Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Use of Au@Void@TiO 2 yolk-shell nanostructures to probe the influence of oxide crystallinity on catalytic activity for low-temperature oxidations

A series of Au@Void@TiO 2 yolk-shell structures were synthesized and characterized, and their catalytic activity was tested for the oxidation of carbon monoxide. The target of this study was to evaluate the effects of (1) the crystallinity of the TiO 2 shell and (2) the presence of titanate phases. Transmission electron microscopy and X-ray diffraction data show that increasing calcination temperatures, from 850 to 1250 K, leads to the formation of larger titania crystallites. These crystallites are typically in the form of anatase, but some rutile is also made at high temperatures. The general yolk-shell nanostructures retain their basic characteristics upon calcination and upon treatment with HCl (used to remove the titanate phases), but a few structural and chemical changes do take place: (1) the void-space diameter is reduced by approximately 10% when going from T Calc = 850 K to T Calc = 1250 K, a change that is accompanied by a decrease in the surface area (estimated from N 2 adsorption-desorption isotherms); (2) the shell thickness remains unaffected by either calcination or HCl treatment; (3) the pore volume also remains approximately constant with increasing calcination temperature in the catalysts free of titanates but diminishes significantly in the samples with titanate phases; (4) the mesoporosity is minimal in all yolk-shell nanostructures but more noticeable with the pure TiO 2 shells; (5) the titanates have high Na content (measured by X-ray photoelectron spectroscopy), but that Na is fully removed upon treatment with HCl; (6) no Ti 3+ was detectable in any of the samples, but silica, together with C and (minor amounts of) N, was present in all; (7) all Au is in metallic form; (8) two temperature regimes were observed for the catalytic oxidation of CO, as reported for other similar samples in the past, an Arrhenius regime around or above room temperature, and a cryogenic range going to temperatures as low as 120 K; (9) the latter regime is only seen with the samples containing titanate phases; (10) the titanates seem to also aid in the oxidation at higher temperatures; and (11) in general, increasing titania crystallinity leads to a decrease the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Anoxic photogeochemical oxidation of manganese carbonate yields manganese oxide

The oxidation states of manganese minerals in the geological record have been interpreted as proxies for the evolution of molecular oxygen in the Archean eon. In this paper we report that an Archean manganese mineral, rhodochrosite (MnCO 3 ), can be photochemically oxidized by light under anoxic, abiotic conditions. Rhodochrosite has a calculated bandgap of about 5.4 eV, corresponding to light energy centering around 230 nm. Light at that wavelength would have been present on Earth’s surface in the Archean, prior to the formation of stratospheric ozone. We show experimentally that the photooxidation of rhodochrosite in suspension with light centered at 230 nm produced H 2 gas and manganite (γ-MnOOH) with an apparent quantum yield of 1.37 × 10 –3 moles hydrogen per moles incident photons. Our results suggest that manganese oxides could have formed abiotically on the surface in shallow waters and on continents during the Archean eon in the absence of molecular oxygen.

58 GEOSCIENCES↗
DOE OSTI2017

Spin-Orbit Coupling Controlled J = 3 / 2 Electronic Ground State in 5 d 3 Oxides

Spin-orbit entanglement in 5d-based transition metal oxides (TMOs) has been identified as a route to a host of unconventional physical states including quantum spin liquids, Weyl semimetals, and axion insulators. Yet despite intense interest, no clear rules have emerged for the treatment of spin-orbit coupling (SOC) in 5d TMOs outside of idealised LS or jj coupling paradigms. This is exemplified in 5d 3 oxides in which an orbitally-quenched singlet ground state is anticipated, yet SOC is manifest in the observed magnetic properties. Here we solve this long-outstanding puzzle by revealing that the electronic ground state of Os5+ 5d 3 ions is an unquenched J = 3/2 state. Resonant inelastic x-ray scattering (RIXS) in Ca3LiOsO6 and Ba 2 YOsO 6 exposes a SOC-controlled splitting of the t 2g manifold. The results are successfully described using an intermediate-coupling framework in which oxygen hybridisation promotes the breakdown of the orbital singlet. This framework opens the door to realistic treatment of SOC across a range of 5d TMOs beyond the 5d 3 case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Coherent growth of oxide films on a cleaved layered metal oxide substrate

Understanding oxide interface-induced effects requires controlled epitaxial growth of films on well-defined substrate surfaces. While conventional film growth on ex situ prepared substrates has proven to be a successful route, the choices of appropriate substrates with atomically defined surfaces are limited. Here, by depositing La 2/3 Sr 1/3 Mn O 3 on Sr 2 Ru O 4 (001), we present an alternative method of growing oxide thin films on in situ cleaved surfaces of layered-structured substrates. Cleaving Sr 2 Ru O 4 at low temperature in ultrahigh vacuum exposes an atomically flat, solely SrO-terminated surface with up to micrometer-scale terraces. The deposition of La 2/3 Sr 1/3 Mn O 3 spontaneously diminishes the surface Ru O 6 in-plane rotational distortion of the substrate and results in a cubic-like perovskite film structure with (La/Sr)-O layer termination. The interface is atomically sharp without obvious deviation of lattice spacing and chemical valence, except in the first unit cell where Ru-Mn intermixing is observed. Finally, these results demonstrate that film growth on a cleaved substrate can be an alternative route to obtain well-defined interfaces and in addition increase the availability of substrates for future oxide films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Microbial interactions in the anaerobic oxidation of methane: model simulations constrained by process rates and activity patterns: Process modelling of anaerobic methane oxidation

Proposed syntrophic interactions between the archaeal and bacterial cells mediating anaerobic oxidation of methane coupled with sulfate reduction include electron transfer through (1) the exchange of H2 or small organic molecules between methane-oxidizing archaea and sulfate-reducing bacteria, (2) the delivery of disulfide from methane-oxidizing archaea to bacteria for disproportionation and (3) direct interspecies electron transfer. Each of these mechanisms was implemented in a reactive transport model. The simulated activities across different arrangements of archaeal and bacterial cells and aggregate sizes were compared to empirical data for AOM rates and intra-aggregate spatial patterns of cell-specific anabolic activity determined by FISH-nanoSIMS. Additionally, simulation results showed that rates for chemical diffusion by mechanism (1) were limited by the build-up of metabolites, while mechanisms (2) and (3) yielded cell specific rates and archaeal activity distributions that were consistent with observations from single cell resolved FISH-nanoSIMS analyses. The novel integration of both intra-aggregate and environmental data provided powerful constraints on the model results, but the similarities in model outcomes for mechanisms (2) and (3) highlight the need for additional observational data (e.g. genomic or physiological) on electron transfer and metabolic functioning of these globally important methanotrophic consortia.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Insight of BaCe 0.5 Fe 0.5 O 3– δ twin perovskite oxide composite for solid oxide electrochemical cells

One-pot synthesized twin perovskite oxide composite of BaCe 0.5 Fe 0.5 O 3–δ (BCF), comprising cubic and orthorhombic perovskite phases, shows triple-conducting properties for promising solid oxide electrochemical cells. Phase composition evolution of BCF under various conditions was systematically investigated, revealing that the cubic perovskite phase could be fully/partially reduced into the orthorhombic phase under certain conditions. The reduction happened between the two phases at the interface, leading to the microstructure change. As a result, the corresponding apparent conducting properties also changed due to the difference between predominant conduction properties for each phase. Based on the revealed phase composition, microstructure, and electrochemical properties changes, a deep understanding of BCF's application in different conditions (oxidizing atmospheres, reducing/oxidizing gradients, cathodic conditions, and anodic conditions) was achieved. Triple-conducting property (H + /O 2– /e – ), fast open-circuit voltage response (~16–~470 mV) for gradients change, and improved single-cell performance (~31% lower polarization resistance at 600°C) were comprehensively demonstrated. Besides, the performance was analyzed under anodic conditions, which showed that the microstructure and phase change significantly affected the anodic behavior.

08 HYDROGEN↗
DOE OSTI2018

Tracking of oxide formation in laser-produced uranium plasmas

We use a spatially and temporally resolved emission tracking technique based on optical emission spectroscopy to map the evolution of emission features from uranium and its com- pounds in a plasma produced by a nanosecond laser. We observe quenching of the emission from neutral uranium (591.538 nm) and uranium monoxide (593.55 nm) species with increasing oxygen concentration and discuss possible reaction pathways for dissociation or formation of higher uranium oxides U x O y . Here, we further identify spectral features between 320 nm and 380 nm and between 520 nm and 640 nm, which we attribute to U x O y .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Diagnostic Comparison between Lithium-rich Layered Oxides and Classical Layered Oxides

Established combined characterization techniques to study oxygen activities. Confirmed oxygen anion redox reversibly contributing to the overall capacity of Li-rich layered oxides. Identified the structure irreversible transformation and large amount of strain formation induced by oxygen vacancies formation. Applied GSIR modification method to precisely control oxygen activity in Li-rich layered oxides. Identified several possible contributing factors to irreversible capacity loss routinely seen on the first cycle of classical layered oxides: phase transformation in bulk classical diffusion limitations irreversible surface side reactions generation of dislocations or other extended defects loss of electrical connectivity among cathode particles

Meng, Ying Shirley↗
NASA NTRS1974

The effects of dispersed oxides on the oxidation characteristics of superalloys

The high-temperature oxidation behavior of thoriated nickel and chromium superalloys is discussed on the basis of scanning electron micrographs and other experimental data. The beneficial effects of dispersed oxide particles are identified as a lower chromium content needed for the formation of external scale, an increased adhesion of scale, and lower growth rates of chromia as compared with those in alloys without dispersed oxide particles.

Jaffee, R. I.↗
NASA NTRS1975

Bonding of sapphire to sapphire by eutectic mixture of aluminum oxide and zirconium oxide

Bonding of an element comprising sapphire, ruby or blue sapphire to another element of such material with a eutectic mixture of aluminum oxide and zirconium oxide is discussed. The bonding mixture may be applied in the form of a distilled water slurry or by electron beam vapor deposition. In one embodiment the eutectic is formed in situ by applying a layer of zirconium oxide and then heating the assembly to a temperature above the eutectic temperature and below the melting point of the material from which the elements are formed. The formation of a sapphire rubidium maser cell utilizing eutectic bonding is shown.

Deluca, J. J.↗
NASA NTRS1975

High gas velocity oxidation and hot corrosion testing of oxide dispersion-strengthened nickel-base alloys

Several oxide dispersion strengthened (ODS) nickel-base alloys were tested in high velocity gases for cyclic oxidation resistance at temperatures to 1200 C and times to 500 hours and for hot corrosion resistance at 900 C for 200 hours. Nickel-chromium-aluminum ODS alloys were found to have superior resistance to oxidation and hot corrosion when compared to bare and coated nickel-chromium ODS alloys. The best of the alloys tested had compositions of nickel - 15.5 to 16 weight percent chromium with aluminum weight percents between 4.5 and 5.0. All of the nickel-chromium-aluminum ODS materials experienced small weight losses (less than 16 mg/sq cm).

Deadmore, D. L.↗
NASA NTRS1977

Thermochemical analyses of the oxidative vaporization of metals and oxides by oxygen molecules and atoms

Equilibrium thermochemical analyses are employed to describe the vaporization processes of metals and metal oxides upon exposure to molecular and atomic oxygen. Specific analytic results for the chromium-, platinum-, aluminum-, and silicon-oxygen systems are presented. Maximum rates of oxidative vaporization predicted from the thermochemical considerations are compared with experimental results for chromium and platinum. The oxidative vaporization rates of chromium and platinum are considerably enhanced by oxygen atoms.

Kohl, F. J.↗
NASA NTRS1979

Bonding of sapphire to sapphire by eutectic mixture of aluminum oxide and zirconium oxide

An element comprising sapphire, ruby or blue sapphire can be bonded to another element of such material with a eutectic mixture of aluminum oxide and zirconium oxide. The bonding mixture may be applied in the form of a distilled water slurry or by electron beam vapor deposition. In one embodiment the eutectic is formed in situ by applying a layer of zirconium oxide and then heating the assembly to a temperature above the eutectic temperature and below the melting point of the material from which the elements are formed. The formation of a sapphire rubidium maser cell utilizing eutectic bonding is shown.

Deluca, J. J.↗
NASA NTRS1981

Silicon carbide as an oxidation-resistant high-temperature material. 1: Oxidation and heat corrosion behavior

The oxidation and corrosion behavior of SiC (in the form of a SiC powder) and hot-pressed and reaction-bound material were studied. The excellent stability of SiC in an oxidizing atmosphere is due to the development of protective SiO2 coatings. Any changes in these protective layers (e.g., due to impurities, reaction with corrosive media, high porosity of SiC, etc.) lead in most cases to increased rates of oxidation and thus restrict the field of SiC application.

Schlichting, J.↗
NASA NTRS1981

Strength distributions of SiC ceramics after oxidation and oxidation under load

The room-temperature strength distributions of a sintered and a hot-pressed SiC were examined as-machined, after oxidation at 1370 C, and after oxidation under load at 1370 C. The strengths were observed to be dependent on both the duration of oxidation and the magnitude of the applied load. Processes resulting in both strengthening and weakening behavior were observed to occur, at times simultaneously within the same strength distribution. This dynamic situation indicates that the strength-controlling flaw populations are highly transient in nature.

Easler, T. E.↗