Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Estimation of Delamination Crack Depth Using Passive Thermography

Passive thermography is used to monitor small increases in temperature resulting from delamination damage formation in a composite hat-stiffened panel during quasi-static loading. The heating is composed of two heat generation components. The first component is an instantaneous response due to a strain release during quasi-static loading. The second component is mechanical heating, at the interface of failure, due to fracture damage. This second component produces a transient rise in temperature that is a function of the damage depth and thermal diffusivity. The first component defines the thermal start time for the transient response. A one-dimensional thermal model is used to determine the damage depth. The results are compared to ultrasonic and X-ray CT data. The advantages and limitations of the thermal technique for damage depth detection are discussed.

Zalameda, Joseph N.↗

Method of simultaneous measurement of radiative and lattice thermal conductivity.

A new technique of high-temperature thermal-conductivity measurement is described. A CO2 gas laser is used to generate a low-frequency temperature wave at one face of a small disk-shaped sample, and an infrared detector views the opposite face to detect the phase of the emerging radiation. A mathematical expression is derived which enables phase data at several frequencies to be used for the simultaneous determination of thermal diffusivity and mean extinction coefficient. Lattice and radiative thermal conductivities are then calculated. Test results for sintered aluminum oxide at temperatures from 530 to 1924 K are within the range of error of previously existing data.

Schatz, J. F.↗

The relationship between Saturn kilometric radiation and the solar wind

Voyager spacecraft radio, interplanetary plasma, and interplanetary magnetic field data are used to show that large amplitude fluctuations in the power generated by the Saturn kilometric radio emission are best correlated with solar wind ram pressure variation. In all, thirteen solar wind quantities previously found important in driving terrestrial magnetospheric substorms and other auroral processes were examined for evidence of correlations with the Saturn radio emission. The results are consistent with hydromagnetic wave or eddy diffusion processes driven by large scale solar wind pressure changes at Saturn's dayside magnetopause.

Desch, M. D.↗

The relationship between Saturn kilometric radiation and the solar wind

Voyager spacecraft radio, interplanetary plasma, and interplanetary magnetic field data are used to show that large amplitude fluctuations in the power generated by the Saturn kilometric radio emission are best correlated with solar wind ram pressure variation. In all, thirteen solar wind quantities previously found important in driving terrestrial magnetospheric substorms and other auroral processes were examined for evidence of correlations with the Saturn radio emission. The results are consistent with hydromagnetic wave or eddy diffusion processes driven by large scale solar wind pressure changes at Saturn's dayside magnetopause. Previously announced in STAR as N83-24445

Desch, M. D.↗

Gyroresonant pitch angle scattering by coherent and incoherent whistler mode waves in the magnetosphere

A test particle approach is used to compare gyroresonant pitch angle scattering of energetic electrons by coherent versus incoherent whistler mode waves, for the case in which the coherent wave amplitude is below the nonlinear phase trapping threshold. Wave packets of 400 ms duration propagating along the magnetic field at L = 4 within the plasmasphere are considered, and the wave-induced pitch angle scattering along the propagation path from one hemisphere to the other and the resulting precipitation flux are computed. An incoherent wave spectrum is simulated by random modulation of the wave frequency at intervals of 1 ms, thereby generating signals with nearly constant power spectral density over a bandwidth of 2 kHz centered at 5.5 kHz. The associated pitch angle scattering is compared with that of a monochromatic 5.5-kHz signal of 400 ms duration. Results of the test particle analysis are compared with those expected on the basis of a classical diffusion treatment, and an expression is derived for an effective “diffusion” coefficient for pitch angle scattering by coherent waves. The trajectory followed by a particle when interacting with incoherent waves essentially represents a random walk in velocity space, while for coherent waves the pitch angle of the particle varies in a well-defined manner. In spite of the fact that individual particle scatterings are typically larger for coherent waves, the peak precipitation fluxes induced by incoherent waves are found to be approximately the same as those for coherent waves having the same total power. This results from the fact that incoherent waves interact with particles over a wider range of energies. As a consequence, the energy spectrum and the temporal extent of transient precipitation pulses due to incoherent wave packets are broader than those for equivalent coherent ones.

Umran S Inan↗

Numerical simulation of axisymmetric turbulent flow in combustors and diffusers

Numerical studies of turbulent flow in an axisymmetric 45-deg-expansion combustor and bifurcated diffuser are presented. The Navier-Stokes equations incorporating a k-epsilon model were solved in a nonorthogonal curvilinear coordinate system. A zonal-grid method, where the flow field was divided into several subsections, was developed. This approach permitted different computational schemes to be used in the various zones. In addition, grid generation was made a more simple task. Boundary overlap and interpolating techniques were used, and an adjustment of the flow variables was required to assure conservation of mass flux. Three finite-differencing methods (hybrid, quadratic upwind, and skew upwind) were used to represent the convection terms. Results were compared with existing experimental data. In general, good agreement between predicted and measured values was obtained.

Yung, Chain-Nan↗

Interstellar dust as generator of x ray radiation

The x ray generation due to arising of hot dense plasma balls at high-velocity (greater than or equal to 70 km/s) collisions of dust grains in the interstellar medium is considered. Analytical expressions for efficiency of conversions of colliding dust particle kinetic energy into x ray radiation are presented. The observed intensity distribution of the diffuse component of soft cosmic x rays (0.1 to 1 keV) may be partly caused by collisions between the dusty components of high velocity clouds and of the disk of the Galaxy.

Ibadov, Subhon↗

Some Numerical Experiments on Detonation Wave Propagation

In this paper we present the results of a series of numerical experiments done on the propagation and initiation of a detonation wave. The calculations are performed in one-dimension, with considerable grid resolution. Of particular interest are the following questions: (1) the nature of periodic and chaotic instabilities generated by the wave; (2) the influence of the grid resolution on these instabilities; (3) the influence of the 'quality' of the numerical scheme; and (4) the influence of 'noise'. In the calculations, we use a second-order Total Variation Diminishing (TVD) scheme as the basic numerical method, with grid spacings as low as a fraction of a micron. Detonations waves are generated at the closed end of a tube, and allowed to propagate for approximately 20 cm. The required energy for successful initiation of the detonation will be measured for different cases of grid resolution and numerical schemes. A modified version of the TVD scheme has also been devised, which allows for much lower numerical diffusion of the radical species in the exponentially growing region behind the shock. The effect of this modification will be demonstrated. Oscillations in peak pressure and induction length are seen to develop in some cases: the oscillations can go through a sequence of modes, from a regular, high frequency mode to a low frequency mode with period doubling. A chaotic regime can also be obtained. General conclusions on the quality of algorithms will be presented. We will also discuss the performance of a version of the code developed on the IBM SP2 parallel computer.

Cambier, Jean-Luc↗

Residual Gases in Crystal Growth Systems: Their Origin, Magnitude, and Dependence on the Processing Conditions

Residual gases present in closed ampoules may affect different crystal growth processes. Their presence may affect techniques requiring low pressures and affect the crystal quality in different ways. For that reason a good understanding and control of formation of residual gases may be important for an optimum design and meaningful interpretation of crystal growth experiments. Our extensive experimental and theoretical study includes degassing of silica glass and generation of gases from various source materials. Different materials processing conditions, like outgassing under vacuum, annealing in hydrogen, resublimation, different material preparation procedures, multiple annealings, different processing times, and others were applied and their effect on the amount and composition of gas were analyzed. The experimental results were interpreted based on theoretical calculations on diffusion in silica glass and source materials and thermochemistry of the system. Procedures for a reduction of the amount of gas are also discussed.

Palosz, W.↗

Residual Gases in Crystal Growth Systems

Residual gases present in closed ampoules may affect different crystal growth processes. That seems to be particularly true under microgravity conditions where, due to weightlessness of the melt, the gases may lead to detached solidification and/or formation of voids and bubbles, as observed in the past. For that reason a good understanding and control of formation of residual gases is important for an optimum design and meaningful interpretation of crystal growth experiments. Our extensive experimental and theoretical studies of the subject, summarized in this paper, include degassing of silica glass and generation of gases from different source materials. Different materials processing conditions, like outgassing under vacuum, annealing in hydrogen, resublimation, different material preparation procedures, multiple annealings, different processing times, and others were applied and their effect on the amount and composition of gas were analyzed. The experimental results were interpreted based on theoretical calculations on diffusion in silica glass and source materials and thermochemistry of the system. Procedures for a reduction of the amount of gas are also discussed.

Palosz, W.↗

Crystal Lattice Controlled SiGe Thermoelectric Materials with High Figure of Merit

Direct energy conversion between thermal and electrical energy, based on thermoelectric (TE) effect, has the potential to recover waste heat and convert it to provide clean electric power. The energy conversion efficiency is related to the thermoelectric figure of merit ZT expressed as ZT=S(exp 2)(sigma)T/Kappa, T is temperature, S is the Seebeck coefficient, sigma is conductance and Kappa is thermal conductivity. For a lower thermal conductivity Kappa and high power factor (S(exp 2)(sigma)), our current strategy is the development of rhombohedrally strained single crystalline SiGe materials that are highly [111]-oriented twinned. The development of a SiGe "twin lattice structure (TLS)" plays a key role in phonon scattering. The TLS increases the electrical conductivity and decreases thermal conductivity due to phonon scattering at stacking faults generated from the 60 X rotated primary twin structure. To develop high performance materials, the substrate temperature, chamber working pressure, and DC sputtering power are controlled for the aligned growth production of SiGe layer and TLS on a c-plane sapphire. Additionally, a new elevated temperature thermoelectric characterization system, that measures the thermal diffusivity and Seebeck effect nondestructively, was developed. The material properties were characterized at various temperatures and optimized process conditions were experimentally determined. The present paper encompasses the technical discussions toward the development of thermoelectric materials and the measurement techniques.

Kim, Hyun-Jung↗

Progress of High Efficiency Centrifugal Compressor Simulations Using TURBO

Three-dimensional, time-accurate, and phase-lagged computational fluid dynamics (CFD) simulations of the High Efficiency Centrifugal Compressor (HECC) stage were generated using the TURBO solver. Changes to the TURBO Parallel Version 4 source code were made in order to properly model the no-slip boundary condition along the spinning hub region for centrifugal impellers. A startup procedure was developed to generate a converged flow field in TURBO. This procedure initialized computations on a coarsened mesh generated by the Turbomachinery Gridding System (TGS) and relied on a method of systematically increasing wheel speed and backpressure. Baseline design-speed TURBO results generally overpredicted total pressure ratio, adiabatic efficiency, and the choking flow rate of the HECC stage as compared with the design-intent CFD results of Code Leo. Including diffuser fillet geometry in the TURBO computation resulted in a 0.6 percent reduction in the choking flow rate and led to a better match with design-intent CFD. Diffuser fillets reduced annulus cross-sectional area but also reduced corner separation, and thus blockage, in the diffuser passage. It was found that the TURBO computations are somewhat insensitive to inlet total pressure changing from the TURBO default inlet pressure of 14.7 pounds per square inch (101.35 kilopascals) down to 11.0 pounds per square inch (75.83 kilopascals), the inlet pressure of the component test. Off-design tip clearance was modeled in TURBO in two computations: one in which the blade tip geometry was trimmed by 12 mils (0.3048 millimeters), and another in which the hub flow path was moved to reflect a 12-mil axial shift in the impeller hub, creating a step at the hub. The one-dimensional results of these two computations indicate non-negligible differences between the two modeling approaches.

turbomachinery↗

A study of some economic factors relating to the development and implementation of a satellite power system

Areas are examined relating to the design, development and implementation of a satellite power system (SPS): an analysis of the effect of energy R&D programs in general and SPS in particular on optimal fossil fuel consumption patterns, a study of alternative uses of SPS technologies, and a study of the electric power market penetration potential for SPS. It is shown that a credible program of R&D on long-range energy alternatives leads to lower optimal prices for fossil fuels, resulting in large short-term benefits accruing to the specific program elements. Several alternative uses of SPS technologies were identified; however the markets for these technologies are generally quite diffuse and difficult to assess. The notable exception is solar array technology which has, potentially, a very large non-SPS market. It is shown that the market for SPS units derives from two components of demand: the demand created by growth in the electrical energy demand which leads to an increased demand for baseload generating capacity, and a demand created by the need to replace retiring capacity.

Source record↗

Acceleration of cometary H2O group pickup ions by obliquely propagating nonlinear magnetosonic waves

The observations made during the encounter with comet Giacobini Zinner show that the character of MHD turbulence is governed by the magnetosonic (MS) waves generated by the pickup ions via a resonant cyclotron instability. The interaction of cometary ions in the mass loaded solar wind with MS waves propagating away from the comet and oblique to the interplanetary magnetic field (IMF) is investigated using the test particle approach. Ion trajectories, distribution functions, widths of pitch angle scattering and energy diffusion are obtained. We have also investigated the relationship between pitch angle scattering and the three parameters, namely, alpha, the angle between the solar wind flow direction and the ambient magnetic field, theta(sub BK), the angle between the ambient magnetic field and the wave propagation vector, and the ion injection velocity.

Srivastava, Krishna M.↗

Effect of Film-Hole Shape on Turbine Blade Film Cooling Performance

The detailed heat transfer coefficient and film cooling effectiveness distributions as well as tile detailed coolant jet temperature profiles on the suction side of a gas turbine blade A,ere measured using a transient liquid crystal image method and a traversing cold wire and a traversing thermocouple probe, respectively. The blade has only one row of film holes near the gill hole portion on the suction side of the blade. The hole geometries studied include standard cylindrical holes and holes with diffuser shaped exit portion (i.e. fanshaped holes and laidback fanshaped holes). Tests were performed on a five-blade linear cascade in a low-speed wind tunnel. The mainstream Reynolds number based on cascade exit velocity was 5.3 x 10(exp 5). Upstream unsteady wakes were simulated using a spoke-wheel type wake generator. The wake Strouhal number was kept at 0 or 0.1. Coolant blowing ratio was varied from 0.4 to 1.2. Results show that both expanded holes have significantly improved thermal protection over the surface downstream of the ejection location, particularly at high blowing ratios. However, the expanded hole injections induce earlier boundary layer transition to turbulence and enhance heat transfer coefficients at the latter part of the blade suction surface. In general, the unsteady wake tends to reduce film cooling effectiveness.

Han, J. C.↗

Detection of Objects Hidden in Highly Scattering Media Using Time-Gated Imaging Methods

Non-intrusive and non-invasive optical imaging techniques has generated great interest among researchers for their potential applications to biological study, device characterization, surface defect detection, and jet fuel dynamics. Non-linear optical parametric amplification gate (NLOPG) has been used to detect back-scattered images of objects hidden in diluted Intralipid solutions. To directly detect objects hidden in highly scattering media, the diffusive component of light needs to be sorted out from early arrived ballistic and snake photons. In an optical imaging system, images are collected in transmission or back-scattered geometry. The early arrival photons in the transmission approach, always carry the direct information of the hidden object embedded in the turbid medium. In the back-scattered approach, the result is not so forth coming. In the presence of a scattering host, the first arrival photons in back-scattered approach will be directly photons from the host material. In the presentation, NLOPG was applied to acquire time resolved back-scattered images under the phase matching condition. A time-gated amplified signal was obtained through this NLOPG process. The system's gain was approximately 100 times. The time-gate was achieved through phase matching condition where only coherent photons retain their phase. As a result, the diffusive photons, which were the primary contributor to the background, were removed. With a large dynamic range and high resolution, time-gated early light imaging has the potential for improving rocket/aircraft design by determining jets shape and particle sizes. Refinements to these techniques may enable drop size measurements in the highly scattering, optically dense region of multi-element rocket injectors. These types of measurements should greatly enhance the design of stable, and higher performing rocket engines.

Galland, Pierre A.↗

Characterization of the Reverberation Chamber at the NASA Langley Structural Acoustics Loads and Transmission (SALT) Facility

In 2011 the noise generating capabilities in the reverberation chamber of the Structural Acoustic Loads and Transmission (SALT) facility at NASA Langley Research Center were enhanced with two fiberglass reinforced polyester resin exponential horns, each coupled to Wyle Acoustic Source WAS-3000 airstream modulators. This report describes the characterization of the reverberation chamber in terms of the background noise, diffusivity, sound pressure levels, the reverberation times and the related overall acoustic absorption in the empty chamber and with the acoustic horn(s) installed. The frequency range of interest includes the 80 Hz to 8000 Hz one-third octave bands. Reverberation time and sound pressure level measurements were conducted and standard deviations from the mean were computed. It was concluded that a diffuse field could be produced above the Schroeder frequency in the 400 Hz one-third octave band and higher for all applications. This frequency could be lowered by installing panel diffusers or moving vanes to improve the acoustic modal overlap in the chamber. In the 80 Hz to 400 Hz one-third octave bands a successful measurement will be dependent on the type of measurement, the test configuration, the source and microphone locations and the desired accuracy. It is recommended that qualification measurements endorsed in the International Standards be conducted for each particular application.

Grosveld, Ferdinand W.↗

Dispersal of gases generated near a lunar outpost

The dispersal of gases evolved by prospective lunar base operations is presently modeled analytically using continuous (mining and habitat-venting) and impulsive (primarily rocket exhaust) injections of gases. In the case of impulsive injection, the neutral atmosphere and associated ionosphere both decay on time-scales of about 20 min; in that of continuous injection, the atmosphere near the base grows and achieves a steady state after about 20 min. Both direct and diffusive transport mechanisms are considered, and it is concluded that for the injection rates and assumptions presently employed the artificial lunar atmospheres produced are not significantly detrimental to astronomical observations and high-vacuum materials processing operations.

Burns, Jack O.↗