Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interconnections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

On the thermoelastic analysis of solar cell arrays and related material properties

Accurate prediction of failure of solar cell arrays requires accuracy in the computation of thermally induced stresses. This was accomplished by using the finite element technique. Improved procedures for stress calculation were introduced together with failure criteria capable of describing a wide range of ductile and brittle material behavior. The stress distribution and associated failure mechanisms in the N-interconnect junction of two solar cell designs were then studied. In such stress and failure analysis, it is essential to know the thermomechanical properties of the materials involved. Measurements were made of properties of materials suitable for the design of lightweight arrays: microsheet-0211 glass material for the solar cell filter, and Kapton-H, Kapton F, Teflon, Tedlar, and Mica Ply PG-402 for lightweight substrates. The temperature-dependence of the thermal coefficient of expansion for these materials was determined together with other properties such as the elastic moduli, Poisson's ratio, and the stress-strain behavior up to failure.

Salama, M. A.↗

SSL: A software specification language

SSL (Software Specification Language) is a new formalism for the definition of specifications for software systems. The language provides a linear format for the representation of the information normally displayed in a two-dimensional module inter-dependency diagram. In comparing SSL to FORTRAN or ALGOL, it is found to be largely complementary to the algorithmic (procedural) languages. SSL is capable of representing explicitly module interconnections and global data flow, information which is deeply imbedded in the algorithmic languages. On the other hand, SSL is not designed to depict the control flow within modules. The SSL level of software design explicitly depicts intermodule data flow as a functional specification.

Austin, S. L.↗

Structural dynamics, stability, and control of helicopters

The dynamic synthesis of a helicopter is reported. The method of approach is a variation of the component mode synthesis in the sense that it regards the aircraft as an assemblage of interconnected substructures. The equations of motion are derived in general form by means of the Lagrangian formulation in conjunction with an orderly kinematical procedure that takes into account the superposition of motion of various substructures, thus circumventing constraint problems.

Meirovitch, L.↗

An analytical study and wind tunnel tests of an aeromechanical gust-alleviation system for a light airplane

The results of an analytical study of a system using stability derivatives determined in static wind tunnel tests of a 1/6 scale model of a popular, high wing, light airplane equipped with the gust alleviation system are reported. The longitudinal short period mode dynamics of the system are analyzed, and include the following: (1) root loci, (2) airplane frequency responses to vertical gusts, (3) power spectra of the airplane responses in a gust spectrum, (4) time history responses to vertical gusts, and (5) handling characteristics. The system reduces the airplane's normal acceleration response to vertical gusts while simultaneously increasing the pitching response and reducing the damping of the longitudinal short period mode. The normal acceleration response can be minimized by using the proper amount of static alleviation and a fast response system with a moderate amount of damping. The addition of a flap elevator interconnect or a pitch damper system further increases the alleviation while moderating the simultaneous increase in pitching response. The system provides direct lift control and may reduce the stick fixed longitudinal static stability.

Stewart, E. C.↗

General Purpose Computer (GPC) to GPC systems interface description

The General Purpose Computer (GPC) 'subsystem' of the Orbiter Data Processing System was described. Two interface areas are discussed. One is the area of GPC intraconnections and intracommunications involving the hardware/software interface between the Central Processing Unit (CPU) and the Input/Output Processor (IOP). The other is the area of GPC interconnections and intercommunications and involves the hardware/software interface between the five Orbiter GPC's. Based on the detailed GPC interface given, it is felt that the basic CPU to IOP interface and the GPC to GPC interface have the potential for trouble free operation. However, due to the complexity of the interface and the criticality of GPC synchronization to overall avionics performance, the GPC to GPC interface should be carefully evaluated when attempting to resolve test anomalies that may involve GPC timing and synchronization errors.

Breyer, B. C.↗

Interconnnect and bonding technologies for large flexible solar arrays

Thermocompression bonding and conductive adhesive bonding are developed and evaluated as alternate methods of joining solar cells to their interconnect assemblies. Bonding materials and process controls applicable to fabrication of large, flexible substrate solar cell arrays are studied. The primary potential use of the techniques developed is on the solar array developed by NASA/MSFC and LMSC for solar electric propulsion (SEP) and shuttle payload applications. This array is made up of flexible panels approximately 0.7 by 3.4 meters. It is required to operate in space between 0.3 and 6 AU for 5 years with limited degradation. Materials selected must be capable of enduring this space environment, including outgassing and radiation.

Source record↗

FEP-TEFLON encapsulated solar cell modules Further progress

A progress report, starting with November 1973, is given in the design, development, and performance of lightweight flexible FET (Fluorinated Ethylene Propylene) encapsulated solar cell modules intended to form standardized building blocks for large roll-up or fold-up solar cell blankets with performances on the order of 100 W/sq m and 80 W/kg in near space. It is shown that interconnected FEP encapsulated modules of advanced design can withstand all typical ground handling, assembly, storage, and launch conditions, and are well suited for high-power space applications.

Rauschenbach, H. S.↗

Contributions to the National Geodetic Satellite Program by Goddard Space Flight Center

The major scientific contributions of Goddard Space Flight Center to the National Geodetic Satellite Program between 1965 and 1973 are presented and discussed. The primary results described are the determination of the earth's gravitational field from satellite tracking and surface gravimeter data to an accuracy of about 4 mGal for wavelengths of about 1000 km and larger; the construction of a detailed geoid suitable for geodetic, tectonic, and altimetry data analysis accurate to about 2 m over continents and to 2-5 m over the northeast Pacific and Atlantic oceans; and the positioning of globally distributed tracking stations to an accuracy of 5-10 m for the interconnecting of local geodetic datums. In addition, work on the observation of the earth and ocean tidal perturbations of satellites is discussed and reviewed.

Smith, D. E.↗

Mechanically coupled lift fan propulsion and control for multimission V/STOL aircraft

A two-engine, three-fan V/STOL airplane was designed to fulfill naval operational missions. Use of interconnected variable pitch fans led to a good balance between the requirements for high thrust and responsive control at low speed, and efficient thrust at cruise speeds. Engine-out requirements, integration of propulsion and aerodynamic controls, and the propulsion installation were the major factors influencing the configuration. An airplane with a multimission capability from both vertical and short takeoff was conceived.

Zabinsky, J. M.↗

Connective stability of large-scale stochastic systems

The procedure of decomposition-aggregation analysis reported by Siljak (1973) and Grujic and Siljak (1973) has been used in a study of the connective-stability aspects of large-scale stochastic systems. An investigation is conducted of the tolerance of a system of interconnected deterministic subsystems to both deterministic and stochastic interactions. The connective stability in the mean is considered and the connective property of stability is defined. The defined concept is included in a modification of the comparison theorem described by Ladde (1975). Attention is also given to a derivation of the sufficient conditions for the connective stability in the mean.

Ladde, G. S.↗

Observations of low energy interplanetary electrons

Observations of the temporal behavior of low energy (0.16-6 MeV) at 1 AU are reported. The electron intensity is found to vary by a factor of more than five from one quiet time to another, including short-term enhancements of the type reported at higher electron energies. Over a period of about four months, beginning with the time at which the interplanetary field line first connects earth and Jupiter, the magnitude and frequency of the increases grow abruptly and remain high. The observed longitudinal distribution of Jovian electrons could be the result of the interconnection of the interplanetary field with an extended Jovian magnetotail.

Mewaldt, R. A.↗

Relation of large-scale coronal X-ray structure and cosmic rays. II - Coronal control of interplanetary injection of 300 keV protons

We report the striking coronal control of low-energy solar particles from the solar flare of September 7, 1973. The flare was at S18, W46 (Carrington longitude 188 deg) in McMath Plage Region 12307. We find strong intensity gradients in heliolongitude (about 10% per deg) that are nearly identical in protons, helium, and medium nuclei at energies about 0.5 MeV/nuc, as well as relativistic electrons and 3 MeV protons. This pervasive gradient occurs at longitudes over bright X-ray emission structures east of the flare site which interconnect large-scale chromospheric polarity regions identifiable in H-alpha filtergrams.

Roelof, E. C.↗

Large-scale systems - Stability, complexity, reliability

This paper establishes the connective stability concept in the framework of the comparison principle and vector Liapunov functions, as a natural setting for resolving the complexity vs reliability problem in the control of large-scale dynamic systems. The central result is the following: a stable complex system when composed as a competitive structure of the interconnected stable subsystems remains stable despite the on-off participation of the subsystems. This result is important in that it can be used efficiently to synthesize reliable complex systems by multilevel feedback control.

Siljak, D. D.↗

Fast Na/+/-ion transport in skeleton structures

The skeleton structures considered in the investigations consist of a rigid subarray with an interconnected interstitial space in which ions move in three dimensions. The classes of skeleton structures investigated include the Im3 phase of high-pressure KSbO3, the defect-pyrochlore structure illustrated by RbMgAlF6, and the carnegieite structure of high-temperature NaAlSiO4. A description is given of the results obtained in transport measurements involving dense polycrystalline ceramic disks. Results obtained in the case of the Na(+)-ion transport in Na3Zr2PSi2O12 appear particularly promising concerning the possible use of such substances in solid-electrolyte applications.

Goodenough, J. B.↗

Observations of Jovian electrons at 1 AU

It has recently been suggested that electrons of Jovian origin are responsible for the quiet-time increases in the electron intensity greater than 3 MeV observed at 1 AU. Using data from electron/isotope spectrometers on Imp 7 and 8, the temporal behavior of quiet-time electrons at 1 AU is studied over the period October 1972 through May 1975. The 1- to 6-MeV electron intensity is found to vary by a factor of about 10 from one quiet-time period to another, including numerous short-term enhancements characteristic of the quiet-time increases reported during 1964-1972. The magnitude and frequency of the increases grow abruptly and remain high for an approximate 4-month period beginning with the time at which the interplanetary field line first connects earth and Jupiter. It is suggested that the interconnection of the interplanetary field with an extended Jovian magnetotail of about 2 AU in length could result in the observed longitudinal distribution of Jovian electrons of 1 AU.

Mewaldt, R. A.↗

Decentralization, stabilization, and estimation of large-scale linear systems

In this short paper we consider three closely related aspects of large-scale systems: decentralization, stabilization, and estimation. A method is proposed to decompose a large linear system into a number of interconnected subsystems with decentralized (scalar) inputs or outputs. The procedure is preliminary to the hierarchic stabilization and estimation of linear systems and is performed on the subsystem level. A multilevel control scheme based upon the decomposition-aggregation method is developed for stabilization of input-decentralized linear systems Local linear feedback controllers are used to stabilize each decoupled subsystem, while global linear feedback controllers are utilized to minimize the coupling effect among the subsystems. Systems stabilized by the method have a tolerance to a wide class of nonlinearities in subsystem coupling and high reliability with respect to structural perturbations. The proposed output-decentralization and stabilization schemes can be used directly to construct asymptotic state estimators for large linear systems on the subsystem level. The problem of dimensionality is resolved by constructing a number of low-order estimators, thus avoiding a design of a single estimator for the overall system.

Siljak, D. D.↗

Stability and control of maneuvering high-performance aircraft

Stability and control characteristics of a high-performance aircraft have been examined over a wide range of maneuvering flight conditions, in order to identify general rules for the design of departure-preventing control systems. This has been accomplished using fully coupled linear dynamic models which account for nonzero mean values of aerodynamic angles and angular rates. Stability augmentation systems derived from optimal control theory are shown to maintain stable, well-damped aircraft dynamics over a wide range of maneuvering flight conditions. This design approach generates cross-feeds and control interconnects (as well as conventional feedback terms) for improved aircraft stability.

Stengel, R. F.↗

Magnetospheric plasma regions and boundaries

The boundaries of the various regions of the magnetospheric plasma are considered, taking into account the bow shock, the magnetopause, the outer boundary of the plasma sheet, the inner boundary of the plasma sheet, and the trapping boundary for energetic particles. Attention is given to the steady state, or quasi-steady state, to substorm effects in which temporal changes are important, and to primary auroral processes. A description is presented of the high latitude lobes of the magnetotail. The characteristics of magnetic field topology associated with interconnected interplanetary and geomagnetic field lines are illustrated with the aid of a graph.

Heikkila, W. J.↗