SEARCH · Engineering Papers

Results for “modified separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS2000

GLOW: The Goddard Lidar Observatory for Winds

GLOW (Goddard Lidar Observatory for Winds) is a mobile Doppler lidar system which uses direct detection Doppler lidar techniques to measure wind profiles from the surface into the lower stratosphere. The system is contained in a modified van to allow deployment in field operations. The lidar system uses a Nd:YAG laser transmitter to measure winds using either aerosol backscatter at 1064 nm or molecular backscatter at 355 nm. The receiver telescope is a 45 cm Dall-Kirkham which is fiber coupled to separate Doppler receivers, one optimized for the aerosol backscatter wind measurement and another optimized for the molecular backscatter wind measurement. The receivers are implementations of the 'double edge' technique and use high spectral resolution Fabry-Perot etalons to measure the Doppler shift. A 45 cm aperture azimuth-over-elevation scanner is mounted on the roof of the van to allow full sky access and a variety of scanning options. GLOW is intended to be used as a deployable field system for studying atmospheric dynamics and transport and can also serve as a testbed to evaluate candidate technologies developed for use in future spaceborne systems. In addition, it can be used for calibration/validation activities following launch of spaceborne wind lidar systems. A description of the mobile system is presented along with the examples of lidar wind profiles obtained with the system.

Gentry, Bruce M.↗

NASA NTRS2000

GLOW- The Goddard Lidar Observatory for Winds

Gentry, Bruce M.↗

NASA NTRS1984

Dilution Jets in Accelerated Cross Flows

Results of flow visualization experiments and measurements of the temperature field produced by a single jet and a row of dilution jets issued into a reverse flow combustor are presented. The flow in such combustors is typified by transverse and longitudinal acceleration during the passage through its bending section. The flow visualization experiments were designed to examine the separate effects of longitudinal and transverse acceleration on the jet trajectory and spreading rate. A model describing a dense single jet in a lighter accelerating cross flow is developed. The model is based on integral conservation equations, including the pressure terms appropriate to accelerating flows. It uses a modified entrainment correlation obtained from previous experiments of a jet in a cross stream. The flow visualization results are compared with the model calculations in terms of trajectories and spreading rates. Each experiment is typified by a set of three parameters: momentum ratio, density ratio, and the densimetric Froude number. When injection velocities are large or densities are small, the Froude number becomes very large and hence, unimportant. Therefore, the Froude number is generally significant in describing liquid experiments but is unimportant for the gas experiments in the combustor. Agreement between test and calculated results is encouraging but tends to become poorer with increasing momentum ratio. The temperature measurements are presented primarily in the form of consecutive normalized temperature profiles. Some interpolated isothermal contours are also shown. The single jet trajectories are consistently found to be swept towards the inner wall of the bend, whether injection is from the outer or the inner wall. This behavior is explained by a drifting effect which consists of a transverse velocity component across the combustor due to the developing nature of the flow along it. Plots of lateral temperature distributions of the jet indicate that under longitudinal acceleration conditions the thermal spreading of the jet may be completely suppressed. Comparison between combustor experimental results and model calculations shows poor agreement due to the drifting effect which is not taken into consideration in the model calculations. The row of jets experiments are characterized by two additional parameters: spacing ratio and confinement parameter. The results are shown in the form of consecutive normalized temperature profiles. The confinement parameter appears to become increasingly important with decreasing spacing ratio, in particular when its effect is enhanced by the drifting phenomenon and associated pressure field. A tightly spaced row of jets injected from the inner wall, prior to the bend, is surprisingly kept attached to the inner wall in spite of the strong turning. A similar attachment for a jet injected from the outer wall is not observed.

Lipshitz, Abraham↗

DOE OSTI2026

Extreme Nanoconfinement Dramatically Enhances Small Molecule Solubility in Nonpolar Polymers

Elucidating gas solubility in confined polymer systems addresses a fundamental gap in polymer physics and has important implications for gas barrier and separation technologies and polymer upcycling reactions. In this study, we examine the solubility of methanol and n-hexane in polystyrene and low-density polyethylene confined within the interstitial pores of disordered silica nanoparticle packings. Using capillary rise infiltration, these polymers are infiltrated into the nanoparticle packings. Gas solubility in these confined polymers is measured using a quartz crystal microbalance. Remarkably, confinement leads to a 10- to ∼100-fold increase in gas solubility. Systematic experiments reveal that pore size plays a dominant role in increasing solubility. In contrast, the molecular weight of the polymer and the surface wetting characteristics of the nanoparticles, achieved by hydrophobically modifying the nanoparticles, have minimal effects. By systematically varying penetrant polarity, polymer crystallinity, pore size, and nanopore surface chemistry, this study isolates geometric nanoconfinement as the dominant factor governing solubility enhancement in confined polymers. Atomistic simulations revealed that confinement and surface−polymer interactions both contribute to enhanced solubility, with polymer packing playing a significant role in modulating gas uptake. Here, these results suggest that the changes in the molecular arrangements of polymer segments underlie the observed trends. This study highlights the potential of confined polymers in engineering the separation performance of membranes and heterogeneously catalyzed polymer upcycling reactions.

alcohols↗

NASA NTRS2004

Numerical Study of Flow Past a Circular Cylinder Using RANS, Hybrid RANS/LES and PANS Formulations

Two multiscale type turbulence models are implemented in the PAB3D solver. The models are based on modifying the Reynolds Averaged Navier-Stokes (RANS) equations. The first scheme is a hybrid RANS/LES model utilizing the two-equation (k(sub epsilon)) model with a RANS/LES transition function dependent on grid spacing and the computed turbulence length scale. The second scheme is a modified version of the partially averaged Navier-Stokes (PANS) model, where the unresolved kinetic energy parameter (f(sub k)) is allowed to vary as a function of grid spacing and the turbulence length scale. Solutions from these models are compared to RANS results and experimental data for a stationary and rotating cylinder. The parameter f(sub k) varies between zero and one and has the characteristic to be equal to one in the viscous sub layer, and when the RANS turbulent viscosity becomes smaller than the LES viscosity. The formulation, usage methodology, and validation example are presented to demonstrate the enhancement of PAB3D's time-accurate and turbulence modeling capabilities. The models are compared to RANS results and experimental data for turbulent separated flows (TS) and laminar separated flows (LS) around stationary and rotating cylinders. For a stationary cylinder, the TS case is accurately simulated using the general two-equation k(sub epsilon) turbulence model (eddy-viscosity model). PAB3D accurately predicts the drag coefficient (CD), lift coefficient (CL) and the Strouhal number (St). The LS case was a challenge for the RANS computation with an eddy-viscosity turbulence model. The RANS/LES and PANS performed well and showed marked improvements over the RANS solution. The modified PANS model was the most accurate. For the rotating cylinder, the spin ratio varied from zero to one, and the PANS results were in good agreement with published experimental data. RANS/LES and PANS capture both temporal and spatial fluctuations and produce large-scale structures that do not occur in the RANS simulation. The current results show promise for the capability of PANS in simulating unsteady and complex flow phenomena.

Elmiligui, Alaa A.↗

DOE OSTI2022

Structural and thermodynamic evolution of an amorphous SiOC ceramic after swift heavy ion irradiation

Radiation induced structural and energetic changes have been widely studied in crystalline materials, but studied to a much lesser extent in amorphous solids. Using a combination of neutron pair distribution function (PDF) analysis and high temperature oxide melt solution calorimetry, we obtained critical insights into the structural and energetic evolution in a swift heavy ion irradiated amorphous SiOC polymer-derived ceramic. The radiation modified SiOC structure becomes energetically less stable by 24.0±1.6 kJ/mol compared to the unirradiated structure. This destabilization is related to decreased connectivity of the Si-O-C network and destruction of free carbon. In comparison with unirradiated SiOC, the irradiated structure is more likely to become phase separated during subsequent thermal annealing. Here, our study has important implications for evaluating amorphous SiOC ceramic as a possible radiation resistant structure for nuclear applications.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Controlling Deformation in Al/Ti: How Interface Roughness and Orientation Drive Bimetal Mechanics

The microstructural characteristics and morphology of interfaces in metals can be crucial in governing the initiation of plasticity and early deformation mechanisms under extreme conditions. During high-strain-rate deformation, these interfaces significantly affect dislocation nucleation, twinning, and other mechanisms that directly impact material strength and failure. Despite their importance, a substantial knowledge gap remains between the observed macroscopic material behavior and the underlying role of bimetal interfaces in plasticity initiation. Here, to address this gap, large-scale molecular dynamics simulations are performed on Al/Ti bimetal structures to examine the effect of interface characteristics on the onset of plasticity under uniaxial compression. Specifically, this study investigates how interface roughness (flat vs waveform interfaces) modifies the initiation of plastic events in the microstructure. Atomistic simulations indicate that interface roughness (a microscopic behavior) reduces the stress required for dislocation nucleation, thereby reducing the peak stress relative to a flat interface. For the square interface, the step height strongly influences plasticity initiation by setting the separation of locally flat regions. Varying the interface rotation relative to the loading direction (macroscopic behavior) reveals that the peak stress for both flat and waveform interfaces initially decreases and then increases with rotation, accompanied by a shift in dominant mechanisms—from Al twinning (flat) to interface sliding and Ti-dominated phase transformation and twinning at lower angles. The change in the stress-strain slope during initial compression reflects how rotation alters the resolved shear stress and activates different slip systems. Overall, the study provides valuable insights into the role of bimetal interfaces in controlling plasticity initiation and early deformation pathways for Al/Ti under extreme loading conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2025

CpoS-Inc interactions facilitate host cell modulation during Chlamydia trachomatis infection

ABSTRACT Chlamydia trachomatis ( C.t .), the leading bacterial cause of sexually transmitted infections, replicates within a unique intracellular compartment called the inclusion, which is modified by secreted proteins known as inclusion membrane (Inc) proteins. Here, we further characterize CpoS, an Inc protein previously shown to be critical for bacterial replication and inclusion development. We demonstrate that CpoS directly binds multiple coiled-coil region-containing Incs and engages Rab GTPases at a separate site. Notably, CpoS-InaC interactions facilitate the recruitment of select Arf GTPases to the inclusion membrane, while Rab recruitment occurs independently of these interactions. Biochemical and biophysical analyses revealed that Incs self-oligomerize to form higher-ordered structures, with CpoS adopting a tetrameric conformation resembling that of eukaryotic SNARE proteins. We propose that these assemblies serve as scaffolds to orchestrate vesicle docking, tethering, and fusion. Our findings highlight the intricate interplay between bacterial and host factors, revealing how C.t . leverages both Inc-Inc interactions and host protein engagement to manipulate vesicular trafficking and sustain infection.

Tijerina, Xavier [Department of Microbiology and I↗

NASA NTRS2015

DRAGONS-A Micrometeoroid and Orbital Debris Impact Sensor on the ISS

The Debris Resistive/Acoustic Grid Orbital Navy-NASA Sensor (DRAGONS) is intended to be a large area impact sensor for in situ measurements of micrometeoroids and orbital debris (MMOD) in the sub-millimeter to millimeter size regime in the near Earth space environment. These MMOD particles are too small to be detected by ground-based radars and optical telescopes, but still large enough to be a serious threat to human space activities and robotic missions in the low Earth orbit (LEO) region. The nominal detection area of DRAGONS is 1 sq m, consisting of four 0.5 m × 0.5 m independent panels, but the dimensions of the panels can easily be modified to accommodate different payload constraints. The approach of the DRAGONS design is to combine three particle impact detection concepts to maximize information that can be extracted from each detected impact. The first is a resistive grid consisting of 75-micrometer-wide resistive lines, coated in parallel and separated by 75 micrometer gaps on a 25-micrometer thin film. When a particle a few hundred micrometers or larger strikes the grid, it would penetrate the film and sever some resistive lines. The size of the damage area can be estimated from the increased resistance. The second concept is based on polyvinylidene fluoride (PVDF) acoustic impact sensors. Multiple PVDF sensors are attached to the thin film to provide the impact timing information. From the different signal arrival times at different acoustic sensors, the impact location can be calculated via triangulation algorithms. The third concept employs a dual-layer film system where a second 25-micrometer film is placed 15 cm behind the resistive-grid film. Multiple PVDF acoustic sensors are also attached to the second film. The combination of impact timing and location information from the two films allows for direct measurements of the impact direction and speed. The DRAGONS technology development has been funded by several NASA organizations since 2002, first by the NASA Science Mission Directorate and the NASA Exploration Systems Mission Directorate, then by the NASA JSC Innovative Research and Development Program and the NASA Orbital Debris Program Office. The NASA Orbital Debris Program Office leads the effort with collaboration from the U.S. Naval Academy, Naval Research Laboratory, University of Kent at Canterbury in Great Britain, and Virginia Tech. The project recently reached a major milestone when DRAGONS was approved for a technology demonstration mission by the International Space Station (ISS) Program in October 2014. The plan is to deploy a 1 sq m DRAGONS on the ISS with the detection surface facing the ram-direction for 2 to 3 years. The tentative launch schedule is in early 2017. This mission will collect data on orbital debris in the sub-millimeter size regime to better define the small orbital debris environment at the ISS altitude. The mission will also advance the DRAGONS Technology Readiness Level to 9 and greatly enhance the opportunities to deploy DRAGONS on other spacecraft to high LEO orbits in the future.

Liou, J.-C.↗

DOE OSTI2023

Revolutionizing Porous Liquids: Stabilization and Structural Engineering Achieved by a Surface Deposition Strategy

Facile approaches capable of constructing stable and structurally diverse porous liquids (PLs) that can deliver high-performance applications are a long-standing, captivating, and challenging research area that requires significant attention. Here, in this work, a facile surface deposition strategy is demonstrated to afford diverse type III-PLs possessing ultra-stable dispersion, external structure modification, and enhanced performance in gas storage and transformation by leveraging the expeditious and uniform precipitation of selected metal salts. The Ag(I) species-modified zeolite nanosheets are deployed as the porous host to construct type III-PLs with ionic liquids (ILs) containing bromide anion , leading to stable dispersion driven by the formation of AgBr nanoparticles. The as-afforded type-III PLs display promising performance in CO 2 capture/conversion and ethylene/ethane separation. Property and performance of the as-produced PLs can be tuned by the cation structure of the ILs, which can be harnessed to achieve polarity reversal of the porous host via ionic exchange. The surface deposition procedure can be further extended to produce PLs from Ba(II)-functionalized zeolite and ILs containing [SO 4 ] 2– anion driven by the formation of BaSO 4 salts. The as-produced PLs are featured by well-maintained crystallinity of the porous host, good fluidity and stability, enhanced gas uptake capacity, and attractive performance in small gas molecule utilization.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The crystal chemistry of ZrSi

Reported here is a revised crystal structure of β–ZrSi (TlI/CrB structure type), correcting the atomic position and bond distances. The Si–Si bond length has been modified substantially from 2.723(6) Å to 2.4411(8) Å. The β-ZrSi single crystals were grown from an arc-melted button, and were characterized using single crystal X-ray diffraction. A survey of the TlI/CrB structure type shows that changes to the nomenclature would be useful, separating it into four chemically distinct subtypes: TlI, CrB, CaSi, and ThCo. β–ZrSi is an example of the CaSi subtype. α-ZrSi crystallizes in the related FeB structure type, which is also divided here into the subtypes FeB, CeSi, and YNi. The effect of electron count on the relative phase stabilities of the CaSi and CeSi subtypes is rationalized with the aid of the Zintl concept and electronic structure calculations in the Linear Muffin-Tin Orbital (LMTO) basis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

ELM–Wet: Inclusion of a Wet–Landunit With Sub–Grid Representation of Eco–Hydrological Patches and Hydrological Forcing Improves Methane Emission Estimations in the E3SM Land Model (ELM)

Wetlands are the largest emitters of biogenic methane (CH 4 ) and represent the highest source of uncertainty in global CH 4 budgets. Here, we aim to improve the realism of wetland representation in the U.S. Department of Energy's Exascale Earth System Model land surface model, ELM, thereby reducing uncertainty of CH 4 flux predictions. We develop an updated version, ELM-Wet, where we activate a separate landunit for wetlands that handles multiple wetland-specific eco-hydrological patch functional types. We introduce more realistic hydrological forcing through prescribing site-level constraints on surface water elevation, which allows resolving different sustained inundation depth for different patches, and if data exists, prescribing inundation depth. We modified the calculation of aerenchyma transport diffusivity based on observed conductance per leaf area for different vegetation types. We use Bayesian Optimization to parameterize CO 2 and CH 4 fluxes in the developed wet-landunit. Site-level simulations of a coastal non-tidal freshwater wetland in Louisiana were performed with the updated model. Eddy covariance observations of CO 2 and CH 4 fluxes from 2012 to 2013 were used to train the model and data from 2021 were used for validation. Patch-specific chamber flux observations and observations of CH 4 concentration profiles in the soil porewater from 2021 were used for evaluation of the model performance. Our results show that ELM-Wet reduces the model's CH 4 emission root mean squared error by up to 33% and is able to represent inter-daily CO 2 and CH 4 flux variability across the wetland's eco-hydrological patches, including during periods of extreme dry or wet conditions.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1978

Dynamic stall of an oscillating airfoil

Unsteady separated boundary layers and wakes were studied by investigating flow past an oscillating airfoil which in part models the retreating blade stall on the helicopters. The Navier-Stokes equations in terms of the vorticity and stream function for laminar flow were solved to determine the flow field around a modified NACA 0012 airfoil. After a fully developed flow was determined at zero incidence, the airfoil was oscillated in pitch through an angle of attack range from 0 deg to 20 deg. The computed streamlines during this pitch-up motion are in qualitative agreement with the trajectories of air bubbles observed in water tunnel experiments conducted with a NACA 0012 airfoil under the same conditions. During the pitch-down motion of the airfoil, the computed flow patterns cannot be compared with the experiments because the trajectories of air bubbles intersect.

Mehta, U. B.↗

NASA NTRS1986

Nuclear winter - Three-dimensional simulations including interactive transport, scavenging, and solar heating of smoke

A reexamination is conducted of the 'nuclear winter' hypothesis with a three-dimensional global model modified to allow for localized injection of smoke, its transport by the simulated winds, its absorption of sunlight, and its removal by model-simulated precipitation. Smoke injected into the troposphere is driven upward by solar heating. The tropopause, initially above the smoke, reforms below the heat smoke layer and separates it from precipitation below. Although much smoke is scavenged while the thermal structure is being altered, the residence time of the remaining smoke is greatly increased. Particularly for July conditions, a longer-lasting 'nuclear winter' effect is observed than was found in earlier modeling studies in which normal tropospheric residence times were assumed. In January the smaller solar flux in the northern hemisphere allows faster removal of smoke than in July. Significant cooling of the northern hemisphere continents is predicted; its dependence on season and injected smoke mass is described.

Malone, R. C.↗

NASA NTRS1987

Control of turbulence through a row of Helmholtz resonators

The manipulation of turbulent boundary layers is useful in a variety of situations including drag reduction and separation delay. In this study a passive method of altering the turbulence in a boundary layer is investigated. Ten Helmholtz resonators were imbedded in a spanwise row under a turbulent boundary layer. At certain airspeeds the resonators were strongly excited by the turbulence. In turn, the resonator motions interact to modify the turbulence and mean velocity profiles in the boundary layer. Tests were conducted to measure the response of the resonators as a function of freestream speed. Additional tests, conducted at the conditions for maximum response, documented the affect on the mean and turbulent velocity profiles.

Panton, Ronald L.↗

NASA NTRS2008

Development of an Inline Urine Monitoring System for the International Space Station

Human exposure to microgravity during spaceflight causes bone loss. Calcium and other metabolic byproducts are excreted in urine voids. Frequent and accurate measurement of urine void volume and constituents is essential to determining crew bone loss and the effectiveness of countermeasures. Previous US Space Shuttle (SS) Urine Monitoring System (UMS) technology was unable to accurately measure urine void volumes due to cross contamination between users and fluid system instabilities. Currently, urine voids must be collected manually in a flexible plastic bag containing a known tracer quantity. The crew member must completely mix the bag then withdraw a representative syringe sample for later ground analysis. The current bag system accuracy is highly dependent on mixing technique. The International Space Station (ISS) UMS has been developed as an automated device that collects urine from the Waste and Hygiene Compartment (WHC) urinal funnel interface, separates the urine, measures the void volume, and allows for syringe sampling. After operations, the ISS UMS delivers the urine to the WHC for normal processing then flushes its plumbing with a small water volume. The current ISS UMS design incorporates an innovative rotary separator that minimizes foaming, greatly reduces cross contamination between urine voids (< 0.5 ml urine), and provides accurate volume measurements (< +/- 2% error for 100 to 1000 ml void volumes). The system performance has been validated with extensive ground tests and reduced gravity aircraft flights. The lockersized ISS UMS is currently being modified to interface with the ISS Node 3 WHC Russian ACY hardware. The operation principles, characteristics, and results are outlined in the paper.

Broyan, James Lee, Jr.↗

DOE OSTI2026

A buoyancy–shear–drag–scalar-based turbulence model for power-law acceleration-driven Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing

A previously developed phenomenological turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing based on a general buoyancy–shear–drag model [O. Schilling, “A buoyancy–shear–drag-based turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing,” Physica D 402, 132238 (2020)] is extended to include active or passive scalar mixing and power-law acceleration-driven Rayleigh–Taylor mixing. The buoyancy–shear–drag equations are coupled to a scalar variance equation that is used to define the molecular mixing parameter θ m , and when the scalar is active, modifies the Rayleigh–Taylor and Kelvin–Helmholtz mixing layer growth parameters to depend on the asymptotic value of this parameter, θ mol . Here, the scalar variance equation is closed by algebraically or differentially modeling the scalar variance dissipation rate. Nonlinear analytical solutions of the model are obtained in the total and separate bubble and spike mixing layer width formulations with the algebraic scalar variance dissipation rate for each instability, which are then used to calibrate the mechanical and scalar equation coefficients to predict specific values of physical observables and molecular mixing parameters. Surrogate mechanical and scalar turbulent fields can be constructed by multiplying a presumed self-similar spatial profile by appropriate functions of the width and its time derivative, and of the scalar obtained by solving the ordinary differential model equations. The explicit modeling and solution of turbulent transport equations are not required. The bubble and spike mixing layer width and scalar variance equations are then solved numerically for constant-acceleration Rayleigh–Taylor, impulsively reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing, confirming that the prescribed level of molecular mixing is correctly predicted and illustrating the spatiotemporal evolution of the scalar fields.

Buoyancy–drag↗

NASA NTRS1991

Three-Dimensional Navier-Stokes Simulation of Space Shuttle Main Propulsion 17-inch Disconnect Valves

A steady incompressible three-dimensional viscous flow analysis has been conducted for the Space Shuttle external tank/orbiter propellant feed line disconnect flapper valves with upstream elbows. The Navier-Stokes code, INS3D, is modified to handle interior obstacles and a simple turbulence model. The flow solver is tested for stability and convergence in the presence of interior flappers. An under-relaxation scheme has been incorporated to improve the solution stability. Important flow characteristics such as secondary flows, recirculation, vortex and wake regions, and separated flows are observed. Computed values for forces, moments, and pressure drop are in satisfactory agreement with water flow test data covering a maximum tube Reynolds number of 3.5 million. The predicted hydrodynamical stability of the flappers correlates well with the measurements.

Kandula, M.↗