Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parallel systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Translational research in the MPICH project

The MPICH project is an example of translational research in computer science before that term was well known or even coined. The project began in 1992 as an effort to develop a portable, high-performance implementation of the emerging Message-Passing Interface (MPI) Standard. It has enabled the widespread adoption of MPI as a way to write scalable parallel applications on systems of all sizes including upcoming exascale supercomputers. In this paper, we describe how the translational research process was used in MPICH, how that led to its success, the challenges encountered and lessons learned, and how the process could be applied to other similar projects.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Hardware Design and Demonstration of a 100kW, 99% Efficiency Dual Active Half Bridge Converter Based on 1700V SiC Power MOSFET

High efficiency, high density and galvanically isolated power converters are attractive for numerous medium voltage high power applications. This paper presents a 1.5kVdc, 100kW bidirectional Dual Active Half Bridge (DAHB) using newly developed 1.7kV SiC MOSFET modules. The DAHB achieved an efficiency of 98.6% at full load of 100kW and a maximum of 99% at 45kW, operating as an isolated DC/DC converter. The converter also achieved an efficiency of 97.8% operating as an isolated DC/AC inverter. An optimized PCB-based busbar design has significantly reduced the voltage overshoot across the device, making the design suitable for 1500Vdc input application such as 1500V PV inverters. Typical partial discharge inception voltage (PDIV) of the optimized PCB busbar is 1.7kVpeak with total charge <10pC. The power density of the DAHB converter is 1.8MVA/m 3 which is much higher than traditional two-stage industry products. The DAHB converter can be used as a building block for a 4.16kV/1MVA utility scale PV systems with input parallel and output series configuration.

Xu, Wei↗
DOE OSTI2021

BeeSwarm: Enabling Parallel Scaling Performance Measurement in Continuous Integration for HPC Applications

Testing is one of the most important steps in software development–it ensures the quality of software. Continuous Integration (CI) is a widely used testing standard that can report software quality to the developer in a timely manner during development progress. Performance, especially scalability, is another key factor for High Performance Computing (HPC) applications. There are many existing profiling and performance tools for HPC applications, but none of these are integrated into CI tools. In this work, we propose BeeSwarm, an HPC container based parallel scaling performance system that can be easily applied to the current CI test environments. BeeSwarm is mainly designed for HPC application developers who need to monitor how their applications can scale on different compute resources. We demonstrate BeeSwarm using a multi-physics HPC application with Travis CI, GitLab CI and GitHub Actions while using ChameleonCloud and Google Compute Engine as the compute backends. Finally, our results show that BeeSwarm can be used for scalability and performance testing of HPC applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Secondary Use-Plug-and-Play Energy Storage System Composed of Multiple Energy Storage Technologies

Low-cost, grid-connectable energy storage technologies represent a significant challenge for the electric grid of the future. Energy storage technologies are in rapid development with targets to reduce the storage medium cost. However, a significant cost to deployment also comes in the integration. This paper presents the development of a plug-and-play system for supporting secondary use multiple battery systems into a single grid connectable unit. Results of the system design are demonstrated in a controller hardware in the loop (CHIL) platform. Simulations of two energy storage systems operating in parallel and dispatched optimally are presented.

Starke, Michael↗
DOE OSTI2020

PLEXUS: A Pattern-Oriented Runtime System Architecture for Resilient Extreme-Scale High-Performance Computing Systems

For high-performance computing (HPC) system designers and users, meeting the myriad challenges of next-generation exascale supercomputing systems requires rethinking their approach to application and system software design. Among these challenges, providing resiliency and stability to the scientific applications in the presence of high fault rates requires new approaches to software architecture and design. As HPC systems become increasingly complex, they require intricate solutions for detection and mitigation for various modes of faults and errors that occur in these large-scale systems, as well as solutions for failure recovery. These resiliency solutions often interact with and affect other system properties, including application scalability, power and energy efficiency. Therefore, resilience solutions for HPC systems must be thoughtfully engineered and deployed.In previous work, we developed the concept of resilience design patterns, which consist of templated solutions based on well-established techniques for detection, mitigation and recovery. In this paper, we use these patterns as the foundation to propose new approaches to designing runtime systems for HPC systems. The instantiation of these patterns within a runtime system enables flexible and adaptable end-to-end resiliency solutions for HPC environments. The paper describes the architecture of the runtime system, named Plexus, and the strategies for dynamically composing and adapting pattern instances under runtime control. This runtime-based approach enables actively balancing the cost-benefit trade-off between performance overhead and protection coverage of the resilience solutions. Based on a prototype implementation of PLEXUS, we demonstrate the resiliency and performance gains achieved by the pattern-based runtime system for a parallel linear solver application.

Hukerikar, Saurabh↗
DOE OSTI2023

libEnsemble: A complete Python toolkit for dynamic ensembles of calculations

Almost all science and engineering applications eventually stop scaling: their runtime no longer decreases as available computational resources increase. Therefore, many applications will struggle to efficiently use emerging extreme-scale high-performance, parallel, and distributed systems. libEnsemble is a complete Python toolkit and workflow system for intelligently driving ensembles of experiments or simulations at massive scales. It enables and encourages multidisciplinary design, decision, and inference studies portably running on laptops, clusters, and supercomputers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Open Source Platform for Live Processing of High Data Rate Electron Microscopy (SBIR Phase I Award Topic 15, Subtopic B, Final Scientific / Technical Report)

4D scanning transmission electron microscopy (STEM) is experiencing a revolution both in terms of data size, and data veracity, as are many other areas of experimental data acquisition. This presents enormous opportunities to make new scientific discoveries, but is also hamstrung by aging software that is no longer fit for purpose. Experimental data acquisition platforms must make the same investments in software infrastructure that the simulation community made decades ago to take advantage of high-performance computing (HPC) if they hope to realize the full potential of the latest advances made in detector technology. This requires rethinking the design and deployment of hardware, moving away from small, fixed commodity computing capabilities with closed interfaces to open, modular, scalable systems designed for parallelism and throughput. The technical approach will leverage best-in-class open source technologies, and develop new approaches strategically to build an open source platform for experimental data acquisition targeting high data rate electron microscopy. The project will develop a software platform that uses the power and performance of modern HPC resources to ingest the large volume of data produced by electron microscopes using direct electron detectors. A set of configurable pipelines will be used to enable the processing to be tailored to the problem being investigated with builtin visualization of data at interactive rates. This project will leverage investments made by the DOE and other agencies to provide a powerful software platform for the experimental data community working with most powerful electron microscopes, such as 4D STEM detectors. It will create a platform that serves as a reference for the community. Permissive open source licensing will make the platform available to all, with a simple deployment strategy offering the ability to keep data close to where it is generated. This advanced software platform will require customization for each deployment, creating opportunities for software services that are typically offered to extend open source software platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

In Situ High-Temperature Ultrafast Electron Diffraction through Integrated Furnace and MEMS Platforms

Temperature fundamentally governs phase stability, defect evolution, and transport behavior in materials. Despite its central role, direct measurements of structural evolution at elevated temperatures on ultrafast timescales have remained limited. Here, we report the design, integration, and validation of 2 complementary in situ heating platforms that substantially extend the thermal operating range of ultrafast electron diffraction (UED). A compact furnace-type heating stage enables stable diffraction measurements from room temperature to 800 K with ±0.1 K stability under ultrahigh vacuum, achieved through multi-sensor feedback control, dual air-cooling channels, and a thermally isolated motion stage. In parallel, a microelectromechanical system (MEMS)-based heating platform provides rapid thermal response and access to extreme temperatures ≥1,373 K with ±0.1 K stability over hundreds-micrometer regions while supporting simultaneous electrical biasing for electrothermal coupling studies. Absolute temperature calibration is established using diffraction-based thermometry via aluminum lattice expansion and independently validated through in situ melting of bismuth thin films. UED measurements further reveal pronounced temperature-dependent nonequilibrium lattice dynamics in bismuth, including modifications to electron–phonon coupling and Debye–Waller behavior, as well as enhanced ultrafast diffuse scattering in aluminum at elevated temperatures. Together, these developments establish a practical framework for quantitative, time-resolved studies of temperature-driven kinetics and nonequilibrium structural dynamics under extreme thermal environments.

Bai, Qianqian [Chinese Academy of Sciences (CAS), ↗
NASA NTRS1972

A remote manipulator system for the space shuttle.

Shuttle mission objectives are examined. The outstanding characteristic of the payload handling system will be its versatility. A practical system is needed that combines man's adaptability, skill, and reflexes with the strength, endurance, and relative indestructibility of a machine. Systems that meet these standards, called teleoperators, have been in use for many years. The other half of the problem, the retention of man's natural manipulative skills, is solved by use of a 'master-slave' control system. Two independent, parallel preliminary design studies based on the requirements considered were conducted.

Livingston, L. E.↗
NASA NTRS1975

Rigid format alter packets for the analysis of electromagnetic field problems

The computer program NASTRAN is used to solve electromagnetic field problems. The diffusion equation and the boundary conditions valid for problems of these kinds together with a replacing potential energy function are given. The extent to which an analogy with finite element displacement and temperature approaches holds is indicated. The outputting of complex quantities is made possible after adjustment of standard rigid format 1 input data blocks to module SDR2. The applications made involve the study of the proximity effect in a system of three parallel conductors and the analysis of the magnetic field in the vicinity of the points of contact in circuit breakers.

Spreeuw, E.↗
NASA NTRS1975

Advances in automatic extraction of information from multispectral scanner data

The state-of-the-art of automatic multispectral scanner data analysis and interpretation is reviewed. Sources of system variability which tend to obscure the spectral characteristics of the classes under consideration are discussed, and examples of the application of spatial and temporal discrimination bases are given. Automatic processing functions, techniques and methods, and equipment are described with particular attention to those that are applicable to large land surveys using satellite data. The development and characteristics of the Multivariate Interactive Digital Analysis System (MIDAS) for processing aircraft or satellite multispectral scanning data are discussed in detail. The MIDAS system combines the parallel digital implementation capabilities of a low-cost processor with a general purpose PDP-11/45 minicomputer to provide near-real-time data processing. The preprocessing functions are user-selectable. The input subsystem accepts data stored on high density digital tape, computer compatible tape, and analog tape.

Erickson, J. D.↗
NASA NTRS1979

Optical memories in digital computing

High capacity optical memories with relatively-high data-transfer rate and multiport simultaneous access capability may serve as basis for new computer architectures. Several computer structures that might profitably use memories are: a) simultaneous record-access system, b) simultaneously-shared memory computer system, and c) parallel digital processing structure.

Alford, C. O.↗
NASA NTRS1980

Design of a massively parallel processor

The massively parallel processor (MPP) system is designed to process satellite imagery at high rates. A large number (16,384) of processing elements (PE's) are configured in a square array. For optimum performance on operands of arbitrary length, processing is performed in a bit-serial manner. On 8-bit integer data, addition can occur at 6553 million operations per second (MOPS) and multiplication at 1861 MOPS. On 32-bit floating-point data, addition can occur at 430 MOPS and multiplication at 216 MOPS.

Batcher, K. E.↗
NASA NTRS1983

The value of residential photovoltaic systems: A comprehensive assessment

Utility-interactive photovoltaic (PV) arrays on residential rooftops appear to be a potentially attractive, large-scale application of PV technology. Results of a comprehensive assessment of the value (i.e., break-even cost) of utility-grid connected residential photovoltaic power systems under a variety of technological and economic assumptions are presented. A wide range of allowable PV system costs are calculated for small (4.34 kW (p) sub ac) residential PV systems in various locales across the United States. Primary factor in this variation are differences in local weather conditions, utility-specific electric generation capacity, fuel types, and customer-load profiles that effect purchase and sell-back rates, and non-uniform state tax considerations. Additional results from this analysis are: locations having the highest insolation values are not necessary the most economically attractive sites; residential PV systems connected in parallel to the utility demonstrate high percentages of energy sold back to the grid, and owner financial and tax assumptions cause large variations in break-even costs. Significant cost reduction and aggressive resolution of potential institutional impediments (e.g., liability, standards, metering, and technical integration) are required for a residential PV marker to become a major electric-grid-connected energy-generation source.

Borden, C. S.↗
NASA NTRS1983

Measurement of ultrasonic fields in transparent media using a scanning differential interferometer

An experimental system for the detection of three dimensional acoustic fields in optically transparent media using a dual beam differential interferometer is described. In this system, two coherent, parallel, focused laser beams are passed through the specimen and the interference fringe pattern which results when these beams are combined shifts linearly by an amount which is related to the optical pathlength difference between the two beams. It is shown that for small signals, the detector output is directly proportional to the amplitude of the acoustic field integrated along the optical beam path through the specimen. A water tank and motorized optical platform were constructed to allow these dual beams to be scanned through an ultrasonic field generated by a piezoelectric transducer at various distances from the transducer. Scan data for the near, Fresnel, and far zones of a uniform, circular transducer are presented and an algorithm for constructing the radial field profile from this integrated optical data, assuming cylindrical symmetry, is described.

Dockery, G. D.↗
NASA NTRS1986

Investigation of chemically reacting and radiating supersonic internal flows

The two-dimensional spatially elliptic Navier-Stokes equations are used to investigate the chemically reacting and radiating supersonic flow of the hydrogen-air system between two parallel plates and in a channel with a ten degree compression-expansion ramp at the lower boundary. The explicit unsplit finite-difference technique of MacCormack is used to advance the governing equations in time until convergence is achieved. The chemistry source term in the species equation is treated implicitly to alleviate the stiffness associated with fast reactions. The tangent slab approximation is employed in the radiative flux formation. Both pseudo-gray and nongray models are used to represent the absorption characteristics of the participating species. Results obtained for specific conditions indicate that the radiative interaction can have a significant influence on the flow field.

Mani, M.↗
NASA NTRS1987

MPF: A portable message passing facility for shared memory multiprocessors

The design, implementation, and performance evaluation of a message passing facility (MPF) for shared memory multiprocessors are presented. The MPF is based on a message passing model conceptually similar to conversations. Participants (parallel processors) can enter or leave a conversation at any time. The message passing primitives for this model are implemented as a portable library of C function calls. The MPF is currently operational on a Sequent Balance 21000, and several parallel applications were developed and tested. Several simple benchmark programs are presented to establish interprocess communication performance for common patterns of interprocess communication. Finally, performance figures are presented for two parallel applications, linear systems solution, and iterative solution of partial differential equations.

Malony, Allen D.↗