Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “panel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Low Cost Field Emission Flat Panel Displays Final Report CRADA No. TC-0774-94

The ion accelerator at LLNL enabled the fabrication of field emitter cathodes with unique physical attributes not previously avaiIabIe. These properties enabled Candescent to fabricate field emission displays in a low cost, manufacturable manner with cathode performance (efficienq and emission quality) unprecedented in the industry. Candescent and LLNL delivered to ARPA, at the end of the 15 month program, a 3" diagonal black and white display with 80 lines per inch resolution, greater than 20 footlamberts brightness, and at least 16 levels of gray. Additionally, there was a like 3" diagonal color display DOE deliverable. In comparison to liquid crystal displays, the field emission display was brighter, sharper, and consumed 1/3 to 1/2 the power per unit area. The objective of the project was to confirm the efficacy of a new technology (ion tracking) for making efficient, cost effective cathodes for flat panel displays. LLNL was to provide the ion tracking system and experfise and Candescent was to provide the requirements, complete the fabrication of the cathodes, and incorporate them in flat panel displays. The program was quite successful. Candescent is now on the verge of commercializing 5.3 inch diagonal full color flat panel displays using this technology.

42 ENGINEERING↗

Evaluation of Factors that Influence Residential Solar Panel Installations

Though rooftop photovoltaic (PV) systems are the fastest growing source of distributed generation, detailed information about where they are located and who their owners are is often known only to installers and utility companies. This lack of detailed information is a barrier to policy and financial assessment of solar energy generation and use. To bridge the described data gap, Oak Ridge National Laboratory (ORNL) was sponsored by the Department of Energy (DOE) Office of Energy Policy and Systems Analysis (EPSA) to create an automated approach for detecting and characterizing buildings with installed solar panels using high-resolution overhead imagery. Additionally, ORNL was tasked with using machine learning techniques to classify parcels on which solar panels were automatically detected in the Washington, DC, and Boston areas as commercial or residential, and then providing a list of recommended variables and modeling techniques that could be combined with these results to identify attributes that motivate the installation of residential solar panels. This technical report describes the methodology, results, and recommendations in greater detail, including lessons learned and future work.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Report of the Peer Review Panel for the Rainier Mesa/Shoshone Mountain Flow and Transport Model, Nevada National Security Site, Nevada, Revision 0

The stated purpose of the peer review is to determine whether the model, results, interpretations, and documentation are consistent with the requirements of the FFACO Alternative Modeling Strategy and Decision Process for closure of the CAU. The Peer Review Panel was asked to explicitly answer six questions that provide an overview to its conclusions and recommendations. These six questions and the panel’s responses are presented in the next section of this review report. The Peer Review Panel was asked to present and summarize its primary findings by answering six key peer review questions. These questions are as follows: 1.Is the implementation of the AMS technically and regulatorily sound and defensible? 2.Have conceptual models and/or alternatives for groundwater flow and radionuclide transport in the RM/SM system, permissible based upon available data and observations, been identified to support analyses of radionuclide migration away from the testing areas toward potential receptors? 3.Based on available data that include “maximum transport” and “minimum transport,” do the forecasts represent a range of plausible scenarios and address assumptions for parameters that are most sensitive for saturated zone flow and transport? 4.Can radionuclide transport forecasts be used as an aid in evaluating potential exposure pathways, as intended by the AMS? 5.Has the extent of contamination been bounded such that a regulatory decision can be made regarding CAU closure that is protective of human health and the environment? 6.Has anything that influences the protection of human health and the environment been missed?

54 ENVIRONMENTAL SCIENCES↗

UFD Expert Panel on Chloride Induced Stress Corrosion Cracking of Interim Storage Containers for Spent Nuclear Fuel

This report summarizes the outcome of an expert panel review of a key degradation phenomenon identified for atmospherically exposed austenitic stainless steel containers used for the interim dry storage of used nuclear fuel - specifically, chloride induced stress corrosion cracking due to the presence of atmospherically deposited salts. The expert panel consisted of Dr. Peter Andresen (GE Corp Research & Development), Dr. Robert G. Kelly (University of Virginia), Dr. John R. Scully (University of Virginia), and Dr. Alan Turnbull (National Physical Laboratory) and was moderated by Dr. David G. Enos (Sandia National Laboratories). In addition to the above subject matter experts, participants from Sandia National Laboratories, Savannah River National Laboratory, Pacific Northwest National Laboratory, and the Southwest Research Institute will be present. Input from the panel members for a series of preliminary questions dealing with the subject area, along with the meeting minutes, presentation materials, and final recommendations are included here.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Final Review Memo from ATDM L2 Milestone Review Panel to ATDM L2 Milestone Team and Associated Management

On Thursday, August 25, 2016, the ATDM L2 milestone review panel met with the milestone team to conduct a final assessment of the completeness and quality of the work performed. First and foremost, the panel would like to congratulate and commend the milestone team for a job well done. The team completed a significant body of high-quality work toward very ambitious goals. Additionally, their persistence in working through the technical challenges associated with evolving technology, the nontechnical challenges associated with integrating across multiple software development teams, and the many demands on their time speaks volumes about their commitment to delivering the best work possible to advance the ATDM program. The panel’s comments on the individual completion criteria appear in the last section of this memo.

97 MATHEMATICS AND COMPUTING↗

Understanding, Predicting, and Mitigating Catastrophic Shorts for Improved OLED Lighting Panel Reliability (Final Report)

Catastrophic OLED lighting panel failure due to electrical shorting was a significant reliability challenge facing the industry. The goal of this program was to develop a basic scientific understanding of how incipient shorts in an OLED originate and grow to a catastrophic level, and to develop mitigation strategies that enable the industry to reach the DOE target of 0.01% failure rate. We accomplished this goal, identifying the origin of shorts, understanding how the evolve over time, and ultimately identifying a mitigation strategy that was implemented by our industry partner and demonstrated to completely eliminate catastrophic shorts in production OLED panels. We identified two general classes of panel defect, termed bright spots and hot spots, that respectively originate from indium-tin-oxide agglomerations and microscale organic semiconductor dust particles on the substrate. The former are largely benign whereas the latter can lead to local shunts that grow over time and cause catastrophic failure. We understand the growth process as a self-reinforcing cycle, where shunt-induced heating volatilizes the surrounding organic semiconductor, which in turn expands the shunt and leads to even more heating. Based on these results, we identified several practical strategies to arrest the growth of early-stage shorts or prevent them entirely. These results will reduce the cost and improve the reliability of OLED lighting.

36 MATERIALS SCIENCE↗

Performance Assessment of Photovoltaic Panels Using Impedance Spectroscopy

The goal of this project was to develop a technique for measuring internal characteristics of a PV module using light modulation under a fixed voltage bias while measuring the resulting alternating current. This technique, light-intensity modulated impedance spectroscopy (LIMIS), has the promise of detecting early signs of panel aging and degradation that could be used for example by solar farm operators to have early warnings to repair or replace panels to maintain reliability of the overall PV array. LIMIS would be complementary with the previously developed electrochemical impedance spectroscopy (EIS), which uses an alternating voltage applied electrically to a solar cell with a similar alternating current measurement. EIS has mostly been developed for individual PV cells rather than whole modules. The project was intended to assess what different information could be revealed by LIMIS, which may in some cases be more scalable to larger modules and potentially more practical to apply in field measurements without needing to electrically disconnect PV modules. We began with small 10 W PV modules and built a testbed capable of oscillating the light intensity with frequencies up to 50 kHz. In parallel, we built a large testbed for testing large 250 W PV modules. Meanwhile, we developed procedures for established measurement techniques: current–voltage (I–V), EIS, and electroluminescence (EL) imaging, where panels are subjected to forward bias while their infrared emission is recorded using a camera modified to be sensitive to IR wavelengths. In addition, we developed protocols for accelerated aging of PV modules in two ways. Thermal cycling from –40°C to +90°C simulates the diurnal temperature cycles on a rooftop. Mechanical stress by dropping a 227 g ball from a height of 1 m simulates damage such as that due to hail impacts.

14 SOLAR ENERGY↗

EXPERT PANEL OVERSIGHT COMMITTEE ASSESSMENT OF FY2008 CORROSION AND STRESS CORROSION CRACKING SIMULANT TESTING PROGRAM

The Expert Panel Oversight Committee (EPOC) has been overseeing the implementation of selected parts of Recommendation III of the final report, Expert Panel workshop for Hanford Site Double-Shell Tank Waste Chemistry Optimization, RPP-RPT-22126. Recommendation III provided four specific requirements necessary for Panel approval of a proposal to revise the chemistry control limits for the Double-Shell Tanks (DSTs). One of the more significant requirements was successful performance of an accelerated stress corrosion cracking (SCC) experimental program. This testing program has evaluated the optimization of the chemistry controls to prevent corrosion in the interstitial liquid and supernatant regions of the DSTs.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

System Response Testing of HEAF Kevex 130kV Microfocus Source and Thales Flashscan Panel I. Step-wedge Measurements

In the Small Sample DR Testing series, a few questions have arisen when comparing modeled results to experimental data. It is necessary to evaluate these questions in order to validate the modeling assumptions and to ensure the validity of the test procedure in the Small Sample DR Testing. Open Questions: (1) The decay time of the scintillator elements is unknown. (2) The thickness of the Beryllium window on the source is unknown. (3) The residual effects of beam angle and scattering within the detector assembly are unknown. (4) The spectral response of the scintillator and digitizing panel are not known. (5) The spectral content of the source is unknown. Item 1 will be addressed in separate tests by measuring the output of the panel at various intervals after the source has stopped illuminating the panel. Item 2 will be determined by finding the manufacturer specifications. Item 3 will be addressed in separate tests. We cannot easily address items 4 and 5 independently. Measuring the spectral responsivity of the detector directly would require the use of a calibrated reference source, which we lack. Similarly, measuring the spectral content of the source requires spectrally and spatially calibrated detectors, which we also lack. However, we can address the combination of items 1 and 2 to deduce the product of source intensity times detector response. By measuring the X-ray transmittance of samples of known thickness, material composition and density (step wedges), we can infer the desired product and so validate and improve computer models of our system.

47 OTHER INSTRUMENTATION↗

Cable-Driven Parallel Robot (CDPR) for Panelized Envelope Retrofits: Feasible Workspace Analysis

Recent decades have seen remarkable progress in the field of robotic-assisted construction. Cable-driven parallel robots (CDPRs) emerge as promising tools for automating construction processes, due to their advantageous features such as scalability, reconfigurability, compact design, and high payload-to-weight ratio. This paper uses a simple static model to determine the feasibility of a CDPR for overclad panel installation in building envelope retrofits. Given that the building facade needs to be a subset of the CDPR’s wrench-feasible workspace, we focus on the sensitivity of the workspace concerning various cable arrangements and CDPR frame sizes (e.g., height and width extensions). Our analysis indicates that no cable arrangement satisfies the requirement of complete facade coverage and avoids cable-to-panel collisions. Thus, frame extension is needed to enhance coverage. However, in densely populated areas where width extension is limited by space constraints, height extension alone is insufficient to guarantee full facade coverage. This paper pioneers the investigation of CDPRs for panelized envelope retrofits, showcasing their advantages and limitations and paving the way for further research and development.

Liu, Yifang↗

Mylar film eliminates silk screening of equipment panels

Equipment panel designs and nomenclature are photographed on clear Mylar film to permit fast and inexpensive panel redesigns and revisions and to eliminate the silk screen process. The film is coated with an adhesive and impressed on the panel. For revisions, the film is easily peeled off and replaced.

Conger, D. R.↗

Lightweight, self-evacuated insulation panels

Multilayer insulation of prefabricated panels is developed for cryogenic storage tanks. System utilizes panels of aluminized Mylar separated by sheets of low conductivity polyurethane foam. Panels are self-evacuated by cryopumping of gaseous carbon dioxide at time of use.

Dengler, R. P.↗

Thermoelastic damping and its effect on flutter of stressed panels situated in a supersonic airflow

The effects of material damping on flutter of stressed rectangular panels are studied within the context of linear thermoelasticity theory. The closed-form expression for the thermoelastic (material) damping coefficient is obtained as a function of frequency, panel temperature and dimensions, and material properties. The solution of the stability boundary value problem is obtained by use of a generalized Galerkin method in the cross stream direction which reduces the governing partial differential equations to a system of ordinary differential equations in the streamwise direction. These equations are then solved exactly. Numerical results are given for the thermoelastic damping coefficients and for the flutter speeds of partially and fully clamped panels subjected to midplane stress.

Shieh, R. C.↗

An evaluation of random analysis methods for the determination of panel damping

An analysis is made of steady-state and non-steady-state methods for the measurement of panel damping. Particular emphasis is placed on the use of random process techniques in conjunction with digital data reduction methods. The steady-state methods considered use the response power spectral density, response autocorrelation, excitation-response crosspower spectral density, or single-sided Fourier transform (SSFT) of the response autocorrelation function. Non-steady-state methods are associated mainly with the use of rapid frequency sweep excitation. Problems associated with the practical application of each method are evaluated with specific reference to the case of a panel exposed to a turbulent airflow, and two methods, the power spectral density and the single-sided Fourier transform methods, are selected as being the most suitable. These two methods are demonstrated experimentally, and it is shown that the power spectral density method is satisfactory under most conditions, provided that appropriate corrections are applied to account for filter bandwidth and background noise errors. Thus, the response power spectral density method is recommended for the measurement of the damping of panels exposed to a moving airflow.

Bhat, W. V.↗

Fabrication of titanium thermal protection system panels by the NOR-Ti-bond process

A method for fabricating titanium thermal protection system panels is described. The method has the potential for producing wide faying surface bonds to minimize temperature gradients and thermal stresses resulting during service at elevated temperatures. Results of nondestructive tests of the panels are presented. Concepts for improving the panel quality and for improved economy in production are discussed.

Wells, R. R.↗

Low-cost fabrication and direct bond installation of flat, single-curvature and compound-curvature ablative heat shield panels

Procedures for low cost fabrication and direct bond installation of flat, single curved, and compound curvature ablative heat shields on a DC-3 aircraft are discussed. The panel sizes and attachment locations are identified. In addition to the bonding of the four contoured panels, two flat panels were bonded to the nearly flat, lower surface of the center wing section. The detailed requirements and objectives of the investigation are described.

Norwood, L. B.↗

Radiation resistance of a rectangular panel.

The radiation resistance corresponding to the natural modes of a finite rectangular panel is theoretically determined from the total energy radiated to the farfield. The panel is assumed to be simply supported in an infinite baffle. Asymptotic solutions for the low-frequency region are derived, and curves covering the entire frequency range for various mode shapes and aspect ratios are obtained through numerical integration. When the ratio of the acoustic wavenumber to the panel wavenumber is a constant much less than unity, the radiation resistance for all modes is a minimum if the intranodal area (the area between adjacent node lines) is square, and increases with the aspect ratio of the intranodal area.

Wallace, C. E.↗