Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Thermoelectric Enhancement in PbTe with K or Na codoping from tuning the interaction of the light- and heavy-hole valence bands

The effect of K and K-Na substitution for Pb atoms in the rocksalt lattice of PbTe was investigated to test a hypothesis for development of resonant states in the valence band that may enhance the thermoelectric power. We combined high-temperature Hall-effect, electrical conductivity, and thermal conductivity measurements to show that K-Na codoping do not form resonance states but can control the energy difference of the maxima of the two primary valence subbands in PbTe. This leads to an enhanced interband interaction with rising temperature and a significant rise in the thermoelectric figure of merit of p -type PbTe. The experimental data can be explained by a combination of a single- and two-band models for the valence band of PbTe depending on hole density that varies in the range of 1–15x10 19 cm -3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NAS Parallel Benchmark. Results 11-96: Performance Comparison of HPF and MPI Based NAS Parallel Benchmarks

High Performance Fortran (HPF), the high-level language for parallel Fortran programming, is based on Fortran 90. HALF was defined by an informal standards committee known as the High Performance Fortran Forum (HPFF) in 1993, and modeled on TMC's CM Fortran language. Several HPF features have since been incorporated into the draft ANSI/ISO Fortran 95, the next formal revision of the Fortran standard. HPF allows users to write a single parallel program that can execute on a serial machine, a shared-memory parallel machine, or a distributed-memory parallel machine. HPF eliminates the complex, error-prone task of explicitly specifying how, where, and when to pass messages between processors on distributed-memory machines, or when to synchronize processors on shared-memory machines. HPF is designed in a way that allows the programmer to code an application at a high level, and then selectively optimize portions of the code by dropping into message-passing or calling tuned library routines as 'extrinsics'. Compilers supporting High Performance Fortran features first appeared in late 1994 and early 1995 from Applied Parallel Research (APR) Digital Equipment Corporation, and The Portland Group (PGI). IBM introduced an HPF compiler for the IBM RS/6000 SP/2 in April of 1996. Over the past two years, these implementations have shown steady improvement in terms of both features and performance. The performance of various hardware/ programming model (HPF and MPI (message passing interface)) combinations will be compared, based on latest NAS (NASA Advanced Supercomputing) Parallel Benchmark (NPB) results, thus providing a cross-machine and cross-model comparison. Specifically, HPF based NPB results will be compared with MPI based NPB results to provide perspective on performance currently obtainable using HPF versus MPI or versus hand-tuned implementations such as those supplied by the hardware vendors. In addition we would also present NPB (Version 1.0) performance results for the following systems: DEC Alpha Server 8400 5/440, Fujitsu VPP Series (VX, VPP300, and VPP700), HP/Convex Exemplar SPP2000, IBM RS/6000 SP P2SC node (120 MHz) NEC SX-4/32, SGI/CRAY T3E, SGI Origin2000.

Saini, Subash↗

A case study of tuning MapReduce for efficient Bioinformatics in the cloud

The combination of the Hadoop MapReduce programming model and cloud computing allows biological scientists to analyze next-generation sequencing (NGS) data in a timely and cost-effective manner. Cloud computing platforms remove the burden of IT facility procurement and management from end users and provide ease of access to Hadoop clusters. However, biological scientists are still expected to choose appropriate Hadoop parameters for running their jobs. More importantly, the available Hadoop tuning guidelines are either obsolete or too general to capture the particular characteristics of bioinformatics applications. In this paper, we aim to minimize the cloud computing cost spent on bioinformatics data analysis by optimizing the extracted significant Hadoop parameters. When using MapReduce-based bioinformatics tools in the cloud, the default settings often lead to resource underutilization and wasteful expenses. We choose k-mer counting, a representative application used in a large number of NGS data analysis tools, as our study case. Experimental results show that, with the fine-tuned parameters, we achieve a total of 4× speedup compared with the original performance (using the default settings). Finally, this paper presents an exemplary case for tuning MapReduce-based bioinformatics applications in the cloud, and documents the key parameters that could lead to significant performance benefits.

97 MATHEMATICS AND COMPUTING↗

Performance Limits of an Alternating Current Electroluminescent Device

Abstract The use of an alternating current (AC) voltage is a simple, versatile method of producing electroluminescence from generic emissive materials without the need for contact engineering. Recently, it was shown that AC‐driven, capacitive electroluminescent devices with carbon nanotube network contacts can be used to generate and study electroluminescence from a variety of molecular materials emitting in the infrared‐to‐ultraviolet range. Here, performance trade‐offs in these devices are studied through comprehensive device simulations and illustrative experiments, enhancing understanding of the mechanism and capability of electroluminescent devices based on alternating as opposed to direct current (DC) schemes. AC‐driven electroluminescent devices can overcome several limitations of conventional DC‐driven electroluminescent devices, including the requirement for proper alignment of material energy levels and the need to process emitting materials into uniform thin films. By simultaneously optimizing device geometry, driving parameters, and material characteristics, the performance of these devices can be tuned. Importantly, the turn‐on voltage of AC‐driven electroluminescent devices approaches the bandgap of the emitting material as the gate oxide thickness is scaled, and internally efficient electroluminescence can be achieved using low‐mobility single‐layer emitter films with varying thicknesses and energy barrier heights relative to the contact.

Wang, Vivian↗

Confinement‐Driven Inverse Domain Scaling in Polycrystalline ErMnO 3

Abstract The research on topological phenomena in ferroelectric materials has revolutionized the way people understand polar order. Intriguing examples are polar skyrmions, vortex/anti‐vortex structures, and ferroelectric incommensurabilties, which promote emergent physical properties ranging from electric‐field‐controllable chirality to negative capacitance effects. Here, the impact of topologically protected vortices on the domain formation in improper ferroelectric ErMnO 3 polycrystals is studied, demonstrating inverted domain scaling behavior compared to classical ferroelectrics. It is observed that as the grain size increases, smaller domains are formed. Phase field simulations reveal that elastic strain fields drive the annihilation of vortex/anti‐vortex pairs within the grains and individual vortices at the grain boundaries. The inversion of the domain scaling behavior has far‐reaching implications, providing fundamentally new opportunities for topology‐based domain engineering and the tuning of the electromechanical and dielectric performance of ferroelectrics in general.

36 MATERIALS SCIENCE↗

Impact of Halogen Groups on the Properties of PEA–Based 2D Pb–Sn Halide Perovskites

Tuning broad emission in 2D Pb–Sn halide perovskites (HPs) is essential for advancing optoelectronic applications, particularly for color-tunable and white-light-emitting devices. This broad emission is linked to structural factors, such as defects and phase segregation of the Pb component within the Pb–Sn system, which are strongly influenced by the molecular structure and chemical properties of spacer cations. Atomic tuning of the spacers via halogenation opens up a new way to fine-tune the molecular properties, enabling further augmentations of HP functionalities. Nevertheless, the distinct broad emission's sensitivity to spacer chemistry remains underexplored. Here, halogenation's influence is systematically investigated on 2D HP emission characteristics using a high-throughput workflow. These findings reveal that the F-containing phenethylammonium (4F-PEA) spacer narrows the broadband PL, whereas Cl broadens it. Through a correlative study, it is found that 4F-PEA reduces not only the local phase segregation but also the defect levels and microstrains in 2D HPs. This is likely attributed to the manifestation of less lattice distortion via stronger surface coordination of the dipole-augmented 4F-PEA. Furthermore, these results highlight halogenation as a key factor in modulating phase segregation and defect density in 2D Pb–Sn HPs, offering a promising pathway to tune the emission for enhanced optoelectronic performance.

2D Pb-Sn halide perovskites↗

Atomistic Insights of Irreversible Li + Intercalation in MnO 2 Electrode

Tunnel-structured MnO 2 represents open-framed electrode materials for reversible energy storage. Its wide application is limited by its poor cycling stability, whose structural origin is unclear. We tracked the structure evolution of β-MnO 2 upon Li + ion insertion/extraction by combining advanced in situ diagnostic tools at both electrode level (synchrotron X-ray scattering) and single-particle level (transmission electron microscopy). The instability is found to originate from a partially reversible phase transition between β-MnO 2 and orthorhombic LiMnO 2 upon lithiation, causing cycling capacity decay. Moreover, the MnO 2 /LiMnO 2 interface exhibits multiple arrow-headed disordered regions, which severely chop into the host and undermine its structural integrity. Our findings could account for the cycling instability of tunnel-structured materials, based on which future strategies should focus on tuning the charge transport kinetics toward performance enhancement.

25 ENERGY STORAGE↗

Methanol Fractionation of Softwood Kraft Lignin: Impact on the Lignin Properties

The development of technologies to tune lignin properties for high-performance lignin-based materials is crucial for the utilization of lignin in various applications. Here, the effect of methanol (MeOH) fractionation on the molecular weight, molecular weight distribution, glass transition temperature (Tg), thermal decomposition, and chemical structure of lignin were investigated. Repeated MeOH fractionation of softwood Kraft lignin successfully removed the low-molecular-weight fraction. The separated high-molecular-weight lignin showed a Tg of 211 C and a char yield of 47%, much higher than those of asreceived lignin (Tg 153 C, char yield 41%). The MeOH-soluble fraction of lignin showed an increased low-molecular-weight fraction and a lower Tg (117 C) and char yield (32%). The amount of low-molecular-weight fraction showed a quantitative correlation with both 1/Tg and char yield in a linear regression. This study demonstrated the efficient purification or fractionation technology for lignin; it also established a theoretical and empirical correlation between the physical characteristics of fractionated lignins.

Saito, Tomonori↗

Rational optimization of substituted α–MnO 2 cathode for aqueous zinc–ion battery

Density functional theory (DFT) is utilized to explore the effects of increasing concentrations of vanadium (V) and chromium (Cr) substitution on the discharge of α-MnO 2 cathode in hydrated zinc-ion batteries (ZIBs). During H + -intercalation and Zn 2+ -intercalation, Cr-substitution proves to be more effective than V-substitution in promoting discharge behaviors. Transitioning from Mn 0.875 Cr 0.125 O 2 , Mn 0.75 Cr 0.25 O 2 to Mn 0.625 Cr 0.375 O 2 is found to consistently enhance the discharge voltage, along with improved tunnel structure retention and volume expansion suppression. In comparison, the promoting effect of increasing V-substitution is relatively small at initial discharge stages and leads to degradation at later stages, primarily due to an increased concentration of unstable Mn 2+ ion. The superior effect of Cr-substitution is attributed to the unique atomic and electronic structures of substituted Cr 4+ and reduced Cr 3+ ions during discharge. These ions serve as active electron acceptors to limit the formation of Mn 3+ and Mn 2+ ions, and as anchors to stabilize the α-MnO 2 framework and intercalated H + /Zn 2+ ions, respectively. Finally, our study highlights fine-tuning through substitution to enhance the performance of α-MnO 2 -based cathode materials in ZIBs.

25 ENERGY STORAGE↗

Lewis Acid Site Engineering in Chromite Spinels Orchestrated Surface Reconstruction and Surpasses RuO 2 in Oxygen Evolution

Atomic-scale engineering of chromite spinels featuring redox-active tetrahedral A-sites and strong Cr–O covalency offers a promising route to superior platinum-group-metal-free oxygen evolution reaction (OER) catalysts. However, comprehensive studies addressing how cation substitution influences surface chemistry and governs OER activity and durability in chromite spinels remain limited. Here, in this work, a systematic investigation of the multicationic chromite series Ni x Fe y Cr 3−x−y O 4 is presented, identifying composition-dependent Lewis acidity as a descriptor of superior OER performance. It is further demonstrated that tuning surface acidity directly controls dynamic reconstruction processes and lattice-oxygen participation during spinel-based electrocatalysis. Following activation, the optimized Ni 0.8 Fe 0.3 Cr 1.9 O 4 catalyst delivers a current density of 10 mA cm −2 at an overpotential of 235 mV, surpassing RuO 2 , with excellent long-term stability. Integrating microscopic and spectroscopic analysis with operando impedance spectroscopy, it shows that activation generates an oxyhydroxide overlayer and reveals a previously unrecognized link between surface Lewis acidity and the growth kinetics and activity of these shells. Density functional theory calculations indicate that Fe incorporation at octahedral sites raises the O 2p-band center and lowers oxygen-vacancy formation energy, promoting lattice-oxygen activation and triggering reconstruction, yielding enhanced OER. This work integrates cation-driven surface-acidity modulation, acidity-governed reconstruction, and OER activity enhancement into a unified predictive framework for designing earth-abundant spinel-based catalysts.

operando impedance spectroscopy↗

Enhancing Photovoltaic Performance of Aromatic Ammonium-based Two-Dimensional Organic-Inorganic Hybrid Perovskites via Tuning CH···π Interaction

Phenethylammonium (PEA)-based 2D perovskite is an interesting example of 2D perovskites, serving as the gateway for further introduction of functional conjugated organic cations into 2D perovskites for a variety of applications, for example, photovoltaics. However, the efficiency of photovoltaic devices based on PEA 2D perovskites only achieved ≈7% for = 3, which was significantly lower than that achieved for other cation-based 2D perovskites. In this work, by introducing propyl ammonium (C3A) into the PEA-based 2D perovskites, the device efficiency is improved to ≈10% for 1:1 C3A:PEA-based 2D perovskites ( = 3). Further investigation reveals that tuning the CH···π interaction (between C3A and PEA or between two PEA molecules) can have multiple beneficial impacts on such modified 2D perovskites, including a) removal of undesirable n = 1 phase, b) lowering the density of trap states, and c) achieving larger crystalline grains. Additionally, after substitution with 50% C3A, other aromatic ammonium cation-based 2D perovskites ( = 3) also show similar efficiency enhancement in their photovoltaic devices, thus exhibiting the general applicability of this method. The results of this study highlight that the strategic tuning of non-covalent interactions (such as CH···π interaction) is a viable and important method to further develop 2D perovskites for photovoltaics.

14 SOLAR ENERGY↗

The impact of neutrino-nucleus interaction modeling on new physics searches

Accurate neutrino-nucleus interaction modeling is an essential requirement for the success of the accelerator-based neutrino program. As no satisfactory description of cross sections exists, experiments tune neutrino-nucleus interactions to data to mitigate mis-modeling. In this work, we study how the interplay between near detector tuning and cross section mis-modeling affects new physics searches. We perform a realistic simulation of neutrino events and closely follow NOvA’s tuning, the first published of such procedures in a neutrino experiment. We analyze two illustrative new physics scenarios, sterile neutrinos and light neutrinophilic scalars, presenting the relevant experimental signatures and the sensitivity regions with and without tuning. While the tuning does not wash out sterile neutrino oscillation patterns, cross section mis-modeling can bias the experimental sensitivity. In the case of light neutrinophilic scalars, variations in cross section models completely dominate the sensitivity regardless of any tuning. Our findings reveal the critical need to improve our theoretical understanding of neutrino-nucleus interactions, and to estimate the impact of tuning on new physics searches. We urge neutrino experiments to follow NOvA’s example and publish the details of their tuning procedure, and to develop strategies to more robustly account for cross section uncertainties, which will expand the scope of their physics program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Molecular Assembly-Induced Charge Transfer for Programmable Functionalities

The donor–acceptor interface within molecular charge transfer (CT) solids plays a vital role in the hybridization of molecular orbitals to determine their carrier transport and electronic delocalization. In this study reported herein, we demonstrate molecular assembly-driven bilayer and crystalline solids, consisting of electron donor dibenzotetrathiafulvalene (DBTTF) and acceptor C 60 , in which interfacial engineering-induced CT degree control is a key parameter for tuning its optical, electronic, and magnetic performance. Compared to the DBTTF/C 60 bilayer structure, the DBTTFC 60 cocrystalline solids show a stronger degree of charge transfer for broad CT absorption and a large dielectric constant. In addition, the DBTTFC 60 cocrystals exhibit distinct CT arrangement-driven anisotropic electron mobility and spin characteristics, which further enables the development of high-penetration and high-energy $γ$-ray photodetectors. The results presented in this paper provide a basis for the design and control of molecular charge transfer solids, which facilitates the integration of such materials into molecular electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene-Supported Monometallic and Bimetallic Dimers for Electrochemical CO 2 Reduction

Bimetallic catalysts are attractive alternatives to extend the parameter space that can be tuned for support interactions and catalytic performance. In this study, we have investigated the smallest bimetallic catalysts dimers supported on defective graphene for the electrochemical reduction of CO 2 to CH 4 based on a first-principles approach and the computational hydrogen electrode model. The monometallic and bimetallic dimers formed from Group 10 (Ni, Pd, Pt) and group 11 (Cu, Ag, Au) elements are characterized by a positively charged anchoring atom occupying the vacancy site of graphene and a neutral or slightly negatively charged antenna atom sticking out from the graphene surface. The strong selective binding of these dimers ensures their high stability. Possible rate-limiting steps are identified from the full reaction pathways to generate CH4. Overall, Pt-2, AgNi, Pd-2, and AgPt are the best candidates with the lowest overpotential values of 0.37, 0.69, 0.69, and 0.76 V, respectively. It is found that the alloy effect and the interaction with support help to optimize the property. These metallic dimers, however, retain nonmonotonous property relationships that give opportunity to go beyond scaling behavior and look for a few atom catalysts that have unique properties to reduce rate-limiting potentials and improve the catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Examining Metal Identity and Proximity Effects on Acetylene Hydrogenation with Azolate-Based MOFs

Liquid organic hydrogen carriers (LOHCs) are an attractive fuel source due to their compatibility with existing transportation methods and ease of use. However, they suffer from sluggish (de)hydrogenation kinetics. One promising platform for developing next-generation catalysts is metal–organic frameworks (MOFs), which can enable systematic interrogation into the influence of metal identity and spatial arrangement. In this study, the effect of the coordination environment was investigated using Ni- and Co-based azolate MOFs: MFU-4l-OH (M x Zn 5–x (OH) 4 (BTDD) 3 ; x = 4 for M = Co and x = 3 for M = Ni, H 2 BTDD = bis(1H-1,2,3-triazolo[4,5-b][4′,5′-i])dibenzo[1,4]dioxin), composed of single-site nodes, and M(OH) 2 BBTA (M = Ni, Co; H 2 BBTA = 1H,5H-benzo(1,2-d:4,5-d’)bistriazole), composed of extended chain-type nodes. The catalysts were characterized by isotherms, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photoelectron spectroscopy (XPS) analysis. Acetylene hydrogenation activity under steady state conditions (150 °C, 1:1 C 2 H 2 :H 2 ) revealed higher turnover frequencies (TOFs) up 1.17 × 10 –2 mol C 2 H 2 mol −1 Ni min −1 and 1.98 × 10 –3 mol C 2 H 2 mol −1 Co min −1 for Ni-MFU-4l-OH and Co-MFU-4l-OH, respectively, compared to their BBTA analogues. However, the Co-based MOFs, particularly Co 2 (OH) 2 -BBTA, exhibited greater selectivity (up to 19%) for the fully hydrogenated ethane product. Isosteric heat of adsorption (Q st ) measurements for ethylene and ethane revealed that the BBTA framework had stronger binding to the products than MFU-4l. Furthermore, these findings demonstrate that metal identity and coordination environment may modulate acetylene hydrogenation performance, leading to design principles for tuning LOHC hydrogenation catalysts.

catalysts↗

Local Electronic Structure Changes in Polycrystalline CdTe with CdCl 2 Treatment and Air Exposure

Postdeposition CdCl 2 treatment of polycrystalline CdTe is known to increase the photovoltaic device efficiency. However, the precise chemical, structural, and electronic changes that underpin this improvement are still debated. In this work, spectroscopic photoemission electron microscopy was used to spatially map the vacuum level and ionization energy of CdTe films, enabling the identification of electronic structure variations between grains and grain boundaries (GBs). In vacuo preparation and inert transfer of oxide-free CdTe surfaces isolated the separate effects of CdCl 2 treatment and ambient oxygen exposure. Qualitatively, grain boundaries displayed lower work function and downward band bending relative to grain interiors, but only after air exposure of CdCl 2 -treated CdTe. Analysis of numerous space charge regions at grain boundaries showed an average depletion width of 290 nm and an average band bending magnitude of 70 meV, corresponding to a GB trap density of 10 11 cm –2 and a net carrier density of 10 15 cm –3 . Finally, these results suggest that both CdCl 2 treatment and oxygen exposure may be independently tuned to enhance the CdTe photovoltaic performance by engineering the interface and bulk electronic structure.

36 MATERIALS SCIENCE↗

Strong Effect of B-Site Substitution on the Reactivity of Layered Perovskite Oxides Probed via Isopropanol Conversion

Perovskite oxides have exhibited promising catalytic performance in photocatalysis, electrocatalysis, and thermocatalysis, and the performance can be potentially enhanced by tuning their flexible electronic and crystal structure. The B cations play essential roles in altering the inherent electronic structure and catalytic activity of these perovskite and related layered perovskite oxides. In this work, we establish the relationship of composition (electronic structure) and activity/selectivity of layered perovskites for pure and B-site-substituted Sr 2 Sn 1–x Ru x O 4 (0 ≤ x ≤ 1). The isopropanol decomposition was chosen as the probe reaction because its divergent reaction pathways through either dehydration or dehydrogenation are sensitive to the solid-state properties of the metal oxide surface. Both parent layered perovskite oxides of Sr 2 SnO 4 and Sr 2 RuO 4 exhibited decent conversion (20%–30%) and selectivity (>80%) to acetone through dehydrogenation pathways over a temperature range of 280–320 °C under atmospheric pressure, while the substituted perovskites, even with 10 at. % substitution of Ru at the B-site showed remarkable enhancement for both activity and selectivity toward acetone. Further, by varying the dopant concentration linearly, both activity and selectivity showed a volcano-shaped dependency on the atomic concentration of the substituent. Overall, the Sr 2 Sn 0.3 Ru 0.7 O 4 had the best yield of acetone, which may be ascribed to the optimal eg filling state of the B site for appropriate B–O bond strength during oxygenate adsorption. The current research provides a guide to the rational design of perovskite oxide catalysts for efficient chemical transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗