Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resistivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Investigations on microstructure, mechanical properties and abrasion resistance of 4wt%Cr-2wt%Mn-2wt%Cu-Fe-B alloy

Highlights: • The microstructure mainly consists of martensite and boride (M{sub 2}B) in the as-cast and heat treated Fe-B alloys, and the M{sub 2}B presents 3D-skeleton continuous-distribution. • After heat treatment, the nucleation and precipitation of secondary borocarbide M{sub 23}(C, B){sub 6} probably take place in an in situ manner within martensite. • The matrix hardness and bulk hardness of Fe-B alloy decrease after heat treatment, this is attributed to the decreasing of B/C concentration of matrix caused by the precipitation of M{sub 23}(C, B){sub 6}. • During the two-body wear process, the wear mechanism of Fe-B alloy is microcutting; with decreasing of hardness of Fe-B alloy, the abrasion resistance of Fe-B alloy decreases, i.e. the heat treatment will decrease the abrasion resistance of Fe-B alloy. - Abstract: The microstructure, mechanical properties and abrasion resistance of Fe-B alloy with 4wt%Cr-2wt%Mn-2wt%Cu addition have been systematically investigated. The results show that the microstructures mainly consist of martensite and boride (M{sub 2}B) in the as-cast and heat treated Fe-B alloys; after heat treatment, the morphology and volume fraction of the M{sub 2}B have little change, meanwhile the nucleation and precipitation of secondary borocarbide M{sub 23}(C, B){sub 6} probably take place in an in situ manner within martensite. Moreover, the M{sub 2}B is identified as chemical formula of Fe{sub 2.04}Cr{sub 0.11}Mn{sub 0.07}(B, C) reflecting body-centred tetragonal (bct) structure, and the secondary borocarbide M{sub 23}(B, C){sub 6} has the stoichiometry of Fe{sub 18.84}Cr{sub 2.84}Mn{sub 0.57}(B, C){sub 6} with face-centred cubic (fcc) structure. After heat treatment, the matrix hardness and bulk hardness of Fe-B alloy decrease owing to the decreasing of B/C concentration of matrix caused by the precipitation of M{sub 23}(C, B){sub 6}, while the fracture toughness of Fe-B alloy increases. Meanwhile, the heat treatment will decrease the wear resistance of Fe-B alloy, i.e. the wear resistance of Fe-B alloy would decrease with reduction of the matrix hardness.

36 MATERIALS SCIENCE↗

Simultaneously improving mechanical properties and corrosion resistance of pure Ti by continuous ECAP plus short-duration annealing

Highlights: • Additional short-time annealing led to enhanced strength of UFG Ti due to texture strengthening. • UFG Ti showed improved corrosion resistance in artificial seawater compared with initial CG Ti. • Short-duration annealing enhanced corrosion resistance of UFG Ti due to stronger basal texture. - Abstract: This work investigated the effect of short-duration annealing on mechanical properties and corrosion behavior of bulk ultrafine-grained (UFG) pure Ti (grade 2) produced by high-efficiency equal-channel angular pressing (ECAP), serving the fast developing of marine industries. The initial coarse-grained (CG) Ti achieved higher strength after continuous ECAP at 420 °C for 4 passes, while additional short-duration annealing at 300 °C for 15 min of UFG Ti further led to extraordinary improvement of strength, which was associated with texture strengthening. The yield strength was increased from 362 MPa in as-received state to 561 MPa in post-ECAP annealed condition, and ultimate tensile strength from 450 MPa to 663 MPa. The ECAP-processed UFG Ti had better corrosion resistance in artificial seawater than the initial CG Ti. Short-duration annealing further improved the corrosion resistance of UFG Ti, which was related to stronger basal texture. The corrosion current density decreased from 68.37 nA cm{sup −2} for CG Ti in as-received condition to 41.77 nA cm{sup −2} for UFG Ti processed by ECAP plus short-duration annealing. The fraction of TiO{sub 2} within the surface oxide film for the post-ECAP annealed sample was increased. The bulk UFG Ti after post-ECAP short-duration annealing revealed an excellent combination of high strength, good ductility and superior corrosion resistance for marine applications.

36 MATERIALS SCIENCE↗

Effects of Nb/Ti/V/Ta on phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic stainless steels

Highlights: • Effects of Nb/Ti/V/Ta on phase precipitation at 1073 K in AFA alloys are studied. • The precipitation of σ-FeCr can be accelerated by the formation of B2-NiAl. • The additions of V and Ta can improve the oxidation resistance of AFA alloys. • The precipitation of σ-FeCr will deteriorate the oxidation resistance. • Good performance can be achieved by M co-alloying and an appropriate M/C ratio. - Abstract: The present work investigated the effects of strong carbide-forming elements M (M = Nb, Ti, V, Ta) on the phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic (AFA) stainless steels (Fe-20Ni-(18–23)Cr-2.5Al-2.3Mo-0.08C-Nb/Ti/V/Ta wt%). The designed alloy rods were solid-solutioned at 1523 K for 1.5 h, and then aged at 1073 K for 24 h or oxidized at 1073 K for 500 h, respectively. Besides primary MC carbides, B2-NiAl, Fe{sub 2}M, and σ-FeCr phases would be precipitated from the γ-austenitic matrix in these aged AFA alloys. Furthermore, the precipitation of σ-FeCr could be accelerated by the B2-NiAl formation, which is related to the γ stability. The formation of MC and Fe{sub 2}M can be controlled via adjusting the ratio of M/C. The oxidation resistance of these AFA alloys can be improved effectively by V and Ta addition due to the formation of compact Al{sub 2}O{sub 3} protective scales. This work will provide a new approach to obtain a good combination of creep strength and oxidation resistance through co-alloying with Nb/Ta/V and controlling the M/C ratio within 1.0–2.0 (in molar ratio) simultaneously.

36 MATERIALS SCIENCE↗

Structural Analysis of 23S rRNA Methylating Enzyme Cfr Reveals RNA-Binding Determinants for Methylation Regiospecificity and Antibiotic Resistance

The 23S rRNA methylating enzyme Cfr, found in pathogens including Staphylococcus aureus, Clostridium difficile, Escherichia coli, and Klebsiella pneumoniae, confers resistance to phenicols, lincosamides, oxazolidinones (including linezolid), pleuromutilins, and streptogramins A (the PhLOPS A phenotype). Cfr catalyzes methylation of the C8 position of the A2503 base in 23S rRNA, the recognition site of the above antibiotic classes. Along with the RlmN housekeeping enzyme, Cfr can also promote methylation of the C2 position of the same base. The molecular and structural basis of Cfr’s dual substrate specificity is not known, which hinders our ability to design Cfr-targeting inhibitors necessary to curb PhLOPS A resistance. Here, we present the first crystal structure of Cfr and a detailed analysis of its possible interactions with rRNA. Using structure-guided mutagenesis, mass spectrometry analysis of in cellulo 23S rRNA methylated species, and in cellulo resistance studies, we identify the key amino acids essential for Cfr methylation and multidrug resistance activity. In particular, we found that Cfr’s Q329 residue is important for C8- specific methylation. These data provide a framework for further studies of the biochemistry, structure, and inhibition of this important resistance determinant.

AlphaFold↗

Resistive hose modes in tokamak runaway electron beams

Beams of energetic runaway electrons are generated during disruptions in tokamaks, and fluid models are used to study their effects on macroscale dynamics. Linear computations of a massless, runaway electron beam coupled to MHD plasma show that resistive hose instabilities grow faster than tearing modes at large resistivity. Eigenvalue results with reduced models of the resistive hose instability are compared with results from the full MHD and beam system, showing that the resistive hose decouples from any plasma response. An estimate of plasma temperature at which growth of the resistive hose dominates tearing for post-disruption DIII-D plasma parameters is in a physically relevant regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resistance mutations generate divergent antibiotic susceptibility profiles against translation inhibitors

Mutations conferring resistance to translation inhibitors often alter the structure of rRNA. Reduced susceptibility to distinct structural antibiotic classes may, therefore, emerge when a common ribosomal binding site is perturbed, which significantly reduces the clinical utility of these agents. The translation inhibitors negamycin and tetracycline interfere with tRNA binding to the aminoacyl-tRNA site on the small 30S ribosomal subunit. However, two negamycin resistance mutations display unexpected differential antibiotic susceptibility profiles. Mutant U1060A in 16S Escherichia coli rRNA is resistant to both antibiotics, whereas mutant U1052G is simultaneously resistant to negamycin and hypersusceptible to tetracycline. Using a combination of microbiological, biochemical, single-molecule fluorescence transfer experiments, and X-ray crystallography, we define the specific structural defects in the U1052G mutant 70S E. coli ribosome that explain its divergent negamycin and tetracycline susceptibility profiles. Unexpectedly, the U1052G mutant ribosome possesses a second tetracycline binding site that correlates with its hypersusceptibility. In conclusion, the creation of a previously unidentified antibiotic binding site raises the prospect of identifying similar phenomena in antibiotic-resistant pathogens in the future.

59 BASIC BIOLOGICAL SCIENCES↗

Resistive wall tearing mode disruptions

Abstract This paper deals with resistive wall tearing mode (RWTM) disruptions. RWTMs are closely related to resistive wall modes. RWTMs are tearing modes whose linear and nonlinear behavior is strongly dependent on the resistive wall outside the plasma. The consequence for ITER, is that the thermal quench timescale could be much longer than previously conjectured. Active feedback stabilization is another possible way to mitigate or prevent RWTM disruptions. Simulations of RWTM disruptions are reviewed for DIII-D and MST. MST has a longer resistive wall time than ITER, and disruptions are not observed experimentally when MST is operated as a standard tokamak. Simulations indicate that the RWTM disruption time scale is longer than the experimental shot time. Edge cooling causes contraction of the current profile, which can destabilize RWTMs. The equilibria studied here have the q = 2 rational surface close to the edge of the plasma, and low current density between the q = 2 surface and the wall. A sequence of low edge current model equilibria has major disruptions only for a resistive, not ideal, wall, and edge q ⩽ 3.4 . This is consistent with regimes of tokamak disruptivity, suggesting that tokamak disruptions caused by edge cooling at low edge q could be RWTMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Giant resistance switch in twisted transition metal dichalcogenide tunnel junctions

Resistance switching in multilayer structures are typically based on materials possessing ferroic orders. Here, in this work, we predict an extremely large resistance switching based on the relative spin–orbit splitting in twisted transition metal dichalcogenide (TMD) monolayers tunnel junctions. Because of the valence band spin splitting which depends on the valley index in the Brillouin zone, the perpendicular electronic transport through the junction depends on the relative reciprocal space overlap of the spin-dependent Fermi surfaces of both layers, which can be tuned by twisting one layer. Our quantum transport calculations reveal a switching resistance larger than 10 6 % when the relative alignment of TMDs goes from 0° to 60° and when the angle is kept fixed at 60° and the Fermi level is varied. By creating vacancies, we evaluate how inter-valley scattering affects the efficiency and find that the resistance switching remains large (10 4 %) for typical values of vacancy concentration. Not only should this resistance switching be observed at room temperature due to the large spin splitting, but our results also show how twist angle engineering and control of van der Waals heterostructures could be used for next-generation memory and electronic applications.

36 MATERIALS SCIENCE↗

Operation and Control of a PV Converter with Enhanced Stability Based on Virtual Impedance Emulation in a Pseudo Resistive Grid

A three-phase grid-connected photo-voltaic converter is investigated to enhance its operational capabilities and stability margins. These converters are generally connected to the grid with an inductive impedance. In this paper the possibility of using a resistive impedance to enhance the stability of the overall system has been investigated. To reduce the losses in the system, rather than using a real resistance, a virtual resistance is emulated inside the control architecture to ensure resistive power transfer between two sources. The stability results with inductive and resistive grids are presented based on the previously reported frequency response. The overall system is modeled via MATLAB/Simulink and several important case study results are presented in this paper to verify the efficacy of the proposed architecture.

grid-forming controls↗

Quantifying Dynamic On-State Resistance of GaN HEMTs for Power Converter Design via a Survey of Low and High Voltage Devices

Designing and optimizing high switching frequency, ultra-efficient converters requires detailed knowledge of the behavior and parasitic parameters for both active and passive components. Recently, wide bandgap transistors have enabled simultaneous increases in both switching frequency and efficiency due to higher maximum operating junction temperature limits, lower dc on-state resistances, and reduced parasitic inductances and capacitances. Yet, the early acceptance of gallium-nitride (GaN) switches was plagued by detrimental dynamic on-state resistance effects. This complex phenomenon for GaN devices is characterized by deviations in on-state resistance from dc operating characteristics based on design choices such as the magnitude and duration of both voltage and current stress, switching mode, and junction temperature. While device manufacturers have made improvements compared to early generation devices, experimental evidence from a survey of commercial GaN transistors highlight measurable change in on-state resistance still exists due to variations in voltage stress during hard-switching operation. After sharing insights for obtaining low noise measurements, an analysis method along with two metrics are proposed to characterize dynamic on-state resistance measurements for power electronics designers. Furthermore, quantifying the performance of GaN devices with standardized metrics facilitates a fair comparison between different GaN device technologies during converter development, enables manufacturing qualification for GaN switches, and provides a benchmark to catalyze improvement for the next generation of GaN device development.

14 SOLAR ENERGY↗

Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets

High-temperature superconductors such as REBa 2 Cu 3 O 7-x (REBCO, RE = rare earth) can generate strong magnetic fields that are promising for applications in particle accelerators and compact fusion reactors. Traditionally, voltage taps are installed in superconducting magnets to measure the voltage signals due to resistive transitions. The voltage-tap-based diagnostics is important for the development of magnet technology as it can help pinpoint the locations in the magnet windings that limit the magnet performance. The architecture of the multi-tape REBCO cable such as CORC wires, however, makes it difficult to apply the voltage-tap-based diagnostics to identify the locations of resistive transitions. Distributed fiber optic sensing (DFOS) has the potential to address this issue. In this paper, we report the measurements of thermal strain along a CORC wire based on optical frequency domain reflectometry with a maximum spatial resolution of 0.65 mm and a temporal resolution of 10 Hz. The optical fiber is co-wound with the CORC wire that is epoxy impregnated. During the test, current was increased until a resistive transition occurred in the conductor. The spectrum shift of the reflected light along the fiber was recorded. The results suggested that with proper thermal isolation from the cryogen, DFOS can be used to identify the locations of resistive transitions in CORC wires and magnets. In conclusion, the results will allow a better understanding of the causes of resistive transitions in REBCO conductors and magnets, which will help improve the REBCO magnet technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computationally Efficient AC Resistance Model for Stator Winding With Rectangular Conductors

The resistance of the electric machine’s windings is an important parameter when analyzing the machine’s performance, as conduction losses in the winding are often the largest loss component. However, this resistance changes with frequency due to the skin and proximity effects, making it challenging to accurately estimate these losses. In this article, a computationally efficient, general method of calculating the ac resistance of an electric machine winding with rectangular conductors is presented. The method uses a 1-D magnetoquasi-static model of the stator slot region to develop boundary transfer relations between individual turns. These relations are then used to create an impedance matrix from which the ac resistance can be calculated. This technique is more flexible than previous solutions since it can accommodate different winding configurations such as fractional-pitch windings. It is shown that a fractional-pitch winding has a lower ac resistance than a full-pitch winding. Finally, finite-element analysis simulations and experimental results are used to validate the proposed method.

42 ENGINEERING↗

Disruption of the tagF Orthologue in the epa Locus Variable Region of Enterococcus faecalis Causes Cell Surface Changes and Suppresses an eep -Dependent Lysozyme Resistance Phenotype

The disease-producing capacity of the opportunistic pathogen Enterococcus faecalis is enhanced by the ability of the bacterium to evade killing by antimicrobial agents. Survival of E. faecalis in the presence of the human antimicrobial enzyme lysozyme is mediated in part by the site 2 metalloprotease Eep; however, a complete model of enterococcal lysozyme resistance has not been elucidated. To better understand the molecular basis for lysozyme resistance in E. faecalis, we analyzed Δeep suppressor mutants that acquire resistance to lysozyme through mutation of the gene OG1RF_11713, a predicted teichoic acid biosynthesis-encoding gene located within the variable region of the enterococcal polysaccharide antigen (epa) locus. Sequence comparisons revealed that OG1RF_11713 is most similar to the cytidine-5'-diphosphate (CDP)-glycerol:poly-(glycerolphosphate)glycerophosphotransferase TagF from Staphylococcus epidermidis. Inactivation of OG1RF_11713 in both the wild-type and Δeep genetic backgrounds was sufficient to increase the resistance of E. faecalis OG1RF to lysozyme. Minimal amounts of N-acetylgalactosamine were detectable in cell wall carbohydrate extracts of OG1RF_11713 deletion mutants, and this was associated with a reduction in negative cell surface charge. Targeted disruption of OG1RF_11713 was also associated with increased susceptibility to the antibiotic polymyxin B and membrane-targeting detergents and decreased susceptibility to the lantibiotic nisin. Furthermore, this work implicates OG1RF_11713 as a major determinant of cell envelope integrity and provides further validation that lysozyme resistance is intrinsically linked to the modification of enterococcal cell wall polysaccharides.

59 BASIC BIOLOGICAL SCIENCES↗

Association of Diet and Antimicrobial Resistance in Healthy U.S. Adults

Antimicrobial resistance (AMR) represents a significant source of morbidity and mortality worldwide, with expectations that AMR-associated consequences will continue to worsen throughout the coming decades. Since resistance to antibiotics is encoded in the microbiome, interventions aimed at altering the taxonomic composition of the gut might allow us to prophylactically engineer microbiomes that harbor fewer antibiotic resistant genes (ARGs). Diet is one method of intervention, and yet little is known about the association between diet and antimicrobial resistance. To address this knowledge gap, we examined diet using the food frequency questionnaire (FFQ; habitual diet) and 24-h dietary recalls (Automated Self-Administered 24-h [ASA24 ® ] tool) coupled with an analysis of the microbiome using shotgun metagenome sequencing in 290 healthy adult participants of the United States Department of Agriculture (USDA) Nutritional Phenotyping Study. We found that aminoglycosides were the most abundant and prevalent mechanism of AMR in these healthy adults and that aminoglycoside-O-phosphotransferases (aph3-dprime) correlated negatively with total calories and soluble fiber intake. Individuals in the lowest quartile of ARGs (low-ARG) consumed significantly more fiber in their diets than medium- and high-ARG individuals, which was concomitant with increased abundances of obligate anaerobes, especially from the family Clostridiaceae, in their gut microbiota. Finally, we applied machine learning to examine 387 dietary, physiological, and lifestyle features for associations with antimicrobial resistance, finding that increased phylogenetic diversity of diet was associated with low-ARG individuals. These data suggest diet may be a potential method for reducing the burden of AMR.

59 BASIC BIOLOGICAL SCIENCES↗

High-Level Chromate Resistance in Arthrobacter sp. strain FB24 Requires Previously Uncharacterized Accessory Genes

The annotated genome sequence of Arthrobacter sp. strain FB24 revealed a chromate resistance determinant (CRD): a cluster of 8 genes located on a 10.6 kb fragment of a 96 kb plasmid. The CRD includes chrA, which encodes a putative chromate efflux protein, and three genes with amino acid similarities to the amino and carboxy termini of ChrB, a putative regulatory protein. There are also three novel genes that have not been previously associated with chromate resistance in other bacteria; they encode an oxidoreductase (most similar to malate:quinone oxidoreductase), a functionally unknown protein with a WD40 repeat domain and a lipoprotein. A chromate-sensitive mutant (strain D11) was generated by curing FB24 of its 96-kb plasmid. Elemental analysis indicated that chromate-exposed cells of strain D11 accumulated three times more chromium than strain FB24. Introduction of the CRD into strain D11 conferred chromate resistance comparable to wild-type levels, whereas deletion of specific regions of the CRD led to decreased resistance. Using real-time reverse transcriptase PCR, we show that expression of each gene within the CRD is specifically induced in response to chromate but not by lead, hydrogen peroxide or arsenate. Higher levels of chrA expression were achieved when the chrB orthologs and the WD40 repeat domain genes were present, suggesting their regulatory roles. Collectively, our findings indicate that chromate resistance in strain FB24 is primarily achieved by plasmid-mediated chromate efflux with the contribution of previously unrecognized accessory genes.

59 BASIC BIOLOGICAL SCIENCES↗

Structural Studies of a Rationally Selected Multi-Drug Resistant HIV-1 Protease Reveal Synergistic Effect of Distal Mutations on Flap Dynamics

We report structural analysis of HIV protease variant PR S17 which was rationally selected by machine learning to represent wide classes of highly drug-resistant variants. Crystal structures were solved of PR S17 in the inhibitor-free form and in complex with antiviral inhibitor, darunavir. Despite its 17 mutations, PR S17 has only one mutation (V82S) in the inhibitor/substrate binding cavity, yet exhibits high resistance to all clinical inhibitors. PR S17 has none of the major mutations (I47V, I50V, I54ML, L76V and I84V) associated with darunavir resistance, but has 10,000-fold weaker binding affinity relative to the wild type PR. Comparable binding affinity of 8000-fold weaker than PR is seen for drug resistant mutant PR20, which bears 3 mutations associated with major resistance to darunavir (I47V, I54L and I84V). Inhibitor-free PR S17 shows an open flap conformation with a curled tip correlating with G48V flap mutation. NMR studies on inactive PR S17 D25N unambiguously confirm that the flaps adopt mainly an open conformation in solution very similar to that in the inhibitor-free crystal structure. In PR S17 , the hinge loop cluster of mutations, E35D, M36I and S37D, contributes to the altered flap dynamics by a mechanism similar to that of PR20. An additional K20R mutation anchors an altered conformation of the hinge loop. Flap mutations M46L and G48V in PR S17 /DRV complex alter the Phe53 conformation by steric hindrance between the side chains. Unlike the L10F mutation in PR20, L10I in PR S17 does not break the inter-subunit ion pair or diminish the dimer stability, consistent with a very low dimer dissociation constant comparable to that of wild type PR. Distal mutations A71V, L90M and I93L propagate alterations to the catalytic site of PR S17 . PRS17 exhibits a molecular mechanism whereby mutations act synergistically to alter the flap dynamics resulting in significantly weaker binding yet maintaining active site contacts with darunavir.

59 BASIC BIOLOGICAL SCIENCES↗

Physiological and Molecular-Genetic Characterization of Basal Resistance in Sorghum (Final Report)

This is the final technical report for project #: DE-SC0014116, "Physiological and Molecular-Genetic Characterization of Basal Resistance in Sorghum". In this project we identified variation in the basal defense response of sorghum among different sorghum lines. We evaluated the relationship between levels of basal defense response and levels of disease resistance in the field. There were five major goals of this project: 1) Develop robust assays to measure the MAMP response and disease resistance in sorghum; 2) Screen a set of diverse sorghum germplasm for variation in the MAMP response and disease resistance; 3) Identify genes differentially regulated during the MAMP response in high and low responding sorghum genotypes; 4) Assess the effect of MTI on disease progression in sorghum; 5) Identify loci associated with variation in disease resistance and the MAMP response.

09 BIOMASS FUELS↗

Introgressions of novel diseases resistance genes from Miscanthus into energycane

Sugarcane (Saccharum) is among the world’s leading bioenergy crops. However, modern sugarcane cultivars are derived from a relatively small set of founder genotypes, which has contributed to cultivar susceptibility to diseases. Miscanthus is a close relative of sugarcane that is genetically diverse and a potential source of genes for improving sugarcane. We found that Miscanthus is a source of resistance to four major diseases of sugarcane and we crossed these disease-resistance genes into a predominantly sugarcane genetic background (BC1 generation). Additionally, we found that Miscanthus could also confer genes for chilling-tolerant photosynthesis to sugarcane, which would be highly advantageous for production of energycane in subtropical environments, like the southern coastal plain of the US. Using advanced modeling techniques, we found that standard marker-assisted selection could be effective for breeding resistance conferred by a small number of genes each with large effect (i.e. vertical resistance), but to breed for many genes each of small effect (i.e. horizontal resistance), genomic selection would be the better strategy. Lastly, we learned that Miscanthus can be induced to flower sooner by giving the plants short days (long nights) but that the ideal day length for a given accession depends on its adaptation to its latitude of origin, with tropical accessions requiring shorter days to flower than accessions from high latitudes. This information will facilitate plant breeders’ ability to make crosses between Miscanthus and sugarcane, and enable greater use of Miscanthus as a genetic resource to improve sugarcane.

09 BIOMASS FUELS↗