Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Impact of baryonic processes on weak-lensing cosmology: Power spectrum, nonlocal statistics, and parameter bias

We study the impact of baryonic physics on cosmological parameter estimation with weak-lensing surveys. We run a set of cosmological hydrodynamics simulations with different galaxy formation models. We then perform ray-tracing simulations through the total matter density field to generate 100 independent convergence maps with a field of view of 25 deg{sup 2}, and we use them to examine the ability of the following three lensing statistics as cosmological probes: power spectrum (PS), peak counts, and Minkowski functionals (MFs). For the upcoming wide-field observations, such as the Subaru Hyper Suprime-Cam (HSC) survey with a sky coverage of 1400 deg{sup 2}, these three statistics provide tight constraints on the matter density, density fluctuation amplitude, and dark energy equation of state, but parameter bias is induced by baryonic processes such as gas cooling and stellar feedback. When we use PS, peak counts, and MFs, the magnitude of relative bias in the dark energy equation of state parameter w is at a level of, respectively, δw∼0.017, 0.061, and 0.0011. For the HSC survey, these values are smaller than the statistical errors estimated from Fisher analysis. The bias could be significant when the statistical errors become small in future observations with a much larger survey area. We find that the bias is induced in different directions in the parameter space depending on the statistics employed. While the two-point statistic, i.e., PS, yields robust results against baryonic effects, the overall constraining power is weak compared with peak counts and MFs. On the other hand, using one of peak counts or MFs, or combined analysis with multiple statistics, results in a biased parameter estimate. The bias can be as large as 1σ for the HSC survey and will be more significant for upcoming wider-area surveys. We suggest to use an optimized combination so that the baryonic effects on parameter estimation are mitigated. Such a “calibrated” combination can place stringent and robust constraints on cosmological parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Validation for the Tropical Rainfall Measuring Mission: Lessons Learned and Future Plans

The Tropical Rainfall Measuring Mission (TRMM) was launched in November 1997 and is a highly regarded and successful mission. A major component of the TRMM program was its Ground Validation (GV) program. Through dedicated research and hard work by many groups, both the GV and satellite-retrieved rain estimates have shown a convergence at key GV sites, lending credibility to the global TRMM estimates. To be sure, there are some regional differences between the various satellite estimates themselves, which still need to be addressed; however, it can be said with some certainty that TRMM has provided a high-quality, long-term climatological data set for researchers that provides errors on the order of 10-20%, rather than pre-TRMM era error estimates on the order of 50-100%. The TRMM GV program's main operational task is to provide rainfall products for four sites: Darwin, Australia (DARW); Houston, Texas (HSTN); Kwajalein, Republic of the Marshall Islands (KWAJ); and, Melbourne, Florida (MELB). A comparison between TRMM Ground Validation (Version 5) and Satellite (Version 6) rain intensity estimates is presented. The gridded satellite product (3668) will be compared to GV Level II rain-intensity and -type maps (2A53 and 2A54, respectively). The 3G68 product represents a 0.5 deg x 0.5 deg data grid providing estimates of rain intensities from the TRMM Precipitation Radar (PR), Microwave Imager (TMI) and Combined (COM) algorithms. The comparisons will be sub-setted according to geographical type (land, coast and ocean). The convergence of the GV and satellite estimates bodes well for expectations for the proposed Global Precipitation Measurement (GPM) program and this study and others are being leveraged towards planning GV goals for GPM. A discussion of lessons learned and future plans for TRMM GV in planning for GPM will also be provided.

Wolff, David B.↗

Optimizing Long-term Monitoring of Radiation Air Dose Rates - 19169

Radiation air dose rates near the Fukushima Daiichi Nuclear Power Plant (NPP) have been steadily decreasing over the past seven years since the accident in March 2011. After seven years, the radiation monitoring program is expected to transition from short-term emergency responses to long-term monitoring. The objectives of long-term monitoring are often different from early emergency responses, since extensive data accumulation has led to an understanding of contaminant distributions and mobility. The main long-term monitoring objectives are (1) to confirm system stability and the continuing reduction of contaminant and hazard levels, (2) to provide assurance for the public, (3) to accumulate the basic datasets for scientific knowledge and future preparation, and (4) to detect changes or anomalies in contaminant mobility (if they occur), or any unexpected processes or events. In this work, we have developed a methodology for optimizing the sampling locations of radiation air dose-rate monitoring. Three steps are taken in order to determine sampling locations in a systematic manner: (1) prioritizing the critical locations, such as schools or regulatory requirement locations, (2) diversifying locations across the key environmental controls that are known to influence contaminant mobility and distributions, and (3) capturing the heterogeneity of radiation air dose rates across the domain. In the second step, we use a Gaussian mixture model to identify the representative locations in multiple environmental variables, such as elevation and land-cover types. In the third step, we use a Gaussian process model to capture and estimate the heterogeneity of air dose rates across the domain. We use the integrated dose-rate map from the Bayesian geostatistical method as the reference map and distribute the sampling in such a way as to capture the heterogeneity of the reference map. Although we assume hypothetical sets of measurement locations to evaluate the performance of the methodology and algorithms, we have demonstrated this approach using real, spatially extensive datasets, including the integrated air-dose-rate map of 2016. Our results have shown that this approach allows us to add sampling locations in a systematic manner. Increasing the number of sampling locations can better capture the heterogeneity of dose rates, although the estimation error does not decrease further after a certain number of samples. We have also found that when there are restrictions such as pre-existing monitoring locations or the ones along roads, the spatial estimation becomes poor even with the same number of monitoring locations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

RatBot: anti-enumeration peer-to-peer botnets

Botnets have emerged as one of the most severe cyber threats in recent years. To obtain high resilience against a single point of failure, the new generation of botnets have adopted the peer-to-peer (P2P) structure. One critical question regarding these P2P botnets is: how big are they indeed? To address this question, researchers have proposed both actively crawling and passively monitoring methods to enumerate existing P2P botnets. In this work, we go further to explore the potential strategies that botnets may have to obfuscate their true sizes. Towards this end, this paper introduces RatBot, a P2P botnet that applies some statistical techniques to defeat existing P2P botnet enumeration methods. The key ideas of RatBot are two-fold: (1) there exist a fraction of bots that are indistinguishable from their fake identities, which are spoofing IP addresses they use to hide themselves; (2) we use a heavy-tailed distribution to generate the number of fake identities for each of these bots so that the sum of observed fake identities converges only slowly and thus has high variation. We use large-scale high-fidelity simulation to quantify the estimation errors under diverse settings, and the results show that a naive enumeration technique can overestimate the sizes of P2P botnets by one order of magnitude. We believe that our work reveals new challenges of accurately estimating the sizes of P2P botnets, and hope that it will raise the awareness of security practitioners with these challenges. We further suggest a few countermeasures that can potentially defeat RatBot's anti-enumeration scheme.

97 MATHEMATICS AND COMPUTING↗

Development and Clinical Evaluation of a Three-Dimensional Cone-Beam Computed Tomography Estimation Method Using a Deformation Field Map

Purpose: To develop a three-dimensional (3D) cone-beam computed tomography (CBCT) estimation method using a deformation field map, and to evaluate and optimize the efficiency and accuracy of the method for use in the clinical setting. Methods and Materials: We propose a method to estimate patient CBCT images using prior information and a deformation model. Patients' previous CBCT data are used as the prior information, and the new CBCT volume to be estimated is considered as a deformation of the prior image volume. The deformation field map is solved by minimizing deformation energy and maintaining new projection data fidelity using a nonlinear conjugate gradient method. This method was implemented in 3D form using hardware acceleration and multi-resolution scheme, and it was evaluated for different scan angles, projection numbers, and scan directions using liver, lung, and prostate cancer patient data. The accuracy of the estimation was evaluated by comparing the organ volume difference and the similarity between estimated CBCT and the CBCT reconstructed from fully sampled projections. Results: Results showed that scan direction and number of projections do not have significant effects on the CBCT estimation accuracy. The total scan angle is the dominant factor affecting the accuracy of the CBCT estimation algorithm. Larger scan angles yield better estimation accuracy than smaller scan angles. Lung cancer patient data showed that the estimation error of the 3D lung tumor volume was reduced from 13.3% to 4.3% when the scan angle was increased from 60 Degree-Sign to 360 Degree-Sign using 57 projections. Conclusions: The proposed estimation method is applicable for 3D DTS, 3D CBCT, four-dimensional CBCT, and four-dimensional DTS image estimation. This method has the potential for significantly reducing the imaging dose and improving the image quality by removing the organ distortion artifacts and streak artifacts shown in images reconstructed by the conventional Feldkamp-Davis-Kress (FDK) algorithm.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Influence of defects on the thermal conductivity of compressed LiF

We report defect formation in LiF, which is used as an observation window in ramp and shock experiments, has significant effects on its transmission properties. Given the extreme conditions of the experiments it is hard to measure the change in transmission directly. Using molecular dynamics, we estimate the change in conductivity as a function of the concentration of likely point and extended defects using a Green-Kubo technique with careful treatment of size effects. With this data, we form a model of the mean behavior and its estimated error; then, we use this model to predict the conductivity of a large sample of defective LiF resulting from a direct simulation of ramp compression as a demonstration of the accuracy of its predictions. Given estimates of defect densities in a LiF window used in an experiment, the model can be used to correct the observations of thermal energy through the window. Also, the methodology we develop is extensible to modeling, with quantified uncertainty, the effects of a variety of defects on the thermal conductivity of solid materials.

36 MATERIALS SCIENCE↗

Weak Form Scientific Machine Learning: Test Function Construction for System Identification

Weak form Scientific Machine Learning (WSciML) is a recently developed framework for data-driven modeling and scientific discovery. It leverages the weak form of equation error residuals to provide enhanced noise robustness in system identification via convolving model equations with test functions, reformulating the problem to avoid direct differentiation of data. The performance, however, relies on wisely choosing a set of compactly supported test functions. In this work, we mathematically motivate a novel data-driven method for constructing Single-scale-Local reference functions for creating the set of test functions. Our approach numerically approximates the integration error introduced by the quadrature and identifies the support size for which the error is minimal, without requiring access to the model parameter values. Through numerical experiments across various models, noise levels, and temporal resolutions, we demonstrate that the selected supports consistently align with regions of minimal parameter estimation error. We also compare the proposed method against the strategy for constructing Multi-scale-Global (and orthogonal) test functions introduced in our prior work, demonstrating the improved computational efficiency.

FOS: Computer and information sciences↗

Airplane wing vibrations due to atmospheric turbulence

The magnitude of error introduced due to wing vibration when measuring atmospheric turbulence with a wind probe mounted at the wing tip was studied. It was also determined whether accelerometers mounted on the wing tip are needed to correct this error. A spectrum analysis approach is used to determine the error. Estimates of the B-57 wing characteristics are used to simulate the airplane wing, and von Karman's cross spectrum function is used to simulate atmospheric turbulence. It was found that wing vibration introduces large error in measured spectra of turbulence in the frequency's range close to the natural frequencies of the wing.

Pastel, R. L.↗

Use of GRACE Terrestrial Water Storage Retrievals to Evaluate Model Estimates by the Australian Water Resources Assessment System

Terrestrial water storage (TWS) estimates retrievals from the Gravity Recovery and Climate Experiment (GRACE) satellite mission were compared to TWS modeled by the Australian Water Resources Assessment (AWRA) system. The aim was to test whether differences could be attributed and used to identify model deficiencies. Data for 2003 2010 were decomposed into the seasonal cycle, linear trends and the remaining de-trended anomalies before comparing. AWRA tended to have smaller seasonal amplitude than GRACE. GRACE showed a strong (greater than 15 millimeter per year) drying trend in northwest Australia that was associated with a preceding period of unusually wet conditions, whereas weaker drying trends in the southern Murray Basin and southwest Western Australia were associated with relatively dry conditions. AWRA estimated trends were less negative for these regions, while a more positive trend was estimated for areas affected by cyclone Charlotte in 2009. For 2003-2009, a decrease of 7-8 millimeter per year (50-60 cubic kilometers per year) was estimated from GRACE, enough to explain 6-7% of the contemporary rate of global sea level rise. This trend was not reproduced by the model. Agreement between model and data suggested that the GRACE retrieval error estimates are biased high. A scaling coefficient applied to GRACE TWS to reduce the effect of signal leakage appeared to degrade quantitative agreement for some regions. Model aspects identified for improvement included a need for better estimation of rainfall in northwest Australia, and more sophisticated treatment of diffuse groundwater discharge processes and surface-groundwater connectivity for some regions.

van Dijk, A. I. J. M.↗

Battery state of health monitoring by estimation of the number of cyclable Li-ions

Herein this paper introduces a method to monitor battery state of health (SOH) by estimating the number of cyclable Li-ions, a health-relevant electrochemical variable. SOH monitoring is critical to battery management in balancing the trade-off between maximizing system performance and minimizing battery degradation. The decrease of cyclable Li-ions indicates the effect on the SOH of degradation mechanisms that consume cyclable Li-ions. The unavailability of the number of cyclable Li-ions through non-invasive measurements makes its estimation necessary for in-situ SOH monitoring. In this paper, the extended Kalman filter (EKF) is used to estimate the number of cyclable Li-ions as an unknown battery parameter. The single particle model (SPM), a simplified battery electrochemical model, is used as the model in the EKF to achieve a computational complexity suitable for on-line estimation. Simulations are performed under typical electric vehicle current trajectories using an example parameter set for a hybrid-electric-vehicle battery. In the simulations, the battery is represented by the Doyle–Fuller–Newman (DFN) model, an electrochemical model with higher fidelity than the SPM. To comply with the practice, instead of using the same parameters as the DFN model in the SPM, parameterization of the SPM is performed before estimation of the number of cyclable Li-ions. The simulations show high estimation accuracy of the number of cyclable Li-ions using the EKF, even with the structural and parametric differences between the DFN model and the SPM, under both the ideal conditions and various non-ideal conditions (i.e., SOC estimation error, additional modeling error, and measurement noise).

25 ENERGY STORAGE↗

A study of shock initiation experiments for the explosive PBX 9502 using three reactive burn models

Shock to detonation transition (SDT) experiments are essential in calibrating and validating reactive burn models for explosives. This work investigates the large collection of SDT test data for the explosive PBX 9502 at ambient temperature that was presented by Gustavsen, Sheffield, and Alcon [Journal of Applied Physics, 99, 114907 (2006)]. We first analyze the experimental data and compare two different methods of determining the shock transition time/distance (namely, the bilinear method and the single-curve method). This reveals some of the uncertainty in estimating shock transition points, which contributes to scatter in Pop-plot data. Next, we compare the WSD, AWSD, and SURFplus reactive burn models for a collection of approximately 20 experimental shots using the FLAG hydrocode. Error estimates are used to quantify how well each reactive burn model (and their respective parameter calibrations) performs at predicting the SDT process for a range of loading conditions. Additionally, the importance of mesh resolution and numerical dissipation in SDT simulations will be assessed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large-momentum effective theory’s asymptotic extrapolation vs the inverse problem

Large-momentum effective theory is a physics-guided systematic expansion to calculate light-cone parton distributions, including collinear (PDFs) and transverse-momentum-dependent ones, at any fixed momentum fraction 𝑥 within a range of [𝑥 min , 𝑥 max ]. It theoretically solves the ill-posed inverse problem that afflicts other theoretical approaches to collinear PDFs, such as short-distance factorizations. Recently, Dutrieux et al. raised practical concerns about whether current or even future lattice data will have sufficient precision in the subasymptotic correlation region to support an error-controlled extrapolation—and if not, whether it becomes an inverse problem where the relevant uncertainties cannot be properly quantified. While we agree that not all current lattice data have the desired precision to qualify for an asymptotic extrapolation, some calculations do, and more are expected in the future. We comment on the analysis and results in Dutrieux et al. and argue that a physics-based systematic extrapolation still provides the most reliable error estimates, even when the data quality is not ideal. In contrast, reframing the long-distance asymptotic extrapolation as a data-driven-only inverse problem with ad hoc mathematical conditioning could lead to unnecessarily conservative errors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

THE LARGE-SCALE THREE-POINT CORRELATION FUNCTION OF SLOAN DIGITAL SKY SURVEY LUMINOUS RED GALAXIES

We present new measurements of the redshift-space three-point correlation function (3PCF) of Luminous Red Galaxies (LRGs) from the Sloan Digital Sky Survey (SDSS). Using the largest data set to date, the Data Release 7 LRGs, and an improved binning scheme compared to previous measurements, we measure the LRG 3PCF on large scales up to {approx}90 h{sup -1} Mpc, from the mildly nonlinear to quasi-linear regimes. Comparing the LRG correlations to the dark matter two- and three-point correlation functions, obtained from N-body simulations we infer linear and nonlinear bias parameters. As expected, LRGs are highly biased tracers of large-scale structure, with a linear bias b{sub 1} {approx} 2; the LRGs also have a large positive nonlinear bias parameter, in agreement with predictions of galaxy population models. The use of the 3PCF to estimate biasing helps to also make estimates of the cosmological parameter {sigma}{sub 8}, as well as to infer best-fit parameters of the halo occupation distribution parameters for LRGs. We also use a large suite of public mock catalogs to characterize the error covariance matrix for the 3PCF and compare the variance among simulation results with jackknife error estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

Axial, scalar, and tensor charges of the nucleon from 2+1+1-flavor Lattice QCD

We present results for the isovector axial, scalar, and tensor charges 𝑔$^{𝑢−𝑑}_{𝐴}$, 𝑔$^{𝑢−𝑑}_{𝑆}$, and 𝑔$^{𝑢−𝑑}_{𝑇}$ of the nucleon needed to probe the Standard Model and novel physics. The axial charge is a fundamental parameter describing the weak interactions of nucleons. The scalar and tensor charges probe novel interactions at the TeV scale in neutron and nuclear 𝛽-decays, and the flavor-diagonal tensor charges 𝑔$^{𝑢}_{𝑇}$, 𝑔$^{𝑑}_{𝑇}$, and 𝑔$^{𝑠}_{𝑇}$ are needed to quantify the contribution of the quark electric dipole moment (EDM) to the neutron EDM. The lattice-QCD calculations were done using nine ensembles of gauge configurations generated by the MILC Collaboration using the highly improved staggered quarks action with 2+1+1 dynamical flavors. These ensembles span three lattice spacings 𝑎 ≈0.06,0.09, and 0.12 fm and light-quark masses corresponding to the pion masses 𝑀 𝜋 ≈ 135,225, and 315 MeV. High-statistics estimates on five ensembles using the all-mode-averaging method allow us to quantify all systematic uncertainties and perform a simultaneous extrapolation in the lattice spacing, lattice volume, and light-quark masses for the connected contributions. Our final estimates, in the $\overline{MS}$ scheme at 2 GeV, of the isovector charges are 𝑔$^{𝑢−𝑑}_{𝐴}$ = 1.195⁢(33)⁢(20), 𝑔$^{𝑢−𝑑}_{𝑆}$ = 0.97⁢(12)⁢(6), and 𝑔$^{𝑢−𝑑}_{𝑇}$ = 0.987⁢(51)⁢(20). The first error includes statistical and all systematic uncertainties except that due to the extrapolation Ansatz, which is given by the second error estimate. Combining our estimate for 𝑔$^{𝑢−𝑑}_{𝑆}$ with the difference of light quarks masses (𝑚 𝑑 − 𝑚 𝑢 ) QCD = 2.67⁢(35) MeV given by the Flavor Lattice Average Group, we obtain (𝑀 𝑁 − 𝑀 𝑃 ) QCD = 2.59⁢(49) MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ICESat-2 Pointing Calibration and Geolocation Performance

ICESat-2 science requirements are dependent on the accurate real-time pointing control (i.e. geolocation control) and post-processed geolocation knowledge of the laser altimeter surface returns. Pre-launch pointing alignment errors and post-launch pointing alignment variation result in large geolocation errors that must be calibrated on orbit. In addition, the changing sun-orbit geometry causes thermal-mechanical forced laser frame alignment variations at the orbit period and trends from days, weeks and months. Early mission analysis computed precise post-launch laser beam alignment calibration. The alignment calibration was uploaded to the spacecraft and enabled the pointing control performance to achieve 4.4 ± 6.0 m, a significant improvement over the 45 m (1 σ) mission requirement. Laser frame alignment calibrations are used to reduce the alignment bias and time variation, as well as the orbital variation contributions to geolocation knowledge error from 6 m to 1.7 m (1 σ). Relative beam alignment of the six beams is calibrated and shown to contribute between 0.5 ± 0.1 m and 2.4 ± 0.2 m of remaining geolocation knowledge error. Independent geolocation assessment based on comparison to high-resolution digital elevation models agrees well with the calibration geolocation error estimates. The analysis demonstrates the ICESat-2 mission is performing far better than its geolocation knowledge requirement of 6.5 m (1 σ) after the laser frame alignment bias variation and orbital variation calibrations have been applied. Remaining geolocation error is beam dependent and ranges from 2.5 m for beam 6 to 4.4 m for beam 2 (mean + 1 σ).

S. B. Luthcke↗

ICESat-2 Pointing Calibration and Geolocation Performance

ICESat-2 science requirements are dependent on the accurate real-time pointing control (i.e., geolocation control) and postprocessed geolocation knowledge of the laser altimeter surface returns. Prelaunch pointing alignment errors and postlaunch pointing alignment variation result in large geolocation errors that must be calibrated on orbit. In addition, the changing sun-orbit geometry causes thermal-mechanical forced laser frame alignment variations at the orbit period and trends from days, weeks, and months. Early mission analysis computed precise postlaunch laser beam alignment calibration. The alignment calibration was uploaded to the spacecraft and enabled the pointing control performance to achieve 4.4 ± 6.0 m, a significant improvement over the 45 m (1 σ) mission requirement. Laser frame alignment calibrations are used to reduce the alignment bias and time variation, as well as the orbital variation contributions to geolocation knowledge error from 6 to 1.7 m (1 σ). Relative beam alignment of the six beams is calibrated and shown to contribute between 0.5 ± 0.1 m and 2.4 ± 0.2 m of remaining geolocation knowledge error. Independent geolocation assessment based on comparison to high-resolution digital elevation models agrees well with the calibration geolocation error estimates. The analysis demonstrates the ICESat-2 mission is performing far better than its geolocation knowledge requirement of 6.5 m (1 σ) after the laser frame alignment bias variation and orbital variation calibrations have been applied. Remaining geolocation error is beam dependent and ranges from 2.5 m for beam 6 to 4.4 m for beam 2 (mean + 1 σ).

S B Luthcke↗

Construction of the Nordsieck second derivative methods with RK stability for stiff ODEs

In this paper, we study the construction and implementation of special Nordsieck second derivative general linear methods of order p and stage order q=p in which the number of input and output values is r=p rather than r=p+1. We will construct A- and L-stable methods of orders three and four in this form with Runge–Kutta stability properties. The efficiency of the constructed methods and reliability of the proposed error estimates are shown by implementing of the methods in a variable stepsize environment on some well-known stiff problems.

97 MATHEMATICS AND COMPUTING↗