SEARCH · Engineering Papers

Results for “inverse prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Modelling the growth of triglycine sulphate crystals in Spacelab 3

Two triglycine sulphate crystals were grown from an aqueous solution in Spacelab 3 aboard a Space Shuttle. Using a diffusion coefficient of 0.00002 sq cm/s, a computerized simulation gave reasonable agreement between experimental and theoretical crystal sizes and interferometric lines in the solution near the growing crystal. This diffusion coefficient is larger than most measured values, possibly due to fluctuating accelerations on the order of .001 g (Earth's gravity). The average acceleration was estimated to be less than .000001 g. At this level, buoyancy driven convection is predicted to add approx. 20 percent to the steady state growth rate. Only very slight distortion of the interferometric lines was observed at the end of a 33 hr run. It is suggested that the time to reach steady state convective transport may be inversely proportional to g at low g, so that the full effect of convection was not realized in these experiments.

Yoo, Hak-Do↗

NASA NTRS2006

A Nonlinear Reduced Order Method for Prediction of Acoustic Fatigue

The goal of this investigation is to assess the quality of high-cycle-fatigue life estimation via a reduced order method, for structures undergoing geometrically nonlinear random vibrations. Modal reduction is performed with several different suites of basis functions. After numerically solving the reduced order system equations of motion, the physical displacement time history is obtained by an inverse transformation and stresses are recovered. Stress ranges obtained through the rainflow counting procedure are used in a linear damage accumulation method to yield fatigue estimates. Fatigue life estimates obtained using various basis functions in the reduced order method are compared with those obtained from numerical simulation in physical degrees-of-freedom.

Przekop, Adam↗

DOE OSTI2021

Coexisting normal and intruder configurations in 32 Mg

Situated in the so-called “island of inversion,” the nucleus 32 Mg is considered as an archetypal example of the disappearance of magicity at N = 20. We report on high statistics in-beam spectroscopy of 32 Mg with a unique approach, in that two direct reaction probes with different sensitivities to the underlying nuclear structure are employed at the same time. More specifically, states in 32 Mg were populated by knockout reactions starting from 33 Mg and 34 Si, lying inside and outside the island of inversion, respectively. The momentum distributions of the reaction residues and the cross sections leading to the individual final states were confronted with eikonal-based reaction calculations, yielding a significantly updated level scheme for 32 Mg and spin-parity assignments. By fully exploiting observables obtained in this measurement, a variety of structures coexisting in 32 Mg was unraveled. Comparisons with theoretical predictions based on shell-model overlaps allowed for clear discrimination between different structural models, revealing that the complete theoretical description of this key nucleus is yet to be achieved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Exploring the Computational Aspects of Propylene Oligomerization Catalysis Using M′ 2 M Type Trimetallic MOF Nodes

Metal-organic frameworks have emerged as promising materials in the field of catalysis. They offer an optimal ground for screening catalysts and tailoring their catalytic properties. Here, in this work, via density functional theory (DFT) calculations, we investigated the catalytic activity of the trimetallic MOF nodes, M' 2 M for propylene oligomerization, by varying the active metal M from Sc to Cu with M' being Fe, aiming to grasp the impact of altering the active atoms on the catalyst's activity. Additionally, we examined how substituting the spectator atom, M', with other transition metals, i.e., from Sc to Cu, affects these energy barriers, keeping Ni as the active metal. We proposed several cases with lower or comparable energy barriers to the experimentally reported Fe 2 Ni trimetallic MOF node. In addition, we found a correlative relationship between spin-density from natural population analysis and energy barriers in the realm of C-C bond formation, whereby an elevation in spin-density is found to be inversely proportional to the magnitude of the energy barriers. Moreover, we calculated the energy barriers for C-C coupling and beta-hydride elimination using multireference NEVPT2 calculations on top of the CASSCF wave function to validate the rate-determining step that is predicted by DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Visualization of Aluminum Ions at the Mica Water Interface Links Hydrolysis State-to-Surface Potential and Particle Adhesion

When hydrolyzable cations such as aluminum interact with solid-water interfaces, macroscopic interfacial properties (e.g., surface charge and potential) and interfacial phenomena (e.g., particle adhesion) become tightly linked with the microscopic details of ion adsorption and speciation. We use in situ atomic force microscopy to directly image individual aluminum ions at a mica-water interface and show how adsorbate populations change with pH and aluminum activity. Complementary streaming potential measurements then allow us to build a triple layer model (TLM) that links surface potentials to adsorbate populations, via equilibrium binding constants. Our model predicts that hydrolyzed species dominate the mica-water interface, even when unhydrolyzed species dominate the solution. Ab initio molecular dynamics (AIMD) simulations confirm that aluminum hydrolysis is strongly promoted at the interface. The TLM indicates that hydrolyzed adsorbates are responsible for surface-potential inversions, and we find strong correlations between hydrolyzed adsorbates and particle-adhesion forces, suggesting that these species mediate adhesion by chemical bridging.

Legg, Benjamin A.↗

DOE OSTI2025

Emulation of the calculations of final r -process abundance patterns with a neural network

This work explores the construction of a fast emulator for the calculation of the final pattern of nucleosynthesis in the rapid neutron capture process (the r-process). An emulator is built using a feed-forward artificial neural network (ANN). We train the ANN with nuclear data and relative abundance patterns. We take as input the β-decay half-lives and the one-neutron separation energy of the nuclei in the rare-earth region. The output is the final isotopic abundance pattern. In this work, we focus on the nuclear data and abundance patterns in the rare-earth region to reduce the dimension of the input and output space. We show that the ANN can capture the effect of the changes in the nuclear physics inputs on the final r-process abundance pattern in the adopted astrophysical conditions. We employ the deep ensemble method to quantify the prediction uncertainty of the neural network emulator. The emulator achieves a speed-up by a factor of about 20 000 in obtaining a final abundance pattern in the rare-earth region. The emulator may be utilized in statistical analyses such as uncertainty quantification, inverse problems, and sensitivity analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Physics-Informed Deep Learning for Reconstruction of Spatial Missing Climate Information in the Antarctic

Understanding the influence of the Antarctic on the global climate is crucial for the prediction of global warming. However, due to very few observation sites, it is difficult to reconstruct the rational spatial pattern by filling in the missing values from the limited site observations. To tackle this challenge, regional spatial gap-filling methods, such as Kriging and inverse distance weighted (IDW), are regularly used in geoscience. Nevertheless, the reconstructing credibility of these methods is undesirable when the spatial structure has massive missing pieces. Inspired by image inpainting, we propose a novel deep learning method that demonstrates a good effect by embedding the physics-aware initialization of deep learning methods for rapid learning and capturing the spatial dependence for the high-fidelity imputation of missing areas. We create the benchmark dataset that artificially masks the Antarctic region with ratios of 30%, 50% and 70%. The reconstructing monthly mean surface temperature using the deep learning image inpainting method RFR (Recurrent Feature Reasoning) exhibits an average of 63% and 71% improvement of accuracy over Kriging and IDW under different missing rates. With regard to wind speed, there are still 36% and 50% improvements. In particular, the achieved improvement is even better for the larger missing ratio, such as under the 70% missing rate, where the accuracy of RFR is 68% and 74% higher than Kriging and IDW for temperature and also 38% and 46% higher for wind speed. In addition, the PI-RFR (Physics-Informed Recurrent Feature Reasoning) method we proposed is initialized using the spatial pattern data simulated by the numerical climate model instead of the unified average. Compared with RFR, PI-RFR has an average accuracy improvement of 10% for temperature and 9% for wind speed. When applied to reconstruct the spatial pattern based on the Antarctic site observations, where the missing rate is over 90%, the proposed method exhibits more spatial characteristics than Kriging and IDW.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1974

Remote sensing techniques for mapping range sites and estimating range yield

Image interpretation procedures for determining range yield and for extrapolating range information were investigated for an area of the Pine Ridge Indian Reservation in southwestern South Dakota. Soil and vegetative data collected in the field utilizing a grid sampling design and digital film data from color infrared film and black and white films were analyzed statistically using correlation and regression techniques. The pattern recognition techniques used were K-class, mode seeking, and thresholding. The herbage yield equation derived for the detailed test site was used to predict yield for an adjacent similar field. The herbage yield estimate for the adjacent field was 1744 lbs. of dry matter per acre and was favorably compared to the mean yield of 1830 lbs. of dry matter per acre based upon ground observations. Also an inverse relationship was observed between vegetative cover and the ratio of MSS 5 to MSS 7 of ERTS-1 imagery.

Benson, L. A.↗

NASA NTRS1985

On the emission region of gamma ray bursts

Within the last few years the rapid accumulation of gamma ray burst spectral data, especially those of KONUS and solar maximum mission, has made the confrontation between theories of the gamma ray emission mechanisms and observations much more urgent and challenging. At present the most viable mode seems to be some combination of inverse Comptonization and synchrotron emission. Here, an attempt is made to limit the acceptable parameter space of the emission region by taking into account the maximum set of observational constraints. These are then applied to two specific scenarios: surface emission versus magnetospheric emission. Some observable predictions based on these scenarios are considered.

Liang, E. P.↗

NASA NTRS1998

The Net Exchange Between Terrestrial Ecosystems and the Atmosphere as a Result of Changes in Land Use

The general purpose of this research was to improve and update (to 1990) estimates of the net flux of carbon between the world's terrestrial ecosystems and the atmosphere from changes in land use (e.g., deforestation and reforestation). The estimates are important for understanding the global carbon cycle, and for predicting future concentrations of atmospheric CO2 that will result from emissions. The emphasis of the first year's research was on the northern temperate zone and boreal forests, where the greatest discrepancy exists between estimates of flux. Forest inventories suggest net sinks of 0.6 PgC/yr; inversion analyses based on atmospheric data and models suggest much larger sinks 2-3.6 PgC/yr (e.g., Tans et al. 1990, Ciais et al. 1995). The work carried out with this grant calculated the flux attributable to changes in land use. The estimated flux was somewhat smaller than the flux calculated from inventory data suggesting that environmental changes have led to a small accumulation of carbon in forests that exceeds the accumulation expected from past rates of harvest. Two publications have described these results (Houghton 1996, 1998). The large difference between these estimates and those obtained with atmospheric data and models remains unexplained. The recent estimate of a 1.7 PgC/yr sink in North America, alone (Fan et al. 1998), is particularly difficult to explain. That part of the sink attributable to land-use change, however, is defined as a result of this grant.

Houghton, R. A.↗

NASA NTRS2000

GPS Sounding Rocket Development at NASA with Simultaneous Multi-Payload Tracking Application

An inverse differential GPS system has been developed for Sounding Rocket use which includes the flight unit and a ground station capable of extracting GPS data from sounding rocket telemetry, performing a real time differential solution and graphically displaying the rocket's path relative to a predicted trajectory plot. Accuracy has been proven to within less than 10 meters. Postprocessing has increased the precision to within 10 - 20 centimeters. The system has been successfully flown several times and delivered to the Sounding Program Office for routine field use. In addition to providing position, velocity and time GPS data has been used on sounding rockets for vehicle performance analysis, effecting a one hundred fold improvement in data time tagging, and steering an optical tracking device to intercept payloads launched from over the horizon. Precise velocity separation information and timing has been provided to multiple payload systems. Future plans include its use for Range Safety and enabling of interferometric techniques. The technology and software developed also has potential application to small satellite navigation and formation flying.

Bull, Barton↗

NASA NTRS2011

The Distribution of Chromosomal Aberrations in Human Cells Predicted by a Generalized Time-Dependent Model of Radiation-Induced Formation of Aberrations

New experimental data show how chromosomal aberrations for low- and high-LET radiation are dependent on DSB repair deficiencies in wild-type, AT and NBS cells. We simulated the development of chromosomal aberrations in these cells lines in a stochastic track-structure-dependent model, in which different cells have different kinetics of DSB repair. We updated a previously formulated model of chromosomal aberrations, which was based on a stochastic Monte Carlo approach, to consider the time-dependence of DSB rejoining. The previous version of the model had an assumption that all DSBs would rejoin, and therefore we called it a time-independent model. The chromosomal-aberrations model takes into account the DNA and track structure for low- and high-LET radiations, and provides an explanation and prediction of the statistics of rare and more complex aberrations. We compared the program-simulated kinetics of DSB rejoining to the experimentally-derived bimodal exponential curves of the DSB kinetics. We scored the formation of translocations, dicentrics, acentric and centric rings, deletions, and inversions. The fraction of DSBs participating in aberrations was studied in relation to the rejoining time. Comparisons of simulated dose dependence for simple aberrations to the experimental dose-dependence for HF19, AT and NBS cells will be made.

Ponomarev, Artem L.↗

DOE OSTI2025

Solving high-dimensional inverse problems using amortized likelihood-free inference with noisy and incomplete data

Here, we present a likelihood-free probabilistic inversion method based on normalizing flows for high-dimensional inverse problems. The proposed method is composed of two complementary networks: a summary network for data compression and an inference network for parameter estimation. The summary network encodes raw observations into a fixed-size vector of summary features, while the inference network generates samples of the approximate posterior distribution of the model parameters based on these summary features. The posterior samples are produced in a deep generative fashion by sampling from a latent Gaussian distribution and passing these samples through an invertible transformation. We construct this invertible transformation by sequentially alternating conditional invertible neural network and conditional neural spline flow layers. The summary and inference networks are trained simultaneously. We apply the proposed method to an inversion problem in groundwater hydrology to estimate the posterior distribution of the log-conductivity field conditioned on spatially sparse time-series observations of the system’s hydraulic head responses. The conductivity field is represented with 706 degrees of freedom in the considered problem. Comparison with the likelihood-based iterative ensemble smoother PEST-IES method demonstrates that the proposed method accurately estimates the parameter posterior distribution and the observations’ predictive posterior distribution at a fraction of the inference time of PEST-IES.

conditional invertible neural network↗

DOE OSTI2020

Search for TiO and Optical Nightside Emission from the Exoplanet WASP-33b

With a temperature akin to an M dwarf, WASP-33b is among the hottest Jupiters known, making it an ideal target for high-resolution optical spectroscopy. By analyzing both transmission and emission spectra, we aim to substantiate previous reports of atmospheric TiO and a thermal inversion within the planet’s atmosphere. We observed two transits and six arcs of the phase curve with the Echelle SpectroPolarimetric Device for the Observation of Stars (ESPaDOnS) on the Canada–France–Hawaii Telescope and High Resolution Echelle Spectrometer (HIRES) on the Keck telescope, which provide high spectral resolution and ample wavelength coverage. We employ the Doppler cross-correlation technique to search for the molecular signatures of TiO and H{sub 2}O in these spectra, using models based on the TiO line list of Plez. Though we cannot exclude line-list-dependent effects, our data do not corroborate previous indications of a thermal inversion. Instead we place a 3σ upper limit of 10{sup −9} on the volume mixing ratio of TiO for the T–P profile we consider. While we are unable to constrain the volume mixing ratio of water, our strongest constraint on TiO comes from dayside emission spectra. This apparent absence of a stratosphere sits in stark contrast to previous observations of WASP-33b as well as theoretical predictions for the atmospheres of highly irradiated planets. The discrepancy could be due to variances between line lists, and we stress that detection limits are only as good as the line list employed, and are only valid for the specific T–P profile considered due to the strong degeneracy between lapse rate (dT/dlogP) and molecular abundance.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Direct and Inverse Photoelectron Spectroscopy Evidence for a Revised Picture of Electronic States of Negative Polarons in n‐Doped C 60

Abstract Determining the electronic levels associated with polarons, the fundamental charge carriers in organic semiconductors, is key to understanding the charge transport properties of these materials. Recent findings challenge the traditional view of these electronic levels by highlighting the importance of intra‐molecular Coulomb interactions in polarons. Experimental evidence was previously presented for a revised model of the negative polaron in the case of the polymer semiconductor poly(NDI2OD‐T 2 ); there, the addition of an excess electron was seen to lead to the emergence of a singly occupied state within the energy gap of the undoped material and an unoccupied state above the edge of the conduction states . Here, focus is on a small‐molecule semiconductor, C 60 , and spectral evidence is provided of a similar picture for the new states appearing upon polaron formation. Specifically, direct and inverse photoemission spectroscopy is used to investigate the density of states in C 60 films n‐doped with two dimeric dopants. The Coulomb interaction energy (Hubbard U ) of the C 60 anion is experimentally determined to be ≈1.1 eV, a value that aligns closely with theoretical predictions.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Preconditioned least‐squares Petrov–Galerkin reduced order models

Abstract In this article, we introduce a methodology for improving the accuracy and efficiency of reduced order models (ROMs) constructed using the least‐squares Petrov–Galerkin (LSPG) projection method through the introduction of preconditioning. Unlike prior related work, which focuses on preconditioning the linear systems arising within the ROM numerical solution procedure to improve linear solver performance, our approach leverages a preconditioning matrix directly within the minimization problem underlying the LSPG formulation. Applying preconditioning in this way has the potential to improve ROM accuracy for several reasons. First, preconditioning the LSPG formulation changes the norm defining the residual minimization, which can improve the residual‐based stability constant bounding the ROM solution's error. The incorporation of a preconditioner into the LSPG formulation can have the additional effect of scaling the components of the residual being minimized to make them roughly of the same magnitude, which can be beneficial when applying the LSPG method to problems with disparate scales (e.g., dimensional equations, multi‐physics problems). Importantly, we demonstrate that an “ideal preconditioned” LSPG ROM (a ROM in which the preconditioner is the inverse of the Jacobian of its corresponding full order model) emulates projection of the full order model solution increment onto the reduced basis. This quantity defines a lower bound on the error of a ROM solution for a given reduced basis. By designing preconditioners that approximate the Jacobian inverse—as is common in designing preconditioners for solving linear systems—it is possible to obtain a ROM whose error approaches this lower bound. The proposed approach is evaluated on several mechanical and thermo‐mechanical problems implemented within the Albany HPC code and run in the predictive regime, with prediction across material parameter space. We demonstrate numerically that the introduction of simple Jacobi, Gauss‐Seidel, and ILU preconditioners into the proper orthogonal decomposition/LSPG formulation reduces significantly the ROM solution error, the reduced Jacobian condition number, the number of nonlinear iterations required to reach convergence, and the wall time (thereby improving efficiency). Moreover, our numerical results reveal that the introduction of preconditioning can deliver a robust and accurate solution for test cases in which the unpreconditioned LSPG method fails to converge.

Lindsay, Payton↗

DOE OSTI2023

Apparent temperatures of neutron-poor and neutron-rich compound nuclei

The possibility of the dependence of the nuclear caloric curve on neutron excess sets a limit on the accuracy of our knowledge of the nuclear equation of state, and thus impacts predictive capabilities of nuclear reaction and nuclear astrophysics models. To date, theoretical models have not reached consensus on the magnitude or sign on the asymmetry dependence. To provide constraints, we have measured evaporated particles and heavy residues for complete and incomplete fusion-evaporation reactions in inverse kinematics. The temperatures extracted from the observed light charged particles tend to favor higher temperatures for the neutron-rich fused systems, though they are near the limits of the systematic uncertainty. The present measurement may be used as an upper limit to constrain the asymmetry dependence of the nuclear caloric curve.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Near-half-metallic state in the half-Heusler PtMnSb film on a III-V substrate

The interplay between half-metallic ferromagnetism and spin-orbit coupling within the inversion-symmetry-broken structure of half Heuslers provides an ideal platform for various spintronics functionalities. Taking advantage of good lattice matching, it is highly desired to epitaxially integrate promising Heuslers into III-V semiconductor-based devices. PtMnSb is one of the first half Heuslers predicted to be an above-room-temperature half-metal with large spin orbit coupling, however, its half-metallicity and potential as a spintronics material has remained elusive due to lack of high quality samples. Here, in this study, we demonstrate epitaxial growth of single crystal PtMnSb(001) film on GaSb(001) substrates using molecular beam epitaxy. Direct observation of the band structure via angle-resolved photoemission spectroscopy and many-body perturbation theory within the quasi-particle self-consistent GW approximation (QPGW) reveal that PtMnSb hosts rather a near-half-metallic state with both spin bands crossing the Fermi level and with high spin polarization over 90%. Temperature dependence of magnetization also shows an anomalous enhancement below 60 K, which can be associated with the development of such a near-half-metallic state at low temperatures. Epitaxial growth of high crystalline PtMnSb on a III-V paves the way for systematic clarification of its spin transport properties with fine-tuning of strain in heterostructure devices.

36 MATERIALS SCIENCE↗