SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
PolySi:Ga/SiO2 passivated contacts were prepared using ion implantation and dopant inks to introduce Ga into a-Si. Following crystallization anneals these p-type contacts exhibited improved passivation (iVoc of about 730 mV) over B-doped passivated contacts for solar cells.
Stretchable electrical interconnects and substrate materials are increasingly used to create flexible and con-formable electronic systems for soft robotics, smart textiles, and wearable devices. Wires fabricated using composite or liquid conductive inks encapsulated in silicone enable high strain and are mechanically robust. The resistance of these inter-connects increases with strain, which can present challenges for power delivery and signaling among electronic components. However, this effect can be used directly to estimate strain within a stretchable circuit without the need for additional sensor components. In this work, we present an approach for fabricating fully-stretchable, multi-layer active circuit arrays in silicone using liquid metal paste interconnects, in which power and data wires are re-purposed as strain sensors to estimate substrate deformation. As a proof-of-principle, we demonstrate a 3×3 active circuit array that self-senses relative voltage supply at each node to estimate deformation and consumes less than 10 mA per node. Each node is digitally addressable and performs both analog measurement and digital conversion. All interconnects are fabricated using liquid metal paste, and power, data, and sensing are performed over a shared, four-wire interface in this multi-layer stretchable printed circuit board.
Disclosed are functional materials for use in additive manufacturing (AM). The functional material can comprise an elastomeric composition (e.g., a silicone composite) for use in, for example, direct ink writing. The elastomeric composition can include and elastomeric resin, and a magnetic nanorod filler dispersed within the elastomeric resin. Nanorod characteristics (e.g., length, diameter, aspect ratio) can be selected to create 3D-printed constructs with desired mechanical properties along different axes. Furthermore, since nickel nanorods are ferromagnetic, the spatial distribution and orientation of nanorods within the continuous phase can be controlled with an external magnetic field. This level of control over the nanostructure of the material system offers another degree of freedom in the design of functional parts and components with anisotropic properties. Magnetic fields can be used to remotely sense compression of the constructs, or alternatively, control the stiffness of these materials.
Shelf-stable, rapid crosslinking, “all-in-one” pastes useful as “inks” in additive manufacturing are provided. These pastes exhibit desirable rheological flow properties and crosslinking upon exposure to UV light. The pastes are based on vinylsilyl-functionalized, completely amorphous, linear terpolysiloxanes containing predominantly dimethylsiloxy-repeat units with small amounts of diphenylsiloxy-, methylphenylsiloxy-, diethylsiloxy-, and/or methyltrifluoroalkylsiloxy-crystallization disruptors. The base polymers are preferably compounded with a trimethylsilylated-hydrophobic silica filler, thixotropic flow agent, hydrosilyl-functionalized oligomeric crosslinker, and a catalytic system comprising platinum(II) acetylacetonate or trimethyl(methylcyclopentadienyl)-platinum(IV), and diethyl azodicarboxylate.
Shelf-stable, rapid crosslinking, “all-in-one” pastes useful as “inks” in additive manufacturing are provided. These pastes exhibit desirable rheological flow properties and crosslinking upon exposure to UV light. The pastes are based on vinylsilyl-functionalized, completely amorphous, linear terpolysiloxanes containing predominantly dimethylsiloxy-repeat units with small amounts of diphenylsiloxy-, methylphenylsiloxy-, diethylsiloxy-, and/or methyltrifluoroalkylsiloxy-crystallization disruptors. The base polymers are preferably compounded with a trimethylsilylated-hydrophobic silica filler, thixotropic flow agent, hydrosilyl-functionalized oligomeric crosslinker, and a catalytic system comprising platinum(II) acetylacetonate or trimethyl(methylcyclopentadienyl)-platinum(IV), and diethyl azodicarboxylate.
The present invention relates to architected stamps having beneficial printing properties. In particular, negative Poisson ratio structures and/or porous reservoirs can be employed to control fluid dynamics and to provide metered ink transfer.
A cathode configured for use within a fuel cell system is provided. The cathode includes a cathode substrate. The cathode further includes a coating disposed upon the cathode substrate and including a fluorocarbon polymer additive configured for sintering at a temperature of less than 200° C. The fluorocarbon polymer additive may be mixed with a catalyst ink coating or may be applied separately as a topcoat layer.
The invention is directed to latent metathesis-active resin compositions and additive manufacturing approaches. The latent metathesis-active compositions comprise at least one latent metathesis catalyst, at least one curable metathesis-active monomer, and optional fillers, photosensitizers, and/or a secondary monomer resin system for dual-cure. A method comprises extruding a latent metathesis-active resin from a dispensing apparatus and spatially triggering a ring-opening metathesis polymerization by directed irradiation with light or directed application of a thermal stimuli for direct-ink write printing of objects. Another method uses a latent metathesis-active resin for vat photopolymerization and stereolithographic printing of objects.
Disclosed are functional materials for use in additive manufacturing (AM). The functional material can comprise an elastomeric composition (e.g., a silicone composite) for use in, for example, direct ink writing. The elastomeric composition can include an elastomeric resin, and a magnetic nanorod filler dispersed within the elastomeric resin. Nanorod characteristics (e.g., length, diameter, aspect ratio) can be selected to create 3D-printed constructs with desired mechanical properties along different axes. Furthermore, since nickel nanorods are ferromagnetic, the spatial distribution and orientation of nanorods within the continuous phase can be controlled with an external magnetic field. This level of control over the nanostructure of the material system offers another degree of freedom in the design of functional parts and components with anisotropic properties. Magnetic fields can be used to remotely sense compression of the constructs, or alternatively, control the stiffness of these materials.
Systems and methods for controlling a material extrusion device to extrude a filament of an ink are provided. An extrusion printing control system collects from one or more sensors measurements representing an internal state of material extrusion processing during extrusion of the filament. In addition, the system collects an image of the filament as the filament is extruded. The system applies a classifier to the collected image to generate an image-derived state characterizing the filament. Based on the internal state and the image-derived state, the system estimates a derived state using a model. The system determines control parameters using the model to achieve a desired quality of the filament by minimizing a cost function based on the internal state, the image-derived state, the derived state, and constraints of the material extrusion device. Finally, the system provides the control parameters to a controller of the material extrusion device.
Shelf-stable, rapid crosslinking, “all-in-one” pastes useful as “inks” in additive manufacturing are provided. These pastes exhibit desirable rheological flow properties and crosslinking upon exposure to UV light. The pastes are based on vinylsilyl-functionalized, completely amorphous, linear terpolysiloxanes containing predominantly dimethylsiloxy- repeat units with small amounts of diphenylsiloxy-, methylphenylsiloxy-, diethylsiloxy-, and/or methyltrifluoroalkylsiloxy- crystallization disruptors. The base polymers are preferably compounded with a trimethylsilylated-hydrophobic silica filler, thixotropic flow agent, hydrosilyl-functionalized oligomeric crosslinker, and a catalytic system comprising platinum (II) acetylacetonate or trimethyl(methylcyclopentadienyl)-platinum (IV), and diethyl azodicarboxylate.
A product of additive manufacturing with a silicone-based ink includes a plurality of continuous filaments comprised of a siloxane matrix, wherein the continuous filaments are arranged in a geometric pattern, a plurality of inter-filament pores defined by the geometric pattern of the continuous filaments, and a plurality of intra-filament pores having an average diameter in a range of greater than 1 micron to less than 50 microns.
Structural health monitoring (SHM) of compact heat exchangers (CHXs) operating in extreme environments is essential for ensuring system reliability, safety, and longevity. This study presents the development of high-temperature sensors fabricated via aerosol jet printing (AJP) using platinum ink, selected for its exceptional thermal stability, oxidation resistance, and electrical conductivity. AJP enables precise deposition of fine-feature sensor patterns onto complex geometries, making it well-suited for integration within CHX architectures. To enhance sensor durability, an alumina-based ceramic protective layer was printed over the platinum sensing elements. The sensors demonstrated stable, repeatable performance up to 900?°C during extended thermal cycling. A custom test setup was developed to evaluate sensor accuracy and robustness under steady-state and transient conditions. Substrate screening identified HG-1 ceramic-coated stainless steel as the most effective platform, offering strong adhesion and low resistance. Furthermore, electric field-assisted sintering (EFAS) was employed to embed the sensors into stainless steel 316L matrices without degrading their functionality. Post-embedding electrical tests confirmed sensor integrity, and initial characterization suggests strong potential for in-situ monitoring. This work provides a scalable strategy for integrating high-performance temperature sensors directly into refractory components, advancing embedded SHM technologies for harsh operating environments.
SAND2022-1477 O Slice-Write is an extremely powerful toolpath generation technology for the extrusion 3D printing community. This application was developed as a standalone post-processor capable of interpreting and translating gcode output from Ultimaker Cura, an open-source slicing application for additive manufacturing, not designed or intended for direct ink write (DIW) printing. Slice-Write can convert output gcode from Cura into a format compatible with Aerotech-based motion control DIW printing platforms. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.
Polymer-bonded explosive molding powder, or “prills,” are relied on for the fabrication of pressed high explosives since the 1950's. The wet granulation technique, also known as “slurry coating,” that is used to formulate prills, is a complex process that results in polydisperse and variable yields. This makes it difficult to study the mesoscale effect that prills have on the microstructure of a pressed article. The following study introduces a novel approach to energetic granulation that leverages techniques used in the additive manufacturing of paste-like energetic materials. This extrusion granulation, or prill printing technique, makes it possible to tailor the sizes and shapes of prills, allowing for their morphological influences to be studied in a controlled manner. The following work details the fabrication and characterization of four monomodal size lots of prills using an inert formulation (95 wt.% melamine, 5 wt.% polymer binder). Prills from each size lot were die-pressed using a fixed recipe to investigate how prill size impacts compaction density and therefore compressive strength. It was found that larger prills influence the pressing density by creating larger defects within the microstructure of a pressed article, resulting in a decrease in compressive strength.
Methane (CH 4 ) emissions from wetland ecosystems are controlled by redox conditions in the soil, which are currently underrepresented in Earth system models. Plant-mediated radial oxygen loss (ROL) can increase soil O 2 availability, affect local redox conditions, and cause heterogeneous distribution of redox-sensitive chemical species at the root scale, which would affect CH 4 emissions integrated over larger scales. In this study, we used a subsurface geochemical simulator (PFLOTRAN) to quantify the effects of incorporating either spatially homogeneous ROL or more complex heterogeneous ROL on model predictions of porewater solute concentration depth profiles (dissolved organic carbon, methane, sulfate, sulfide) and column integrated CH 4 fluxes for a tidal coastal wetland. From the heterogeneous ROL simulation, we obtained 18% higher column averaged CH 4 concentration at the rooting zone but 5% lower total CH 4 flux compared to simulations of the homogeneous ROL or without ROL. This difference is because lower CH 4 concentrations occurred in the same rhizosphere volume that was directly connected with plant-mediated transport of CH 4 from the rooting zone to the atmosphere. Sensitivity analysis indicated that the impacts of heterogeneous ROL on model predictions of porewater oxygen and sulfide concentrations will be more important under conditions of higher ROL fluxes or more heterogeneous root distribution (lower root densities). Despite the small impact on predicted CH 4 emissions, the simulated ROL drastically reduced porewater concentrations of sulfide, an effective phytotoxin, indicating that incorporating ROL combined with sulfur cycling into ecosystem models could potentially improve predictions of plant productivity in coastal wetland ecosystems.
In addition to its ability to produce geometrically complex parts, additive manufacturing offers a unique opportunity to collect data about a component while it is being fabricated. However, there has only been limited effort to characterize parts morphologically and compositionally in situ. In this article, we present a layer-by-layer, laser profilometry-based in situ characterization technique as a method to digitally reconstruct a multi-material part. Data collected by the laser profilometer yields height maps and grayscale images which are voxelized using purpose-built software to volumetrically reconstruct the part. Additionally, the same part was also analyzed using X-ray computed tomography (CT) which was not able to resolve the different compositional regions within the part, but captured the filament morphology. The part was then bisected to compare the digital reconstruction to the actual part morphology and composition. Overall, the digital reconstruction was in good agreement with both the CT and bisected images. Deviations between the digital reconstruction and the CT/bisected images are likely the result of image segmentation settings or material shifts after data was collected. The in situ characterization method demonstrated here sets the stage for real time process monitoring and paves the way for additively manufactured parts that are “born qualified.”
Binder jetting is an additive manufacturing process that bonds powder through selectively depositing binder by inkjet printing. The part is then extracted and densified by sintering and/or infiltration. The process offers low costs and fast build rates, but properties can be poor due to residual porosity after sintering. The inkjet printing process may contribute to this residual porosity by creating large pores. The droplet kinetic energy ejects some powder particles from the bed and rearranges others. Particle ejection and rearrangement are theorized to create porous regions in binder-jetted parts. In this work, small amounts of moisture are added to the spread powder before printing and the impact on part formation, part properties, and printing parameters measured with varied droplet spacing, droplet velocity, and print frequency. Moisture is added by applying an atomized fluid mixture to the powder between layer spreading and binder printing. The fluid mixture partially evaporates but leaves a stable residue to increase cohesion and enhance imbibition. Moisture addition to the powder increases the range of droplet spacings for line formation while reducing particle ejection, powder rearrangement, and balling in layer and multilayer parts. Excessive moisture addition decreases the effective saturation of printed lines, but saturation in 3D parts is less impacted. Increased surface roughness in the first few layers of a print was also mitigated with prewetting. Finally, high-speed X-ray imaging verified prewetting reduction in particle ejection and rearrangement.