Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “misalignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Study of rolling element dynamic interactions with separator and raceway paths. Roller skewing measurements in roller bearings

Measurements of roller skewing in a 118 mm bore roller bearing operating at shaft speeds to 12000 rpm are reported. High speed motion pictures of a modified roller were taken through a derotation prism to record skewing as the roller moved through loaded and unloaded regions of the bearing. Subsequent frame by frame measurement of the photographic film provided information on roller skewing. Radial and tangential skew amplitudes of .4 to .5 degrees were observed with .5 degree misalignment.

Nypan, L. J.↗
NASA NTRS1980

Incorporation of star measurements for the determination of orbit and attitude parameters of a geosynchronous satellite: An iterative application of linear regression

Currently on NOAA/NESS's VIRGS system at the World Weather Building star images are being ingested on a daily basis. The image coordinates of the star locations are measured and stored. Subsequently, the information is used to determine the attitude, the misalignment angles between the spin axis and the principal axis of the satellite, and the precession rate and direction. This is done for both the 'East' and 'West' operational geosynchronous satellites. This orientation information is then combined with image measurements of earth based landmarks to determine the orbit of each satellite. The method for determining the orbit is simple. For each landmark measurement one determines a nominal position vector for the satellite by extending a ray from the landmark's position towards the satellite and intersecting the ray with a sphere with center coinciding with the Earth's center and with radius equal to the nominal height for a geosynchronous satellite. The apparent motion of the satellite around the Earth's center is then approximated with a Keplerian model. In turn the variations of the satellite's height, as a function of time found by using this model, are used to redetermine the successive satellite positions by again using the Earth based landmark measurements and intersecting rays from these landmarks with the newly determined spheres. This process is performed iteratively until convergence is achieved. Only three iterations are required.

Phillips, D.↗
NASA NTRS1979

Performance of end-face seals with diametral tilt and coning - Hydrodynamic effects

Hydrodynamic effects in end-face seals with diametral tilt and coning are analyzed. A closed-form solution for the axial separating force and the restoring and transverse moments is presented that covers the whole range from zero to full angular misalignment at various degrees of coning. Both low-pressure seals with cavitating flow and high-pressure seals with full fluid film are considered. The effect of coning is to reduce the axial force and the restoring and transverse moments compared to their magnitude in flat-face seals. Strong coupling between diametral tilt and transverse moment is demonstrated. This transverse moment which is entirely due to hydrodynamic effects can be the source of dynamic instability in the form of seal wobble.

Sharoni, A.↗
NASA NTRS1979

Paraboloidal X-ray telescope mirror for solar coronal spectroscopy

The telescope mirror for the X-ray Spectrograph Spectrometer Telescope System is a sixty degree sector of an extreme off-axis paraboloid of revolution. It was designed to focus a coronal region 1 by 10 arc seconds in size on the entrance slit of the spectrometer after reflection from the gold surface. This paper discusses the design, manufacture, and metrology of the mirror, the methods of precision mechanical metrology used to focus the system, and the mounting system which locates the mirror and has proven itself through vibration tests. In addition, the results of reflection efficiency measurements, alignment tolerances, and ray trace analysis of the effects of misalignment are considered.

Brown, W. A.↗
NASA NTRS1980

Utilizing LANDSAT imagery to monitor land-use change - A case study in Ohio

A study, performed in Ohio, of the nature and extent of interpretation errors in the application of Landsat imagery to land-use planning and modeling is reported. Potential errors associated with the misalignment of pixels after geometric correction and with misclassification of land cover or land use due to spectral similarities were identified on interpreted computer-compatible tapes of a portion of Franklin County for two adjacent days of 1975 and one day of 1973, and the extents of these errors were quantified by comparison with a ground-checked set of aerial-photograph interpretations. The open-space and agricultural categories are found to be the most consistently classified, while the more urban areas were classified correctly only from about 43 to 8% of the time. It is thus recommended that the direct application of Landsat data to land-use planning must await improvements in classification techniques and accuracy.

Gordon, S. I.↗
NASA NTRS1980

Solution of Euler's Equations of Motion and Eulerian Angles for near symmetric rigid bodies subject to constant moments

Analytic expressions are found for Euler's Equations of Motion and for the Eulerian Angles for both symmetric and near symmetric rigid bodies under the influence of arbitrary constant body-fixed torques. These solutions provide the body-fixed angular velocities and the attitude of the body, respectively, as functions of time. They are of special interest in applications to spinning spacecraft (such as the Galileo Spacecraft to be launched in 1984) because they include the effect of time-varying spin rate. Thus they can be applied to spin-up and spin-down maneuvers as well as to error analysis for thruster misalignments. The solutions are given for arbitrary initial conditions in terms of Fresnel, Sine and Cosine Integrals. Numerical integration of the governing differential equations has verified that the approximate analytic solutions are very accurate in many physical situations of interest.

Longuski, J. M.↗
NASA NTRS1981

Roller skewing measurements in cylindrical roller bearings

Measurements of roller skewing in a 118 mm bore roller bearing operating at shaft speeds to 12,000 rpm are reported. High speed motion pictures of a modified roller were taken through a derotation prism to record skewing as the roller moved through loaded and unloaded regions of the bearing. Subsequent frame by frame measurement of the photographic film provided information on roller skewing. Radial and tangential skew amplitudes of 0.4 to 0.5 degrees were observed with 0.5 degree misalignment.

Nypan, L. J.↗
NASA NTRS1980

An active alignment scheme for the MPTS array

In order to achieve and maintain required flatness of the antenna array, a rotating laser beam used for leveling applications on earth was utilized as a reference system. A photoconductive sensor with a reflective collecting surface determines the displacement and polarity of any misalignment and automatically engages a stepping motor to drive a variable-length mechanism to make the necessary corrections. Once aligned, little power is dissipated since a nulling bridge circuit that centers on the beam is used. A three-point subarray alignment arrangement is described which independently adjusts, in the three orthogonal directions, the height and tilt of subarrays within the MPTS array and readily adapts to any physical distortions of the secondary structure (such as that resulting from severe temperature extremes caused by an eclipse of the Sun). It is shown that only one rotating laser system is required since optical blockage is minimal on the array surface and that it is possible to incorporate a number of redundant laser systems for reliability without affecting the overall performance.

Iwasaki, R.↗
NASA NTRS1981

Design and analysis of a torsion braid pendulum displacement transducer

The dynamic properties at various temperatures of braids impregnated with polymer can be measured by using the braid as the suspension of a torsion pendulum. This report describes the electronic and mechanical design of a torsional braid pendulum displacement transducer which is an advance in the state of the art. The transducer uses a unique optical design consisting of refracting quartz windows used in conjunction with a differential photocell to produce a null signal. The release mechanism for initiating free torsional oscillation of the pendulum has also been improved. Analysis of the precision and accuracy of the transducer indicated that the maximum relative error in measuring torsional amplitude was approximately 0. A serious problem inherent in all instruments which use a torsional suspension was analyzed: misalignment of the physical and torsional axes of the torsional member which results in modulation of the amplitude of the free oscillation.

Rind, E.↗
NASA NTRS1981

Effects on biological systems of reflected light from a satellite power system

Light reflection produced by the satellite power system and the possible effects of that light on the human eye, plants, and animals were studied. For the human eye, two cases of reflected light, might cause eye damage if viewed for too long. These cases are: (1) if, while in low Earth orbit, the orbital transfer vehicle is misaligned to reflect the Sun to Earth there exists a maximum safe fixation time for the naked eye of 42.4 secs; (2) reflection from the aluminum paint on the back of the orbital transfer vehicle, while in or near low Earth orbit, can be safely viewed by the naked eye for 129 sec. For plants and animals the intensity and timing of light are not a major problem. Ways for reducing and/or eliminating the irradiances are proposed.

White, M.↗
NASA NTRS1981

Interferometer

A high resolution interferometer is described. The interferometer is insensitive to slight misalignment of its elements, avoids channeling in the spectrum, generates a maximum equal path fringe contrast, produces an even two sided interferogram without critical matching of the wedge angles of the beamsplitter and compensator wedges, and is optically phase tunable. The interferometer includes a mirror along the path of each beam component produced by the beamsplitter, for reflecting the beam component from the beamsplitter, for reflecting the beam component from the beamsplitter to a corresponding retroreflector and for reflecting the beam returned by the retroreflector back to the beamsplitter. A wedge located along each beam component path, is large enough to cover the retroreflector, so that each beam component passes through the wedge during movement towards the retroreflector and away therefrom.

Breckinridge, J. B.↗
NASA NTRS1981

A 5 x 40 cm rectangular-beam multipole ion source

A rectangular ion source particularly suited for the continuous sputter processing of materials over a wide area is discussed. A multipole magnetic field configuration was used to design an ion source with a 5 x 40 cm beam area, while a three-grid ion optics system was used to maximize ion current density at the design ion energy of 500 eV. An average extracted current density of about 4 mA/sq cm could be obtained from 500 eV Ar ions. The difference between the experimental performance and the design value of 6 mA/sq cm is attributed to grid misalignment due to thermal expansion. The discharge losses at typical operating conditions ranged from about 600 to 1000 eV/ion, in reasonable agreement with the design value of 800 eV/ion. The use of multiple rectangular-beam ion sources to process wider areas than would be possible with a single source was also studied, and the most uniform coverage was found to be obtainable with a 0 to 2 cm overlap.

Robinson, R. S.↗
NASA NTRS1981

The dissipation of inhomogeneous magnetic fields and the problem of coronae. I - Dislocation and flattening of flux tubes. II - The dynamics of dislocated flux

Attention is given to the dynamical dissipation arising in a magnetic field extending up through a tenuous atmosphere when an elemental flux tube in the field (1) is displaced from its equilibrium position and/or (2) is inflated by an internal fluid pressure different from the external fluid pressure. It is pointed out that as a consequence the tension in the lines of force of the ambient field flattens the dislocated tube so that the thickness of the tube decreases without limit and that the local field gradients increase rapidly with the passage of time until destroyed by one or more dissipative effects. The magnetic energy of a dislocated flux tube is therefore soon converted into thermal energy no matter how low the molecule resistivity of the fluid. Some formal illustrations of local conditions along a misaligned flux tube are presented, showing the simultaneous onset of diffusion, fluid motion, and hydromagnetic wave propagation. The examples demonstrate that the total effect is complicated and subject only to estimation, rather than formal calculation, at the present time.

Parker, E. N.↗
NASA NTRS1980

Alignment and evaluation of the cryogenic corrected infrared astronomical satellite /IRAS/ telescope

Room temperature alignment and evaluation techniques for the Infrared Astronomical Satellite (IRAS) telescope, which has a primary mirror figured to correct for surface distortions and the 2 K operating temperature are discussed. Interferometric cryogenic testing of the 0.6 m, f/1.5 lightweighted beryllium primary mirror at its intended operating temperature reveals surface distortions that can be modeled with Zernike polynomials. With this model, it becomes possible to derive the 'inverse' of the cryowavefront error (ideal cryo mirror) and to figure the cryo correction into the primary mirror using Perkin-Elmer's Computer Controlled Polisher. It is recognized that during room temperature assembly of the system, misalignment of the secondary mirror can introduce additional unwanted aberrations that may cancel or distort the wavefront errors purposely introduced by the cryo figuring. To avoid this possible degradation and to ensure optimum telescope performance, the system Zernike polynomial coefficients and wavefront maps generated from the in-process alignment interferograms are monitored and compared to Zernike coefficients and wavefront maps for the cryo corrected primary mirror.

Harned, N.↗
NASA NTRS1980

Models for galactic X-ray sources

Attention is given to those compact galactic X-ray sources whose X-ray luminosities are considerably in excess of the solar luminosity. It is pointed out that the key breakthrough in the development of an understanding of compact galactic X-ray sources was the discovery of X-ray pulsars with the UHURU satellite. There is now overwhelming evidence that these objects are neutron stars in close binary stellar systems. The X-ray pulsations are thought to be thermal emission from the magnetic polar caps of a neutron star that is accreting matter from a companion star and whose magnetic field is misaligned with its rotation axis. Among the compact galactic X-ray sources that are not X-ray pulsars, some still show direct evidence of binary membership, such as X-ray eclipses. There is evidence that the galactic-bulge sources are, in fact, close binary stellar systems. It is concluded, that the great majority of bright galactic X-ray sources, with only a tiny handful of exceptions (such as the Crab and Vela pulsars), are likely to be binaries.

Joss, P. C.↗
NASA NTRS1981

Inertial attitude determination for a dual-spin planetary spacecraft

Design and performance evaluations of an onboard inertial attitude determination system for a dual-spin planetary spacecraft are presented. A quaternion integration algorithm and a rate estimator sequentially determine the scan platform's inertial attitude and rate from the drift and misalignment compensated gyro outputs. A least-squares estimator algorithm processes the star transit data from a rotor-mounted star scanner, and provides periodic updates of the scan platform's attitude as a means of correcting the drift of the quaternion integration algorithm. Computer simulated algorithm performance in the presence of nutation and sensor noise are presented.

Wong, E. C.↗
NASA NTRS1981

Solar rotation measurements at Mount Wilson. II - Systematic instrumental effects and the absolute rotation rate

Possible sources of systematic error in solar Doppler rotational velocities are examined. Scattered light is shown to affect the Mount Wilson solar rotation results, but this effect is not enough to bring the spectroscopic results in coincidence with the sunspot rotation. Interference fringes at the spectrograph focus at Mount Wilson have in two intervals affected the rotation results. It has been possible to correlate this error with temperature and thus correct for it. A misalignment between the entrance and exit slits is a possible source of error, but for the Mount Wilson slit configuration, the amplitude of this effect is negligibly small. Rapid scanning of the solar image also produces no measurable effect.

Labonte, B. J.↗
NASA NTRS1981

Galileo maneuver analysis

In the maneuver analysis of the Galileo spacecraft, analytic models have been developed to assess the performance of an interplanetary dual spin spacecraft. These models take into account all the important effects of dual spin and flexible body dynamics to determine the spacecraft capability to achieve precise velocity changes for a variety of maneuver modes, as dictated by the requirements and as are tested and verified by computer simulation. Proportional velocity change magnitude accuracies as small as 0.34%, proportional velocity change pointing accuracies as little as 10 milliradians and fixed velocity change accuracies as precise as 0.015 m/sec are indicative of the stringency of these requirements. Error sources considered in the statistical analysis include probabilistic uncertainties due to wobble, plume impingement, nutation, thruster and accelerometer misalignments and radial offsets, gyro drift, burn timing, mass properties and algorithm errors. With its twelve thrusters, the versatility of the spacecraft to maneuver among the Galilean moons for eleven encounters after delivering a probe into the Jovian atmosphere provides a new level of challenge in the area of maneuver analysis.

Longuski, J. M.↗