gun depending on the peak current requirements. Techniques available to produce those ideal laser pulse shapes are also discussed. If the laser pulse driving photoinjectors could be arbitrarily shaped, the emittance growth induced by space charge effects could be totally compensated for. In particular, for RF guns, the photo-electron distribution leaving the cathode should be close to a uniform distribution contained in a 3D-ellipsoid contour. For photo-cathodes which have very fast emission times, and assuming a perfectly uniform emitting surface, this could be achieved by shaping the laser in a pulse of constant fluence and limited in space by a 3D-ellipsoid contour. Simulations show that in such conditions, with the standard linear emittance compensation, the emittance at the end of the photo-injector beamline approaches the minimum value imposed by the cathode emittance. Brightness, which is expressed as the ratio of peak current over the product of the two transverse emittance, seems to be maximized for small charges. Numerical simulations also show that for very high charge per bunch (10nC), emittances as small as 2 mm-mrad could be reached by using 3D-ellipsoidal laser pulses in an S-Band gun. The production of 3D-ellipsoidal pulses is very challenging, but seems worthwhile the effort. We briefly discuss some of the present ideas and difficulties of achieving such pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Routes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile

Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating (ECRH) and, in some cases, with low power of ECRH after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m −3 .

high performance plasma↗

Invertible Neural Networks for Aerodynamic Design of Wind Turbine Blades

The state-of-the-practice methods for aerodynamic design of wind turbine blads use linearized blade element momentum theory (BEM) to optimize the twist and chord profiles from a pre-selected set of 2D airfoil shapes. In this work, we apply invertible neural network (INN) tools to enable the rapid inverse aerodynamic design of wind turbine blades including component airfoils. The INN is trained on data obtained through the use of robust automated mesh generation and the HAMSTR computational fluid dynamics solver with advanced turbulence and transition models validated for turbine applications. Our design technique is a significant improvement over the state-of-the-practice linearized blade element momentum (BEM) techniques in capturing 3D nonlinear aerodynamic effects that are critical for optimal design of the rotors. This is made possible by developing sparse, invertible neural networks (INNs) for inverse design and optimization that realize a 100x cost reduction compared to adjoint-based computational fluid dynamics (CFD) approaches, while enabling increased robustness of the final design. We demonstrate the INN tool for design of a section of the NREL 5-MW blade. All generated shapes satisfy the desired aerodynamic characteristics, demonstrating the success of the INN approach for inverse design of wind turbine blades.

aerodynamic design↗

TH-A-9A-06: Inverse Planning of Gamma Knife Radiosurgery Using Natural Physical Models

Purpose: Treatment-planning systems rely on computer intensive optimization algorithms in order to provide radiation dose localization. We are investigating a new optimization paradigm based on natural physical modeling and simulations, which tend to evolve in time and find the minimum energy state. In our research, we aim to match physical models with radiation therapy inverse planning problems, where the minimum energy state coincides with the optimal solution. As a prototype study, we have modeled the inverse planning of Gamma Knife radiosurgery using the dynamic interactions between charged particles and demonstrate the potential of the paradigm. Methods: For inverse planning of Gamma Knife radiosurgery: (1) positive charges are uniformly placed on the surface of tumors and critical structures. (2) The Gamma Knife dose kernels of 4mm, 8mm and 16mm radii are modeled as geometric objects with variable charges. (3) The number of shots per each kernel radii is obtained by solving a constrained integer-linear problem. (4) The shots are placed into the tumor volume and move under electrostatic forces. The simulation is performed until internal forces are zero or maximum iterations are reached. (5) Finally, non-negative least squares (NNLS) is used to calculate the beam-on times for each shot. Results: A 3D C-shaped tumor surrounding a spherical critical structure was used for testing the new optimization paradigm. These tests showed that charges spread out evenly covering the tumor while keeping distance from the critical structure, resulting in a high quality plan. Conclusion: We have developed a new paradigm for dose optimization based on the simulation of physical models. As prototype studies, we applied electrostatic models to Gamma Knife radiosurgery and demonstrated the potential of the new paradigm. Further research and fine-tuning of the model are underway. NSF CBET-0853157.

60 APPLIED LIFE SCIENCES↗

Combining PCA and nonlinear fitting of peak models to re-evaluate C 1s XPS spectrum of cellulose

Cellulose is an example of a material that responds to XPS by the creation of new chemistry not present in the as-received sample. While improvements in instrumentation may be seen in general as beneficial to surface science, recent studies have shown that the consequences for some materials are detrimental. Here, in this work, these problems are illustrated through an analysis of cellulose spectra obtained during a degradation study. C 1s spectra are decomposed into two well-formed component curves that are open to chemical interpretation. In particular, a component-curve representative of pure cellulose is obtained as well as a second component curve that implies cellulose is degraded through the creation of carbon chemistry involving C—O, C$=$O and O—C$=$O. Since cellulose is a crystalline material, formed through the alignment of molecules under the influence of hydrogen bonds, the analysis and findings presented in this paper are relevant to any material analyzed by XPS whose properties are dependent on hydrogen bonds. The analysis techniques are based on an informed vectorial approach, which extracts directly from data spectral shapes that are used to monitor sample degradation via linear least squares optimization. Related mathematics of Principal Component Analysis and linear analysis are presented.

36 MATERIALS SCIENCE↗

Computational and Experimental Evaluation of Peroxide Oxidants for Amine-Peroxide Redox Polymerization

Amine–peroxide redox polymerization (APRP) is the prevalent method for producing radical-based polymers in the many industrial and medical applications where light or heat activation is impractical. We recently developed a detailed description of the APRP initiation process through a combined computational and experimental effort to show that APRP proceeds through SN2 attack by the amine on the peroxide, followed by the rate-determining homolysis of the resulting intermediate. Using this new mechanistic understanding, a variety of peroxides were computationally predicted to initiate APRP with fast kinetics. In particular, the rate of APRP initiation can be improved by radical and anion stabilization through increased p-electron conjugation or by increasing the electrophilicity of the peroxy bond through the addition of electron-withdrawing groups. On the other hand, the addition of electron-donating groups lowered the initiation rate. These design principles enabled the computational prediction of several new peroxides that exhibited improved initiation rates over the commonly used benzoyl peroxide. For example, the addition of nitro groups (NO2) to the para positions of benzoyl peroxide resulted in a theoretical radical generation rate of 1.9 × 10–9 s–1, which is ~150 times faster than the 1.3 × 10–11 s–1 radical generation rate observed with unsubstituted benzoyl peroxide. These accelerated kinetics enabled the development of a redox-based direct-writing process that exploited the extremely rapid reactivity of an optimized redox pair with a custom inkjet printer, capable of printing custom shapes from polymerizing resins without heat or light. Furthermore, the application of more rapid APRP kinetics could enable the acceleration of existing industrial processes, make new industrial manufacturing methods possible, and improve APRP compatibility with biomedical applications through reduced initiator concentrations that still produce rapid polymerization rates.

functional polymers↗

Architecting the Third Dimension of Electrochemical Energy Storage

Three-dimensional (3D) architectural design has emerged as a powerful strategy to push electrochemical energy storage (EES) devices beyond the intrinsic limitations of conventional two-dimensional (2D) electrodes. While planar architectures enable high packing density and mature manufacturing, they suffer from limited ion transport and low active-material loading. In contrast, 3D architectures introduce low-tortuosity networks and high surface area that enhance charge and mass transport while supporting thick, high mass-loading electrodes. However, their practicality remains hindered by challenges in volumetric density, mechanical stability, and large-scale manufacturability. Here, this Perspective examines the key evaluation and design principles that govern 3D device performance. We discuss the fundamental trade-offs between porosity, volumetric density, and mechanical stability that shape 3D design and highlight emerging strategies for integrating materials engineering, structural optimization, device integration, computational modeling, and scalable manufacturing. By aligning structural functionality with manufacturability, 3D architectures can evolve from laboratory prototypes to commercially viable energy storage systems.

25 ENERGY STORAGE↗

The long road to ignition: An eyewitness account

This paper reviews the many twists and turns in the long journey that culminated in ignition in late 2022 using the laser heated indirect-drive approach to imploding DT filled targets at the National Ignition Facility (NIF), located at the Lawrence Livermore National Laboratory (LLNL). We describe the early origins of the Laser Program at LLNL and key developments such as the paradigm shifting birth of high energy density physics (HEDP) studies with lasers, changes in choice of laser wavelength, and the development of key diagnostics and computer codes. Fulfilling the requirements of the multi-faceted Nova Technical Contract was a necessary condition for the approval of the NIF, but more importantly, the end of the Cold War and the cessation of nuclear testing were key catalysts in that approval, along with the ready-and-waiting field of HEDP. The inherent flexibility of the field of laser driven inertial confinement fusion played a fundamental role in achieving success at the NIF. We describe how the ultimately successful ignition target design evolved from the original “point design” target, through the lessons of experiment. All key aspects of that original design changed: The capsule's materials and size were changed; the hohlraum's materials, size, laser entrance hole size, and gas fills were also all changed, as were the laser pulse shapes that go along with all those changes. The philosophy to globally optimize performance for stability (by raising the adiabat and thus lowering the implosion convergence) was also key, as was progress in target fabrication, and in increasing NIF's energy output. The persistence of the research staff and the steadfast backing of our supporters were also necessary elements in this success. We gratefully acknowledge seven decades of researcher endeavors and four decades of the dedicated efforts of many hundreds of personnel across the globe who have participated in NIF construction, operation, target fabrication, diagnostic, and theoretical advances that have culminated in ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increasing the power of weak lensing data with multipole-based intrinsic alignment estimators

ABSTRACT It has long been known that galaxy shapes align coherently with the large-scale density field. Characterizing this effect is essential to interpreting measurements of weak gravitational lensing, the deflection of light from distant galaxies by matter overdensities along the line of sight, as it also produces coherent galaxy alignments that we wish to interpret in terms of a cosmological model. Existing direct measurements of intrinsic alignments using galaxy samples with high-quality shape and redshift measurements typically use well-understood but sub-optimal projected estimators, which do not make good use of the information in the data when comparing those estimators to theoretical models. We demonstrate a more optimal estimator, based on a multipole expansion of the correlation functions or power spectra, for direct measurements of galaxy intrinsic alignments. We show that even using the lowest order multipole alone increases the significance of inferred model parameters using simulated and real data, without any additional modelling complexity. We apply this estimator to measurements of parameters of the non-linear alignment model using data from the Sloan Digital Sky survey, demonstrating consistent results with a factor of ∼2 greater precision in parameter fits to intrinsic alignments models. This result is functionally equivalent to quadrupling the survey area, but without the attendant costs – thereby demonstrating the value in using this new estimator in current and future intrinsic alignments measurements using spectroscopic galaxy samples.

Astronomy & Astrophysics↗

Combined Dimensional and Topology Optimization of Synchronous Machine Rotors Using a Material Density Interpolation Method

This article presents a magneto-structural combined dimensional and topology optimization technique for interior permanent magnet synchronous machine (IPMSM) and wound field synchronous machine (WFSM) rotors. Dimensional changes to the permanent magnet (PM) and rotor winding location or size are accomplished by interpolating or projecting a smoothed Heaviside rectangular function representing the presence of PM material onto the IPMSM rotor design domain mesh, whereas the presence of copper material for WFSM rotor is interpolated in the same manner. A density based Solid Isotropic Material with Penalization (SIMP) topology optimization approach is then used to vary the presence of electrical steel in mesh elements to form flux barriers around the PM. The proposed method enforces a defined shape for the PM without requiring the mesh in the design domain to be deformed. Four examples are presented to demonstrate the technique: Two flat bar IPMSM, one V-shaped IPMSM, and a WFSM. Here, a comparative study is performed on one of the flat bar IPMSMs using Metamodel of Optimal Prognosis (MOP) based method.

33 ADVANCED PROPULSION SYSTEMS↗

Purification and SAXS Analysis of the Integrin Linked Kinase, PINCH, Parvin (IPP) Heterotrimeric Complex

The heterotrimeric protein complex containing the integrin linked kinase (ILK), parvin, and PINCH proteins, termed the IPP complex, is an essential component of focal adhesions, where it interacts with many proteins to mediate signaling from integrin adhesion receptors. Here we conduct a biochemical and structural analysis of the minimal IPP complex, comprising full-length human ILK, the LIM1 domain of PINCH1, and the CH2 domain of α-parvin. We provide a detailed purification protocol for IPP and show that the purified IPP complex is stable and monodisperse in solution. Using small-angle X-ray scattering (SAXS), we also conduct the first structural characterization of IPP, which reveals an elongated shape with dimensions 120×60×40 Å. Flexibility analysis using the ensemble optimization method (EOM) is consistent with an IPP complex structure with limited flexibility, raising the possibility that inter-domain interactions exist. However, our studies suggest that the inter-domain linker in ILK is accessible and we detect no inter-domain contacts by gel filtration analysis. This study provides a structural foundation to understand the conformational restraints that govern the IPP complex.

59 BASIC BIOLOGICAL SCIENCES↗

IMIGO: An Optimal Adaptive Nonlinear Program for Accelerator Optics Modeling and Other Applications

Model-based electron accelerator control is the maintenance of optimal parameters of an electron beam such as its orbit, size, and shape, as well as machine parameters such as tunes. It works well when the model reflects reality. SLAC pioneered this technique in SPEAR about thirty decades ago. Similar techniques are now employed in particle accelerator and synchrotron laboratories around the world. There is still an inherently complex problem related to the employment of such techniques to manage the operation and analysis of accelerators and storage rings. The problem arises from the use by those techniques of complex numerical algorithms commonly known as nonlinear solvers that are difficult to control and operate. Lessons learned at SLAC have led to the development of a new, simple-to-use, and iterative nonlinear solver that holds much promise not only in advancing the derivation of errors in accelerators and storage rings at SLAC, but also in its ability to tackle a range of complex engineering problems. A CRADA project was recently completed to build on this experience at SLAC, and to collaborate with an outside company GO AI Services to further develop and validate this nonlinear solver for robust SLAC accelerator. In this report, we present the project report submitted to DOE and SLAC.

Accelerators↗

All-Digital Time-Resolved Spot Diagnostic

Presentation describes research into construction of a time-resolved spot diagnostic using mostly commercial off-the-shelf components, with system requirements to include (among others) comparable or better signal-to-noise ratio than a streak camera; low-loss fiber network, likely less than a few dB; optimized interface to the scintillators; and fast detectors to capture the pulse shape, 500 MHz to 1 GHz analog bandwidth with good linearity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Growth interface study of CdTeSe crystals grown by the THM technique

The Traveling Heater Method (THM) is a widely accepted technique to grow high-quality detector grade CdTe and CdZnTe ingots, especially for X-ray and gamma-ray detector applications. Unlike melt-growth techniques, the growth interface for ingots produced by the THM technique consists of two different compounds, viz. the solidified region (just below the interface) consists of the compound to be grown (e.g., CdZnTe for CdZnTe growth), while the molten zone just above the growth interface consists of Te-rich CdZnTe. Thus, optimization of the growth parameters is critical to obtain a clean growth interface with the required shape and presence of minimal Te-rich inclusions. Here, in this study, CdTeSe ingots were grown employing the THM technique to investigate the growth interface. Both macroscopic and microscopic behavior of the interface were studied. The study revealed that a microscopically smooth growth interface can be achieved by optimizing the growth parameters, which is essential for obtaining high-quality, inclusion-free ingots.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Manipulating strong electromagnetic fields with the average transverse momentum of relativistic nuclear collisions

Abstract We show that an event-shape engineering based on the mean transverse momentum of charged hadrons, $$[p_t]$$ [ p t ] , provides an optimal handle on the strength of the magnetic field created in central heavy-ion collisions at high energy. This is established through quantitative evaluations of the correlation existing between the event-by-event magnetic field produced by the spectator protons in 5.02 TeV Pb + Pb collisions and the event-by-event $$[p_t]$$ [ p t ] at a given collision centrality. We argue that the event selection based on $$[p_t]$$ [ p t ] provides a better handle on the magnetic field than the more traditional selection based on the event ellipticities. Advantages brought by this new method for the experimental search of the chiral magnetic effect are discussed.

Giacalone, Giuliano (ORCID:0000000287761034)↗