Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extended structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

IRAS observations of the exciting stars of Herbig-Haro objects

A list of the exciting stars of Herbig-Haro (HH) objects that have been detected by IRAS is presented. A critical comparison between IRAS and airborne observations clearly indicates that there are spatially extended far-infrared emitting structures associated with these HH-exciting stars. Estimates of bolometric luminosities from the IRAS measurements that show a range from 0.05 to almost 800 solar luminosities for 25 of these stars are derived. This range is not in conflict with the hypothesis that the onset of deuterium-burning terminates low-mass protostellar accretion and that the HH objects are generated at that time. The extended emission zones are identified with the infalling envelopes of these protostars.

Cohen, Martin↗

The Jovian magnetotail and its current sheet

Analyses of Voyager magnetic field measurements have extended the understanding of the structural and temporal characteristics of Jupiter's magnetic tail. The magnitude of the magnetic field in the lobes of the tail is found to decrease with Jovicentric distance approximately as r to he-1.4, compared with the power law exponent of -1.7 found for the rate of decrease along the Pioneer 10 outbound trajectory. Voyager observations of magnetic field component variations with Jovicentric distance in the tail do not support the uniform radial plasma outflow model derived from Pioneer data. Voyager 2 has shown that the azimuthal current sheet which surrounds Jupiter in the inner and middle magnetosphere extends tailward (in the anti-Sun direction) to a distance of at least 100 R sub J. In the tail this current sheet consists of a plasma sheet and embedded neutral sheet. In the region of the tail where the sheet is observed, the variation of the magnetic field as a result of the sheet structure and its 10 hr periodic motion is the dominant variation seen.

Behannon, K. W.↗

Local atomic structure and Ni nanophase segregation in Zn 1-x Ni x S thin films

Here, the local atomic structure of Zn 1-x Ni x S thin films was investigated using X-ray absorption spectroscopy. The films were grown using RF-sputtering at atomic concentrations x = 0.00, x = 0.04, x = 0.08 and x = 0.14. X-ray diffraction shows that the lattice parameter contracts with increasing Ni concentration, consistent with the smaller atomic radii of Ni compared to that one of Zn. Optical absorption reveals a reduction of the bandgap as Ni concentration increases, except for sample x = 0.14 where a complex behavior is observed. Results from X-ray absorption near edge structure (XANES) spectroscopy indicate a shift in the valence state of Ni for the x = 0.14 sample. The analysis of the extended X-ray absorption fine structure (EXAFS) spectra indicate a contraction of ~0.7 Å in the Ni–S bond distance when compared to the Zn–S bond length, which generates local lattice distortions and an increment of the static disorder as the Ni concentration increases. The EXAFS results for sample x = 0.14 show the presence of a Zn 1-x Ni x S phase and a nanoscopic metallic Ni phase with domain sizes below the diffraction limit. These results reveal that the local atomic structure differs in a significant manner from the average crystalline structure, implying its importance for the determination of the electronic properties of this material.

36 MATERIALS SCIENCE↗

Towards quantifying the impact of triaxiality on optical signatures of galaxy clusters: weak lensing and galaxy distributions

ABSTRACT We present observational evidence of the impact of triaxiality on radial profiles that extend to 40 Mpc from galaxy cluster centres in optical measurements. We perform a stacked profile analysis from a sample of thousands of nearly relaxed galaxy clusters from public data releases of the Dark Energy Survey and the Dark Energy Camera Legacy Survey. Using the central galaxy elliptical orientation angle as a proxy for galaxy cluster orientation, we measure cluster weak lensing and excess galaxy density axis-aligned profiles, extracted along the central galaxy’s major or minor axes on the plane of the sky. Our measurements show a ≳ 2σ–3σ difference per radial bin between the normalized axis-aligned profiles. The profile difference between each axis-aligned profile and the azimuthally averaged profile ($\sim \pm 10\,\rm per\ cent-20~{{\ \rm per\ cent}}$ along major/minor axis) appears inside the clusters (∼0.4 Mpc) and extends to the large-scale structure regime (∼10–20 Mpc). The magnitude of the difference appears to be relatively insensitive to cluster richness and redshift, and extends further out in the weak lensing surface mass density than in the galaxy overdensity. Looking forward, this measurement can easily be applied to other observational or simulation data sets and can inform the systematics in cluster mass modelling related to triaxiality. We expect imminent upcoming wide-area deep surveys, such as the Vera C. Rubin Observatory’s Legacy Survey of Space and Time, to improve our quantification of optical signatures of cluster triaxiality.

79 ASTRONOMY AND ASTROPHYSICS↗

Reconfigurable Grating Diffraction Structural Color in Self-Assembled Colloidal Crystals

Self-assembled colloidal crystals display structural colors due to light diffracted from their microscale, ordered structure. This color arises due to Bragg reflection (BR) or grating diffraction (GD); the latter mechanism is much less explored than the former. Here the design space for generating GD structural color is identified and its relative advantages are demonstrated. Electrophoretic deposition is used to self-assemble crystals with fine crystal grains from colloids of diameter 1.0 µm. The structural color in transmission is tunable across the full visible spectrum. The optimum optical response—represented by both color intensity and saturation—is observed at low layer number (≤5 layers). The spectral response is well predicted by Mie scattering of the crystals. Taken together, the experimental and theoretical results demonstrate that vivid grating colors with high color saturation can be produced from thin layers of micron-sized colloids. These colloidal crystals extend the potential of artificial structural color materials.

42 ENGINEERING↗

Mobile remote manipulator vehicle system

A mobile remote manipulator system is disclosed for assembly, repair and logistics transport on, around and about a space station square bay truss structure. The vehicle is supported by a square track arrangement supported by guide pins integral with the space station truss structure and located at each truss node. Propulsion is provided by a central push-pull drive mechanism that extends out from the vehicle one full structural bay over the truss and locks drive rods into the guide pins. The draw bar is now retracted and the mobile remote manipulator system is pulled onto the next adjacent structural bay. Thus, translation of the vehicle is inchworm style. The drive bar can be locked onto two guide pins while the extendable draw bar is within the vehicle and then push the vehicle away one bay providing bidirectional push-pull drive. The track switches allow the vehicle to travel in two orthogonal directions over the truss structure which coupled with the bidirectional drive, allow movement in four directions on one plane. The top layer of this trilayered vehicle is a logistics platform. This platform is capable of 369 degees of rotation and will have two astronaut foot restraint platforms and a space crane integral.

Bush, Harold G.↗

The age–chemical abundance structure of the Galactic disc – II. α -dichotomy and thick disc formation

ABSTRACT We extend our previous work on the age–chemical abundance structure of the Galactic outer disc to the inner disc (4 < r < 8 kpc) based on the SDSS/APOGEE survey. Different from the outer disc, the inner disc stars exhibit a clear bimodal distribution in the [Mg/Fe]–[Fe/H] plane. While a number of scenarios have been proposed in the literature, it remains challenging to recover this bimodal distribution with theoretical models. To this end, we present a chemical evolution model embedding a complex multiphase inner disc formation scenario that matches the observed bimodal [Mg/Fe]–[Fe/H] distribution. In this scenario, the formation of the inner disc is dominated by two main starburst episodes $6\,$Gyr apart with secular, low-level star formation activity in between. In our model, the first starburst occurs at early cosmic times ($t\sim 1\,$ Gyr) and the second one $6\,$ Gyr later at a cosmic time of $t\sim 7\,$ Gyr. Both these starburst episodes are associated with gas accretion events in our model, and are quenched rapidly. The first starburst leads to the formation of the high-α sequence, and the second starburst leads to the formation of the metal-poor low-α sequence. The metal-rich low-α stars, instead, form during the secular evolution phase between the two bursts. Our model shows that the α-dichotomy originates from the rapid suppression of star formation after the first starburst. The two starburst episodes are likely to be responsible for the formation of the geometric thick disc (z >1 kpc), with the old inner thick disc and the young outer thick disc forming during the first and the second starbursts, respectively.

Lian, Jianhui↗

Structural stereopsis - Potential for automatic stereo camera calibration

The paper describes the use of extended edge features as a source of primitives for structural stereopsis and considers the design of a system for autonomous camera calibration. It is shown that the structural approach permits greater use of spatial relational constraints, eliminating the coarse-to-fine tracking of point-based algorithms. Experimental results concerning matching and calibration on real images using Laplacian-of-Gaussian contour fragments as primitives in structural stereopsis are presented, and results in graph-theoretic representation and inexact matches, analytical photogrammetry, and other computer vision and image analysis problem domains are examined. Such a system might be used in aerial photogrammetry and cartography, and robotic vision systems; however, the system is still very much under development.

Boyer, Kim L.↗

Development and Validation of Resistance-Capacitance Model (RCM) for Phase Change Material (PCM) Embedded in 3D Periodic Structures

The low thermal conductivity of Phase Change Materials (PCM) can be improved with extended surfaces such as additively manufactured 3D periodic lattice structures. Three different aluminum alloy-based lattices (base sizes 10, 20, and 40 mm) with average porosity of 0.95 filled with paraffin wax, with a nominal phase change temperature of 55°C, were experimentally investigated. In this work, a computationally efficient 2D Resistance Capacitance-based model (RCM) was developed for predicting the thermal characteristics of these geometries. Non-uniform porosity in the PCM-metal domain was estimated using image processing and served as model input. The solver does not solve for higher-order physics as in CFD but still can provide a good prediction of thermal resistance and energy storage at a very low computational cost. The simulation-to-real-time factor for this geometry is of the order of 10-4, while CFD simulations typically have a real-time factor greater than 1. The model was validated against the experimental data for melting under three different heat fluxes (6250 W/m2, 12500 W/m2, and 18750 W/m2). The mean deviation of the predicted average PCM temperature was between 1.34 K-2.81 K for different cases. The maximum average temperature deviation of 5.45 K was observed for the 20 mm geometry at the highest heat flux test condition. The effects of natural convection were neglected in the model, but the predicted PCM temperature and energy storage still showed good agreement with the experimental data.

25 ENERGY STORAGE↗

A coronal hole and its identification as the source of a high velocity solar wind stream

X-ray images of the solar corona showed a magnetically open structure in the low corona which extended from N20W20 to the south pole. Analysis of the measured X-ray intensities shows the density scale heights within the structure to be typically a factor of two less than that in the surrounding large scale magnetically closed regions. The structure is identified as a coronal hole. Wind measurements for the appropriate period were traced back to the sun by the method of instantaneous ideal spirals. A striking agreement was found between the Carrington longitude of the solar source of a recurrent high velocity solar wind stream and the position of the hole.

Krieger, A. S.↗

Kuramoto synchronization of quantum tunneling polarons for describing the dynamic structure in cuprate superconductors

A major open topic in cuprates is the interplay between the lattice and electronic dynamics and the importance of their coupling to the mechanism of high-temperature superconductivity (HTSC). As evidenced by extended x-ray absorption fine structure (EXAFS) experiments, anharmonic structural effects are correlated with the charge dynamics and the transition to a superconducting phase in different HTSC compounds. Here, in this paper, we describe how structural anharmonic effects can be coupled to electronic and lattice dynamics in cuprate systems by performing the exact diagonalization of a prototype anharmonic many-body Hamiltonian on a relevant 6-atom cluster and show that the EXAFS results can be understood as a Kuramoto synchronization transition between coupled internal quantum tunneling of polarons associated with the two-site distribution of the copper–apical oxygen (Cu-O ap ) pair in the dynamic structure. The transition is driven by the anharmonicity of the lattice vibrations and promotes the pumping of charge, initially stored at the apical oxygen reservoirs, into the copper-oxide plane. Simultaneously, a finite projection of the internal quantum tunneling polaron extends to the copper–planar oxygen (Cu-O pl ) pair. All these findings allow an interpretation based on an effective quantum-mechanical triple-well potential associated with the oxygen sites of the 6-atom cluster, which accurately represents the phase synchronization of apical oxygens and lattice-assisted charge transfer to the CuO 2 plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CoEx Electrode Structuring for High Energy and Fast Charging Lithium-Ion Batteries

This project was a collaboration between SRI International (SRI) and Oak Ridge National Laboratory (ORNL) focused on advancing SRI’s CoEx technology for printing of battery electrodes with structured porosity, specifically for improving fast charging performance. Prior work funded by the Vehicle Technologies Office (VTO) served as proof-of-concept for CoEx printing, with the scope limited to demonstrating that CoEx structuring in the cathode would improve discharge performance. In that work, a thick cathode was paired with an anode produced through conventional means (i.e. it had no structuring), and the baseline comparison was a cell with conventionally produced cathode and anode of similar loading, along with a lower loaded cell that was intended to represent cells of typical loading. The result of that work showed that the CoEx cells had higher energy density than the thin baseline cells, due to the thicker electrode layers, and had much higher power density than the thick baseline cells at higher discharge rates, because the CoEx cathode had higher performance than the conventional cathode. In this project, we proposed to extend the CoEx technology to structure both the anode and cathode of a lithium ion battery, resulting in at least a 20% increase in energy density under fast charging conditions, while reducing costs by 15% and cutting energy usage during production.

25 ENERGY STORAGE↗

Unravelling Magnetic Nanochain Formation in Dispersion for In Vivo Applications

Self-assembly of iron oxide nanoparticles (IONPs) into 1D chains is appealing, because of their biocompatibility and higher mobility compared to 2D/3D assemblies while traversing the circulatory passages and blood vessels for in vivo biomedical applications. In this work, parameters such as size, concentration, composition, and magnetic field, responsible for chain formation of IONPs in a dispersion as opposed to spatially confining substrates, are examined. In particular, the monodisperse 27 nm IONPs synthesized by an extended LaMer mechanism are shown to form chains at 4 mT, which are lengthened with applied field reaching 270 nm at 2.2 T. The chain lengths are completely reversible in field. Using a combination of scattering methods and reverse Monte Carlo simulations the formation of chains is directly visualized. The visualization of real-space IONPs assemblies formed in dispersions presents a novel tool for biomedical researchers. This allows for rapid exploration of the behavior of IONPs in solution in a broad parameter space and unambiguous extraction of the parameters of the equilibrium structures. Additionally, it can be extended to study novel assemblies formed by more complex geometries of IONPs.

36 MATERIALS SCIENCE↗

Magnetic shaping of planetary nebulae and other stellar wind bubbles

As in the case of the solar wind, the magnetic field in the wind from a magnetized, rotating star becomes increasingly toroidal with distance from the star. The strength of the magnetic field can be characterized by sigma, the ratio of toroidal magnetic energy density to kinetic energy density in the equatorial plane of the wind. A fast wind shocks against the external medium and creates a bubble whose volume is dominated by shocked gas. The toroidal magnetic field increases in the shocked bubble and can dominate the thermal pressure. Because of the low velocities in the bubble, hydrostatic equilibrium is a good approximation and allows the calculation of the thermal and magnetic pressure in the bubble, as in the model of Begelman and Li (1992) for the Crab Nebula. The structure, which is axisymmetric and extended in the polar direction, depends on two parameters: sigma nu(sub w)/w(sub 0), where nu(sub w) is the wind velocity and w(sub 0) is the shell velocity in the polar direction, and lambda = nu(sub a)/w(sub 0), where nu(sub a) is the velocity of the slow wind. For small values of lambda, there is a cusp in the shell in the equatorial plane, i.e., there is an equatorial ring. For larger values of lambda, the maximum of the surface density moves away from the equator i.e., a double ring structure. Our models should apply to planetary nebulae, if their central stars are sufficiently magnetized; the calculated shapes do resemble the observed shapes of planetaries. In all cases, our model predicts that X-ray emission from the bubble is concentrated toward the polar axis. Finally, we briefly discuss the asymmetry of the Crab Nebula and 3C 58.

Chevalier, Roger A.↗

The Imagery of Sound

Automated Analysis Corporation's COMET is a suite of acoustic analysis software for advanced noise prediction. It analyzes the origin, radiation, and scattering of noise, and supplies information on how to achieve noise reduction and improve sound characteristics. COMET's Structural Acoustic Foam Engineering (SAFE) module extends the sound field analysis capability of foam and other materials. SAFE shows how noise travels while airborne, how it travels within a structure, and how these media interact to affect other aspects of the transmission of noise. The COMET software reduces design time and expense while optimizing a final product's acoustical performance. COMET was developed through SBIR funding and Langley Research Center for Automated Analysis Corporation.

Source record↗

Extended atmospheres of outer planet satellites and comets

In the third year of this 3-year project, research accomplishments are discussed and related to the overall objective. In the area of the distribution of hydrogen in the Saturn system, new Voyager UVS data have been discovered and are discussed. The data suggest that both Titan's hydrogen torus and Saturn's hydrogen corona play a major role in the circumplanetary gas source. Modeling analysis of this new data establishes a strong basis for continuing studies to be undertaken in a new NASA-sponsored project. In the area of the cometary atmospheres, observational data for H, O, C, and OH acquired with the Pioneer Venus Orbiter are evaluated and preliminary modeling analysis for some of the hydrogen Lyman-alpha data is presented. In addition, the importance of collisional thermalization in spatial properties and structure of the inner and extended comae of comets has been demonstrated using the recently developed particle trajectory model. The successful simulation by this model of the hydrogen Lyman-alpha image for Comet Kohoutec near perihelion, an extreme case for collisional thermalization, is particularly noteworthy.

Smyth, William H.↗

Synthesis pathways to thin films of stable layered nitrides

Controlled synthesis of metastable materials away from equilibrium is of interest in materials chemistry. Thin-film deposition methods with rapid condensation of vapour precursors can readily synthesize metastable phases but often struggle to yield the thermodynamic ground state. Growing thermodynamically stable structures using kinetically limited synthesis methods is important for practical applications in electronics and energy conversion. Here, in this study, we reveal a synthesis pathway to thermodynamically stable, ordered layered ternary nitride materials, and discuss why disordered metastable intermediate phases tend to form. We show that starting from elemental vapour precursors leads to a 3D long-range-disordered MgMoN 2 thin-film metastable intermediate structure, with a layered short-range order that has a low-energy transformation barrier to the layered 2D-like stable structure. This synthesis approach is extended to ScTaN 2 , MgWN 2 and MgTa 2 N 3 , and may lead to the synthesis of other layered nitride thin films with unique semiconducting and quantum properties.

36 MATERIALS SCIENCE↗

Accurate Modeling of Bromide and Iodide Hydration with Data-Driven Many-Body Potentials

Ion–water interactions play a central role in determining the properties of aqueous systems in a wide range of environments. However, a quantitative understanding of how the hydration properties of ions evolve from small aqueous clusters to bulk solutions and interfaces remains elusive. Here, we introduce the second generation of data-driven many-body energy (MBnrg) potential energy functions (PEFs) representing bromide–water and iodide–water interactions. The MB-nrg PEFs use permutationally invariant polynomials to reproduce two-body and three-body energies calculated at the coupled cluster level of theory, and implicitly represent all higher-body energies using classical many-body polarization. Further, a systematic analysis of the hydration structure of small Br - (H 2 O) n and I - (H 2 O) n clusters demonstrates that the MBnrg PEFs predict interaction energies in quantitative agreement with “gold standard” coupled cluster reference values. Importantly, when used in molecular dynamics simulations carried out in the isothermal-isobaric ensemble for single bromide and iodide ions in liquid water, the MB-nrg PEFs predict extended X-ray absorption fine structure (EXAFS) spectra that accurately reproduce the experimental spectra, which thus allows for characterizing the hydration structure of the two ions with high level of confidence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗