Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Chemical potential shift in organic field-effect transistors identified by soft X-ray operando nano-spectroscopy

A chemical potential shift in an organic field effect transistor (OFET) during operation has been revealed by soft X-ray operando nano-spectroscopy analysis performed using a three-dimensional nanoscale electron-spectroscopy chemical analysis system. OFETs were fabricated using ultrathin (3 ML or 12 nm) single-crystalline C10-DNBDT-NW films on SiO{sub 2} (200 nm)/Si substrates with a backgate electrode and top source/drain Au electrodes, and C 1s line profiles under biasing at the backgate and drain electrodes were measured. When applying −30 V to the backgate, there is C 1s core level shift of 0.1 eV; this shift can be attributed to a chemical potential shift corresponding to band bending by the field effect, resulting in p-type doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation on improved performance of Erbium doped TiO2 nanowire based UV detector

Highlights: • PL study showed the removal of oxygen defects of TiO{sub 2} material after Er doping. • Superior photosensitivity was obtained for Er:TiO{sub 2} NW based detector. • Detectivity and NEP were calculated for both undoped and doped detectors. • Photoswitching was observed for Er:TiO{sub 2} NW detector at 350 nm of wavelength. - Abstract: Undoped TiO{sub 2} and Erbium doped TiO{sub 2} nanowires (Er:TiO{sub 2} NWs) were synthesized on respective thin films using e-beam cum glancing angle deposition technique onto n-type silicon substrates. The length of the NWs was ∼182 nm as calculated from field emission gun scanning electron microscopy images. Transmission electron microscopy showed an average NW length of 173 nm. Polycrystalline nature of both samples was obtained from the selected area electron diffraction analysis as well as from the X-ray diffraction (XRD) analysis. Energy dispersive X-ray spectroscopy and variation in the grain size (calculated from XRD) confirmed the doping of Erbium in case of Er:TiO{sub 2} NWs. Increased absorption, as well as enhanced bandgap, was observed for Er:TiO{sub 2} NWs compared to the undoped TiO{sub 2} NWs. Superior device performance in terms of detectivity, sensitivity and photoswitching was obtained for Er:TiO{sub 2} NWs as compared to the undoped TiO{sub 2} NWs in the UV region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A comprehensive study of thermoelectric and transport properties of β-silicon carbide nanowires

The temperature dependence of the Seebeck coefficient, the electrical and thermal conductivities of individual β-silicon carbide nanowires produced by combustion in a calorimetric bomb were studied using a suspended micro-resistance thermometry device that allows four-point probe measurements to be conducted on each nanowire. Additionally, crystal structure and growth direction for each measured nanowire was directly obtained by transmission electron microscopy analysis. The Fermi level, the carrier concentration, and mobility of each nanostructure were determined using a combination of Seebeck coefficient and electrical conductivity measurements, energy band structure and transport theory calculations. The temperature dependence of the thermal and electrical conductivities of the nanowires was explained in terms of contributions from boundary, impurity, and defect scattering.

36 MATERIALS SCIENCE↗

Structural and physicochemical insights into pH-responsive poly(DEAEMA- co -HEMA)-grafted mesoporous silica nanoparticles

Mesoporous silica nanoparticles (SiO 2 ) grafted with responsive polymer shells are versatile hybrid systems. Understanding their three-dimensional organization in the hydrated state remains a significant challenge. Here, in this study, SiO 2 nanoparticles were functionalized with a poly(DEAEMA-co-HEMA) shell via a “grafting-from” polymerization strategy in aqueous media. Successful surface modification was confirmed by FTIR, thermogravimetric analysis, transmission electron microscopy, X-ray photoelectron spectroscopy, N 2 sorption, and ζ-potential, yielding grafting contents of 22% (p1 DEAEMA-co-HEMA ) and 49% (p2 DEAEMA-co-HEMA ). Small-angle neutron scattering (SANS) with solvent contrast variation was employed to elucidate the solution-state core–shell architecture of p1 and p2 hybrids at pH 2, where the grafted polymer shell is protonated and highly hydrated. Near contrast matching of the silica core, theoretically estimated at 58% D 2 O, suppressed the scattering intensity, enhancing sensitivity to the polymer shell. Constrained core–shell ellipsoid modeling across solvent contrasts revealed a systematic increase in shell thickness, overall particle dimensions, and shell anisotropy with increasing grafting content. In solution, the hydrated polymer shells were markedly more extended and structurally anisotropic than suggested by dry-state techniques structural characterization, highlighting the importance of solution-state structural analysis for accurately describing grafted polymer architectures.

Core-shell biomaterials↗

Solar assisted alkali pretreatment of garden biomass: Effects on lignocellulose degradation, enzymatic hydrolysis, crystallinity and ultra-structural changes in lignocellulose

Highlights: • SAAP is an efficient and economic means of pretreatment. • SAAP was found to be efficient in lignin and hemicellulose removal. • SAAP enhanced the enzymatic hydrolysis. • FTIR, XRD and SEM provided vivid understanding about the mode of action of SAAP. • Mass balance closer of 98% for pretreated GB confirmed the reliability of SAAP. - Abstract: A comprehensive study was carried out to assess the effectiveness of solar assisted alkali pretreatment (SAAP) on garden biomass (GB). The pretreatment efficiency was assessed based on lignocellulose degradation, conversion of cellulose into reducing sugars, changes in the ultra-structure and functional groups of lignocellulose and impact on the crystallinity of cellulose, etc. SAAP was found to be efficient for the removal of lignin and hemicellulose that facilitated enzymatic hydrolysis of cellulose. FTIR and XRD studies provided details on the effectiveness of SAAP on lignocellulosic moiety and crystallinity of cellulose. Scanning electron microscopic analysis showed ultra-structural disturbances in the microfibrils of GB as a result of pretreatment. The mass balance closer of 97.87% after pretreatment confirmed the reliability of SAAP pretreatment. Based on the results, it is concluded that SAAP is not only an efficient means of pretreatment but also economical as it involved no energy expenditure for heat generation during pretreatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of annealing on the properties of Sb doped ZnO thin films prepared by spray pyrolysis technique

Sb doped ZnO thin films have been deposited on glass substrate at 450°C using spray pyrolysis technique. The X-ray diffraction studies revealed that the as deposited films are polycrystalline in nature with (100) preferred orientation. Whereas the films annealed at 450° C for 6h show a preferential orientation along (101) direction. Crystallites size varies from 15.7 nm to 34.95 nm with annealing duration. The Scanning electron microscopic analysis shows the plane and smooth surface of the films. The optical properties of annealed films have shown a variation in the band gap between 3.37 eV and 3.19 eV. Transparency of as grown and annealed films decreases from 78 % to 65% respectively in the visible region. The electrical conductivity of the as grown film shows an increase in the electrical conductivity by one order of magnitude with increase in the annealing duration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

KINETIC TURBULENCE IN THE TERRESTRIAL MAGNETOSHEATH: CLUSTER OBSERVATIONS

We present a first statistical study of subproton- and electron-scale turbulence in the terrestrial magnetosheath using waveform data measured by the Cluster/STAFF search coil magnetometer in the frequency range [1, 180] Hz. It is found that clear spectral breaks exist near the electron scale, which separate two power-law-like frequency bands referred to as the dispersive and the electron dissipation ranges. The frequencies of the breaks f{sub b} are shown to be well correlated with the electron gyroscale ρ {sub e} rather than with the electron inertial length d{sub e} . The distribution of the slopes below f{sub b} is found to be narrow and peaks near –2.9, while that of the slopes above f{sub b} is found to be broader, peaking near –5.2, with values as low as –7.5. This is the first time that such steep power-law spectra are reported in space plasma turbulence. These observations provide new constraints on theoretical modeling of kinetic turbulence and dissipation in collisionless magnetized plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Contact-induced spin polarization in BNNT(CNT)/TM (TM=Co, Ni) nanocomposites

The interaction between carbon and BN nanotubes (NT) and transition metal Co and Ni supports was studied using electronic structure calculations. Several configurations of interfaces were considered, and the most stable ones were used for electronic structure analysis. All NT/Co interfaces were found to be more energetically favorable than NT/Ni, and conductive carbon nanotubes demonstrate slightly stronger bonding than semiconducting ones. The presence of contact-induced spin polarization was established for all nanocomposites. It was found that the contact-induced polarization of BNNT leads to the appearance of local conductivity in the vicinity of the interface while the rest of the nanotube lattice remains to be insulating.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct observation of enhanced emission sites in nitrogen implanted hybrid structured ultrananocrystalline diamond films

A hybrid-structured ultrananocrystalline diamond (h-UNCD) film, synthesized on Si-substrates by a two-step microwave plasma enhanced chemical vapour deposition (MPECVD) process, contains duplex structure with large diamond aggregates evenly dispersed in a matrix of ultra-small grains ({approx}5 nm). The two-step plasma synthesized h-UNCD films exhibit superior electron field emission (EFE) properties than the one-step MPECVD deposited UNCD films. Nitrogen-ion implantation/post-annealing processes further improve the EFE properties of these films. Current imaging tunnelling spectroscopy in scanning tunnelling spectroscopy mode directly shows increased density of emission sites in N implanted/post-annealed h-UNCD films than as-prepared one. X-ray photoelectron spectroscopy measurements show increased sp{sup 2} phase content and C-N bonding fraction in N ion implanted/post-annealed films. Transmission electron microscopic analysis reveals that the N implantation/post-annealing processes induce the formation of defects in the diamond grains, which decreases the band gap and increases the density of states within the band gap of diamond. Moreover, the formation of nanographitic phase surrounding the small diamond grains enhanced the conductivity at the diamond grain boundaries. Both of the phenomena enhance the EFE properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of dye-sensitized solar cell (DSSC) using annato seeds (Bixa orellana Linn)

The Fabrication of dye sensitized solar cell (DSSC) using Annato seeds has been conducted in this study. Annato seeds (Bixa orellana Linn) used as a sensitizer for dye sensitized solar cell. The experimental parameter was concentration of natural dye. Annato seeds was extracted using etanol solution and the concentration was controlled by varying mass of Annato seeds. A semiconductor TiO{sub 2} was prepared by a screen printing method for coating glass use paste of TiO{sub 2}. Construction DSSC used layered systems (sandwich) consists of working electrode (TiO{sub 2} semiconductor-dye) and counter electrode (platina). Both are placed on conductive glass and electrolytes that occur electrons cycle. The characterization of thin layer of TiO{sub 2} was conducted using SEM (Scanning Electron Microscpy) analysis showed the surface morphology of TiO{sub 2} thin layer and the cross section of a thin layer of TiO{sub 2} with a thickness of 15–19 μm. Characterization of natural dye extract was determined using UV-Vis spectrometry analysis shows the wavelength range annato seeds is 328–515 nm, and the voltage (V{sub oc}) and electric current (I{sub sc}) resulted in keithley test for 30 gram, 40 gram, and 50 gram were 0,4000 V; 0,4251 V; 0,4502 V and 0,000074 A; 0,000458 A; 0,000857 A, respectively. The efficiencies of the fabricated solar cells using annato seeds as senstizer for each varying mass are 0,00799%, 0,01237%, and 0,05696%.

36 MATERIALS SCIENCE↗

Exponentially decaying magnetic coupling in sputtered thin film FeNi/Cu/FeCo trilayers

Magnetic coupling in trilayer films of FeNi/Cu/FeCo deposited on Si/SiO{sub 2} substrates have been studied. While the thicknesses of the FeNi and FeCo layers were kept constant at 100 Å, the thickness of the Cu spacer was varied from 5 to 50 Å. Both hysteresis loop and ferromagnetic resonance results indicate that all films are ferromagnetically coupled. Micromagnetic simulations well reproduce the ferromagnetic resonance mode positions measured by experiments, enabling the extraction of the coupling constants. Films with a thin Cu spacer are found to be strongly coupled, with an effective coupling constant of 3 erg/cm{sup 2} for the sample with a 5 Å Cu spacer. The strong coupling strength is qualitatively understood within the framework of a combined effect of Ruderman-Kittel-Kasuya-Yosida and pinhole coupling, which is evidenced by transmission electron microscopy analysis. The magnetic coupling constant surprisingly decreases exponentially with increasing Cu spacer thickness, without showing an oscillatory thickness dependence. This is partially connected to the substantial interfacial roughness that washes away the oscillation. The results have implications on the design of multilayers for spintronic applications.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Nanocrystalline Fe{sub (100−x)}Ni{sub (x)} Alloy Powders by Auto-combustion and Hydrogen Reduction

Nanocrystalline Fe{sub 90}Ni{sub 10,} Fe{sub 70}Ni{sub 30} andFe{sub 50}Ni{sub 50} alloy powders were successfully synthesized using a simple auto-combustion route followed by hydrogen reduction. The experimental work consisted of two steps, where the first step was auto-combustion and, the second step was reduction of the combusted powders. Citric acid was used as fuel during combustion, and citrate to nitrate ratio (C/N) was maintained at 0.3. NiFe{sub 2}O{sub 4} and Fe{sub 2}O{sub 3} phase formation occurred in obtained powders. Obtained powders were reduced in a hydrogen atmosphere at 700 °C/1 h for alloy formation. X-ray diffraction results revealed the presence of BCC α-(Fe,Ni) and FCC γ-(Fe,Ni) phases in reduced powders. Rietveld refinement technique was used to confirm α-(Fe,Ni) and γ-(Fe,Ni) phases with Im-3 m and Fm-3 m space groups, respectively. The Fe{sub 50}Ni{sub 50} powder has been found to have a single γ-(Fe,Ni) phase. Crystallite size of synthesized powders was calculated using the Scherrer equation and transmission electron microscopic analysis, which has been found < 50 nm. The nanocrystalline powders of all three compositions have shown soft magnetic nature with high saturation magnetization (Ms) and low coercivity (Hc). Effect of composition on the phase formation, microstructure and magnetic behavior was investigated. This rapid and simple process for attaining nanoparticles of Fe-Ni alloys with high Ms is expected to be useful in potent applications such as sensors, biomedical applications and electromagnetic wave absorbers.

36 MATERIALS SCIENCE↗

First-Principles Calculations on the Wettability of Li Atoms on the (111) Surfaces of W and Mo Substrates

Comprehension over the interactions between lithium (Li) atoms and tungsten (W) or molybdenum (Mo) are crucial to improve the wettability of the flowing liquid Li, a candidate plasma facing material in fusion devices, on the surfaces of supported substrate metals. In this work, we utilize first-principles density- functional theory calculations to figure out the adsorption and diffusion properties of Li atoms and clusters on the (111) surfaces of W and Mo. It is found that single Li atom in the fcc-hollow site is the most favored configuration. For the multiple Li atoms adsorption on the substrates, the planar construction is more stable than the stacking one. The electronic structure analysis shows that the lateral interaction between Li atoms is very weak and the binding between Li atom and the substrates is strong; therefore, it can be inferred that the liquid Li is “wetting” intrinsically on the surfaces of the W and Mo substrates. We also investigate the effect of defects (vacancy, H, C, and O) and find that the preexisted vacancy in the substrates has little effect on the wettability; however, the impurities (especially O atom) will hinder the movement of Li atoms on the metal substrates.

36 MATERIALS SCIENCE↗

On the nonlinearity of the Langmuir turbulence excited by a weak electron beam-plasma interaction

In the present study, we analyze the data sets produced by a one-dimensional Vlasov-Poisson simulation of the weak electron beam-plasma instability to clarify the nonlinearity of the Langmuir turbulence excited by the weak-beam interaction. The growth of wave number modes is analyzed by using the momentum equation of the whole electrons. The analysis shows that the primary Langmuir wave mode is almost linear, while the nonlinear terms play important roles in the growth of the lower harmonic mode and the secondary higher harmonic mode. After the linear growth saturates, while the wave power of the primary mode is much larger than the other modes, linear and nonlinear interactions occurring in both lower harmonic and secondary higher harmonic modes are more active than those in the primary mode. Nonlinearity in the system comes from the advection rather than the ponderomotive forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasmonic Field Enhancement of Individual Nanoparticles by Correlated Scanning and Photoemission Electron Microscopy

We present results of a combined two-photon photoemission and scanning electron microscopy investigation to determine the electromagnetic enhancement factors of silver-coated spherical nanoparticles deposited on an atomically flat mica substrate. Femtosecond laser excitation, of the nanoparticles, produces intense photoemission, attributed to near-resonant excitation of localized surface plasmons. Enhancement factors are determined by comparing the respective two-photon photoemission yield measured for equal areas between single nanoparticles to that of the surrounding flat surface. For s-polarized, 400 nm (~ 3.1 eV) femtosecond radiation a distribution of enhancement factors are found with a large percentage (77%) of the nanoparticles falling within a median range. A correlated scanning electron microscopy analysis demonstrated that the nanoparticles typifying the median of the distribution were characterized by ideal spherical shapes and defect-free morphologies. The single largest enhancement factors were in contrast produced by a very small percentage (8%) of the total, for which evidence of silver defect anomalies were found that contributed to the overall structure of the nanoparticle. Comparisons are made between the experimentally measured enhancement factors and previously reported theoretical predictions of the localized surface plasmon near-field intensities for isolated nanometer-sized silver spheres.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites

Modified technique of metal injection molding (MIM) was used to fabricate multiwalled carbon nanotube (CNT) reinforced Cu nanocomposites. The effect of adding different amount of CNTs (0-10 vol.%) on the thermal and mechanical behaviour of the fabricated nanocomposites is presented. Scanning electron microscope analysis revealed homogenous dispersion of CNTs in Cu matrices at different CNTs contents. The experimentally measured thermal conductivities of Cu/CNTs nanocomposites showed extraordinary increase (76% higher than pure sintered Cu) with addition of 10 vol.% CNTs. As compared to the pure sintered Cu, increase in modulus of elasticity (Young's modulus) of Cu/CNTs nanocomposites sintered at 1050°C for 2.5 h was measured to be 48%. However, in case of 7.5 vol.% CNTs, Young's modulus was increased significantly about 51% compared to that of pure sintered Cu.

36 MATERIALS SCIENCE↗

SiC/Si{sub 3}N{sub 4} nanotubes from peanut shells

Nanotubes and nanoparticles of SiC and Si{sub 3}N{sub 4} were produced from the thermal treatment of peanut shells in argon and nitrogen atmospheres respectively, at temperatures in excess of 1350°C. Using x-ray diffraction, Raman spectroscopy and transmission electron microscopy analysis, the processed samples in argon atmosphere were shown to consist of 2H and 3C polytypes of SiC nanoparticles and nanotubes. Whereas the samples prepared in nitrogen atmosphere consisted of α-phase of Si{sub 3}N{sub 4}. Nanostructures formed by a single direct reaction provide a sustainable synthesis route for nanostructured SiC and Si{sub 3}N{sub 4}, for potential engineering applications due to their exceptional mechanical and electro-optic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimental studies of mitochondrial function in CADASIL vascular smooth muscle cells

Cerebral Autosomal Dominant Arteriopathy with Subcortical Infarcts and Leukoencephalopathy (CADASIL) is a familiar fatal progressive degenerative disorder characterized by cognitive decline, and recurrent stroke in young adults. Pathological features include a dramatic reduction of brain vascular smooth muscle cells and severe arteriopathy with the presence of granular osmophilic material in the arterial walls. Here we have investigated the cellular and mitochondrial function in vascular smooth muscle cell lines (VSMCs) established from CADASIL mutation carriers (R133C) and healthy controls. We found significantly lower proliferation rates in CADASIL VSMC as compared to VSMC from controls. Cultured CADASIL VSMCs were not more vulnerable than control cells to a number of toxic substances. Morphological studies showed reduced mitochondrial connectivity and increased number of mitochondria in CADASIL VSMCs. Transmission electron microscopy analysis demonstrated increased irregular and abnormal mitochondria in CADASIL VSMCs. Measurements of mitochondrial membrane potential (Δψ{sub m}) showed a lower percentage of fully functional mitochondria in CADASIL VSMCs. For a number of genes previously reported to be changed in CADASIL VSMCs, immunoblotting analysis demonstrated a significantly reduced SOD1 expression. These findings suggest that alteration of proliferation and mitochondrial function in CADASIL VSMCs might have an effect on vital cellular functions important for CADASIL pathology. -- Highlights: ► CADASIL is an inherited disease of cerebral vascular cells. ► Mitochondrial dysfunction has been implicated in the pathogenesis of CADASIL. ► Lower proliferation rates in CADASIL VSMC. ► Increased irregular and abnormal mitochondria and lower mitochondrial membrane potential in CADASIL VSMCs. ► Reduced mitochondrial connectivity and increased number of mitochondria in CADASIL VSMCs.

60 APPLIED LIFE SCIENCES↗