Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Unveiling the Role of Compositional Drifts on the Tack of Pressure‐Sensitive‐Adhesives

Abstract Pressure‐sensitive‐adhesives (PSAs) are pervasive in electronic, automobile, packaging, and biomedical applications due to their ability to stick to numerous surfaces without undergoing chemical reactions. These materials are typically synthesized by the free radical copolymerization of alkyl acrylates and acrylic acid, leading to an ensemble of polymer chains with varying composition and molecular weight. Here, reversible addition−fragmentation chain‐transfer (RAFT) copolymerizations in a semi‐batch reactor are used to tailor the molecular architecture and bulk mechanical properties of acrylic copolymers. In the absence of cross‐links, the localization of acrylic acid toward the chain ends leads to microphase separation, creep resistance, and enhanced tack. However, in the presence of Al(acac) 3 crosslinker, the creep resistance remains unchanged and mostly the large‐strain mechanical properties are affected. This behavior is attributed to microphase separation, but also to a change in the energy required to break physical associations, and untangle and elongate associative polymers to large deformations.

Polymer Science↗
DOE OSTI2022

Synthesis of Poly(Ester-Ether) Polymers via Hydroesterificative Polymerization of α,ω-Enol Ethers

The Pd-catalyzed carbonylative polymerization of α,ω-enol ethers derived from etherification of 10-undecenol with diols is reported, extending the scope of this relatively new polymerization strategy beyond simple 10-undecenol. Here, by varying the length of the aliphatic diol fragment in the α,ω-enol ether monomers the T m and T d of the polymers could be modified, ranging from 53 to 62 °C and 247 to 277 °C. Additionally, polymerization of α,ω-enol ethers containing rigid and bioderived diol moieties has been achieved, expanding the range of structures and polymer properties accessible via hydroesterificative polymerization. These more rigid α,ω-enol ether monomers resulted in further tuning of the polymer physical properties, with T m values ranging from 54 to 68 °C and T g values increasing up to –17 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Additive manufacturing of carbon fiber-reinforced thermoset composites via in-situ thermal curing

Fiber-reinforced polymer composites are lightweight structural materials widely used in the transportation and energy industries. Current approaches for the manufacture of composites require expensive tooling and long, energy-intensive processing, resulting in a high cost of manufacturing, limited design complexity, and low fabrication rates. Here, we report rapid, scalable, and energy-efficient additive manufacturing of fiber-reinforced thermoset composites, while eliminating the need for tooling or molds. Use of a thermoresponsive thermoset resin as the matrix of composites and localized, remote heating of carbon fiber reinforcements via photothermal conversion enables rapid, in-situ curing of composites without further post-processing. Rapid curing and phase transformation of the matrix thermoset, from a liquid or viscous resin to a rigid polymer, immediately upon deposition by a robotic platform, allows for the high-fidelity, freeform manufacturing of discontinuous and continuous fiber-reinforced composites without using sacrificial support materials. This method is applicable to a variety of industries and will enable rapid and scalable manufacture of composite parts and tooling as well as on-demand repair of composite structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Screening of Coulombic Interactions To Achieve a Higher Power Factor in Conjugated Polymers

Thermoelectric properties of conducting polymers typically suffer from molecular chain disordering, as charge transport is predominantly controlled by morphology. This is especially more problematic when counterions are introduced to tune the carrier concentration for optimal thermoelectric performance, which disturbs the morphology further. Here, in this work, we introduce a new avenue for enhancing thermoelectric properties without needing to regulate the morphology, namely, by controlling the coulombic interaction between polarons and counterions. We perform in situ de-doping thermoelectric experiments over 3 orders of magnitude change in electrical conductivity of three distinct thermoelectric polymers, namely, poly(3-hexylthiophene-2,5-diyl) (P3HT), poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-C 12 ), and poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (OD-PDPP2T-TT) conjugated polymers, followed by grazing-incidence wide-angle X-ray scattering (GIWAXS) to study their respective morphologies. We demonstrate a 9-fold enhancement in the thermoelectric power factor in OD-PDPP2T-TT compared to PBTTT-C 12 and link it to the coulombic screening of charge carriers, including in the optimally doped regime. We support this hypothesis using Boltzmann transport equations and show that, in both P3HT and PBTTT-C 12 , as the polymer is doped, impurity scattering remains the dominant scattering mechanism, while in OD-PDPP2T-TT, the scattering mechanism changes from impurity to acoustic phonon limited, resulting in more effective screening of ionized counterions. Our results provide an additional knob to enhance the fundamental understanding of thermoelectric physics of conducting polymers and provide a pathway to achieve higher performance in the field of organic thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigating the Longevity of Hydraulic Power Take-Off Piston Seals in Wave Energy Converters

Wave energy converters (WECs) utilize hydraulic power take-off (PTO) systems. Hydraulic cylinder seals, which are commonly made from thermoplastic or elastomeric polymers, play a vital role in PTO system functionality as they are responsible for containing and isolating high-pressure fluids. However, manufacturers of WECs have identified a significant concern regarding the longevity of hydraulic piston seal wear due to a combination of stressors, such as high pressure, elevated temperature, chemical corrosion, and/or environmental conditions. Seal failure can result in a loss of tightness and fluid leakage, and consequently a reduction in the efficiency of WECs. Seal manufacturers do not typically provide durability data as the materials are not specifically designed for WEC applications, nor do they account for real-world conditions that the materials may be exposed to. Additionally, there is no comparative performance data available between different seal manufacturers, creating uncertainty in hydraulic PTO designs for WECs. This paper reviews the current state of available seal materials for WEC hydraulic PTO systems, seal selection criteria for WEC applications, potential seal degradation mechanisms, and also material properties of the seals, such as density, hardness, tensile strength, and operating temperature. In addition, this paper also examines current evaluation procedures for estimating the durability of WEC PTO seals. Lastly, additional research on estimating the lifespan of piston and rod polymer seals used in hydraulic PTO systems is proposed.

Elen, Muthu↗
DOE OSTI2025

Bacterial and fungal growth on fungal necromass and its diverse components: Shared profiles and divergent constraints revealed by high‐throughput phenotyping

1. While fungal necromass is increasingly recognized as a major source of persistent carbon (C) in soils, the relative functional roles of bacteria and fungi in decomposing necromass are not fully resolved, and the processes that select for necromass decomposer communities from the broader soil microbial community are an emerging area of interest. 2. In this study, we characterized the growth of 52 bacterial and 83 fungal strains isolated from necromass and soil on 22 C substrates, including different necromass phenotypes, fungal cell wall polymers, dimers and monomers. 3. We found that the isolation habitat of the strains used in this experiment (necromass vs. soil) had no effect on the substrates they were able to use. Isolates from both microbial domains were able to grow on different labile carbon substrates, polymers and necromass phenotypes. However, fungal growth was most limited by necromass melanin content, while bacterial growth was more limited by the abundance of cell wall polysaccharides. Additionally, overall differences in substrate use between bacteria and fungi were most pronounced on polymer substrates. 4. Collectively, our results suggest that there is substantial functional overlap in necromass substrate use across microbial domains, but some notable differences in bacterial and fungal utilization of cell wall polymers, which can function as a direct energy source or a means of accessing other compounds within necromass. Future studies assessing bacteria and fungi decomposing necromass together rather than in isolation will help to uncover potential physical and chemical interactions within and between these two domains during the decay of this important source of persistent soil C.

dead fungal biomass↗
NASA NTRSDate not supplied

Relevant Environment Additive Construction Technology (REACT)

Project Overview This project is focused on developing technologies that enable construction of a Lunar Safe Haven type structure on the moon. A full scale architectural and structural design will be completed based on lunar conditions and Artemis mission needs. A scaled structure will be 3D printed in simulated lunar environments. Technical Approach Polymer bound regolith composite materials will be developed and characterized for lunar additive construction applications. A full scale architectural and structural design will be completed based on the latest scientific data on lunar environments including radiation, meteoroids, thermal conditions, reduced gravity, and moonquakes. The project will culminate with a demonstration of additive construction in simulated lunar vacuum, thermal, regolith, and UV conditions. Results/Summary Preliminary material specifications have been developed and an initial batch has been produced. A first iteration of the architectural and structural designs have been completed. Hardware for 3D printing in simulated lunar conditions is under development. Contributing Partners AI Space Factory – Winner of the NASA 3D Printed Habitat Centennial Challenge Infusion and Transition Plan On-surface construction of infrastructure is a critical capability of the sustainable phase of the Artemis Program and eventual sustainable human presence on Mars. It provides the ability to create protective shelters on-demand using local resources. The 3D-printing technology will achieve TRL 6 in 1g/vacuum tests with thermal/UV exposure in this project. CLPS missions will be pursued for infusion to demonstrate vertical construction with lunar regolith and conditions. Modeling and simulation will be used to define the pilot-scale shelter construction mission for long-term exposure on the lunar surface to validate the system for Artemis operational deployment.

Lunar Construction↗
DOE OSTI2024

Improved Organic Electrochemical Transistors via Directed Crystallizable Small Molecule Templating

Organic electrochemical transistors (OECTs) are of great interest as biosensors and for flexible electronics applications. Historically, processing techniques have been widely used to improve the performance of polymers in organic electronics but have been underutilized in the field of OECTs. Here, in this work, we study the effects of a crystallizable small molecule template for improving the performance of poly(3-hexylthiophene-2,5-diyl) (P3HT)-based OECTs. We utilize 1,3,5-trichlorobenzene (TCB) as a crystallizable additive to induce directional crystallization during blade coating. This procedure results in an aligned, highly ordered, and moderately porous layer of the semiconducting polymer. We find that compared to neat P3HT solutions, films cast with TCB additive show a greater than 8× improvement in the steady state figure of merit for OECTs. Additionally, the optimum TCB loading produces anisotropic OECTs where the polymer chain aligned parallel to the current outperforms the perpendicular alignment by more than a factor of 10. We investigated the mechanism of this improvement and found that polymer alignment, polymer ordering, and film porosity all play a role in improving the device performance. Overall, these results demonstrate the importance of processing on the optimization of polymers for OECTs and suggest a route to greatly improve the performance of commercially available hydrophobic polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dual material fused filament fabrication of composite core‐shell structures with improved impact resistance and interfacial adhesion

The mechanical performance of parts produced by fused filament fabrication (FFF) has been limited due to the presence of voids and poor interlayer welding. Recent advancements in FFF have enabled the fabrication of void-free objects with strong interlayer welding through the use of semicrystalline polymer shells such as high-density polyethylene (HDPE) along with a high viscosity core polymer like acrylonitrile-butadiene-styrene (ABS). Furthermore, the zero-shear viscosity (η0) of ABS is three orders of magnitude higher than HDPE making the ABS-HDPE core-shell configuration preferable. ABS holds the shape by preventing bulk flow and part bending while HDPE promotes full surface contact across the layers. Most polymers, however, are immiscible which causes a weak weld line along the core-shell interface. Herein, maleic anhydride (MAH) is grafted to the butadiene segment of the ABS core thereby compatibilizing the interface with HDPE, improving the interfacial adhesion. Attenuated total reflectance-Fourier transform infrared spectroscopy was employed to confirm successful grafting. Using a custom-made die affording the core-shell structure, the ABS-g-MAH is shown to improve the impact resistance by 253% and 16% compared to neat HDPE and ABS specimens, respectively. Additionally, a 10% increase compared to the unmodified ABS-HDPE core-shell configuration is observed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Towards the applications of mechanophore incorporated feedstocks for additive manufacturing

The ability to additively-manufacture mechanically responsive molecules, known as mechanophores (MPs), that are incorporated into polymer feedstocks provides opportunities for self-healing, real-time damage detection, and improvements in quality assurance and control capabilities to several industries (wind energy technology, building and construction, etc.) who are adopting additive manufacturing (AM). However, before the applications are realized and industrially adopted, further research and development regarding MP-incorporated AM feedstock availability, production scale-up, and processability and printability is needed. Here, the goal of this review is to bridge the gap between the bench top and real world applications of AM of MPs by identifying high impact application spaces and highlighting the challenges that need to be overcome for widespread adoption. The state-of-the-art of AM of MP-incorporated feedstocks is reviewed, followed by a discussion of potential future applications, current challenges, and research areas that work toward commercialization of AM of MP-incorporated feedstocks.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Polyhydroxyalkanoates in emerging recycling technologies for a circular materials economy

Circular polymer systems, specifically polyesters operating through chemical and biological technologies, are approaching a critical moment of industrial adoption and scale-up feasibility. At the same time, polyhydroxyalkanoate (PHA) production, scale-up, and resulting material development is converging toward commodity applications. The current PHA end-of-life philosophy, however, focalizes leveraging inherent biodegradability to circumvent plastic waste accumulation. If indeed a substantial replacement of incumbent single-use plastics with PHA alternatives is to be met in commercial manufacture, we emphasize the importance of linking PHA development with feasible polymer recycling technologies. In other words, a PHA materials economy is significantly more carbon- and cost-favorable when efficient mechanical (reprocessing), chemical (deconstruction, depolymerization), or biological (enzymatic) recycling is prioritized over biodegradation or composting. In this perspective, we discuss strategies for PHA recyclable-by-design principles, guidable by developing machine learning tools, as well as material compatibility with closed-loop recycling technologies. Additionally, we posit compelling life-cycle assessment incentives for adopting polymer reclamation over competing pathways. Ultimately, we hope this narrative further inspires the alignment between PHA design with growing calls for a circular material economy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Catalytic deconstruction of organic additive-containing plastics

Plastics waste ends up in landfills, oceans, and incinerators, posing major environmental and human health threats. Catalytic deconstruction is emerging as a key technological solution to handle complex plastics and has successfully converted virgin polymers into various products. Here, we investigate the resilience of chemical deconstruction technologies to organic additives, which are ubiquitous in plastics. We study catalyst-additive interactions experimentally and via first-principles calculations for plastics additives representative of entire classes. We reveal two deactivation mechanisms and demonstrate that many recently developed catalysts are inadequate for polyolefin conversion due to poisoning caused by the strong adsorption of most additives or their small fragments. Furthermore, we also identify conditions and catalysts that can circumvent the challenge of deconstruction in the presence of additives challenge.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Recyclable CFRPs with extremely high T g : hydrothermal recyclability in pure water and upcycling of the recyclates for new composite preparation

In recent years researchers have introduced different malleable and/or degradable thermosetting polymers to address the recyclability of traditional thermoset materials. Nonetheless, the mechanical properties and glass transition temperature (T g ) of these polymers are often compromised to achieve the desired depolymerization rate. In this work, a hydrothermally recyclable epoxy/anhydride thermosetting system with superior mechanical performance and high T g (>200 °C) was developed for carbon fiber reinforced plastic (CFRP) applications, using triethanolamine as the co-curing agent and tetraglycidyl methylenedianiline (TGDDM) as the epoxy matrix. The hydrothermal recycling of such cured systems is achieved at relatively low temperature (200 °C) without the addition of a catalyst. This mild recycling process decomposes the recyclable polymer matrix into an oligomer and imparts little damage to the valuable carbon fiber. The recycled carbon fiber and the decomposed polymer resin are reused to prepare a new CFRP. Here, this study has introduced a simple and practical approach for the preparation of recyclable CFRPs with high T g and a pathway for highly efficient closed-loop recycling, which sets up a framework for the future design of sustainable polymer composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Simple Monomers for Precise Polymer Functionalization During Ring-Opening Metathesis Polymerization

Controlling the monomer sequence of synthetic polymers is a grand challenge in polymer science. Conventional sequence control has been achieved in dispersed polymers by exploiting the kinetic tendencies of monomers and their order of addition. While the sequence of blocks in multiblock copolymers can be readily tuned using sequential addition of monomers (SAM), control over the sequence distribution is eroded as the targeted block size approaches a single monomer unit (i.e., X n ~ 1) due to the stochastic nature of chain-growth reactions. Thus, unique monomers are needed to ensure precise single additions. Herein, we investigate common classes of cyclic olefin monomers for ring-opening metathesis polymerization (ROMP) to identify monomers for single unit addition during sequential monomer addition synthesis. Through careful analysis of polymerization kinetics, we find that easily synthesized oxanorbornene imide monomers are suitable for single-addition reactions. With the identified monomers, we demonstrate the synthesis of multiblock copolymers containing up to three precise functionalization sites and singly cross-linked four-armed star copolymers. In conclusion, we envision that expanded kinetic analyses of monomer reactivities in ROMP reactions will enable novel polymer synthesis capabilities such as the autonomous synthesis of sequence-defined polymers or one-shot multiblock copolymer syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Accurate Thermochemistry of Complex Lignin Structures via Density Functional Theory, Group Additivity, and Machine Learning

A molecular-level understanding of lignin structures and bond dissociation energies could facilitate depolymerization technologies. Still, this information is currently limited due to the lack of databases and the simplification of surrogate models. Here, substitution effects on seven common linkages in lignin polymers are systematically investigated. An automated reaction network generator is employed to create a database of structures. A new group additivity (GA) model based on principal component analysis (PCA) descriptors is introduced and trained on gas-phase density functional theory data of 4100 species at the M06-2X/6-311++G(d,p) level. Hydrogen bonds, local steric, and nonaromatic ring contributions are also incorporated. Lastly, we improve the accuracy of the group additivity model to reach the G4 theory by computing a data set of 770 species at this level and using a data fusion approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High efficiency environmental sampling with rapidly cured peelable coatings

A rapidly curable liquid gel for collecting an analyte from a sampling surface includes a polymer precursor mixture including a monomer and/or an oligomer; and an additive to enhance extraction of the analyte from the sampling surface. A kit for collecting an analyte from a sampling surface may include the rapidly curable liquid gel and a portable device for rapidly curing the gel. The rapidly curable liquid gel is cured to thereby form a peelable sampling film, and the sampling film is removed from the sampling surface, thereby collecting the analyte. In one embodiment, the rapidly curable liquid gel is UV-curable, the polymer precursor mixture further includes a photoinitiator compound, and the portable device includes a UV light source configured to emit UV light of a wavelength range absorbed by the photoinitiator compound.

Henzl, Vladimir↗
DOE OSTI2022

Layer Time Control for Large Scale Additive Manufacturing Using High Performance Computing

This work proposes to optimize an additive manufacturing AM process to reduce energy and printing cost. The polymer AM process is inherently dependent on the time-temperature history of each layer to maintain geometric tolerances and mechanical integrity. Our preliminary study shows that regression-based layer time control model using thermal images could result in up to 30% build time reduction for simple geometries. This proposed work would use high-performance computing (HPC) to couple the data-driven model with thermal simulation for better predicting layer temperature profiles, improving throughput of large-scale additive manufacturing, and reducing its energy cost. We have developed a method to optimize a layer deposition time (a.k.a. layer time) for large-scale AM via physics-based simulations. A long layer time leads to an over-cooled surface on which a new layer is deposited, and therefore, it may result in a weak bonding or debonding between layers, cracking, or warping. A short layer time leads to a high temperature of the structure due to insufficient cooling, and therefore, the structure may not be stiff enough and may collapse during manufacturing. Therefore, it is important to estimate the optimal layer time in additive manufacturing for a high-quality product. The temperature of a top layer right before deposition is recommended to be slightly higher than the glass temperature of the material. A temperature cooling was approximated to an exponential function of time, and the optimized layer time was obtained based on a target temperature while maintaining a minimal printing time. The material used is carbon fiber-reinforced polycarbonate (CF/PC), and the large-scale deposition system used is LSAM TM from Thermwood Corporation. Three different layer time cases were used for experiments, and a series of thermal images were obtained via an infra-red (IR) camera during the entire AM processes. AM process simulations were performed using a finite element method and the temperature profiles from the simulation were in good agreements with those from experiments. The layer time optimization was performed based on the temperature profiles from the simulations. A layer temperature with the optimal layer time was confirmed as the target temperature through simulation. In addition to the development of a layer time optimization method, we have developed a numerical framework for AM simulation with element activations in sync with toolpath, based on an open source finite element framework, DEAL.II. A major portion of this work was presented at SAMPE 2022 Conference and Exhibition on May 2022, and published in Proceedings of SAMPE 2022.

42 ENGINEERING↗
DOE OSTI2022

Exploiting chitosan to improve the interface of nanocellulose reinforced polymer composites

Cellulose nanofibrils (CNFs) have been widely used as a nanofiller for polymer composite reinforcement due to their excellent mechanical properties. However, CNF is produced in water and needs to be dried prior to use in composite materials. The presence of hydroxyl groups on the surface of CNF creates strong hydrogen bonding that makes it difficult and costly to dry. Additionally, the hydrophilicity at the fiber surface results in agglomeration of CNFs within many polymer matrices. In this study, chitosan (CS) was co-precipitated with CNF to produce a dual-bonding filler for use in poly (lactic acid) (PLA) composites. CS promotes improved interfacial interaction within the polymer matrix by forming strong hydrogen bonds with the CNF and potential covalent bonds with the PLA. Finally, the results confirmed that the addition of a small amount of CS significantly improved the mechanical properties compared to PLA + CNF composites and neat PLA. The detailed study of the PLA + CNF/CS composites reveals the synergetic effect of the hydrogen and covalent bonding mechanism for PLA reinforcement.

59 BASIC BIOLOGICAL SCIENCES↗