Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ferroelectrics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Oxygen vacancy-induced ferroelectric effect in (111) strontium titanate single crystals controls photoelectrochemical water oxidation

Ferroelectric materials, such as tetragonal BaTiO 3 , have a permanent electric polarization that can be controlled with an external electric field, however, a ferroelectric polarization in cubic SrTiO 3 is forbidden by the higher symmetry of the lattice. Here we demonstrate that hydrogen annealed SrTiO 3−x single crystals can be polarized electrically, and that the polarization controls the activity for photoelectrochemical water oxidation, a pathway to solar hydrogen fuel. Specifically, it is observed that the anodic water oxidation photocurrent increases from 0.99 to 2.22 mA cm −2 at 1.23 V RHE (60 mW cm −2 , UV illumination) or decreases to 0.50 mA cm −2 after electric polarization of hydrogen-annealed (111) SrTiO 3−x single crystals in forward or reverse direction. The polarization also modifies the surface photovoltage signal of the material and its flat band potential, based on Mott–Schottky measurements. These observations are attributed to the formation of an electric dipole at the (111) SrTiO 3−x surface, which alters the potential drop across the depletion layer at the solid–liquid junction, and with it the electron transfer barrier. Density functional theory calculations confirm that an electric dipole can result from the movement of oxygen vacancies between the surface or sub-surface layers of SrTiO 3−x . The filling of these surface oxygen vacancies is the probable cause for the observed disappearance of the electric polarization after 24 h storage in air and 48 h in argon. Overall, this work establishes a new surface-based ferroelectric effect in SrTiO 3−x and its use for solar energy conversion during photoelectrochemical water oxidation. Because oxygen vacancy defects are common, similar electric polarization effects are to be expected in other metal oxides.

Assavachin, Samutr [University of California, Davi↗

Nanoscale domain growth dynamics of ferroelectric poly(vinylidene fluoride-co-trifluoroethlene) thin films.

Nanoscale domain growth dynamics of ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) thin films were investigated by piezoresponse force microscopy. A 90 nm thick ferroelectric polymer thin films were fabricated on Au substrate by spin-coating method. The domain size of nanoscale dot pattern was linearly proportional to logarithmic value of the pulse width. However there was a significant asymmetry in nucleation and lateral domain growth depending on the voltage polarity, which implies the existence of the preferred polarization states. The obtained activation field indicates the nucleation-limited domain switching behaviors of ferroelectric polymer thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Proximity to a Ferroelectric Instability in Ba1-xCaxZrO3

The Ba1-xCaxZrO3 solid solution was investigated by structural and dielectric measurements on pulsed laser deposition grown films and by first principles calculations. Samples were synthesized on SrRuO3 coated SrTiO3 substrates for x between 0 and 0.44. The samples were found to be under mild compressive strain at least for low x. Dielectric measurements showed no evidence for ferroelectricity. First principles supercell calculations were performed as a function of lattice parameter. These calculations show ferroelectricity at expanded volume and a rapid suppression depending on cation ordering as the volume is reduced. Prospects for realizing ferroelectricity in BaZrO3 based perovskites are discussed in light of these results.

36 MATERIALS SCIENCE↗

Interfacial charge and strain effects on the ferroelectric behavior of epitaxial (001) PbTiO 3 films on (110) DyScO 3 substrates

In-situ synchrotron x-ray observations reveal that the ferroelectric behavior of epitaxial (001) PbTiO3 thin films grown on (110) DyScO3 substrates depends on both film thickness and interfacial electrical properties. A 92-nm-thick film was found to exhibit an a/c domain structure with a ferroelectric Curie temperature similar to that theoretically predicted based on the strain state. In contrast, 6-nm-thick films contained only c-oriented domains, and the ferroelectric behavior was found to depend strongly on the nature of the electrical boundary condition at the buried interface.

Highland, M. J.↗

Frequency-dependent ferroelectric behavior of BaMn3Ti4O14.25 at room temperature

We report the activation field and selective frequency-dependent ferroelectric behavior of BaMn3Ti4O14.25 (BMT-134) at room temperature. BMT-134, a recently discovered multiferroic complex oxide, exhibits antiferromagnetic and ferroelectric behavior and belongs to the hollandite crystal class. The microstructure can be manipulated through processing conditions to prepare a nanocrystalline textured tablet. We measured polarization-electric field (P-E) hysteresis loops and strain-electric field butterfly loops as a function of frequency in order to investigate the AC dynamics of domain switching and strain behavior. Under an electric field loading condition, a clear hysteresis loop of the electric field-displacement curve is obtained at 50 Hz, indicating that room temperature ferroelectricity is attainable under the right processing conditions. When the frequency is increased to 500 Hz, the coercive field also increases, until the frequency reaches 5 kHz, at which point the electric field versus electric displacement becomes linear indicating the limit of domain switching at high frequency.

Hossain, Muhammad E.↗

Effect of thickness on dielectric, ferroelectric, and optical properties of Ni substituted Pb(Zr 0.2 Ti 0.8 )O 3 thin films

We report thickness dependent dielectric, ferroelectric, and optical properties of Ni substituted Pb(Zr 0.2 Ti 0.8 )O 3 thin films. The Pb(Zr 0.2 Ti 0.8 ) 0.7 0Ni 0.30 O 3-δ (PZTNi30) thin films for various thicknesses, ranging from 5 nm to 400 nm, were fabricated by pulsed laser deposition technique. Giant dielectric dispersion, low dielectric loss, large dielectric constant ~1000–1500 from 100 Hz to 100 kHz, and diffused dielectric anomaly near 570–630 K were observed in PZTNi30 thin films. These films show well saturated ferroelectric hysteresis, with large remanent polarization. It also illustrated excellent optical transparency which decreased from 82 to 72% with increasing film thickness from 5 nm to 400 nm for the probe wavelengths ranging from 200 to 1100 nm. A decrease in direct bandgap (Eg) values from 4 eV to 3.4 eV and indirect-E g values from 3.5 eV to 2.9 eV were observed for PZTNi30 thin films with increase in film thickness from 5 nm to 400 nm, respectively. The direct and indirect bandgaps were discussed in context of film thickness and grain size effects. Our investigations on optical properties of PZTNi30 thin films suggest that bandgap can be modified as a function of film thickness which may be useful for readers working to develop novel candidates for ferroelectric photovoltaic.

36 MATERIALS SCIENCE↗

High ferroelectric polarization in c-oriented BaTiO 3 epitaxial thin films on SrTiO 3 /Si(001)

The integration of epitaxial BaTiO 3 films on silicon, combining c-orientation, surface flatness, and high ferroelectric polarization is of main interest towards its use in memory devices. This combination of properties has been only achieved so far by using yttria-stabilized zirconia buffer layers. Here, the all-perovskite BaTiO 3 /LaNiO 3 /SrTiO 3 heterostructure is grown monolithically on Si(001). The BaTiO 3 films are epitaxial and c-oriented and present low surface roughness and high remnant ferroelectric polarization around 6 μC/cm 2 . Lastly, this result paves the way towards the fabrication of lead-free BaTiO 3 ferroelectric memories on silicon platforms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon localization transition in relaxor ferroelectric PZN-5%PT

Relaxor ferroelectric behavior occurs in many disordered ferroelectric materials but is not well understood at the atomic level. Recent experiments and theoretical arguments indicate that Anderson localization of phonons instigates relaxor behavior by driving the formation of polar nanoregions (PNRs). Here, we use inelastic neutron scattering to observe phonon localization in relaxor ferroelectric PZN-5%PT (0.95[Pb(Zn 1/3 Nb 2/3 )O 3 ]–0.05PbTiO 3 ) and detect additional features of the localization process. In the lead, up to phonon localization on cooling, the local resonant modes that drive phonon localization increase in number. The increase in resonant scattering centers is attributed to a known increase in the number of locally off centered Pb atoms on cooling. The transition to phonon localization occurs when these random scattering centers increase to a concentration where the Ioffe-Regel criterion is satisfied for localizing the phonon. Finally, we also model the effects of damped mode coupling on the observed phonons and phonon localization structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromechanical control of polarization vortex ordering in an interacting ferroelectric-dielectric composite dimer

Using a free-energy based computational model, we have investigated the response of a system comprising two interacting ferroelectric nanospheres, embedded in a dielectric medium, to a static external electric field. The system response is hysteretic and tunable by changing the inter-particle distance and the orientation of the applied field, which strongly modulates the field-driven long-range elastic interactions between the particles that propagate through the dielectric matrix. At small separations, the sensitivity of the system behavior with respect to the electric field direction originates from drastically different configurations of the local vortex-like polarization states in ferroelectric particles. In conclusion, this suggests new routes for the design of composite metamaterials whose dielectric properties can be controlled and tuned by selecting the mutual arrangement of their ferroelectric components.

36 MATERIALS SCIENCE↗

Ferroelectrics and photovoltaics in endohedral fullerenes-based van der Waals heterostructures

Using the density functional theory calculations, we studied the ferroelectric, electronic, and optical properties of a series of bias-controllable endohedral fullerene molecules (TM@C28, TM = Ti-Ni). One important finding is that Cr@C28 has a large electric dipole moment and an appropriate bandgap (∼1.2 eV). By sandwiching Cr@C28 molecules between two graphene or transition metal dichalcogenide layers, the heterostructures may combine strong ferroelectricity and excellent optical properties. This paves the way for the development of two-dimensional van der Waals ferroelectric-photovoltaic materials.

Li, Jie (ORCID:0000000237334587)↗

Oxygen vacancy contributions to the electrical stress response and endurance of ferroelectric hafnium zirconium oxide thin films

Despite its scalability and CMOS process compatibility, the limited endurance and sub-optimal stress response of ferroelectric Zr-substituted hafnia [(Hf,Zr)O 2 ] have been one of the key impediments toward its integration into practical device and technology applications. Here, using electrical measurements complemented by photoluminescence spectroscopy, we investigate the underlying mechanisms behind this behavior in 10 nm thick W/Hf 0.5 Zr 0.5 O 2 /W capacitors. Analyzing the evolution of leakage current with stress cycles and the spectroscopic response of the stress-induced leakage current, we attribute the behavior to defect levels, which lie at 0.6 eV from the conduction band edge of the ferroelectric. Photoluminescence spectroscopy, in turn, further corroborates the defect level's position within the bandgap while enabling its attribution to the presence of oxygen vacancies. Furthermore, this work helps to identify oxygen vacancies as the key factor responsible for the degraded endurance and stress response in (Hf,Zr)O 2 and subsequently motivates the exploration of methods to reduce the oxygen vacancy concentrations without destabilizing the ferroelectric orthorhombic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferroelectric Al1 − xBxN thin films integrated on Si

Ferroelectric Al0.93B0.07N thin films are prepared (100) Si substrates. The necessary c-axis out-of-plane orientation to observe macroscopic ferroelectric switching was achieved by implementing an initial Ar/N2 plasma treatment, followed by a thin layer of AlN to initiate the desired texture and a 150 nm W layer. The plasma treatment facilitates crystallinity enhancement of the AlN template layer, allowing for subsequent growth of highly oriented W and Al0.93B0.07N layers. The W layer exhibits random in-plane orientation and exclusive (110) out-of-plane orientation with a rocking curve width of 1.4°. When grown on these W surfaces, 175 nm thick Al0.93B0.07N films exhibit random in-plane orientation and exclusive (001) texture with rocking curve full-width-half-max values of 1.6° and RMS roughness values less than 1 nm. Polarization hysteresis measurements show robust hysteresis with coercive field values of 5.4 MV/cm and remanent polarization values of 136 μC/cm2. XPS depth profile analysis suggests that the plasma treatment converts the existing native oxide to a nitrogen rich oxynitride with approximate composition Si3O0.5N3.67. Cross-sectional TEM reveals that the oxynitride interlayer is amorphous and ∼3.4 nm thick, more than double the native oxide thickness measured by multiwavelength ellipsometry, implying that (oxy)nitride growth continues after conversion of the native oxide. This new family of ferroelectric wurtzites is interesting from an integration perspective given their chemical compatibility with mainstream semiconductors. Developing synthesis routes that promote needed texture while preserving compatible processing windows is an important step toward practical integration.

Physics↗

Strain effects on stability of topological ferroelectric polar configurations in (PbTiO3) n /(SrTiO3) n superlattices

The (PbTiO3)n/(SrTiO3)n (PTO/STO) superlattice system has been shown to exhibit interesting topological phases (e.g., vortices and skyrmions) in addition to normal ferroelectric domain states. Existing studies are mostly focused on the dependence of topological polar distributions and properties of PTO/STO superlattice on its periodicity. Here, we study the strain effect on the topological phase transitions and ferroelectric domain structures employing phase-field simulations. We summarized in an isotropic strain (in-plane misfit strain along the x direction is equal to that along the y direction) periodicity phase diagram displaying the stability regions of different polar topological states, including normal ferroelectric twins, vortices, skyrmions, and mixtures of vortices and twins. We also analyzed the polarization configurations under anisotropic in-plane strains (in-plane misfit strain along the x direction is not equal to that along the y direction) and demonstrated that the strain anisotropy can be used to tune the directions of vortex arrays along either the [100] pc or [010] pc directions or labyrinth vortex arrays. This work offers guidance to manipulating polar structures in the PTO/STO superlattices via strain engineering.

Physics↗

Perspectives and progress on wurtzite ferroelectrics: Synthesis, characterization, theory, and device applications

Wurtzite ferroelectrics are an emerging material class that expands the functionality and application space of wide bandgap semiconductors. Promising physical properties of binary wurtzite semiconductors include a large, reorientable spontaneous polarization, direct band gaps that span from the infrared to ultraviolet, large thermal conductivities and acoustic wave velocities, high mobility electron and hole channels, and low optical losses. The ability to reverse the polarization in ternary wurtzite semiconductors at room temperature enables memory and analog type functionality and quasi-phase matching in optical devices and boosts the ecosystem of wurtzite semiconductors, provided the appropriate combination of properties can be achieved for any given application. In this article, advances in the design, synthesis, and characterization of wurtzite ferroelectric materials and devices are discussed. Highlights include: the direct and quantitative observation of polarization reversal of ~135 μC/cm 2 charge in Al 1-x B x N via electron microscopy, Al 1-x B x N ferroelectric domain patterns poled down to 400 nm in width via scanning probe microscopy, and full polarization retention after over 1000 h of 200 °C baking and a 2× enhancement relative to ZnO in the nonlinear optical response of Zn 1-x Mg x O. In conclusion, the main tradeoffs, challenges, and opportunities in thin film deposition, heterostructure design and characterization, and device fabrication are overviewed.

30 DIRECT ENERGY CONVERSION↗

Modulation of oxygen vacancies assisted ferroelectric and photovoltaic properties of (Nd, V) co-doped BiFeO 3 thin films

We are reporting on the improved ferroelectric and photovoltaic properties of (Nd3+, V5+) co-doped (Bi0.95Nd0.05)(Fe-1 V-x(x))O-3 (BNFVO) (x = 0.01, 0.03) thin films grown by PLD. BNFVO thin films showed reduced leakage current, lower optical bandgap, and improved ferroelectricity compared to BFO films, which can be explained by valance change and extinguishing oxygen vacancies due to the doping effect. Piezoresponse force microscopy measurements showed an improved domain back switching in doped thin films indicating that the suppression of oxygen vacancies offset the effect of polarization flipping caused by doping. Further, we found a relatively stable and enhanced photovoltaic effect in BNFVO films with an order of magnitude higher photocurrent and almost doubled photovoltage in comparison to BFO films, which can be explained by less recombination between hopping electrons and oxygen vacancies. Our results demonstrate the significance of dopant selection to suppress the oxygen vacancies for improved ferroelectric and photovoltaic properties of BFO films.

Agarwal, Radhe (ORCID:0000000289449423)↗

Symmetry degeneration and room temperature ferroelectricity in ion-irradiated SrTiO 3

Polar phonon modes associated with room temperature ferroelectricity are observed in SrTiO 3 single crystals irradiated with Ti ions. Quantitative strain analysis reveals that irradiation-induced out-of-plane strain drives the centrosymmetric cubic SrTiO 3 to a tetragonal-like structure in the maximum damaged region. Energy transfer from ions to electrons during ion irradiation yields defects in SrTiO 3 that also plays an important role for the room temperature ferroelectricity. Different from thin film techniques, the ferroelectricity in the ion irradiated SrTiO 3 can occur for much larger thicknesses, depending on the energy and type of ion.

36 MATERIALS SCIENCE↗

Conceptual design of a high reactive-power ferroelectric fast reactive tuner

We present a novel design of a ferroelectric fast reactive tuner (FE-FRT) capable of modulating mega-VAR reactive power on a submicrosecond timescale. The high reactive power capability of our design extends the range of applications of reactive tuners to numerous applications. We present a detailed analytical model of the performance of a megawatt-class reactive power device and benchmark it against finite-element method eigenmode and frequency domain electromagnetic simulations. We introduce new features, including an annulus design for the ferroelectric capacitors and capacitive window coupling to the cavity. We consider thermal design issues and nonlinear effects in the ferroelectric. The model covers several configurations, allowing control of the frequency of superconducting and normal-conducting cavities in a variety of applications and frequencies. We calculate that the FE-FRT designed should be capable of handling around 0.45 MVAR of reactive power with around 3 kW of resistive losses, providing a frequency tuning range of 8 kHz in an example of 400 MHz cavity geometry. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

p - n Junction Dynamics Induced in a Graphene Channel by Ferroelectric-Domain Motion in the Substrate

The p - n junction dynamics induced in a graphene channel by stripe-domain nucleation, motion, and reversal in a ferroelectric substrate is explored using a self-consistent approach based on Landau-Ginzburg-Devonshire phenomenology combined with classical electrostatics. Relatively low gate voltages are required to induce the hysteresis of ferroelectric polarization and graphene charge in response to the periodic gate voltage. Pronounced nonlinear hysteresis of graphene conductance with a wide memory window corresponds to high amplitudes of gate voltage. Also, we reveal the extrinsic size effect in the dependence of the graphene-channel conductivity on its length. We predict that the top-gate–dielectric-layer–graphene-channel–ferroelectric-substrate nanostructure considered here can be a promising candidate for the fabrication of the next generation of modulators and rectifiers based on the graphene p - n junctions.

36 MATERIALS SCIENCE↗