Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “joint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Report on Developing a US-China Joint Project on CO2-Based Fracturing Techniques

There are several types of hydraulic fracturing methods that have been investigated in the past decades that use little or no water. The criteria for selecting an optimal hydraulic fracturing fluids are many, and no single fluid can meet all the desired characteristics. Developing a set of technologies by using different fracturing fluids can better meet individual geologic, economic, and environmental needs. CO2 as an alternative of water for hydraulic fracturing has its unique place among all other fracturing fluids, and can meet both economic and environmental objectives under certain circumstances. There are three main categories of CO2-based fracturing fluids, simple liquid CO2 (LCO2), directly thickened LCO2, and CO2-foams/emulsions. Although LCO2 has many advantages, critical disadvantages arise due to its high operating pressure, low viscosity, poor proppant-carrying capacity, and generation of shallower fracture networks. To date, techniques for direct thickening of LCO2 to overcome these limitations have proven ineffective. To increase the apparent viscosity of CO2, we propose to further develop CO2-foam (and emulsion) fracturing techniques. While CO2-foams have long been used in EOR, the required properties for hydraulic fracturing are different, and relatively few peer-reviewed publications and field test reports are available regarding their applications in fracturing, and the surfactants and additives used are often proprietary This report describes a brief state-of-the-art analysis of CO2-based hydraulic fracturing methods and then discusses a joint plan for a long-term R&D collaboration to advance the most promising CO2-based hydraulic fracturing techniques as part of the U.S.-China Clean Energy Research Center, Water Energy Technology (CERC-WET). The objective of this U.S.-China joint research project is to design and laboratory test a CO2-foam fracturing fluid system, and then conduct pilot field-tests on them in China’s Jilin Oilfield. This joint research project will benefit both U.S. and China for advancing their shared goal of developing better technologies for CO2-based fracturing. The Chinese CERC-WET has two teams joining the project, one from RIPED, responsible for aboveground infrastructure design and construction. Another team from the Jilin Oilfield will be responsible for the field test design and conducting the test. The U.S.CERC-WET team at LBNL will be responsible for providing the CO2-foam formulations and their rheology parameters to be tested in the field (a challenging task and a key to success); participating in the equipment design and field test design; assisting in analyzing field data; and reporting to U.S. DOE and CERC-WET.

58 GEOSCIENCES↗

Shear Strength Measurements on Adhesive-Bonded High Explosive Joints (Progress Summary)

The testing of block shear joints to determine ultimate shear strength and modulus is described by the ASTM D905 standard. However, ASTM D905 is not directly applicable for High Explosive (HE) joints, as it requires large masses of HE and the mechanical testing fixture may damage the HE. We have developed capabilities at LLNL to measure the shear strength of adhesive-bonded HE joints.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Approximating Joint Chance Constraints in Two-Stage Stochastic Programs

We present various approximations to joint chance constraints arising in two-stage stochastic programming models. Our approximations are derived from three classical inequalities: Markov's inequality, Chebysev's inequality, and Chernoff's bound. We provide preliminary computational results illustrating the quality of our approximation using a two-stage joint-chance-constrained stochastic program from the literature. We also briefly introduce other alternatives for constructing approximations for joint-chance-constrained two-stage programs.

97 MATHEMATICS AND COMPUTING↗

A Solution to Asymmetric Marangoni GTA Weld Behavior in a Dissimilar Chemistry Stainless Steel Joint [Slides]

Asymmetric and irregular weld morphology is an issue with the 9516 shipping container GTA weld. Observation of the weld puddle and cross sections showed the weld was biased toward the body side of the joint. This issue is attributed to a difference in the sulfur content and Marangoni fluid flow characteristics of the lid (150 ppm) and body (10 ppm) components of the weld joint. An additional contributing factor in this issue is the large difference in mass between the ½” thick lid and 1/8” thick body. A solution was developed comprised of a preliminary partial penetration weave pass across the joint intended to homogenize the sulfur content prior to the full penetration pass.

42 ENGINEERING↗

Possible routes to a strong science case for a joint CLEoPATRA-Roman microlensing survey

The Contemporaneous LEnsing Parallax and Autonomous TRansient Array (CLEoPATRA) is a mis sion concept for a space-based microlensing survey, proposed to enhance science for the Roman Space Telescope (RST) microlensing survey. From CLEoPATRA’s planned vantage point in geosynchronous equatorial orbit (GEO), it will observe microlensing events simultaneously and from a different point of view to RST at L2. This joint L2-GEO observation baseline gives a projected angular separation of order the size of the characteristic angular lensing scale of Free-Floating-Planets (FFPs) in the Galaxy, making it powerful for constraining FFP properties. We find that a strong science case will demonstrate which parts of the FFP parameter space a joint RST-CLEoPATRA survey will give lead ing lens constraints compared with competing ground- and space- based RST observatory companions (e.g., PRIME, Euclid). Both the simulations and framework that connect telescope capabilities to physical constraints already exist for RST FFPs and can be used to demonstrate the power of joint RST-CLEoPATRA survey, with the addition of a simulated CLEoPATRA event blending distribution. Population-level FFP constraints could also be calculated by adapting ongoing black hole microlensing research at Lawrence Livermore National Laboratory. We also find that considering CLEoPATRA as a third space-based observatory (in addition to RST and Euclid/PRIME), which will break microlensing degeneracies leading to unambiguous FFP constraints, is worth investigating as part of a science case. Finally, we highlight possible auxiliary CLEoPATRA science cases including relieving tension between the RST Core Community Surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

LightMAT - Pediction of Aluminum/Steel Joint Failure

Develop a predictive model of dissimilar metallic spot joints and their behavior during fracture; specifically, whether the joint fractures via interfacial fracture or button pull-out as a function of alloy, sheet thickness, faying interface microstructure, and thermal-mechanical treatment of the weld nugget and heat affected zone. Having the ability to model whether a given joint structure would fracture inter-facially or via button pullout will reduce development time and provide savings to vehicle design programs. This would provide a significant step function improvement in reducing the time-to-market for this multi-material, weight-saving technology.

36 MATERIALS SCIENCE↗

Self-Pierce Riveting (SPR) Process Simulation, Analyses, and Development for Magnesium Joints

The purpose of the SPR project is to provide a reliable mechanical joining technology for Mg joint applications and to enable the success of mechanical fastening of Mg by assisting the Mg SPR process development and cycle time through rivet process simulation and experimentation. This will be achieved by providing actual SPR joint performance data of Mg/Mg and Mg/dissimilar metal joints, so that more accurate data is applied to the overall structural design, and by developing process windows to provide design recommendations/guidelines for effective Mg SPR joining.

36 MATERIALS SCIENCE↗

Joint Sample Analyses of Nuclear Forensic Materials Provided by the Republic of Kazakhstan: U. S. Laboratory Results

This document serves as an interim report to summarize sample analyses performed by Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL) on a series of five nuclear forensics samples provided by the Institute of Nuclear Physics (INP) in the Republic of Kazakhstan. The sample set contains four uranium oxide powders and one low-enriched uranium fuel pellet. The samples were provided as part of a broader collaboration that involved a set of joint sample analyses conducted by INP and the US National Laboratories. The joint analyses are being conducted using well-developed analytical plans. These activities are designed to support the advancement of nuclear forensic science and capacity building in all three institutes in both countries. This report builds upon an earlier preliminary summary of the joint interactions and will be augmented by a final report. The final report will summarize the results and value of all sample analyses performed at the three institutes (INP, LLNL, and LANL). The final report will also provide an intercomparison of the results, analytical methods and best practices employed, as well as outline future collaborative nuclear forensics activities that are being developed in the Kazakhstan region.

and nuclear chemistry↗

Constraints on cosmology and baryonic feedback with joint analysis of Dark Energy Survey Year 3 lensing data and ACT DR6 thermal Sunyaev-Zel'dovich effect observations

We present a joint analysis of weak gravitational lensing (shear) data obtained from the first three years of observations by the Dark Energy Survey and thermal Sunyaev-Zel'dovich (tSZ) effect measurements from a combination of Atacama Cosmology Telescope (ACT) and Planck data. A combined analysis of shear (which traces the projected mass) with the tSZ effect (which traces the projected gas pressure) can jointly probe both the distribution of matter and the thermodynamic state of the gas, accounting for the correlated effects of baryonic feedback on both observables. We detect the shear$~\times~$tSZ cross-correlation at a 21$\sigma$ significance, the highest to date, after minimizing the bias from cosmic infrared background leakage in the tSZ map. By jointly modeling the small-scale shear auto-correlation and the shear$~\times~$tSZ cross-correlation, we obtain $S_8 = 0.811^{+0.015}_{-0.012}$ and $\Omega_{\rm m} = 0.263^{+0.023}_{-0.030}$, results consistent with primary CMB analyses from Planck and P-ACT. We find evidence for reduced thermal gas pressure in dark matter halos with masses $M < 10^{14} \, M_{\odot}/h$, supporting predictions of enhanced feedback from active galactic nuclei on gas thermodynamics. A comparison of the inferred matter power suppression reveals a $2-4\sigma$ tension with hydrodynamical simulations that implement mild baryonic feedback, as our constraints prefer a stronger suppression. Finally, we investigate biases from cosmic infrared background leakage in the tSZ-shear cross-correlation measurements, employing mitigation techniques to ensure a robust inference. Our code is publicly available on GitHub.

Pandey, S. [Johns Hopkins U.; Columbia U.] (ORCID:↗

State-Specific Prevalence of Inactivity, Self-Rated Health Status, and Severe Joint Pain Among Adults With Arthritis — United States, 2019

Arthritis is associated with joint pain, disability, and physical inactivity, potentially resulting in poor quality of life. The Centers for Disease Control and Prevention analyzed 2019 Behavioral Risk Factor Surveillance System data to estimate state-specific arthritis prevalence and, among adults with arthritis, the prevalence of physical inactivity, fair/poor self-rated health status, and severe joint pain. Among adults with arthritis, age-standardized prevalences of physical inactivity, fair/poor health status, and severe joint pain were high in all states and highest in southeastern states. Increased promotion and use of evidence-based public health interventions for arthritis may improve health-promoting behaviors and health outcomes among adults with arthritis.

59 BASIC BIOLOGICAL SCIENCES↗

Universal bellows joint restraint permits angular and offset movement

Universal joint-type restraint that employs ball joints permits maximum angular and lateral offset movement in a bellows joint without danger of rupture or pressure drop in the line. It is used in high pressure and high temperature applications in refineries, steam plants, or stationary power plants.

Kuhn, R. F., Jr.↗

Photosensors used to maintain welding electrode-to-joint alignment

Photosensors maintain electrode-to-joint alignment in automatic precision arc welding. They detect the presence and relative position of a joint to be welded and actuate a servomechanism to guide the welding head accordingly thus permitting alignment for more than straight line or true circle joints.

Bowen, J. B.↗

Tube-to-header joint for bimetallic construction

Design advantages of bimetallic construction enables an all-welded bimetallic joint to be made from the accessible header side of the tube-to-header joint. In the two-piece header design the weld joints completely seal the tube-header plate crevice and prevent crevice and stringer corrosion.

Lessmann, G. G.↗

Method for reinforcing tubing joints

Joint repair technique uses a longitudinally split aluminum shield over the joint ferrule and immediately adjacent tubing to reseal or reinforce leaking or weak joints in small tubing. Epoxy resin coating on inside surfaces of the two shield halves provides a tightly sealed bond between shield and tubing.

Kinzler, J.↗

Improvement of adhesive-bonded structural joints

Investigation is described of methods for obtaining uniform shear stress distribution in adhesives used in double-lap bonded joints. Design rules for reducing adhesive peak shear stresses are listed. Test results of an analysis of straight-lap joint design and stepped-lap joint design are given.

Evensen, H. A.↗

Improved TIG weld joint strength in aluminum alloy 2219-T87 by filler metal substitution

The results of an investigation on weld joint characteristics of aluminum alloy 2219-T87 are given. Five different alloys were utilized as filler material. The mechanical properties of the joints were determined at ambient and cryogenic temperatures for weldments in the as-welded condition and also, for weldments after elevated temperature exposures. Other evaluations included hardness surveys, stress corrosion susceptibility, and to a limited extent, the internal metallurgical weld structures. The overall results indicate that M-943 filler weldments are superior in strength to weldments containing either the standard 2319 filler or fillers 2014, 2020, and a dual wire feed consisting of three parts 2319 and one part 5652. In addition, no deficiencies were evident in M-934 filler weldments with regard to ductility, joint strength after elevated temperature exposure, weld hardness, metallographic structures, or stress corrosion susceptibility.

Poorman, R. M.↗

Thermal conductance in a bolted joint.

The thermal contact resistance of a bolted joint is composed of two components: large scale constriction which is influenced by the extent of the interfacial pressure distribution and small scale constriction which is influenced by the magnitude of the local pressure. It is analytically shown how the roughness asperities at the contact surfaces of the joint affect these two constrictions but in opposite senses. The sum of the two effects, the total resistance, may increase or decrease with changing resistance and examples are given where an optimum roughness will minimize total joint resistance.

Roca, R. T.↗