Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Identification, definition and mapping of terrestrial ecosystems in interior Alaska

The author has identified the following significant results. A reconstituted color infrared image covering the western Seward Peninsula was used for identifying vegetation types by simple visual examination. The image was taken by ERTS-1 approximately 1120 hours on August 1, 1972. Seven major colors were identified. Four of these were matched with four units on existing vegetation maps: bright red - shrub thicket; light gray-red - upland tundra; medium gray-red - coastal wet tundra; gray - alpine barrens. In the bright red color, two phases, violet and orange, were recognized and tentatively ascribed to differences in species composition in the shrub thicket type. The three colors which had no map unit equivalents were interpreted as follows: pink - grassland tundra; dark gray-red - burn scars; light orange-red - senescent vegetation. It was concluded that the image provides a considerable amount of information regarding the distribution of vegetation types, even at so simple a leval of analysis. It was also concluded that sequential imagery of this type could provide useful information on vegetation fires and phenologic events.

Anderson, J. H.↗

Monthly and annual percentage levels of wind speed differences computed by using FPS-16 radar/Jimsphere wind profile data from Cape Kennedy, Florida

The percentage levels of wind speed differences are presented computed from sequential FPS-16 radar/Jimsphere wind profiles. The results are based on monthly profiles obtained from December 1964 to July 1970 at Cape Kennedy, Florida. The profile sequences contain a series of three to ten Jimspheres released at approximately 1.5-hour intervals. The results given are the persistence analysis of wind speed difference at 1.5-hour intervals to a maximum time interval of 12 hours. The monthly percentage of wind speed differences and the annual percentage of wind speed differences are tabulated. The percentage levels are based on the scalar wind speed changes calculated over an altitude interval of approximately 50 meters and printed out every 25 meters as a function of initial wind speed within each five-kilometer layer from near sea level to 20 km. In addition, analyses were made of the wind speed difference for the 0.2 to 1 km layer as an aid for studies associated with take-off and landing of the space shuttle.

Susko, M.↗

Combined environmental stresses

Tolerance levels, physiological effects, and performance degradation during simultaneous or sequential exposures to two environmental stresses, and also three or more simultaneous stresses are described. Environmental stress combinations are characterized by four descriptors: order of occurrence, duration of exposure, severity of exposure, and type of interaction. Combined stress data and facilities for combined stress study are briefly mentioned.

Murray, R. H.↗

Tides and tsunamis

Although tides and tsunamis are both shallow water waves, it does not follow that they are equally amenable to an observational program using an orbiting altimeter on a satellite. A numerical feasibility investigation using a hypothetical satellite orbit, real tide observations, and sequentially increased levels of white noise has been conducted to study the degradation of the tidal harmonic constants caused by adding noise to the tide data. Tsunami waves, possibly a foot high and one hundred miles long, must be measured in individual orbits, thus requiring high relative resolution.

Zetler, B. D.↗

All digital precision processing of ERTS images

The author has identified the following significant results. Experimentation was conducted to evaluate the performance of the Sequential Similarity Detection Algorithm (SSDA) to detect and locate ground central points (GCP) automatically using MSS data. Recent experiments with ERTS data having a temporal separation of from 17 to 72 days between the search area and the GCP have shown that the algorithm can find the GCP's and with an overall probability of 88%. Band 5 appears to give the best results. A modified reseau detection algorithm has been applied to 2 RBV scenes separated by a 12 day period. The algorithm correctly located all 486 reseaus. No false reseaus were located in a companion experiment. Changes in apparent reseau position, due to camera characteristics, were never greater than 3 picture elements in either axis. The positional error of a geometrically corrected image has been predicted by the use of an APL program. The maximum deviation of the GCP's from true UTM coordinate position was computed to be 190 meters. The RMS positional error of all GCP's was 106 meters. Further refinement of the algorithm is expected to reduce the errors.

Bernstein, R.↗

Application of ERTS-1 data to the protection and management of New Jersey's coastal environment

The author has identified the following significant results. This catalogue was prepared as a part of the joint ERTS-1 New Jersey coastal mapping experiment. First look analysis of ERTS-1 images indicates that numerous coastal oceanographic patterns can be mapped on a sequential basis using ERTS-1 images. Analysis of imagery indicates a predominant southwesterly drift of dumped wasted in the surface waters. Initial analysis of imagery indicates that the effects of tidal flushing of New York harbor extend as far south as Long Branch, New Jersey. Analysis of imagery from 3 September, 1972, indicates a wide band of turbid water extending several miles offshore around Barnegat Inlet. First look analysis of imagery from 10 October, 1972, illustrates the increased reflectance of turbid waters within the bays, sounds, and thoroughfares behind the barrier islands in the southern New Jersey shore area. The estuarine waters emanating from both Brigantine and Absecon Inlets are very turbid relative to the waters further offshore and to the north and south. The tidal prism appears to be quite large but the movement of water once outside the inlets is not very rapid. The waters are not moving away from the coastline but rather along the coast.

Yunghans, R. S.↗

Use of satellite imagery for wildland resource evaluation in the Great Basin

The author has identified the following significant results. Upon receipt of ERTS-1 imagery, scale and resolution determinations were made. It was found that the scale was quite close to the anticipated 1:1 million, and that each ERTS-1 frame had a coverage of approximately 12,500 square miles. A water body 275 feet across was identified on the MSS 7 band as a determination of maximum resolution. Large cities were easily distinguished on all bands. Paved highways and railroads were able to be identified when there was extreme contrast between these structures and surrounding areas. Landforms were identified on all bands, but band 5 proved superior. Vegetation of varying types was identified using band 7. Fields and agricultural areas were identified as was phreatophytic vegetation. Timber, pinyon-juniper, sagebrush, mountain brush, and annual grassland communities were identified on selected frames. Phenology comparisons of selected test sites were made using sequential U-2 imagery. It was found that gray scale and color IR changes relating to the phenology of certain annual grassland, mountain brush, and marsh communities could be identified. Water bodies were identified and delineated using band 7.

Tueller, P. T.↗

The simultaneous quantitation of ten amino acids in soil extracts by mass fragmentography

A specific and sensitive method for the identification and simultaneous quantitation by mass fragmentography of ten of the amino acids present in soil was developed. The technique uses a computer driven quadrupole mass spectrometer and a commercial preparation of deuterated amino acids is used as internal standards for purposes of quantitation. The results obtained are comparable with those from an amino acid analyzer. In the quadrupole mass spectrometer-computer system up to 25 pre-selected ions may be monitored sequentially. This allows a maximum of 12 different amino acids (one specific ion in each of the undeuterated and deuterated amino acid spectra) to be quantitated. The method is relatively rapid (analysis time of approximately one hour) and is capable of the quantitation of nanogram quantities of amino acids.

Pereira, W. E.↗

Scan converting video tape recorder

A video tape recorder is disclosed of sufficient bandwidth to record monochrome television signals or standard NTSC field sequential color at current European and American standards. The system includes scan conversion means for instantaneous playback at scanning standards different from those at which the recording is being made.

Holt, N. I.↗

Study of oxygen gas production phenomenon during stand and discharge in silver-zinc batteries

The effects of a number of cell process and performance variables upon the oxygen evolution rate of silver/silver oxide cathodes are studied to predict and measure the conditions which would result in the production of a minimum of oxygen. The following five tasks comprise the study: the design and fabrication of two pilot test cells to be used for electrode testing; the determination of the sensitivity and accuracy of the test cell; the determination of total volumes and rates of generation by cathodes of standard production procedures; the construction of a sequential test plan; and the construction of a series of positive formation cells in which formation process factors can be controlled.

Source record↗

A slow-speed multiple-channel analog-to-digital data logging system

The system was developed to record from one up to a maximum of sixteen channels of analog data onto magnetic tape. Each analog channel of data can be sampled at rates of 1, 2, 6, 12, or 60 times per minute. The system is divided into three subunits: a digital clock, an incremental magnetic tape recorder, and a sequential converter. The interfacing requirements of these subunits are presented.

Lloyd, T. C.↗

Cyclic debonding of adhesive joints

Bonded lap joints were manufactured and tested under static and fatigue loading. Specimens were designed to fail in the bondline, and all fatigue tests included monitoring the crack growth to failure. Test specimens included aluminum details joined by two different adhesives. Specimens also included titanium and boron-epoxy details joined by an epoxy laminating resin. Additonal program variables included bondline thickness, adherend and spice plate thickness, specimen width, and specimen fabrication procedure. Adhesive aging was found to be generally detrimental to the lives of most of the specimens bonded with one adhesive system. Adhesive material was found to have a major influence on debond rate. Co-cured titanium/boron-epoxy specimens were found to resist debonding better than specimens fabricated with a sequential cure. Splice plate thickness and test section width were found to have little effect on debond rate. The data also suggested the existence of an optimum bondline thickness.

Hoffman, D. J.↗

Estimation and identification study for flexible vehicles

Techniques are studied for the estimation of rigid body and bending states and the identification of model parameters associated with the single-axis attitude dynamics of a flexible vehicle. This problem is highly nonlinear but completely observable provided sufficient attitude and attitude rate data is available and provided all system bending modes are excited in the observation interval. A sequential estimator tracks the system states in the presence of model parameter errors. A batch estimator identifies all model parameters with high accuracy.

Jazwinski, A. H.↗

Rendezvous targeting for space missions

A brief outline of a targeting program for use in the space shuttle mission is presented. This general purpose program can accept a large variety of constraints and can be applied to each maneuver sequence contained in the rendezvous sequence. It consists of a main program which automatically and sequentially calls a general maneuver subroutine to compute each maneuver segment contained in the maneuver sequence.

Tempelman, W. H.↗

In situ spectroradiometric quantification of ERTS data

The author has identified the following significant results. A multispectral photo analysis of the Willcox Playa was also made using ERTS imagery on three consecutive overpasses. The results of the analysis showed that a time sequential multispectral color presentation relates color to environmental changes as a function of time, rather than spectral changes for any single date. Since the primary mission of ERTS is to detect changes in the environment, it is believed that this mode of data reduction would be employed further in conjunction with the conventional techniques.

Yost, E.↗

Dynamics and morphology of Beaufort Sea ice determined from satellites, aircraft, and drifting stations

A series of measurements from drifting stations, aircraft, the ERTS-1, Nimbus 4, and Nimbus 5 satellites have jointly provided a new description of the dynamics and morphology of the ice cover of the Beaufort Sea. The combined analysis of these data show that the eastern Beaufort Sea ice cover is made up of large multiyear floes while the western part is made of small, predominantly first-year floes. The analysis suggests that this distribution might be quasi-steady and that the dynamics and thermodynamics of the region are more complex than hitherto known. The measurements consist of: (1) high resolution ERTS-1 imagery which is used to describe floe size and shape distribution, short term floe dynamics, and lead and polynya dynamics; (2) tracking by Nimbus 4 of IRLS drifting buoys to provide ice drift information which enhances the interpretation of the ERTS-1 imagery; (3) Nimbus 5 microwave (1.55 cm wavelength) imagery which provides synoptic, sequential maps on the distribution of multiyear and first-year ice types; (4) airborne microwave surveys and surface based observations made during 1971 and 1972 in conjunction with the AIDJEX (Arctic Ice Dynamics Joint Experiment) program.

Campbell, W. J.↗

Sediment distribution and coastal processes in Cook Inlet, Alaska

Regional hydrologic and oceanographic relationships in Cook Inlet, Alaska have been recognized from sequential ERTS-1 MSS imagery. Current patterns are visible in the inlet because of differential concentrations of suspended sediment. The circulation patterns within Cook Inlet are controlled primarily by the interaction between the semi-diurnal tides and the counter clockwise Alaska current. In general, heavily sediment laden water is seen to be confined to portions of the inlet north of the Forelands and west of Kalgin Island. Tongues of clear oceanic water are observed to enter the inlet through Kennedy Channel along the east shoreline in the vicinity of Cape Elizabeth. A recurring counterclockwise circulation pattern observed around Kalgin Island seems to result from the interplay of the northerly moving water along the east shore and the southerly moving, sediment laden, water along the west side of the inlet. Prominent, fresh water plumes, heavily laden with sediment are visible at the mouths of all major rivers. Relect plumes from as many as three tidal stages have been recognized.

Anderson, D. M.↗