Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Interplay of superconducting, metallic, and crystalline states of composite fermions at 𝜈 = $\frac{1}{6}$ in wide quantum wells

Evidence for developing fractional quantum Hall effect (FQHE) at filling fraction 𝜈 = 1/6 and 1/8 was recently reported in wide GaAs quantum wells [Wang et al., Phys. Rev. Lett. 134, 046502 (2025)]. In this article, we theoretically investigate the nature of the state at 𝜈 = 1/6 as a function of the quantum well width and the density by considering composite-fermion (CF) crystals, CF Fermi sea, and various kinds of paired CF states. The 𝑓-wave paired state has the lowest energy among the paired CF states. However, for parameters of interest, the energies of the CF crystal, the CF Fermi liquid, and the 𝑓-wave paired CF state are too close to distinguish. We, therefore, predict that 𝑖𝑓 the FQHE at 𝜈 = 1/6 is experimentally confirmed, this state would be an 𝑓-wave paired state of CFs, which can be verified by measurement of its thermal Hall conductance. Exact diagonalization studies on clean systems with up to eight electrons show that the ground states at 𝜈 = 𝑛/(6⁢𝑛 ± 1) are incompressible for all widths and densities we have considered, and are well described by the corresponding Laughlin and Jain states. We propose a phase diagram for large quantum well widths and densities in which at zero disorder, incompressible FQHE states are stabilized at 𝜈 = 𝑛/(6⁢𝑛 ± 1) and 𝜈 = 1/6, but in between these fillings the CF crystal is stabilized. We also present a qualitative discussion on the effects of disorder and propose a schematic phase diagram based on it. With disorder, which creates a spatial variation in the filling factor, two regimes are identified: (i) for small disorder, when the incompressible states percolate at the special fillings, FQHE with quantized Hall plateaus and vanishing longitudinal resistance should occur; and (ii) for larger disorder, when the CF crystal percolates, the longitudinal resistance rises with decreasing temperature but the domains of FQHE liquid produce minima at the special filling factors. Here, experiments are consistent with the latter scenario. We also mention a possible connection of the phase diagram presented here to a puzzling behavior observed for the fractional quantum anomalous Hall effect in pentalayer graphene.

Composite fermions↗

Understanding the Applicability of Gas/Particle Partitioning Theory to SOA using Novel Chemically-Speciated Partitioning Measurements (Final Report)

The main objective of this research grant project was to investigate the physical-chemical processes and properties of particles and partitioning gases that influence gas/particle (G/P) partitioning and timescales for equilibration, to directly determine the conditions under which equilibrium G/P partitioning theory can be applied to secondary organic aerosol (SOA). SOA constitutes a major component of submicron particles in the atmosphere, which have important implications for air quality, human and ecosystem health, radiation balance, and climate; however SOA formation, evolution and losses are not well understood. Use of novel on-line measurements of chemically-speciated partitioning measurements of both gas-phase and particle-phase components was a central component to advancing these scientific goals. The key approach was to conduct environmental chamber studies with systems of increasing complexity to determine G/P partitioning rates and equilibrium states for chemically-speciated SOA components. The project builds on our previous work on gas-wall partitioning that must be understood in order to study G/P partitioning in chambers, and to help extrapolate the results to be atmospherically relevant. The goal was to employ measurements and modeling to systematically determine when G/P partitioning theory accurately describes the distribution of oxidized organic compounds in the gas and aerosol phases, and when and why it does not (e.g., aerosol phase-state kinetic limitations, non-ideal mixing, phase separation, oligomer formation,), for chemical and physical conditions typically found throughout the continental boundary layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bayesian inference of the dense-matter equation of state encapsulating a first-order hadron-quark phase transition from observables of canonical neutron stars

The remarkable progress in recent multimessenger observations of both isolated neutron stars (NSs) and their mergers has provided some of the much needed data to improve our understanding about the equation of state (EOS) of dense neutron-rich matter. Various EOSs with or without some kinds of phase transitions from hadronic to quark matter (QM) have been widely used in many forward modelings of NS properties. Direct comparisons of these predictions with observational data sometimes also using χ 2 minimizations have provided very useful constraints on the model EOSs. Furthermore, it is normally difficult to perform uncertain quantifications and analyze correlations of the EOS model parameters involved in forward modelings especially when the available data are still very limited.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ferromagnetic MnBi 4 Te 7 obtained with low-concentration Sb doping: A promising platform for exploring topological quantum states

The tuning of the magnetic phase, chemical potential, and structure is crucial to observe diverse exotic topological quantum states in Mn Bi 2 Te 4 (Bi 2 Te 3 ) m (m = 0–3). Here we show a ferromagnetic (FM) phase with a chiral crystal structure in Mn (Bi 1–x Sb x ) 4 Te 7 , obtained via tuning the growth conditions and Sb concentration. Unlike previously reported Mn (Bi 1–x Sb x ) 4 Te 7 , which exhibits FM transitions only at high Sb doping levels, our samples show FM transitions (T C = 13.5 K) at 15%–27% doping levels. Furthermore, our single-crystal x-ray-diffraction structure refinements find Sb doping leads to a chiral structure with the space group of P3, contrasted with the centrosymmetric $P\bar{3}m1$ crystal structure of the parent compound MnBi 4 Te 7 . Through angle-resolved photoemission spectroscopy measurements, we also demonstrated that the nontrivial band topology is preserved in the Sb-doped FM samples. Given that the nontrivial band topology of this system remains robust for low Sb doping levels, our success in making FM Mn(Bi 1–x Sb x ) 4 Te 7 with x = 0.15, 0.175, 0.2, and 0.27 paves the way for realizing the predicted topological quantum states, such as the axion insulator and Weyl semimetals. Additionally, we also observed magnetic glassy behavior in both antiferromagnetic MnBi 4 Te 7 and FM Mn (Bi 1–x Sb x )4 Te 7 samples, which we believe originates from cluster spin-glass phases coexisting with long-range antiferromagnetic/FM orders. Further, we have also discussed how the antisite Mn ions impact the interlayer magnetic coupling and how FM interlayer coupling is stabilized in this system.

36 MATERIALS SCIENCE↗

Imaging moiré excited states with photocurrent tunnelling microscopy

Moiré superlattices provide a highly tuneable and versatile platform to explore novel quantum phases and exotic excited states ranging from correlated insulators to moiré excitons. Scanning tunnelling microscopy has played a key role in probing microscopic behaviours of the moiré correlated ground states at the atomic scale. However, imaging of quantum excited states in moiré heterostructures remains an outstanding challenge. In this report we develop a photocurrent tunnelling microscopy technique that combines laser excitation and scanning tunnelling spectroscopy to directly visualize the electron and hole distribution within the photoexcited moiré exciton in twisted bilayer WS 2 . The tunnelling photocurrent alternates between positive and negative polarities at different locations within a single moiré unit cell. This alternating photocurrent originates from the in-plane charge transfer moiré exciton in twisted bilayer WS 2 , predicted by our GW-Bethe–Salpeter equation calculations, that emerges from the competition between the electron–hole Coulomb interaction and the moiré potential landscape. Our technique enables the exploration of photoexcited non-equilibrium moiré phenomena at the atomic scale.

36 MATERIALS SCIENCE↗

Thermodynamics of gallium-stabilized delta-plutonium: A high-temperature drop calorimetry study

Throughout the Cold War (1947–1991), both the United States and the former Soviet Union independently derived a phase diagram for the Pu-Ga system that has different implications on Pu phase stability. In the phase diagram produced by the United States, the Pu δ-phase is thermodynamically stable at room temperatures when Ga content is between 2 and 9 at. %. The diagram produced by the Soviet Union shows the δ-phase undergoing an eutectoid decomposition into the α-Pu + α-Pu 3 Ga at 7.9 at. % Ga and 370 K. This would suggest that Ga-stabilized δ-Pu is metastable with respect to α-Pu + α-Pu 3 Ga at 298 K. To investigate this, and the thermodynamic behavior of Ga in the FCC lattice of δ-Pu, we have utilized high-temperature drop calorimetry to study the enthalpy of formation of two δ-Pu 1−x Ga x compositions. In doing so, mixing models (regular and subregular) were developed to understand the thermodynamic behavior of Ga in the FCC lattice of δ-Pu and found a strong departure from ideal conditions, which suggests Ga ordering in the FCC lattice of δ-Pu. Overall, it was found that δ-Pu 1−x Ga x is enthalpically metastable with respect to α-Pu + Pu 3 Ga at 298 K.

36 MATERIALS SCIENCE↗

Effect of chemical substitution and external strain on phase stability and ferroelectricity in two dimensional M 2 CT 2 MXenes

Two dimensional ferroelectric materials are gaining increasing attention for use in ultrathin electronic devices owing to the presence of a spontaneous polarization down to one or two monolayers. However, such materials are difficult to identify, especially those with out-of-plane electric polarizations. Previous work predicted that a metastable ferroelectric phase exists in the 2D MXene Sc 2 CO 2 , while further studies have predicted that this phase exists in other MXene chemistries. However, questions remain about the origin of ferroelectricity, the stability of this phase relative to other competing phases, and the effect of external stimuli in these materials. In this work, we use density functional theory calculations to investigate 12 M 2 CT 2 MXenes (M = transition metal, T = surface terminating group) and determine which have the ferroelectric phase as their ground state. We compute these materials’ polarizations, densities of states, phonon band structures, Bader charges, and Born effective charges in the ferroelectric phase to elucidate the reasons for its stabilization. We demonstrate that this ferroelectric phase can be preferentially stabilized in non-ferroelectric MXenes through full chemical substitution of Sc or O, alloying of the Sc sites, or application of epitaxial strain. Finally, we show that these materials have excellent piezoelectric properties as well. This work provides a detailed understanding of ferroelectric MXenes and show how the number of 2D ferroelectric materials can be increased through chemical substitution or application of external stimuli.

36 MATERIALS SCIENCE↗

Correlated nanoelectronics and the second quantum revolution

The growing field of correlated nanoelectronics exists at the intersection of two established fields: correlated oxide electronics and semiconductor nanoelectronics. The development of quantum technologies that exploit quantum coherence and entanglement for the purposes of computation, simulation, and sensing will require complex material properties to be controlled at nanoscale dimensions. Heterostructures and nanostructures formed at the interface between LaAlO 3 and SrTiO 3 exhibit striking behavior that arises from the ability to program the conductive behavior at extreme nanoscale dimensions. The active electronic layer, SrTiO 3 , exhibits a wide range of gate-tunable phenomena such as ferroelectricity, ferroelasticity, magnetism, superconductivity, and spin–orbit coupling, all of which can be controlled at the nanoscale using two reversible methods: conductive atomic force microscope lithography and ultra-low-voltage electron beam lithography. Mesoscopic devices such as single-electron transistors and quasi-one-dimensional electron waveguides can be “sketched” using these techniques, and the properties of these devices differ significantly from those created from traditional semiconductors, such as Si or GaAs. The strongly correlated nature of the SrTiO 3 system is evident from superconducting behavior as well as a state in which electrons are paired outside the superconducting state. A highly exotic phase was discovered in which a degenerate quantum liquid is formed from bound states of n = 2, 3, 4, … electrons. Further development of correlated nanoelectronics based on the LaAlO 3 /SrTiO 3 system can potentially lead to a general platform for quantum simulation as well as a pathway for the development of highly entangled states of multiple photons.

36 MATERIALS SCIENCE↗

Analysis of a first order phase locked loop in the presence of Gaussian noise

A first-order digital phase locked loop is analyzed by application of a Markov chain model. Steady state loop error probabilities, phase standard deviation, and mean loop transient times are determined for various input signal to noise ratios. Results for direct loop simulation are presented for comparison.

Blasche, P. R.↗

Ice Particle Analysis of the Honeywell AL502 Engine Booster

A flow and ice particle trajectory analysis was performed for the booster of the Honeywell ALF502 engine. The analysis focused on two closely related conditions one of which produced an icing event and another which did not during testing of the ALF502 engine in the Propulsion Systems Lab (PSL) at NASA Glenn Research Center. The flow analysis was generated using the NASA Glenn GlennHT flow solver and the particle analysis was generated using the NASA Glenn LEWICE3D v3.63 ice accretion software. The inflow conditions for the two conditions were similar with the main differences being that the condition that produced the icing event was 6.8 K colder than the non-icing event case and the inflow ice water content (IWC) for the non-icing event case was 50% less than for the icing event case. The particle analysis, which considered sublimation, evaporation and phase change, was generated for a 5 micron ice particle with a sticky impact model and for a 24 micron median volume diameter (MVD), 7 bin ice particle distribution with a supercooled large droplet (SLD) splash model used to simulate ice particle breakup. The particle analysis did not consider the effect of the runback and re-impingement of water resulting from the heated spinner and anti-icing system. The results from the analysis showed that the amount of impingement for the components were similar for the same particle size and impact model for the icing and non-icing event conditions. This was attributed to the similar aerodynamic conditions in the booster for the two cases. The particle temperature and melt fraction were higher at the same location and particle size for the non-icing event than for the icing event case due to the higher incoming inflow temperature for the non-event case. The 5 micron ice particle case produced higher impact temperatures and higher melt fractions on the components downstream of the fan than the 24 micron MVD case because the average particle size generated by the particle breakup was larger than 5 microns which yielded less warming and melting. The analysis also showed that the melt fraction and wet bulb temperature icing criterion developed during tests in the Research Altitude Test Facility (RATFac) at the National Research Council (NRC) of Canada were useful in predicting icing events in the ALF502 engine. The development of an ice particle impact model which includes the effects of particle breakup, phase change, and surface state is necessary to further improve the prediction of ice particle transport with phase change through turbomachinery.

Ice Accretion Codes↗

Deciphering Extreme Mineral Records; Microstructural Phase Heritage of Shocked Materials

High-pressure minerals such as coesite, stishovite, and reidite are often used as indicators of shock metamorphism. However, high-pressure and high-temperature phases are metastable at ambient conditions and, therefore, often revert to a more energetically favorable phase. During solid-state transformations, the crystallographic orientations of the stable polymorph are controlled by the transformation pathway from the parent. Microstructural orientation analysis using electron backscatter diffraction (EBSD) of the stable phase can reveal systematic intercrystalline orientation relationships (OR) diagnostic of solid-state transformations from these high-pressure or high-temperature polymorph phases (Cayron et al., 2006). Knowledge of polymorph stability fields for a given system can thus be used to infer minimum shock P and/or T conditions that rocks have experienced, which are otherwise unavailable using traditional thermobarometers such as element partition coefficients. Using orientation relationships to infer the former presence of mineral phases has been termed microstructural “phase heritage”, and has successfully been used to probe for evidence of extreme pressures and temperatures resulting from hypervelocity impacts. The reconstruction of polymorphs of ZrSiO4 (zircon, reidite) and ZrO2 (baddeleyite) have further elucidated the behavior of these phases under hypervelocity impact conditions (Timms et al., 2017a; White et al., 2018), and OR analysis of shocked monazite has identified a previously unrecognized tetragonal high-P polymorph (Erickson et al., 2019). Zircon will convert to the low tetragonal polymorph reidite at shock stresses above ~21 GPa. However, upon decompression at temperatures above 1200 °C reidite will revert to zircon (Kusaba et al., 1985). Recrystallized zircon neoblasts encased in impact melt often show systematic misorientation relationships of 90° about <110> indicative of reversion from the reidite (Fig. 1), and preserving cryptic evidence of the high-P history that is often erased by the post shock thermal spike (Cavosie et al., 2016). Microstructural OR analysis of a dissociated zircon corona composed of baddeleyite (monoclinic-ZrO2) has identified the former presence of cubic zirconia within impact melt glass from the Mistastin Lake impact structure, Labrador, CA. Based on stability fields in the ZrO2-SiO2 binary phase diagram, cubic zirconia records thermal conditions in excess of 2370 °C at ambient P, indicating that the Mistastin impact melt is the hottest rock identified on Earth’s surface (Timms et al., 2017b). Shock-deformed monazite (monoclinic La,Ce,ThPO4) containing lamellae comprised of interlocking laths has been identified from the Haughton Dome impact structure, Nunavut, Canada and Nördlinger-Ries Crater, southern Germany. The lath-structured lamellae are composed of four systematic orientation variants, which OR analyses indicate originate from a tetragonal parent whereby the [010]monoclinic aligns with either [100] or [010]tetragonal (Erickson et al., 2019). These results highlight utility of microstructural phase heritage analyses for the identification of unstable high-P or high-T polymorphs that uniquely record the extremely transient shock conditions produced by hypervelocity impacts.

Timmons Erickson↗

Field-resolved observation of exciton coherence in a van der Waals magnet

The emergence of coherence among electronic quasiparticles underlies collective quantum phenomena from superconductivity to superradiance. In semiconductors, exciton coherence is generally thought to decay rapidly due to scattering and dephasing, limiting its persistence on ultrafast timescales. Here, in this work, we demonstrate a light-field-driven mechanism that creates and stabilizes exciton coherence in the layered antiferromagnet CrSBr. We directly record the coherent optical field emitted by excitons and track in real time how a deterministic phase, imprinted by the excitation laser, drives incoherent excitons to synchronize into a collective state. This ensemble remains phase coherent for more than 2 ps, whereas its resonance energy undergoes an ultrafast modulation mediated by spin and lattice interactions. The time-resolved field evolution indicates that the multiple peaks seen in conventional spectra originate from a single excitonic resonance subject to dynamic energy modulation. Our findings establish optical phase imprinting as a mechanism to control and sustain collective order in semiconducting magnets, bridging light-driven dynamics with excitonic and magnetic correlations in layered quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic experiments to study the α - ε phase transition in cerium

The ability to understand and predict the response of matter at extreme conditions requires knowledge of a material’s equation-of-state including the location of phase boundaries, transition kinetics, and the evolution of material strength. Cerium is a material with a complex phase diagram that continues to attract significant scientific interest. Recent dynamic experiments have provided information on the low-pressure γ–α phase transition, sound speed, and Hugoniot data for the higher-pressure α phase, as well as the incipient shock melt transition. Despite these efforts, there are still regions of the phase diagram that are largely unexplored dynamically, including the high-pressure region below the melt boundary. Along a room temperature isotherm, diamond anvil cell data report a transition to the ϵ phase between 13 and 17 GPa. At higher temperatures, similar diamond anvil cell data show significant disagreement regarding the existence, location, and slope of the ϵ-phase boundary. In this work, double-shock loading was used to access the α–ϵ region of the phase diagram to obtain equation-of-state information and to determine the location of the ϵ-phase boundary for shock loading.

74 ATOMIC AND MOLECULAR PHYSICS↗

Solid‐State Reaction Heterogeneity During Calcination of Lithium‐Ion Battery Cathode

Abstract During solid‐state calcination, with increasing temperature, materials undergo complex phase transitions with heterogeneous solid‐state reactions and mass transport. Precise control of the calcination chemistry is therefore crucial for synthesizing state‐of‐the‐art Ni‐rich layered oxides (LiNi 1‐x‐y Co x Mn y O 2 , NRNCM) as cathode materials for lithium‐ion batteries. Although the battery performance depends on the chemical heterogeneity during NRNCM calcination, it has not yet been elucidated. Herein, through synchrotron‐based X‐ray, mass spectrometry microscopy, and structural analyses, it is revealed that the temperature‐dependent reaction kinetics, the diffusivity of solid‐state lithium sources, and the ambient oxygen control the local chemical compositions of the reaction intermediates within a calcined particle. Additionally, it is found that the variations in the reducing power of the transition metals (i.e., Ni, Co, and Mn) determine the local structures at the nanoscale. The investigation of the reaction mechanism via imaging analysis provides valuable information for tuning the calcination chemistry and developing high‐energy/power density lithium‐ion batteries.

Chemistry↗

Spin-selective evolution of the Zhang-Rice state in binary transition metal oxide MnO(001) film

Here, the Zhang-Rice (ZR) state is a strongly hybridized bound state formed by transition-metal and oxygen atoms. The spin fluctuations within the ZR state are known to play an important role in high-T c superconductivity in cuprates. Here, we employ a combination of angle-resolved photoemission spectroscopy (ARPES), x-ray photoemission spectroscopy (XPS), and ab initio embedded dynamical mean-field theory (eDMFT) to investigate the influence of magnetic ordering on the spectral characteristics of the valence band and Mn 2⁢p core-level in MnO (001) ultrathin films. Our results demonstrate that a complex spin-selective evolution of Mn 3⁢d-O2⁢p hybridization develops due to the long-range antiferromagnetic (AFM) ordering. This hybridization significantly alters the spectral shape and weight of the ZR state. Specifically, in the AFM phase, we observed the sharpening of the ZR state and band folding with the periodicity of the AFM unit cell of MnO(001). We also demonstrated a strong connection between the spectral evolution of the ZR state and the non-local screening channels of the photoexcited core holes. Further, our detailed temperature-dependent study reveals the presence of short-range antiferromagnetic correlations that exist at much higher temperatures than Neel temperature (T N ) and shows the evolution of the ZR state across the magnetic transitions and its implication to the core-hole screening in 3⁢d binary transition metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An electronic microemulsion phase emerging from a quantum crystal-to-liquid transition

Strongly interacting electronic systems often exhibit a complicated phase diagram that results from the competition between different quantum ground states. One feature of these phase diagrams is the emergence of microemulsion phases, where regions of different phases self-organize across multiple length scales. The experimental characterization of these microemulsions can pose considerable challenges, as the long-range Coulomb interaction microscopically mingles with the competing states. Here we observe the signatures of the microemulsion between an electronic Wigner crystal and an electron liquid in a MoSe 2 monolayer using cryogenic reflectance and magneto-optical spectroscopy. We find that the transition into this microemulsion state is marked by anomalies in exciton reflectance, spin susceptibility and umklapp scattering, establishing it as a distinct phase of electronic matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plutonium Oxidation State Distribution in the Presence of WIPP-Relevant Organics and Iron Corrosion Products

The oxidation state and solubility of plutonium (Pu) in high ionic strength synthetic WIPP (Waste Isolation Pilot Plant) brines as a function of pC H+ in the presence and absence of WIPP-relevant organic ligands (EDTA [Ethylenediaminetetraacetic acid], oxalate, citrate, acetate) and iron corrosion products (magnetite and metallic iron) at 𝑇 = 23 ± 2 ∘C was thoroughly studied by long-term batch solubility experiments (between approximately 800-1,100 days) from an undersaturation approach. The oxidation state of Pu in the WIPP environment has been a topic of interest since the initial Compliance Certification Application (CCA). This study aims to investigate the solubility of Pu under the expected WIPP conditions and to determine the oxidation state of the solid phase that will control the solubility. One of the most important results of this study is that the Pu oxidation state was analyzed both from the surface area of the corrosion products and in the precipitated solid. The analysis of the Pu oxidation state on the surface of the iron mineral from the ongoing undersaturated experiments is more relevant to the performance assessment of nuclear waste disposal than short term batch (plutonium-iron phase) experiments. The X-ray Absorption Near-Edge Spectroscopy (XANES) analysis showed that Pu oxidation state is different on the metal surface and in the precipitated solid. Pu(III) is the dominant oxidation state in the metallic iron (Fe 0 ) system in the presence and absence of organics. Pu(IV) is the dominant oxidation state in the magnetite system in the presence and absence of organics. Also, organics stabilize Pu(IV) in the magnetite system. Analysis of Pu in the precipitated solid by Extended X-ray Absorption Fine Structure (EXAFS) analysis showed that Pu formed an inner-sphere complex with iron with minor amounts of PuO 2 present. X-ray diffraction (XRD) results indicate that metallic iron and magnetite did not oxidize in three years in the alkaline and high ionic strength system. Under these conditions (8 < pC H+ < 10 at T = (22 ± 2) °C under nitrogen atmosphere, the solubility of Pu changes by up to three orders of magnitude (10 -5 and 10 -8 M). The spread in solubility is highest at pC H+ = 9. Pu(III) and Pu(IV) showed different solubility behavior in the synthetic WIPP brine. A summary of the data collected in this report will be submitted to Sandia National Laboratories as part of a parameter update report which will outline the changes to the OXSTAT parameter for the 2026 Compliance Recertification Application (CRA-2026). The experiments performed were done according to the U.S. Department of Energy (DOE) approved Test Plan entitled “Effects of Radiolysis, Organic Complexation, and Redox Conditions on the Speciation and Oxidation State Distribution of Pu(III/IV)” (LCO-ACP-25). All data reported were obtained under the Los Alamos National Laboratory-Carlsbad Office (LANL-CO) Quality Assurance Program, which is compliant with the DOE Carlsbad Field Office, Quality Assurance Program Document (CBFO/QAPD).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

State Preparation in Quantum Algorithms for Fragment-Based Quantum Chemistry

State preparation for quantum algorithms is crucial for achieving high accuracy in quantum chemistry and competing with classical algorithms. The localized active space–unitary coupled cluster (LAS–UCC) algorithm iteratively loads a fragment-based multireference wave function onto a quantum computer. Here, in this study, we compare two state preparation methods, quantum phase estimation (QPE) and direct initialization (DI), for each fragment. We test the two state preparation methods on three systems, ranging from a model system, a set of interacting hydrogen molecules, to more realistic chemical problems, like the C–C double bond breaking in transbutadiene and the spin ladder in a bimetallic system. We analyze the impact of QPE parameters, such as the number of ancilla qubits and Trotter steps, on the prepared state. We find a trade-off between the methods, where DI requires fewer resources for smaller fragments, while QPE is more efficient for larger fragments. Our resource estimates highlight the benefits of system fragmentation in state preparation for subsequent quantum chemical calculations. These findings have broad applications for preparing multireference quantum chemical wave functions on quantum circuits that can be used for realistic chemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗