Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interfacial energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Beneficial Effect of Li 5 FeO 4 Lithium Source for Li-Ion Batteries with a Layered NMC Cathode and Si Anode

The energy density of lithium-ion batteries can be increased by replacing the traditional graphite anode with a high capacity silicon anode. However, volume changes and interfacial instabilities cause a large irreversible capacity and a continual loss of lithium during cycling, which lead to rapid capacity loss. In this work, we add Li 5 FeO 4 (LFO) to a LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC) cathode as a pre-lithiation additive, which increases the lithium inventory and extends the cycle life of Si-graphite/NMC full cells, and decreases the NMC particle degradation. LFO delivers a large 764 mAh g –1 LFO capacity below 4.7 V vs Li/Li + . By tuning the LFO content in Si-graphite/LFO-NMC full cells, we show higher capacity, improved retention, lower impedance, and superior rate performance compared to full cells without LFO. Post-test characterizations demonstrate that LFO inclusion in the cathode matrix leads to less NMC secondary particle segregation/cracking and a thinner surface reduced layer on the NMC particles. The beneficial effects of LFO endure after the lithium reserve has been exhausted, highlighting a lasting synergy between the lithium source and electrode active materials. This study introduces a new approach to simultaneously increase lithium inventory and reduce cathode degradation, and makes critical advances toward enabling Si anodes for lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Ion Solvation Engineering: How to Manipulate the Multiplicity of the Coordination Environment of Multivalent Ions

During free energy analysis of solvation structures of free divalent cations, their ion pairs, and neutral aggregates in low dielectric solvents reveals the multiplicity of thermodynamically stable cation solvation configurations and identifies the micro- and macroscopic factors responsible for this phenomenon. Specifically, we show the role of ion-solvent interactions and solvent mixtures in determining the cation solvation free energy landscapes. We show that it is the entropic contribution of solvent degrees of freedom that is responsible for the solvation multiplicity, and the mutual balance between enthalpic and entropic forces or their concerted contributions is what ultimately defines the most stable ion solvation configuration and creates new ones. We show general consequences of ion solvation multiplicity on thermodynamics of complex electrolytes, specifically in the context of homogeneous or interfacial charge transfer. Identified factors and their interplay provide a pathway to formulation of solvation design rules that can be used to control bulk solvation, interfacial chemistry, and charge transfer. Our findings also suggest experimentally testable predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Chemomechanical Function of the Silver–Carbon Interlayer in Sheet-type All-Solid-State Lithium–Metal Batteries

All-solid-state batteries with lithium metal anodes hold great potential for high-energy battery applications. However, forming and maintaining stable solid–solid contact between the lithium anode and solid electrolyte remains a major challenge. One promising solution is the use of a silver–carbon (Ag–C) interlayer, but its chemomechanical properties and impact on interface stabilities need to be comprehensively explored. Here, we examine the function of Ag–C interlayers in addressing interfacial challenges using various cell configurations. Experiments show that the interlayer improves interfacial mechanical contact, leading to a uniform current distribution and suppressing lithium dendrite growth. Furthermore, the interlayer regulates lithium deposition in the presence of Ag particles via improved Li diffusivity. The sheet-type cells with the interlayer achieve a high energy density of 514.3 Wh L –1 and an average Coulombic efficiency of 99.97% over 500 cycles. Furthermore, this work provides insights into the benefits of using Ag–C interlayers for enhancing the performance of all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Directing the adsorption and assembly of laponite nano-discs at oil–water interfaces

Achieving tunable controls on the adsorption and self-assembly of nanoscale building blocks at immiscible fluid interfaces is essential for synthesizing advanced materials, stabilizing emulsions, and the sustainable storage and recovery of fluids. Although extensive efforts have been directed toward resolving the assembly of spherical nanoparticles at water–hydrocarbon interfaces, 2D nanoparticles have received far less attention. In this study, we developed novel controls to direct the adsorption and assembly of 2D laponite nano-discs (diameter = ∼30 nm and thickness = ∼1 nm) at water–heptane interfaces using traces of sodium dodecyl sulfate (SDS) surfactant, demonstrated by advanced in situ small-angle X-ray scattering, atomic force microscopy, spinning drop tensiometer measurements and molecular dynamics simulations. The results show that SDS surfactant displaces the adsorbed laponite nano-discs from the interface toward the aqueous phase. The extent of this displacement increases with SDS concentration such that high SDS concentrations convert laponite-rich interfaces to SDS-rich interfaces free of laponite nano-discs. This transformation is associated with significant alterations in the rheological and nanomechanical properties of the host interface. In this context, reduction in interfacial tension and interfacial stiffness and an increase in the interfacial deformation is observed on increasing the SDS concentration from 0 to 0.1 wt%. The displacement of laponite nano-discs from the interface is driven by strong electrostatic interactions between the hydrophilic SDS group and interfacial water molecules. These studies unlock new insights into the adsorption and assembly of 2D nanoscale particles at water–hydrocarbons interfaces that are relevant for various applications related to energy and environmental science and engineering.

interfacial tension↗
DOE OSTI2024

Electrolyte–Electrocatalyst Interfacial Effects of Polymeric Materials for Tandem CO 2 Capture and Conversion Elucidated Using In Situ Electrochemical AFM

Integrating CO 2 capture and electrochemical conversion has been proposed as a strategy to reduce the net energy required for CO 2 regeneration in traditional CO 2 capture and conversion schemes and can be coupled with carbon-free renewable electricity. Polyethylenimine (PEI)-based materials have been previously studied as CO 2 capture materials and can be integrated in these reactive capture processes. PEI-based electrolytes have been found to significantly increase the CO 2 loading, and impact selectivity and rate of product formation when compared to the conventional aqueous electrolytes. However, the influence of these materials at the catalyst–electrode interface is currently not well understood. In this study, PEI-based electrolytes were prepared and their impact on the morphology of a silver electrode performing electrochemical CO 2 reduction (CO 2 R) was studied using in situ electrochemical atomic force microscopy (EC-AFM). The presence of PEI on the electrode surface could be distinguished based on nanomechanical properties (DMT modulus), and changes were observed as negative polarization was applied, revealing a reorganization of the PEI chains due to electrostatic interactions. These changes were impacted by the electrolyte composition, including the addition of supporting electrolyte KHCO 3 salt, as well as CO 2 captured by the PEI-based electrolyte, which minimized the change in surface mechanical properties and degree of PEI alignment on the electrode surface. The changes in surface mechanical properties were also dependent on the PEI polymer length, with higher molecular weight PEI showing different reconfiguration than the shorter polymer brushes. The study highlights that the choice of polymer material, the electrolyte composition, and CO 2 captured impact the nearelectrode environment, which has implications for CO 2 R, and presents EC-AFM as a new tool that can be used to probe the dynamic behavior of these interfaces during electrocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Avoiding CO 2 Improves Thermal Stability at the Interface of Li 7 La 3 Zr 2 O 12 Electrolyte with Layered Oxide Cathodes

Abstract Solid‐state batteries promise higher energy densities and better safety than Li‐ion batteries with liquid electrolytes. However, the interface between solid electrolyte and cathode is unstable at the elevated temperatures that are needed while sintering to achieve good bonding between ceramic components. Here, the hypothesis is that, the gas environment, especially the presence of CO 2, is critical in determining the stability of the solid electrolyte–cathode interface. The effect of gas species on the interface is systematically probed, by a using Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolyte with a thin film LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode as a model system to enable interface sensitivity. Detrimental phases formed at the interface and their onset conditions are identified by X‐ray absorption spectroscopy, X‐ray diffraction, and Gibbs free energy analysis. As a result, removing CO 2 and minimizing H 2 O(g) during sintering is necessary to obtain good contact at the LLZO|cathode interface without forming secondary phases. Sintering in O 2 is ideal, yielding excellent chemical stability and low interfacial resistance. Secondary phases also do not form in N 2, but oxygen loss occurs at elevated temperatures. The interfacial resistance obtained upon sintering in pure O 2 is comparable to the lowest values at LLZO interfaces with protective coatings, but here without the need for interface coatings.

25 ENERGY STORAGE↗
NASA NTRS1996

[Two-phase Interfaces in Weak External Fields]

Our aim has been that of understanding from first principles the behavior of two-phase interfaces in the absence of gravitational constraints. This is fundamental to our ability to deal with the fluid structures that abound in the real biological, chemical, and physical world. A substantial effort was mounted to determine how familiar hydrodynamic concepts have to be modified and interpreted to make them appropriate to the multi-level structure alluded to above. This was primarily in the context of the microscopic symmetric pressure tensor, which was, for the first time, expressed in the invaluable density functional format, and the used to follow the predictions of popular microscopic models of the energetics of interfacial systems. In the course of these investigations, the previous murky relation between pressure tensor and thermodynamics was completely clarified. The process of extending thermodynamic information to interfacial dynamics was initiated along two paths. One was from the viewpoint of an inertialess lattice gas, resulting in the surprising conclusion that at this level, all transport is governed by precisely the thermodynamic free energy, albeit with a non-trivial effective particle mobility. The other aimed at understanding the fashion in which slow macroscopic motions, accounted for by a time-varying microscopic energy, generate effective hydrodynamic parameters. By examining a solvable model system, it was found that all current procedures for doing so are deficient, and suitable alleviation suggested. The major effect of this project was to set the stage for the analysis of the substantial dynamical regimes in which extensive equilibrium information provides the dominant background. This produces a smooth junction to the models of Araki and Munakata, Giacomin and Lebowitz, and Oxtoby. It is also crucial to our understanding of the complex interfacial equilibrium configurations required for intermediate stages of two-phase separation, for which the "phase-field" techniques we have been developing are uniquely effective. And it puts us within striking range of the physical experiments that can provide incisive tests of the theoretical framework.

Percus, J. K.↗
NASA NTRS2009

Moisture-Induced Alumina Scale Spallation: The Hydrogen Factor

For some time our community has been concerned with interfacial spallation of protective alumina scales, not just upon immediate cooldown, but as a time-delayed phenomenon. Moisture-induced delayed spallation (MIDS) and desktop spallation (DTS) of TBC's refer to this process. It is most apparent for relatively adherent alumina scales that have survived cool down in a dry environment, built up considerable thickness and strain energy, and have been somewhat damaged, such as by cyclic oxidation cracking. Indeed, a "sweet zone" can be defined that maximizes the observed effect as a function of all the relevant factors. Moisture has been postulated to serve as a source of interfacial hydrogen embrittlement derived from reaction with aluminum in the alloy at an exposed interface. The purpose of this monograph is to trace the close analogy of this phenomenon to other hydrogen effects, such as embrittlement of aluminides and blistering of alloys and anodic alumina films. A formalized, top-down, logic tree structure is presented as a guide to this discussion. A theoretical basis for interfacial weakening by hydrogen is first cited, as are demonstrations of hydrogen as a reaction product or detected interfacial species. Further support is provided by critical experiments that produce the same moisture effect, but by isolating hydrogen from other potential causative factors. These experiments include tests in H2-containing atmospheres or cathodic hydrogen charging.

Smialek, James L.↗
DOE OSTI2024

Formation of the oxyl’s potential energy surface by the spectral kinetics of a vibrational mode

One of the most reactive intermediates for oxidative reactions is the oxyl radical, an electron-deficient oxygen atom. The discovery of a new vibration upon photoexcitation of the oxygen evolution catalysis detected the oxyl radical at the SrTiO3 surface. The vibration was assigned to a motion of the sub-surface oxygen underneath the titanium oxyl (Ti–O●−) created upon hole transfer to (or electron extraction from) a hydroxylated surface site. Evidence for such an interfacial mode is derived from its spectral shape, which exhibited a Fano resonance—a coupling of a sharp normal mode to continuum excitations. Here, this Fano resonance is utilized to derive precise formation kinetics of the oxyl radical and its associated potential energy surface (PES). From the Fano lineshape, the formation kinetics are obtained from the anti-resonance (the kinetics of the coupling factor), the resonance (the kinetics of the coupled continuum excitations), and the frequency integrated spectrum (the kinetics of the normal mode’s cross-section). All three perspectives yield logistic function growth with a half-rise of 2.3 ± 0.3 ps and a time constant of 0.48 ± 0.09 ps. A non-equilibrium transient associated with photoexcitation is separated from the rise of the equilibrated PES. The logistic function characterizes the oxyl coverage at the very initial stages (t ∼ 0) to have an exponential growth rate that quickly decreases toward zero as a limiting coverage is reached. Such time-dependent reaction kinetics identify a dynamic activation barrier associated with the formation of a PES and quantify it for oxyl radical coverage.

Chemistry↗
DOE OSTI2024

Healable and conductive sulfur iodide for solid-state Li–S batteries

Solid-state Li-S batteries (SSLSBs) are made of low-cost and abundant materials free of supply chain concerns. Owing to their high theoretical energy densities, they are highly desirable for electric vehicles. However, the development of SSLSBs has been historically plagued by the insulating nature of sulfur and the poor interfacial contacts induced by its large volume change during cycling, impeding charge transfer among different solid components. We report an S 9.3 I molecular crystal with I 2 inserted in the crystalline sulfur structure, which shows a semiconductor-level electrical conductivity (approximately 5.9 × 10 -7 S cm -1 ) at 25 °C; an 11-order-of-magnitude increase over sulfur itself. Iodine introduces new states into the band gap of sulfur and promotes the formation of reactive polysulfides during electrochemical cycling. Further, the material features a low melting point of around 65 °C, which enables repairing of damaged interfaces due to cycling by periodical remelting of the cathode material. As a result, an Li-S 9.3 I battery demonstrates 400 stable cycles with a specific capacity retention of 87%. The design of this conductive, low-melting-point sulfur iodide material represents a substantial advancement in the chemistry of sulfur materials, and opens the door to the practical realization of SSLSBs.

25 ENERGY STORAGE↗
DOE OSTI2026

Photoelectron Spectroscopic Determination of the Interfacial Energetics of Metal Oxide Protection Layers on p-InP Photocathodes

The interfacial energetics between p-type InP and a series of metal oxides, including TiO 2 , Nb 2 O 5 , Ta 2 O 5 , and HfO 2 , were evaluated using X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and optical absorption spectroscopy. The energy of the conduction-band minimum ( E cb ) of TiO 2 and Nb 2 O 5 was more negative (i.e., further from the vacuum level) than the conduction-band minimum at the surface of InP ( E cb,s ), whereas E cb for Ta 2 O 5 and HfO 2 was more positive than E cb,s for InP. The data are consistent with the electrochemical behavior of p-InP coated with various metal oxide candidate protection layers, with TiO 2 and Nb 2 O 5 facilitating interfacial transfer of photogenerated minority-carrier electrons in p-InP photocathodes, and Ta 2 O 5 and HfO 2 blocking photogenerated electrons in p-InP from readily transferring across the oxide-coated photocathodes. The energy of the valence-band maximum ( E vb ) for all of the oxides was much more negative than E vb,s for InP, consistent with observations that these protection layers effectively block hole transport and consequently suppress oxidative degradation of the underlying p-InP photocathodes.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2022

Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO 2

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. Interfacial mixing can readily occur at temperatures required for complete film crystallization and can significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here we show a two-step sequence involving the growth of an epitaxial LiCoO 2 cathode layer followed by the deposition of a binary transition metal oxide (WO 3 , TiO 2 , and others) in which controlled lithiation of the binary oxide occurs. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li 2 WO 4 and model anode material Li 4 Ti 5 O 12 occurs as WO 3 and TiO 2 nucleate their respective host lattices and attract Li ions from the underlying cathode. The cathode layer readily provides a tunable amount of Li ions for the controlled lithiation of the subsequent layer. We demonstrate that this approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Confinement of Ti 3 C 2 T x MXene Nanosheets within a Polymer Matrix via In-situ Polymerization and Deposition on Carbon Cloth for Supercapacitors

Here, with the promising preliminary electrochemical performance, further investigation into polymer-filler interfacial regulation and confined ion transport in the CC/polymer/MXene system could provide deeper insights, paving the way for its application in flexible supercapacitors and other energy storage devices requiring highly adaptable electrodes.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Homogeneous crystal nucleation in binary metallic melts

A method for calculating the homogeneous crystal nucleation frequency in binary metallic melts is developed. The free energy of crystallization is derived from regular solution models for the liquid and solid and is used, together with model-based estimates of the interfacial tension, to calculate the nucleation frequency from the classical theory. The method can account for the composition dependence of the maximum undercooling observed in a number of experiments on small droplet dispersions. It can also be used to calculate the driving force for crystal growth and to obtain more precise estimates of the homogeneous crystal nucleation frequency in glass-forming alloys. This method, although approximate, is simple to apply, and requires only knowledge of the phase diagram and a few readily available thermodynamic quantities as input data.

Thompson, C. V.↗
DOE OSTI2020

Kinetic versus Thermodynamic Stability of LLZO in Contact with Lithium Metal

Li 7 La 3 Zr 2 O 12 (LLZO) garnet-based oxides are a promising class of solid electrolytes used as the separator in all-solid-state batteries (ASSBs). While LLZO is considered to have a wide electrochemical stability window, its intrinsic stability in contact with lithium metal is not sufficiently well understood, and there is still a debate on the key question of whether LLZO does or does not form passivation layers before and during cycling. Utilizing both in situ and operando X-ray photoelectron spectroscopy techniques, in this work we reveal the presence of a kinetic barrier to the reduction of LLZO by Li metal, with the extent of oxygen-deficient interphase (ODI) formation depending sensitively on the energetics of Li metal arriving at the Li vertical bar LLZO interface. Despite the clear presence of a kinetic barrier to reduction, the electrochemical response of the Li vertical bar LLZO interface is unchanged by the presence of the ODI, indicating that ODI formation during electrochemical cycling does not hinder charge transfer across the Li vertical bar LLZO interface. Overall, these results reveal that the reactivity of LLZO with Li metal depends not only on the material properties of the adjoining phases (i.e., surface purity and active contact) and their resulting thermodynamic stability but also on the energy input at the interface and the resulting reaction kinetics. Furthermore, the presence of a kinetic barrier to reduction highlights the additional complexities governing the reactivity of solid-state interfaces in ASSBs and underscores the importance of operando characterization of interfacial stability to design more robust, high-performance protection strategies for solid electrolytes in contact with reactive electrodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Molecular dynamics study on the interfacial properties of mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders on graphene and graphite surfaces

This study investigates the behavior of two different mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders, polyvinylpyrrolidone:polyvinylidene difluoride (PVP:PVDF) and polyvinylpyrrolidone:polyacrylic acid (PVP:PAA), at graphene and graphite interfaces using classical molecular dynamics simulations. The aim is to identify the best performing monomer binder blend and carbon-based material for the design of battery-optimized energy devices. The PVP:PAA monomer binder blend and graphite are found to have the best interaction energies, densification upon adsorption, and more ordered structure. The adsorption of both monomer binder blends is strongly guided by the higher affinity of PVP and PAA monomeric molecules for the surfaces compared to PVDF. The structure of adsorbed layers of PVP:PVDF monomer binder blend on graphene and graphite develops more quickly than PVP:PAA, indicating faster kinetics. This study complements a previous density functional theory study recently reported by our group and contributes to a better understanding of the nanoscopic features of relevant interfacial regions involving mixtures of monomers of PVP-based battery binders and different carbon-based materials. In conclusion, the effect of a blend of commonly used monomer binders on carbon-based materials is essential for obtaining tightly bound anode and cathode active materials in lithium-ion batteries, which is crucial for designing battery-optimized energy devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Degradation of Lithium Iron Phosphate Sulfide Solid-State Batteries by Conductive Interfaces

The superionic solid-state argyrodite electrolyte Li 6 PS 5 Br can improve lithium and lithium-ion batteries' safety and energy density. Despite many reports validating the conductivity of this electrolyte, it still suffers from passivating electrode degradation mechanisms. At first analysis, lithium iron phosphate (LFP) should be more thermodynamically stable in contact with sulfide electrolytes. However, without substantial improvements to interfacial engineering, we find that LFP is not inherently stable against Li 6 PS 5 Br. We hypothesize argyrodite oxidation favorably competes with LFPAs delithiation, insulating the electrolyte-electrode interface and causing large overpotential losses. We show that compared to LiNi x Mn y Co z O 2 , LFP has no actual electrochemical stability advantage despite operating at a lower voltage. We utilize tender energy XAS and XPS to show that chemical reactions occur between LFP and the Li 6 PS 5 Br solid electrolyte and these reactions are exacerbated by cycling. We also show that electrochemical degradation occurs at the interface between the solid electrolyte ion conductor and any electron conductor, namely the active material and carbon additives. We further demonstrate that LiNbO 3 cathode coatings on LFP can delay electrochemical degradation by electronically insulating the LFP-sulfide electrolyte interface but not prevent its occurrence at the carbon-electrolyte interface.

25 ENERGY STORAGE↗
DOE OSTI2022

Interfacial antiferromagnetic phase induced two-step magnetization reversal in PbZr 0.52 Ti 0.48 O3/La 0.67 Sr 0.33 MnO 3 superlattices

Artificial multiferroic heterostructures have recently attracted much interests due to the demonstrated magnetoelectric coupling (MEC) and unique functionalities, promising a tantalizing perspective of novel applications in next-generation electronic, memory, sensor, and energy harvesting technologies. Herein, we report a two-step magnetization reversal in PbZr 0.52 Ti 0.48 O 3 /La 0.67 Sr 0.33 MnO 3 (PZT/LSMO) superlattices, which originates from the strongly entangled strain-, ferroelectric (FE)-polarization-, and exchange-dependent effects. Specifically, the preferential occupancy of the in-plane Mn d x 2 -y 2 orbitals is triggered via the collective effects of the large tensile strain and FE polarization, giving rise to an interfacial antiferromagnetic (AFM) layer with strong AFM anisotropy. The strong spin exchange coupling between the AFM layer and the adjacent ferromagnetic (FM) layer facilitates the magnetic stratification of the FM layer, leading to two coercivities, i.e., two-step magnetization reversal. Meanwhile, a sizeable exchange bias (EB) field is induced. The emerged two-step magnetization reversal concomitant with the pronounced EB phenomenon should be a signature of an enhanced MEC in PZT/LSMO superlattices. Finally, our results will stimulate further interests in multiferroic superlattices in applications of multiferroic-based devices.

36 MATERIALS SCIENCE↗