Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The annihilation of antiphase boundary tubes and their effect on strengthening in Ni 3 Al

The temperature at which antiphase boundary (APB) tubes anneal out of lightly-strained Ni-rich Ni 3 Al thin foils has been measured via in-situ heating in a transmission electron microscope to be ~530 °C. Given this new information, the wealth of literature on the mechanical properties of Ni 3 Al across the entire temperature regime of the yield stress anomaly, ~25–800 °C, is re-evaluated to consider the impact of APB tubes. Contrary to previous theoretical predications, APB tubes do not appear to affect the strength of Ni 3 Al.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Isostructural bridging diferrous chalcogenide cores [Fe II (μ-E)Fe II ] (E = O, S, Se, Te) with decreasing antiferromagnetic coupling down the chalcogenide series

Iron compounds containing a bridging oxo or sulfido moiety are ubiquitous in biological systems, but substitution with the heavier chalcogenides selenium and tellurium, however, is much rarer, with only a few examples reported to date. Here we show that treatment of the ferrous starting material [( tBu pyrpyrr 2 )Fe(OEt 2 )] (1-OEt 2 ) ( tBu pyrpyrr 2 = 3,5- t Bu 2 -bis(pyrrolyl)pyridine) with phosphine chalcogenide reagents E = PR 3 results in the neutral phosphine chalcogenide adduct series [( tBu pyrpyrr 2 )Fe(EPR 3 )] (E = O, S, Se; R = Ph; E = Te; R = t Bu) (1-E) without any electron transfer, whereas treatment of the anionic starting material [K] 2 [( tBu pyrpyrr 2 )Fe 2 (μ-N 2 )] (2-N 2 ) with the appropriate chalcogenide transfer source yields cleanly the isostructural ferrous bridging mono-chalcogenide ate complexes [K] 2 [( tBu pyrpyrr 2 )Fe 2 (μ-E)] (2-E) (E = O, S, Se, and Te) having significant deviation in the Fe–E–Fe bridge from linear in the case of E = O to more acute for the heaviest chalcogenide. All bridging chalcogenide complexes were analyzed using a variety of spectroscopic techniques, including 1 H NMR, UV-Vis electronic absorbtion, and 57 Fe Mössbauer. The spin-state and degree of communication between the two ferrous ions were probed via SQUID magnetometry, where it was found that all iron centers were high-spin (S = 2) Fe II , with magnetic exchange coupling between the Fe II ions. Magnetic studies established that antiferromagnetic coupling between the ferrous ions decreases as the identity of the chalcogen is tuned from O to the heaviest congener Te.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Is Ba 3 In 2 O 6 a high- T c superconductor?

It has been suggested that Ba 3 In 2 O 6 might be a high-Tc superconductor. Experimental investigation of the properties of Ba 3 In 2 O 6 was long inhibited by its instability in air. Recently epitaxial Ba 3 In 2 O 6 with a protective capping layer was demonstrated, which finally allows its electronic characterization. The optical bandgap of Ba3In2O6 is determined to be 2.99 eV in-the (001) plane and 2.83 eV along the c-axis direction by spectroscopic ellipsometry. First-principles calculations were carried out, yielding a result in good agreement with the experimental value. Various dopants were explored to induce (super-)conductivity in this otherwise insulating material. Neither A- nor B-site doping proved successful. The underlying reason is predominately the formation of oxygen interstitials as revealed by scanning transmission electron microscopy and first-principles calculations. Additional efforts to induce superconductivity were investigated, including surface alkali doping, optical pumping, and hydrogen reduction. To probe liquid-ion gating, Ba 3 In 2 O 6 was successfully grown epitaxially on an epitaxial SrRuO 3 bottom electrode. So far none of these efforts induced superconductivity in Ba 3 In 2 O 6 , leaving the answer to the initial question of whether Ba 3 In 2 O 6 is a high-T c superconductor to be 'no' thus far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Robustness of electronic screening effects in electron spectroscopies: Example of V 2 O 5

In bulk and low-dimensional extended systems, the screening of excitations by the electron cloud is a key feature governing spectroscopic properties. Widely used computational approaches, especially in the framework of many-body perturbation theory, such as the GW approximation and the resulting approximate Bethe-Salpeter equation, are explicitly formulated in terms of the screened Coulomb interaction. In the present work, we explore the effect of screening in absorption and electron energy loss spectroscopy, concentrating on the effect of local distortions on the screening and elucidating the resulting changes in the various spectra. Using the layered bulk oxide V 2 O 5 as prototype material, we show in which way local distortions affect the screening, and in which way changes in the screening impact electron energy loss and absorption spectra including excitons. We highlight cancellations that make many-body effects in the spectra very robust with respect to structural modifications, while the band structure undergoes significant changes and the nature of the excitations may also be affected. Here, this yields insight concerning the structure-properties relations that are crucial for the use of V 2 O 5 as energy storage material, and more generally, that may be used to optimize the analysis and the calculation of electronic spectra in complex materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT–TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H–C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π–π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm −1 . More importantly, thermally annealed TPT–TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10 −2 cm 2 V −1 s −1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Chemistry↗
DOE OSTI2024

PCET‐Driven Reactivity of Neptunyl(VI) Yields Oxo‐Bridged Np(V) and Np(IV) Species

Two unconventional polynuclear complexes of neptunium (Np) featuring mono-mathematical equation -oxo motifs have been accessed by proton-coupled electron transfer (PCET) reactivity involving the dissolution of neptunyl(VI) diacetate dihydrate (NpO 2 (OAc) 2 (H 2 O) 2 ∙ HOAc) in methanol followed by addition of a pentadentate Schiff-base ligand. One complex is a mixed-valent [Np V ,Np IV , Np V ] trimer with two bridging mathematical equation μ 2 -oxos and the other is a [Np V , Np V ] dimer featuring a single mathematical equation μ 2 -oxo. In both complexes the outer Np centers are capped with terminal oxo ligands. Spectroscopic and spectrokinetic studies aimed at elucidating mechanistic details of complex formation in this system show that intermediate multinuclear [Np V O 2 (OAc)] n species form prior to metal chelation by the ligand; electrolysis experiments demonstrate that production of Np(V) gives rise to asynchronous proton transfer that does not occur otherwise (in the Np(VI) state) as well as condensation with loss of H 2 O and formation of the polynuclear complexes. We attribute the oxo-deficient nature of these products, with respect to conventional actinyl ([AnO 2 ] m+ ) species, to the reduction/condensation reaction sequence of PCET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomically Dispersed Single Ni Site Catalysts for Nitrogen Reduction toward Electrochemical Ammonia Synthesis Using N 2 and H 2 O

Ammonia (NH 3 ) electrosynthesis gains significant attention as NH 3 is essentially important for fertilizer production and fuel utilization. However, electrochemical nitrogen reduction reaction (NRR) remains a great challenge because of low activity and poor selectivity. Herein, a new class of atomically dispersed Ni site electrocatalyst is reported, which exhibits the optimal NH 3 yield of 115 µg cm -2 h -1 at –0.8 V versus reversible hydrogen electrode (RHE) under neutral conditions. High faradic efficiency of 21 ± 1.9% is achieved at -0.2 V versus RHE under alkaline conditions, although the ammonia yield is lower. The Ni sites are stabilized with nitrogen, which is verified by advanced X-ray absorption spectroscopy and electron microscopy. Density functional theory calculations provide insightful understanding on the possible structure of active sites, relevant reaction pathways, and confirm that the Ni-N 3 sites are responsible for the experimentally observed activity and selectivity. Extensive controls strongly suggest that the atomically dispersed NiN 3 site-rich catalyst provides more intrinsically active sites than those in N-doped carbon, instead of possible environmental contamination. Overall, this work further indicates that single-metal site catalysts with optimal nitrogen coordination is very promising for NRR and indeed improves the scaling relationship of transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In-Situ X-Ray Imaging High Strain Rate Compression of Laminate Al-Graphene Composite and Mechanical Property Characterization

Owing to the opaque nature of the laminated structures, traditional high-speed optical camera cannot be used to detect the dynamic process of sub-surface deformation. In this article, we report a study of using high speed X-ray imaging to study the high strain rate deformation in laminated Al structures. We used a Kolsky bar apparatus to apply dynamic compression and a high-speed synchrotron X-ray phase contrast imaging (PCI) setup to conduct the in situ X-ray imaging study. The in situ X-ray imaging captures the shock wave propagation in the laminated structures. After shock compression, we characterized the microstructures by using transmission electron microscopy (TEM), which demonstrates an increase of dislocation density. In conclusion, the micro-pillar compression tests show that the yield strength at 0.2% offset of laminated Al-graphene composite has a significant increase of 67%, from 30 to 50 MPa, compared to laminate Al after shock loading.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of corrosion layer composition and thermal pretreatment on the radiolytic generation of molecular hydrogen from aluminum alloys

To fully evaluate the feasibility of extending the dry storage of aluminum-clad spent nuclear fuel (ASNF) in helium-backfilled cannisters, the amount of radiation-induced molecular hydrogen (H 2 ) generated and the impact of absorbed radiation dose on the ASNF corrosion layer composition must be accurately assessed. Here, in this study, we report a slowing in the rate of radiolytic H 2 generation for pre-corroded AA1100 and AA6061 aluminum alloy coupons irradiated to up to 53 MGy of absorbed cobalt-60 gamma dose. By exploring a variety of thermal pretreatment conditions for AA6061 coupons, we find that the “steady-state” yield of H 2 depends more on the aluminum alloy used than on the treatments applied prior to dry storage. Scanning electron microscopy and positron annihilation lifetime spectroscopy techniques also provided evidence for gamma radiation-induced defects in the corrosion layers of the investigated aluminum alloy coupons for high absorbed doses (~50 MGy), the consequences of which on cladding integrity and H 2 generation should be explored in future works.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2020

Stoichiometry of the Core Determines the Electronic Structure of Core-Shell III-V/II-VI Nanoparticles.

Recently, III-V quantum dots (QDs) emerged as an environmentally friendly alternative to CdSe; however, they exhibit broader emission spectra and inferior photoluminescence quantum yield. Here, we report a computational study of the optoelectronic properties of InxPz and InxGayPz QDs interfaced with zinc chalcogenide shells. Using density functional theory, we show that fine-tuning the composition of the core is critical to achieving narrow emission lines. We show that core-shell nanoparticles, where the core has the same diameter but different stoichiometries, may absorb and emit at different wavelengths, leading to broad absorption and emission spectra. The value of the fundamental gap of the core-shell particles depends on the ratio between the number of group III and P atoms in the core and is maximized for the 1:1 composition. We also show that the interplay between quantum confinement and strain determines the difference in the electronic properties of III-V QDs interfaced with ZnS or ZnSe shells.

Rusishvili, Mariami↗
DOE OSTI2020

Selective bond formation triggered by short optical pulses: quantum dynamics of a four-center ring closure

Here we report bond formation induced by an ultrashort UV pulse. The photochemical process is described by quantum dynamics as coherent electronic and nuclear motions during the ultrashort pulse induced ring closure of norbornadiene to quadricyclane. Norbornadiene consists of two ethylene moieties connected by a rigid (CH 2 ) 3 bridge. Upon photoexcitation, two new sigma bonds are formed, resulting in the closure of a four-atom ring. As a medium-sized polyatomic molecule, norbornadiene exhibits a high density of strongly coupled electronic states from about 6 eV above the ground state. We report on inducing the formation of the new bonds using a short femtosecond UV pulse to pump a non-equilibrium electronic density in the open form that evolves towards the closed ring form. As the coherent electronic-nuclear coupled dynamics unfold, the excited states change character through non-adiabatic interactions and become valence states for the two new C–C bonds of quadricyclane. Our three-dimensional fully quantum dynamical grid simulations during the first 200 fs show that short UV pulses of different polarization initiate markedly different initial non-equilibrium electronic densities that follow different dynamical paths to the S 0 /S 1 conical intersection. They lead to different initial relative yields of quadricyclane, thereby opening the way to controlling bond-making with attopulses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A flexible gyro-fluid system of equations

Gyro-fluid equations are velocity space moments of the gyrokinetic equations. Special gyro-Landau-fluid closures have been developed that include the damping due to kinetic resonances by fitting to the collisionless local plasma response functions. This damping allows for accurate linear eigenmodes to be computed with a relatively low number of velocity space moments compared to the number of velocity quadrature points in gyrokinetic codes. However, none of the published gyro-Landau-fluid closure schemes considers the Onsager symmetries of the resulting quasi-linear fluxes as a constraint. Onsager symmetry guarantees that the matrix of diffusivities is positive definite, an important property for the numerical stability of a transport solver. A two-parameter real closure for improving the accuracy of low-resolution gyro-fluid equations, which preserves the Onsager symmetry and allows higher velocity space moments, is presented in this paper. The new linear gyro-fluid system (GFS) is used to extend the TGLF quasi-linear transport model so that it can compute the energy and momentum fluxes due to parallel magnetic fluctuations, completing the transport matrix. The GFS equations do not use a bounce average approximation. The GFS equations are fully electromagnetic with general flux surface magnetic geometry, pitch angle scattering for electron collisions, and subsonic equilibrium toroidal rotation. Using GFS eigenmodes in the quasi-linear TGLF model will be shown to yield a more accurate match to fluxes computed by CGYRO turbulence simulations. In conclusion, prospects for future applications of a quasi-linear theory to new plasma transport regimes and magnetic confinement devices in addition to tokamaks are opened by the flexibility of the GFS eigensolver.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Gradient nanostructured steel with superior tensile plasticity

Nanostructured metallic materials with abundant high-angle grain boundaries exhibit high strength and good radiation resistance. While the nanoscale grains induce high strength, they also degrade tensile ductility. We show that a gradient nanostructured ferritic steel exhibits simultaneous improvement in yield strength by 36% and uniform elongation by 50% compared to the homogenously structured counterpart. In situ tension studies coupled with electron backscattered diffraction analyses reveal intricate coordinated deformation mechanisms in the gradient structures. The outermost nanolaminate grains sustain a substantial plastic strain via a profound deformation mechanism involving prominent grain reorientation. This synergistic plastic co-deformation process alters the rupture mode in the post-necking regime, thus delaying the onset of fracture. The present discovery highlights the intrinsic plasticity of nanolaminate grains and their significance in simultaneous improvement of strength and tensile ductility of structural metallic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photonuclear Physics in SCALE

Radiation shielding modeling involves a wide range of applications, such as power reactors, critical experiments, portable sources, linear accelerators, and fusion systems. Particle energy ranges vary from thermal energies to fast energy spectra. MAVRIC, as the radiation shielding sequence of the SCALE code system [1] developed and maintained by Oak Ridge National Laboratory, is capable of modeling both neutron and photon interactions in matter and is widely used by the US Nuclear Regulatory Commission, Department of Energy, the National Nuclear Security Administration, and radiation shielding practitioners all around the world. Although most applications don’t involve highly energetic photons that can cause photonuclear reactions and create coupled chains of high energy, ionized electrons and bremsstrahlung radiation within a material medium, when present, these reactions can have a significant impact upon the downstream particle fluxes from incident photons above 20 MeV. For example, linear accelerators used for medical isotope production are examples of applications in which high-energetic photons are generated and used for driving or controlling other components of a complex facility. Radiation shielding analyses of such a facility would require accounting for any and all significant sources of radiation. Unfortunately, MAVRIC included no data and methods to model either photonuclear reactions or the bremsstrahlung photons until this work, which enabled accounting for both. Photonuclear reaction cross sections were imported from the Evaluated Nuclear Data File libraries, and corresponding methods were implemented in the SCALE code system; see Section 2 for how the nuclear data are imported and used. Bremsstrahlung photons were modeled by assuming thick-target approximation whereby all generated electrons and positrons due to photon interactions are assumed to be absorbed within the same material in which they were born, yielding a quick particle transport simulation method by using fast lookup tables for generating subsequent gammas; see Section 4 for details. A suite of verification models was used to test implemented methods and associated data. Tests yielded satisfactory results for the new features. Enhancements will be released as part of the next major SCALE release (v7.0), which is anticipated to be deployed in 2025, with beta releases available in the interim.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

The ezSpectra suite: An easy‐to‐use toolkit for spectroscopy modeling

Abstract A molecule's spectrum encodes information about its structure and electronic properties. It is a unique fingerprint that can serve as a molecular ID. Quantum chemistry calculations provide key ingredients for interpreting spectra, but modeling the spectra rarely ends there; it requires additional steps that entail combined treatments of electronic and nuclear degrees of freedom and account for specifics of the experimental setup (light energy, polarization, averaging over molecular orientations, temperature, etc.). This Software Focus article describes the ezSpectra suite, which currently comprises two stand‐alone open‐source codes: ezFCF and ezDyson . ezFCF calculates Franck–Condon factors, which yield vibrational progressions for polyatomic molecules, within the double‐harmonic approximation. ezDyson calculates absolute cross‐sections for photodetachment/photoionization processes and photoelectron angular distributions using Dyson orbitals computed by a quantum chemistry program. This article is categorized under: Electronic Structure Theory > Ab Initio Electronic Structure Methods Theoretical and Physical Chemistry > Spectroscopy Software > Simulation Methods

Gozem, Samer↗
DOE OSTI2024

Cell-free bioelectrocatalytic platform for carbon dioxide reduction (Final Technical Report)

The University of Minnesota (UMN) EcoSynBio Team aimed to develop a cell-free, enzyme-based platform for the electro- biocatalytic conversion of CO2 into formate as a platform chemical for further upgrading. This type of bio electrocatalytic process delivers a clean product stream without the need for extensive separation from the electrolyte as in electrochemical synthesis and microbial processes. The reduction reaction is catalyzed by metal-dependent formate dehydrogenases (mFDHs) that are capable of efficient electrocatalytic CO2 reduction without the need of costly co-factors. The development of an efficient, scalable electrobiocatalytic process with high total turnover numbers and viable space time yields, however, was not without its challenges. The UM team has developed a protein-based scaffolding system that facilitates enzyme stabilization and attachment to electrodes along with electron transfer. Yet, although FDHs are highly promising enzymes for cell-free, electrobiochemical CO2 reduction, they are also greatly understudied and especially for applications in electrocatalysis. The UM team used the best described mFDH from Clostridium as its benchmark system and spent significant time and effort in attempting to replicate published data and finally, redesigned a recombinant production system for proper metal co-factor incorporation. The UM team has also identified a small set of new enzyme homologs from extreme microorganisms with superior stabilities that have yielded initial structural data for further engineering. In addition, a new bioelectrocatalytic reactor system has been developed that can be 3D printed and used for enzyme attachment to electrodes. In summary the project has generated critical basic information for the further development of this class of enzymes for the electricity driven reduction of CO2 into formate as platform chemical for upgrading into various other chemicals, including fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Single Crystalline GeSe Van Der Waals Ribbons With Uniform Layer Stacking, High Carrier Mobility, and Adjustable Edge Morphology

Abstract Performance of the group IV monochalcogenide GeSe in solar cells, electronic, and optoelectronic devices is expected to improve when high‐quality single crystalline material is used rather than polycrystalline films. Crystalline flakes represent an attractive alternative to bulk single crystals as their synthesis may be developed to be scalable, faster, and with higher overall yield. However, large – and especially large and thin – single crystal flakes are notoriously hard to synthesize. Here it is demonstrated that vapor‐liquid‐solid growth combined with direct lateral vapor‐solid incorporation produces high‐quality single crystalline GeSe ribbons with tens of micrometers size and controllable thickness. Electron microscopy shows that the ribbons exhibit perfect equilibrium (AB) van der Waals stacking order without extended defects across the entire thickness, in contrast to the conventional case of substrate‐supported flakes where material is added via layer‐by‐layer nucleation and growth on the basal plane. Electrical measurements show anisotropic transport and a high Hall mobility of 85 cm 2 V −1 s −1 , on par with the best single crystals to date. Growth from mixed GeSe and SnSe vapors, finally, yields ribbons with unchanged structure and composition but with jagged edges, promising for applications that rely on ample chemically active edge sites, such as catalysis or photocatalysis.

99 GENERAL AND MISCELLANEOUS↗