Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Proof Test Diagrams for a Lithia-Alumina-Silica Glass-Ceramic

The glass-ceramic (Zerodur, Schott Glaswerke, Mainz, Germany) contains 70% to 78% by weight crystalline phase of high-quartz structure with a mean crystal size of 50-55 nm. The vitreous phase has a positive thermal expansion coefficient which is practically balanced by the negative coefficient of the crystalline phase. This results in a material which can maintain longitudinal stability during thermal cycling. This was one of the reasons for its choice as the material for the grazing incidence mirrors for the Chandra X-Ray Facility. Brittle materials such as glass and glass-ceramics which exhibit slow crack growth and subsequent fast fracture to failure exhibit a time dependence in strength. The decrease in strength for a constant applied load is known as static fatigue. In many cases, environment plays a major role in the material lifetime. It has been shown for silicate glasses that crack velocity will increase as the amount of water vapor in the environment surface finish and rate of loading. A rough surface finish leads to a lower tensile strength than for an optically polished surface. The strength of glass is observed in general to increase with increasing load rate. This phenomena is known as dynamic fatigue. This was observed for Zerodur by Tucker and Gent and Tucker in previous dynamic fatigue studies, in which lifetimes were obtained. All of the above named factors need to be considered when glass is to be used in load bearing applications.

Tucker, Dennis S.↗
NASA NTRS1995

High Precision and Real Time Tracking of Low Earth Orbiters With GPS: Case Studies With TOPEX/POSEIDON and EUVE

TOPEX/POSEIDON carries a dual-frequency 6 channel GPS receiver while EUVE has a 12 channel single frequency receiver. Flying at an altitude of 1334 km, TOPEX/POSEIDON performs precise ocean altimetry, which demands the highest possible accuracy in determining the radial orbit component in post-processing. Radial RMS accuracies of about 2 cm were realized using reduced dynamic tracking techniques. In this approach, orbit errors due to force are substantially reduced by exploiting the geometric strength of GPS to solve for a set of stochastic forces. On EUVE, the emphasis was on evaluating real time positioning techniques with a single frequency receiver. The capability for real time 3D accuracies of 15 m in the presence of Selective Availability was shown. This was validated by comparing to a post-processed differential GPS truth orbit believed accurate to about 1 m.!.

Tracking low-Earth orbiters↗
NASA NTRS2012

General Relativistic Simulations of Magnetized Plasmas Around Merging Supermassive Black Holes

Coalescing supermassive black hole binaries are produced by the mergers of galaxies and are the most powerful sources of gravitational waves accessible to space-based gravitational observatories. Some such mergers may occur in the presence of matter and magnetic fields and hence generate an electromagnetic counterpart. In this paper we present the first general relativistic simulations of magnetized plasma around merging supermassive black holes using the general relativistic magnetohydrodynamic code Whisky. By considering different magnetic field strengths, going from non-magnetically dominated to magnetically dominated regimes, we explore how magnetic fields affect the dynamics of the plasma and the possible emission of electromagnetic signals. In particular we observe, total amplification of the magnetic field of approx 2 orders of magnitude which is driven by the accretion onto the binary and that leads to stronger electromagnetic signals than in the force-free regime where such amplifications are not possible.

Giacomazzo, Bruno↗
NASA NTRS2011

Influence of Convection and Aerosol Pollution on Ice Cloud Particle Effective Radius

Satellite observations show that ice cloud effective radius (r(sub e)) increases with ice water content (IWC) but decreases with aerosol optical thickness (AOT). Using least-squares fitting to the observed data, we obtain an analytical formula to describe the variations of r(sub e) with IWC and AOT for several regions with distinct characteristics of r(sub e) -IWC-AOT relationships. As IWC directly relates to convective strength and AOT represents aerosol loading, our empirical formula provides a means to quantify the relative roles of dynamics and aerosols in controlling r(sub e) in different geographical regions, and to establish a framework for parameterization of aerosol effects on r(sub e) in climate models.

Jiang, J. H.↗
NASA NTRS2010

Hypervelocity Impact of Unstressed and Stressed Titanium in a Whipple Configuration in Support of the Orion Crew Exploration Vehicle Service Module Propellant Tanks

Hypervelocity impacts were performed on six unstressed and six stressed titanium coupons with aluminium: shielding in order to assess the effects of the partial penetration damage on the post impact micromechanical properties of titanium and on the residual strength after impact. This work is performed in support of the defInition of the penetration criteria of the propellant and oxidizer tanks dome surfaces for the service module of the crew exploration vehicle where such a criterion is based on testing and analyses rather than on historical precedence. The objective of this work is to assess the effects of applied biaxial stress on the damage dynamics and morphology. The crater statistics revealed minute differences between stressed and unstressed coupon damage. The post impact residual stress analyses showed that the titanium strength properties were generally unchanged for the unstressed coupons when compared with undamaged titanium. However, high localized strains were shown near the craters during the tensile tests.

Nahra, Henry K.↗
NASA NTRS1999

"Ultra"-Fast Fracture Strength of Advanced Structural Ceramic Materials Studied at Elevated Temperatures

The accurate determination of inert strength is important in reliable life prediction of structural ceramic components. At ambient temperature, the inert strength of a brittle material is typically regarded as free of the effects of slow crack growth due to stress corrosion. Therefore, the inert strength can be determined either by eliminating active species, especially moisture, with an appropriate inert medium, or by using a very high test rate. However, at elevated temperatures, the concept or definition of the inert strength of brittle ceramic materials is not clear, since temperature itself is a degrading environment, resulting in strength degradation through slow crack growth and/or creep. Since the mechanism to control strength is rate-dependent viscous flow, the only conceivable way to determine the inert strength at elevated temperatures is to utilize a very fast test rate that either minimizes the time for or eliminates slow crack growth. Few experimental studies have measured the elevated-temperature, inert (or "ultra"-fast fracture) strength of advanced ceramics. At the NASA Lewis Research Center, an experimental study was initiated to better understand the "ultra"-fast fracture strength behavior of advanced ceramics at elevated temperatures. Fourteen advanced ceramics - one alumina, eleven silicon nitrides, and two silicon carbides - have been tested using constant stress-rate (dynamic fatigue) testing in flexure with a series of stress rates including the "ultra"-fast stress rate of 33 000 MPa/sec with digitally controlled test frames. The results for these 14 advanced ceramics indicate that, notwithstanding possible changes in flaw populations as well as flaw configurations because of elevated temperatures, the strength at 33 000 MPa/sec approached the room-temperature strength or reached a higher value than that determined at the conventional test rate of 30 MPa/sec. On the basis of the experimental data, it can be stated that the elevated-temperature, inert strength of an advanced ceramic material can be defined as the strength where no slow crack growth takes place at the temperature.

Choi, Sung R.↗
NASA NTRS1987

Statistics and dynamics of persistent anomalies

Persistent anomalies with recurrent spatial patterns play an important role in the atmosphere's low-frequency variability. A connection between statistical and dynamical methods of description and prediction of persistent anomalies is established by computing and analyzing the empirical orthogonal functions (EOFs) in a simple deterministic model, on the one hand, and in Southern Hemisphere geopotential heights, on the other. The dynamical model is governed by the fully nonlinear, equivalent-barotropic vorticity equation on the sphere, with simplified forcing, dissipation and topography. The Southern Hemisphere data consist in gridded daily maps of 500 mb heights from June 1972 to July 1983. Two types of persistent anomalies appear in this time series, both having a strong wavenumber-three component; they differ by the value of the constant phase of this wave and by the strength of the wavenumber-one component. The first two EOFs bear a striking resemblance to these two patterns. It is concluded that the dynamical interpretation of EOFs is their pointing from the time mean to the most populated regions of the system's phase space. Pursuing this interpretation, a Markov-chain formulation of transitions from one persistent anomaly regime to another is introduced, and the implications for long-range forecasting are discussed.

Mo, Kingtse C.↗
NASA NTRS1983

Fracture toughness/Young's modulus correlation for low-density fibrous silica bodies

Fracture toughness and static Young's modulus were measured for the low-density silic fiber materials used as tiles in the thermal protection system of the Space Shuttle. The fracture behavior was found to be in excellent agreement with a previously formulated micromechanical model and allowed both (density) classes of tile material to be correlated to a single function. A similar correlation was also found between strength and Young's modulus, which is the basis of a nondestructive evaluation test for these materials. It was shown that the value of Young's modulus determined from a dynamic test can be substantially greater than that determined in a static mechanical test. This effect must be taken into account in the correlation. Finally, it was also determined that these materials have significant variations in Kc, both within and between production units, so that the strength variability in these materials is dependent on both fracture toughness and flaw-size variations.

Green, D. J.↗
DOE OSTI2025

Modeling and verification of dynamic field ionization for laser-target interactions

Integrating field ionization models into kinetic plasma simulations is required for a variety of applications, especially when field strengths vary from low to high regimes, such as in laser-target interactions. The introduction of new physics models into kinetic codes requires a rigorous verification of their accuracy through well-defined verification problems. In this work, the field ionization model that has been included in the kinetic plasma code VPIC is presented, along with the detailed approach adopted for its integration. This model includes a comprehensive range of field ionization mechanisms: multiphoton ionization, tunneling ionization, and barrier suppression ionization. New verification problems employed to evaluate the ionization model's fidelity are outlined, and the simulation parameters that affect the accuracy of simulation results are explored. Additionally, this work addresses the impact of field ionization on computational performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Dynamical friction in self-interacting ultralight dark matter

Here, we explore how dynamical friction in an ultralight dark matter (ULDM) background is affected by dark matter self-interactions. We calculate the force of dynamical friction on a point mass moving through a uniform ULDM background with self-interactions, finding that the force of dynamical friction vanishes for sufficiently strong repulsive self-interactions. Using the pseudospectral solver ultraDark.jl, we show with simulations that reasonable values of the ULDM self-interaction strength and particle mass cause $\mathcal{O}$(1) differences in the acceleration of an object like a supermassive black hole (SMBH) traveling near the center of a soliton, relative to the case with no self-interactions. For example, repulsive self-interactions with λ=10 -90 yield a deceleration due to dynamical friction ≈ 70% smaller than a model with no self-interactions. We discuss the observational implications of our results for SMBHs near soliton centers and for massive satellite galaxies falling into ultralight axion halos and show that outcomes are dependent on whether a self-interaction is present or not.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Dynamic Properties of FeCrMnNi, a High Entropy Alloy

High entropy alloys (HEAs) represent a new class of materials that potentially possess an ideal combination of high strength and ductility and may be candidate materials that can withstand high amounts of damage before failure, especially under extreme conditions. To this end, a series of shock/spall loading experiments were conducted on an Fe/Cr/Mn/Ni HEA to assess not only its equation of state (EOS) but also its resistance to damage and failure. A single-stage light gas gun was used to conduct a series of flyer plate symmetric impact experiments coupled with recovery of the samples for post-mortem microstructural analysis to obtain fundamental understanding regarding the damage morphology. Our results show that the measured EOS for this alloy was in reasonable agreement with an estimated Hugoniot value. Additionally, the spall strength of these alloys was found to vary between 1.4 and 1.9 GPa within the same plate but was comparable to other iron-based conventional alloys. DOE/NV/03624--1059

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nonequilibrium DMFT + CPA for correlated disordered systems

We present a solution for the nonequilibrium dynamics of an interacting disordered system. The approach adapts the combination of the equilibrium dynamical mean-field theory and the equilibrium coherent potential approximation methods to the nonequilibrium many-body formalism, using the Kadanoff-Baym-Keldysh complex time contour, for the dynamics of interacting disordered systems away from equilibrium. We use our time domain solution to obtain the equilibrium density of states of the disordered interacting system described by the Anderson-Hubbard model, bypassing the necessity for the cumbersome analytical continuation process. We further apply the nonequilibrium solution to the interaction quench problem for an isolated disordered system. Here, the interaction is abruptly changed from zero (noninteracting system) to another constant (finite) value at which it is subsequently kept. We observe via the time dependence of the potential, kinetic, and total energies the effect of disorder on the relaxation of the system as a function of final interaction strength. Finally, the real-time approach has the potential to shed light on the fundamental role of disorder in the nonequilibrium dynamics of interacting quantum systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Dynamic properties of FeCrMnNi, a high entropy alloy

The goal of this paper was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were performed on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and its spall strength, which is a measure of the stress required to nucleate voids under shock loading conditions. While there has been a plethora of work performed to assess the mechanical properties of these HEAs under uniaxial stress conditions as a function of strain rate, investigation of its properties in dynamic extremes remains rare. The current work fills this gap in knowledge for this novel class of materials. Our results show that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, while the spall strength for this material was found to be ~1.9 GPa, with some variation based on sample location, the main failure mode was brittle. This brittle failure leading to formation of cracks in the material is different than the ductile failure observed in pure iron and its alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic properties of FeCrMnNi, a High Entropy Alloy

The goal of this paper was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were performed on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and its spall strength, which is a measure of the stress required to nucleate voids under shock loading conditions. While there has been a plethora of work performed to assess the mechanical properties of these HEAs under uniaxial stress conditions as a function of strain rate, investigation of its properties in dynamic extremes remains rare. The current work fills this gap in knowledge for this novel class of materials. Our results show that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, while the spall strength for this material was found to be ~1.9 GPa, with some variation based on sample location, the main failure mode wasbrittle. This brittle failure leading to formation of cracks in the material is different than the ductile failure observed in pure iron and its alloys. DOE/NV/03624--1298

36 MATERIALS SCIENCE↗
NASA NTRS2014

Integration of the Total Lightning Jump Algorithm into Current Operational Warning Environment Conceptual Models

The presence and rates of total lightning are both correlated to and physically dependent upon storm updraft strength, mixed phase precipitation volume and the size of the charging zone. The updraft modulates the ingredients necessary for electrification within a thunderstorm, while the updraft also plays a critical role in the development of severe and hazardous weather. Therefore utilizing this relationship, the monitoring of lightning rates and jumps provides an additional piece of information on the evolution of a thunderstorm, more often than not, at higher temporal resolution than current operational radar systems. This correlation is the basis for the total lightning jump algorithm that has been developed in recent years. Currently, the lightning jump algorithm is being tested in two separate but important efforts. Schultz et al. (2014; AMS 10th Satellite Symposium) is exploring the transition of the algorithm from its research based formulation to a fully objective algorithm that includes storm tracking, Geostationary Lightning Mapper (GLM) Proxy data and the lightning jump algorithm. Chronis et al. (2014; this conference) provides context for the transition to current operational forecasting using lightning mapping array based products. However, what remains is an end to end physical and dynamical basis for relating lightning rates to severe storm manifestation, so the forecaster has a reason beyond simple correlation to utilize the lightning jump algorithm within their severe storm conceptual models. Therefore, the physical basis for the lightning jump algorithm in relation to severe storm dynamics and microphysics is a key component that must be further explored. Many radar studies have examined flash rates and their relation to updraft strength, updraft volume, precipitation‐sized ice mass, etc.; however, relation specifically to lightning jumps is fragmented within the literature. Thus the goal of this study is to use multiple Doppler techniques to resolve the physical and dynamical storm characteristics specifically around the time of the lightning jump. This information will help forecasters anticipate lightning jump occurrence, or even be of use to determine future characteristics of a given storm (e.g., development of a mesocyclone, downdraft, or hail signature on radar), providing additional lead time/confidence in the severe storm warning paradigm.

Shultz, Christopher J.↗
DOE OSTI2024

Effect of helium bubbles on the mobility of edge dislocations in copper

Abstract Helium bubbles can form in materials upon exposure to irradiation. It is well known that the presence of helium bubbles can cause changes in the mechanical behavior of materials. To improve the lifetime of nuclear components, it is important to understand deformation mechanisms in helium-containing materials. In this work, we investigate the interactions between edge dislocations and helium bubbles in copper using molecular dynamics (MD) simulations. We focus on the effect of helium bubble pressure (equivalently, the helium-to-vacancy ratio) on the obstacle strength of helium bubbles and their interaction with dislocations. Our simulations predict significant differences in the interaction mechanisms as a function of helium bubble pressure. Specifically, bubbles with high internal pressure are found to exhibit weaker obstacle strength as compared to low-pressure bubbles of the same size due to the formation of super-jogs in the dislocation. Activation energies and rate constants extracted from the MD data confirm this transition in mechanism and enable upscaling of these phenomena to higher length-scale models.

36 MATERIALS SCIENCE↗
NASA NTRS2014

Understanding the Effects of Long-duration Space Flight on Astronant Functional Task Performance

Space flight is known to cause alterations in multiple physiological systems including changes in sensorimotor, cardiovascular, and neuromuscular systems. These physiological changes cause balance, gait and visual disturbances, cardiovascular deconditioning, and loss of muscle mass and strength. These changes may affect a crewmember's ability to perform critical mission tasks immediately after landing on a planetary surface. To understand how changes in physiological function affect functional performance, an interdisciplinary pre- and postflight testing regimen, Functional Task Test (FTT), was developed to systematically evaluate both astronaut functional performance and related physiological changes. Ultimately this information will be used to assess performance risks and inform the design of countermeasures for exploration class missions. We are currently conducting the FTT study on International Space Station (ISS) crewmembers before and after 6-month expeditions. Additionally, in a corresponding study we are using the FTT protocol on subjects before and after 70 days of 6deg head-down bed-rest as an analog for space flight. Bed-rest provides the opportunity for us to investigate the role of prolonged axial body unloading in isolation from the other physiological effects produced by exposure to the microgravity environment of space flight. Therefore, the bed rest analog allows us to investigate the impact of body unloading on both functional tasks and on the underlying physiological factors that lead to decrement in performance and then compare them with the results obtained in our space flight study. Functional tests included ladder climbing, hatch opening, jump down, manual manipulation of objects and tool use, seat egress and obstacle avoidance, recovery from a fall and object translation tasks. Physiological measures included assessments of postural and gait control, dynamic visual acuity, fine motor control, plasma volume, heart rate, blood pressure, orthostatic intolerance, upper- and lower-body muscle strength, power, endurance, control, and neuromuscular drive. ISS crewmembers were tested three times before flight, and on 1, 6, and 30 days after landing. Bed-rest subjects were tested three times before bed-rest and immediately after getting up from bed-rest as well as 1, 6, and 12 days after reambulation.

Bloomberg, Jacob J.↗
NASA NTRS1991

Use of satellite data and modeling to assess the influence of stratospheric processes on the troposphere

Over the past forty years, numerous linear stability studies have been performed in order to explain the origin and structure of observed waves in the atmosphere. Of these studies, only a small fraction have considered the stability of time-dependent, zonally varying flow or the influence of radiative-photochemical feedbacks on the stability of zonally uniform flow. The stability of such flows is described, and these flows may yield important information concerning the origin, structure, and transient time scales of free waves in the atmosphere. During the period 1990 to 1991, a beta-plane model that couples radiative transfer, ozone advection, and ozone photochemistry with the quasigeostrophic dynamical circulation was developed in order to study the diabatic effects of Newtonian cooling and ozone-dynamics interaction on the linear stability of free planetary waves in the atmosphere. The stability of a basic state consisting of a westward-moving wave and a zonal mean jet was examined using a linearized, nondivergent barotropic model on sphere. The sensitivity of the stability of the flow to the strength and structure of the zonal jet was emphasized. The current research is focused on the following problems: (1) examination of the finite amplitude interactions among radiation, ozone, and dynamics; and (2) examination of the role of seasonal forcing in short-term climate variability. The plans for next year are presented.

Nathan, Terrence↗