Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Straining of SiGe ultrathin films with mesoporous Si substrates

We report on the fabrication and characterization of ultrathin (down to 50 nm) tensile strained SiGe films on mesoporous Si substrates. Low temperature oxidation of the porous substrate relaxes the compressive strain in the as grown monocrystalline (mc) SiGe. Applying this method to a 50 nm thick mc-Si{sub 0.72}Ge{sub 0.28} film, a tensile strain >0.78% can be achieved without compromising crystalline quality and up to 1.45 % without the appearance of cracks.

36 MATERIALS SCIENCE↗

Immobilization of Thiadiazole Derivatives on Magnetite Mesoporous Silica Shell Nanoparticles in Application to Heavy Metal Removal from Biological Samples

In this report magnetite was synthesized by a coprecipitation method, then coated with a layer of silica. Another layer of mesoporous silica was added by a sol-gel method, then 5-amino-1,3,4-thiadiazole-thiol (ATT) was immobilized onto the synthesized nanoparticles with a simple procedure. This was followed by a series of characterizations, including transmission electron microscopy (TEM), FT-IR spectrum, elemental analysis and XRD. Heavy metal uptake of the modified nanoparticles was examined by atomic absorption spectroscopy. For further investigation we chose Cu{sup 2+} as the preferred heavy metal to evaluate the amount of adsorption, as well as the kinetics and mechanism of adsorption. Finally, the capacity of our nanoparticles for the heavy metal removal from blood was shown. We found that the kinetic rate of Cu{sup 2+} adsorption was 0.05 g/mg/min, and the best binding model was the Freundlich isotherm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of mesoporous NiO doped TiO{sub 2} submicrosphere via spray hydrolysis

NiO doped TiO{sub 2} submicrosphere have been prepared via spray hydrolysis. The doping concentration has been varied form 2 wt% to 15 wt%. Morphology of the submicrospheres has been investigated using small-angle neutron scattering and scanning electron microscopy. Elemental analysis has been carried out by energy dispersive X-ray analysis which confirms the doping concentrations. The mesopores in submicrospheres possess cylindrical morphology.

36 MATERIALS SCIENCE↗

Observations on size confinement effect in B-C-N nanoparticles embedded in mesoporous silica channels

Fluorescent B-C-N/silica nanoparticles were synthesized by solution impregnation method. Effect of B-C-N particle size on the optical properties was investigated by varying the silica pore sizes. Formation of B-C-N nanoparticles within the mesoporous matrix is confirmed by x-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. Furthermore, a remarkable blue-shift in emission peak centres with decreasing pore size in conjugation with band gap modification, ascribed to the size confinement effect. A detailed analysis of experimental results by theoretically defined confinement models demonstrates that the B-C-N nanoparticles in the size range of 3–13 nm falls within the confinement regime. This work demonstrated the experimental evidence of the size confinement effect in smaller size B-C-N nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling morphology, mesoporosity, crystallinity, and photocatalytic activity of ordered mesoporous TiO{sub 2} films prepared at low temperature

Partly ordered mesoporous titania films with anatase crystallites incorporated into the pore walls were prepared at low temperature by spin-coating a microemulsion-based reaction solution. The effect of relative humidity employed during aging of the prepared films was studied using SEM, TEM, and grazing incidence small angle X-ray scattering to evaluate the mesoscopic order, porosity, and crystallinity of the films. The study shows unambiguously that crystal growth occurs mainly during storage of the films and proceeds at room temperature largely depending on relative humidity. Porosity, pore size, mesoscopic order, crystallinity, and photocatalytic activity of the films increased with relative humidity up to an optimum around 75%.

36 MATERIALS SCIENCE↗

Fluorescence properties of dye doped mesoporous silica

In this paper we present a review of the main results we obtained studying the emission properties of organic-inorganic hybrids obtained combining mesoporous silica and Xantene dyes, in particular the standard reference Rhodamine 6G. The purpose of the review is to show the possibility to efficiently 'dope' the transparent inorganic porous matrix to obtain promising systems for photonic and biomedical applications. The strategies to solve the concentration effect and the leaching phenomenon are discussed within the framework of the single exciton theory.

36 MATERIALS SCIENCE↗

Combined Au-plasmonic nanoparticles with mesoporous carbon material (CMK-3) for photocatalytic water splitting

The conventional TiO{sub 2} photoelectrode for water splitting was integrated with ordered mesoporous carbon material (CMK-3) and Au metal nanoparticles (NPs) to improve the photocatalytic efficiency under visible light irradiation. Compared to TiO{sub 2}, Au/TiO{sub 2}-CMK-3 photoelectrode demonstrated over two orders of magnitude enhancement of photocurrent under 532 nm laser irradiation due to the generation of hot electron and near field from Au NPs. Furthermore, the improvement of free carrier transport and additional long-wavelength absorption can be achieved by exploiting the superior conductivity and blackbody-like property of CMK-3. This proposed enhancement mechanism was proved by the measurements of photoluminescence emission spectrum and electrochemical impedance spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mesoporous tertiary oxides via a novel amphiphilic approach

We report a facile biomimetic sol-gel synthesis using the sponge phase formed by the lipid monoolein as a structure-directing template, resulting in high phase purity, mesoporous dysprosium- and gadolinium titanates. The stability of monoolein in a 1,4-butanediol and water mixture complements the use of a simple sol-gel metal oxide synthesis route. By judicious control of the lipid/solvent concentration, the sponge phase of monoolein can be directly realised in the pyrochlore material, leading to a porous metal oxide network with an average pore diameter of 10 nm.

36 MATERIALS SCIENCE↗

Annealing effect on thermodynamic and physical properties of mesoporous silicon: A simulation and nitrogen sorption study

Discovery of porous silicon formation in silicon substrate in 1956 while electro-polishing crystalline Si in hydrofluoric acid (HF), has triggered large scale investigations of porous silicon formation and their changes in physical and chemical properties with thermal and chemical treatment. A nitrogen sorption study is used to investigate the effect of thermal annealing on electrochemically etched mesoporous silicon (PS). The PS was thermally annealed from 200°C to 800°C for 1 hr in the presence of air. It was shown that the pore diameter and porosity of PS vary with annealing temperature. The experimentally obtained adsorption / desorption isotherms show hysteresis typical for capillary condensation in porous materials. A simulation study based on Saam and Cole model was performed and compared with experimentally observed sorption isotherms to study the physics behind of hysteresis formation. We discuss the shape of the hysteresis loops in the framework of the morphology of the layers. The different behavior of adsorption and desorption of nitrogen in PS with pore diameter was discussed in terms of concave menisci formation inside the pore space, which was shown to related with the induced pressure in varying the pore diameter from 7.2 nm to 3.4 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and morphological properties of mesoporous carbon coated molybdenum oxide films

In the present study, we report the structural and morphological properties of mesoporous carbon coated molybdenum oxide films. The deposition of films was carried out in a two-step process, the first step involves deposition of molybdenum and carbon bilayer thin films using DC magnetron sputtering. In the second step the sample was ex-situ annealed in a muffle furnace at different temperatures (400°C to 600°C) and air cooled in the ambient atmosphere. The formation of the meso-porous carbon clusters on molybdenum oxide during the cooling step was investigated using FESEM and AFM techniques. The structural details were explored using XRD. The meso-porous carbon were found growing over molybdenum oxide layer as a result of segregation phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pore diameter dependence of catalytic activity: p -nitrobenzaldehyde conversion to an aldol product in amine-functionalized mesoporous silica

The reaction yield for conversion of p-nitrobenzaldehyde (PNB) to an aldol product in amine-functionalized mesoporous silica nanoparticles (MSN) exhibits a 20-fold enhancement for a modest increase in pore diameter, d. This enhanced catalytic activity is shown to reflect a strong increase in the “passing propensity,” P, of reactant and product species inside the pores. We find that P ≈ 0, corresponding to single-file diffusion, applies for the smallest d which still significantly exceeds the linear dimensions of PNB and the aldol product. However, in this regime of narrow pores, these elongated species must align with each other and with the pore axis in order to pass. Thus, P reflects both translational and rotational diffusion. Langevin simulation accounting for these features is used to determine P versus d. The results are also augmented by analytic theory for small and large d where simulation is inefficient. The connection with the catalytic activity and yield is achieved by the incorporation of results for P into a multi-scale modeling framework. Specifically, we apply a spatially coarse-grained (CG) stochastic model for the overall catalytic reaction-diffusion process in MSN. Pores are treated as linear arrays of cells from the ends of which species adsorb and desorb, and between which species hop and exchange, with the exchange rate reflecting P. CG model predictions including yield are assessed by Kinetic Monte Carlo simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance of III–V Solar Cells Grown on Reformed Mesoporous Ge Templates

We demonstrate a solar cell on reformed porous Ge with an efficiency of 7.7%. We generate mesopores in (100) Ge by bipolar electrochemical etching and anneal them at high temperature. The pores coalesce deep in the structure rather than at the surface as desired, although resulting in coarse superficial morphology unsuitable for device growth. To combat this issue, we developed a surface treatment involving an HBr dip, annealing at 415 degrees C, and a postannealing ultrasonic De-ionized water dip to improve the surface structure, resulting in a smoother reformed surface on which we grow a GaInAs solar cell. The structure retains embedded pores after growth and the transitions between Ge and III-V layers are distinct. The solar cell fabricated using the improved coalescence has an efficiency of 4.5%. The efficiency improves to 7.7% by isolating the rest of the device from three limiting localized shunt areas. Protruding defects in the porous Ge and III-V layers still limit the performance, but this work establishes a step toward the technical viability of this exfoliation approach, showing decent efficiency if protruding defects can be removed or reduced.

14 SOLAR ENERGY↗

Ultrahigh–current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF 3 framework

Lithium (Li) metal is the ultimate solution for next-generation high–energy density batteries but is plagued from commercialization by infinite relative volume change, low Coulombic efficiency due to side reactions, and safety issues caused by dendrite growth. These hazardous issues are further aggravated under high current densities needed by the increasing demand for fast charging/discharging. We report a one-step fabricated Li/Al 4 Li 9 -LiF nanocomposite (LAFN) through an “overlithiation” process of a mesoporous AlF 3 framework, which can simultaneously mitigate the abovementioned problems. Reaction-produced Al 4 Li 9 -LiF nanoparticles serve as the ideal skeleton for Li metal infusion, helping to achieve a near-zero volume change during stripping/plating and suppressed dendrite growth. As a result, the LAFN electrode is capable of working properly under an ultrahigh current density of 20 mA cm –2 in symmetric cells and manifests highly improved rate capability with increased Coulombic efficiency in full cells. Here, the simple fabrication process and its remarkable electrochemical performances enable LAFN to be a promising anode candidate for next-generation lithium metal batteries.

36 MATERIALS SCIENCE↗

Modification of the structural, textural, and mechanical properties of an Al{sub 2}O{sub 3}/Al composite on the addition of an Al-SBA-15-type mesoporous phase

The formation of the pore structure of metal–ceramic materials based on Al{sub 2}O{sub 3}/Al composites has been studied in detail by modifying them via the incorporation of SBA-15-type mesoporous materials. The composition, pore structure, pore size, and morphology of the composite particles have been studied using nitrogen adsorption/desorption isotherms, scanning electron microscopy, and X-ray diffraction. We have produced Al-SBA-15/Al{sub 2}O{sub 3}/Al monoliths that combine properties of both adsorbents and permeable materials, but the incorporation of Al-SBA-15 into an Al{sub 2}O{sub 3}/Al matrix reduces the permeability and mechanical strength of the composites.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of the nanocomposite materials based on a mesoporous silicon dioxide matrix

The structural and magnetic properties of the mesoporous systems based on silicon dioxide with a regular hexagonal arrangement of pores several microns in length and several nanometers in diameter, which are filled with iron compound nanofilaments in various chemical states, are studied in detail. The studies are performed using the following mutually complementary methods: transmission electron microscopy, SQUID magnetometry, electron spin resonance, Mössbauer spectroscopy, polarized neutron small-angle diffraction, and synchrotron radiation diffraction. It is shown that the iron nanoparticles in pores are mainly in the γ phase of Fe{sub 2}O{sub 3} with a small addition of the α phase and atomic iron clusters. The effective magnetic field acting on a nanofilament from other nanofilaments is 11 mT and has a dipole nature, the ferromagnetic–paramagnetic transition temperature is in the range 76–94 K depending on the annealing temperature of the samples, and the temperature that corresponds to the change in the magnetic state of the iron oxide nanofilaments is T ≈ 50–60 K at H = 0 and T ≈ 80 K at H = 300 mT. It is also shown that the magnetization reversal of an array of nanofilaments is caused by the magnetostatic interaction between nanofilaments at the fields that are lower than the saturation field.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of the processes of degradation of the optical properties of mesoporous and macroporous silicon upon exposure to simulated solar radiation

The effect of solar radiation on the surface composition of mesoporous and macroporous silicon is studied by infrared spectroscopy, Raman spectroscopy, and photoluminescence measurements in order to analyze the possibility of using these materials as a material for solar-power engineering. The studies are conducted in the laboratory environment, with the use of a solar-radiation simulator operating under conditions close to the working conditions of standard silicon solar cells. The studies show that, in general, the materials meet the requirements of solar-power engineering, if it is possible to preclude harmful effects associated with the presence of heat-sensitive and photosensitive bonds at the nanomaterial surface by standard processing methods.

36 MATERIALS SCIENCE↗

Controlled synthesis of mesoporous codoped titania nanoparticles and its photocatalytic activity

The photocatalytic (PC) activity of anatase titania microparticles can be improved through codoping with transition metals and nitrogen. In addition, the PC activity can also be improved by creating monodisperse, mesoporous microparticles of titania. The question naturally arose as to whether combining these two characteristics would result in further improvement in the PC activity or not. Herein, we describe the synthesis and photocatalytic characteristics of codoped, monodisperse anatase titania.

77 NANOSCIENCE AND NANOTECHNOLOGY↗