Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drawing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Diffusion tensor imaging of the kidney in healthy controls and in children and young adults with autosomal recessive polycystic kidney disease

Objective: To compare diffusion tensor imaging (DTI) of the kidneys and its derived parameters in children with autosomal recessive polycystic kidney disease (ARPKD) versus healthy controls. Methods: In a prospective IRB-approved study, we evaluated the use of DTI to compare kidney parenchyma FA values in healthy controls (age-matched children with no history of renal disease) versus patients with ARPKD. A 20-direction DTI with b-values of b = 0 s/mm{sup 2} and b = 400 s/mm{sup 2} was used to acquire data in coronal direction using a fat-suppressed spin-echo echo-planar sequence. Diffusion Toolkit and TrackVis were used for analysis and segmentation. TrackVis was used to draw regions of interest (ROIs) covering the entire volume of the renal parenchyma, excluding the collecting system. Fibers were reconstructed using a deterministic fiber tracking algorithm. The FA values based on the ROI data, mean length, and volume of the tracks based on the fiber tracking data were recorded. Results: Eight healthy controls (mean age = 12.9 years ± 4.0; 1/8 males) and six ARPKD participants (mean age = 13.8 years ± 8.5; 5/6 males) were included in the study. Compared to healthy controls, patients with ARPKD had significantly lower FA values (0.33 ± 0.03 vs. 0.25 ± 0.02, p = 0.002) and mean track length (16.73 ± 3.43 vs. 11.61 ± 1.29 mm, p = 0.005). Conclusion: DTI of the kidneys shows significantly lower FA values and mean track length in children and young adults with ARPKD compared to normal subjects. DTI of the kidney offers a novel approach for characterizing renal disease based on changes in diffusion anisotropy and kidney structure.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

R2 relaxometry based MR imaging for estimation of liver iron content: A comparison between two methods

Purpose: To compare the reproducibility and accuracy of R2-relaxometry MRI for estimation of liver iron concentration (LIC) between in-house analysis and FDA-approved commercially available third party results. Methods: All MR studies were performed on a 1.5T scanner. Multi-echo spin-echo scans with a fixed TR and increasing TE values of 6 ms, 9 ms, 12 ms, 15 ms, and 18 ms (spaced at 3 ms intervals) were used. Post-processing of the images to calculate mean relaxivity, R2, included drawing of regions of interest to include the whole liver on mid-slice. The relationship between liver R2 values and estimated LIC calculated with in-house analysis and values reported by an external company (FerriScan{sup ®}, Resonance Health, Australia) were assessed with correlation coefficients and Bland–Altman difference plots. Continuous variables are presented as mean ± standard deviation. Significance was set at p value < 0.05. Results: 474 studies from 175 patients were included in the study (mean age 10.4 ± 4.2 years (range 1–18 years); 254 studies from girls, 220 studies from boys). LIC ranged from 0.6 to 43 mg/g dry tissue, covering a broad range from normal levels to extremely high iron levels. Linearity between proprietary and in-house methods was excellent across the observed range for R2 (31.5 to 334.8 s{sup −1}); showing a correlation coefficient of r = 0.87, p < 0.001. Bland–Altman R2 difference plot between the two methods shows a mean bias of + 21.5 s{sup −1} (range − 47.0 to + 90.0 s{sup −1} between two standard deviations). LIC reported by FerriScan{sup ®} compared with LIC estimated in-house with R2 as reported by FerriScan{sup ®} agreed strongly, (r = 1.0, p < 0.001). Conclusion: R2 relaxometry MR imaging for liver iron concentration estimation is reproducible between proprietary FDA-approved commercial software and in-house analysis methods.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Delayed Development of Pneumothorax After Pulmonary Radiofrequency Ablation

Acute pneumothorax is a frequent complication after percutaneous pulmonary radiofrequency (RF) ablation. In this study we present three cases showing delayed development of pneumothorax after pulmonary RF ablation in 34 patients. Our purpose is to draw attention to this delayed complication and to propose a possible approach to avoid this major complication. These three cases occurred subsequent to 44 CT-guided pulmonary RF ablation procedures (6.8%) using either internally cooled or multitined expandable RF electrodes. In two patients, the pneumothorax, being initially absent at the end of the intervention, developed without symptoms. One of these patients required chest drain placement 32 h after RF ablation, and in the second patient therapy remained conservative. In the third patient, a slight pneumothorax at the end of the intervention gradually increased and led into tension pneumothorax 5 days after ablation procedure. Underlying bronchopleural fistula along the coagulated former electrode track was diagnosed in two patients. In conclusion, delayed development of pneumothorax after pulmonary RF ablation can occur and is probably due to underlying bronchopleural fistula, potentially leading to tension pneumothorax. Patients and interventionalists should be prepared for delayed onset of this complication, and extensive track ablation following pulmonary RF ablation should be avoided.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Postpartum Hemorrhage Resulting from Pelvic Pseudoaneurysm: A Retrospective Analysis of 588 Consecutive Cases Treated by Arterial Embolization

Objective: This study was designed to determine the incidence of arterial pseudoaneurysm in patients presenting with postpartum hemorrhage (PPH), to analyze the angiographic characteristics of pseudoaneurysms that cause PPH, and to evaluate the effectiveness of pelvic arterial embolization for the treatment of this condition. Study design: Eighteen women with pelvic arterial pseudoaneurysm were retrieved from a series of 588 consecutive patients with PPH treated by arterial embolization. Clinical files, angiographic examinations, and procedure details were reviewed. Results: The incidence of pseudoaneurysm was 3.06 % (18/588; 95 % confidence interval (CI): 1.82–4.8 %). A total of 20 pseudoaneurysms were found; 15/20 (75 %) were located on the uterine arteries. Angiography revealed extravasation of contrast material from pseudoaneurysm indicating rupture in 9 of 18 (50 %) patients. Arterial embolization was performed using gelatin sponge alone in 12 of 18 (67 %) patients or in association with metallic coils in 5 of 18 (28 %) patients or n-butyl-2-cyanoacrylate in 1 of 18 (6 %) patients. Arterial embolization allowed controlling the bleeding in all patients after one or two embolization sessions in 17 of 18 (94 %) and 1 of 18 patients (6 %) respectively, without complications, obviating the need for further surgery. Conclusions: Pseudoaneurysm is rarely associated with PPH. Arterial embolization is an effective and safe procedure for the treatment of PPH due to uterine or vaginal artery pseudoaneurysm. Our results suggest that gelatin sponge is effective for the treatment of ruptured pseudoaneurysms, although we agree that our series does not contain sufficient material to allow drawing definitive conclusions with respect to the most effective embolic material.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Aspirex Thrombectomy in Occluded Dialysis Access: A Retrospective Study

PurposeThis study is the first to present the outcomes of the Straub Aspirex device for the salvage of occluded renal dialysis access fistulae.Materials and MethodsThis is a retrospective study, using data from the Renal Unit and Radiology Department database. It included all the patients between 2010 and 2014 who underwent percutaneous mechanical thrombectomy (PMT) treated by JD. Aspirex is an over-the-wire, 6–10 French catheter within which is a rapidly rotating helix which draws thrombus into a window near the tip which it then macerates and removes. Access survival was assessed using the Kaplan–Meier method, and multi-variant analysis was performed using the Cox proportional hazards model. Significance was considered if p < 0.05.ResultsA total of 27 procedures were performed for 19 patients. 13 had autologous arterio-venous fistulae, and 14 had synthetic (PTFE) arterio-venous grafts. 15 were males, 4 females. 100 % of the patients successfully had a channel of thrombus removed. This resulted in an 81.5 % initial clinical success, with primary patency rates of 53.6, 44.3 and 33 % by days 30, 90 and 480, respectively, without significant difference of any analysed covariates. No major complication (pulmonary embolus, paradoxical cerebral infarction, limb ischaemia or significant haemorrhage) occurred.ConclusionAspirex has rates of patency and complication similar to other PMT devices. No covariant studied affected outcome.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Percutaneous Cementoplasty for Kienbock’s Disease

Kienböck disease typically presents with wrist pain, swelling, restricted range of motion, and difficulty in performing activities of daily living. Because the etiology and evolution of disease remain unclear, broad ranges of treatments have been designed. Percutaneous cementoplasty is expanding its role for managing painful bone metastases outside the spine. We can draw a parallel between lytic tumoral lesions and Kienbock’s disease. Increasing the strength and rigidity of lunate with cementoplasty can prevent it from collapse, relieve the symptoms associated with the process of avascular necrosis, and increase the wrist range of motion. We report the case of 30-year-old man with a painful stage IIIA Kienböck disease who underwent percutaneous cementoplasty and experienced immediate effective pain relief and recovery of wrist mobility.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

On the nonlinearity of spatial scales in extreme weather attribution statements

In the context of continuing climate change, extreme weather events are drawing increasing attention from the public and news media. A question often asked is how the likelihood of extremes might have changed by anthropogenic greenhouse-gas emissions. Answers to the question are strongly influenced by the model used, duration, spatial extent, and geographic location of the event—some of these factors often overlooked. Using output from four global climate models, we provide attribution statements characterised by a change in probability of occurrence due to anthropogenic greenhouse-gas emissions, for rainfall and temperature extremes occurring at seven discretised spatial scales and three temporal scales. An understanding of the sensitivity of attribution statements to a range of spatial and temporal scales of extremes allows for the scaling of attribution statements, rendering them relevant to other extremes having similar but non-identical characteristics. This is a procedure simple enough to approximate timely estimates of the anthropogenic contribution to the event probability. Furthermore, since real extremes do not have well-defined physical borders, scaling can help quantify uncertainty around attribution results due to uncertainty around the event definition. Results suggest that the sensitivity of attribution statements to spatial scale is similar across models and that the sensitivity of attribution statements to the model used is often greater than the sensitivity to a doubling or halving of the spatial scale of the event. The use of a range of spatial scales allows us to identify a nonlinear relationship between the spatial scale of the event studied and the attribution statement.

54 ENVIRONMENTAL SCIENCES↗

The role of interannual ENSO events in decadal timescale transitions of the Interdecadal Pacific Oscillation

The build-up of decadal timescale upper ocean heat content in the off-equatorial western tropical Pacific can provide necessary conditions for interannual El Niño/Southern Oscillation (ENSO) events to contribute to decadal timescale transitions of tropical Pacific SSTs to the opposite phase of the Interdecadal Pacific Oscillation (IPO). This can be viewed as a corollary to subseasonal westerly wind burst events contributing to El Niño interannual timescale transitions. In this work, a long pre-industrial control run with CESM1 is analyzed to show that there is a greater chance of ENSO activity to contribute to an IPO transition when off-equatorial western Pacific Ocean heat content reaches either a maximum (for El Niño to contribute to a transition to positive IPO) or minimum (for La Niña to contribute to a transition to negative IPO) as seen in observations. If above a necessary ocean heat content threshold, the convergence associated with westerly anomaly near-equatorial surface winds associated with El Niño activity can draw that heat content equatorward to sustain anomalously warm western and central Pacific SSTs. These are associated with positive precipitation and convective heating anomalies, a Gill-type response and wind stress curl anomalies that continue to feed warm water into the near-equatorial western Pacific. These conditions then sustain the decadal-timescale transition to positive IPO (with the opposite sign for transition to negative IPO). Associated central equatorial Pacific convective heating anomalies produce SLP and wind stress anomalies in the North and South Pacific that can excite westward-propagating off-equatorial oceanic Rossby waves to contribute to the western Pacific thermocline depth and consequent heat content anomalies.

54 ENVIRONMENTAL SCIENCES↗

Little vertical and circumferential variations in stem xylem water Δ 2 H and Δ 18 O in three tree species

Vertical and circumferential patterns of xylem water isotope signatures in large trees are rarely characterized but may influence interpretation of water source investigations and soil/xylem water isotope offsets. Furthermore, to examine vertical and circumferential variation in xylem water δ 2 H and δ 18 O, we collected xylem tissue at 5 heights (0, 1, 4, 7 and 10 m) from three replicate trees of three species with contrasting xylem anatomy, two angiosperms (Liquidambar styraciflua and Quercus nigra) and one gymnosperm (Pinus taeda). Concurrently, we also determined δ 2 H and δ 18 O of groundwater, soil water, and recent precipitation. On a different day, we collected circumferential samples at 1 m from the same trees to test for sectorality effects. Water from stem and soil samples were cryogenically extracted and analyzed for δ 2 H and δ 18 O. Mean xylem water δ 2 H and δ 18 O were significantly different between species, both vertically and circumferentially. We did not find significant (p = 0.05) systematic variation in δ 2 H or δ 18 O with height. We found no significant evidence for sectorality effects on δ 2 H, δ 18 O. Variances of vertical synoptic xylem water δ 2 H or δ 18 O were similar between species, 7.2–10.4‰ for δ 2 H and 0.58–0.81‰ for δ 18 O. Circumferential variances were also similar between species, 4.0–6.0 for δ 2 H and 0.37–0.44 for δ 18 O. A mixing model showed that sweetgum, water oak and loblolly pine, were drawing most of their water from deep soil from 45 to 190 cm (84.7, 68.4 and 53.2%, respectively) however, soil water-excess values indicate δ 2 H fractionation effects on these estimates. Dual isotope mixing model evaluation with single and multiple sample configurations showed that source water estimates were not affected by within tree variability of xylem water signatures. Xylem water δ 2 H and δ 18 O variability with height or circumference, was 3.2 and 2.7 times less than between tree variation because of transient temporal and spatial processes and is, therefore, not likely to affect interpretations of water sourcing in these three species.

59 BASIC BIOLOGICAL SCIENCES↗

Benchmark of the No-Core Monte Carlo Shell Model in Light Nuclei

We report the benchmark comparison of the properties in light nuclei among the Monte Carlo Shell Model, Full Configuration Interaction and No Core Full Configuration approaches. For this benchmark process, we compare results for the energies of 9 states from helium-4 to carbon-12 that includes 7 ground states and 2 excited states. The JISP16 NN interaction is adopted. The Coulomb and all other interactions are neglected. The contributions of spurious center-of-mass excitation are not discussed here. The basis space is truncated by the cutoff of the single-particle basis space, N shell . We select the optimal $\hbar$ω that minimizes the energy for that state and basis space cutoff. The MCSM results are obtained by exploiting the recent development in the computation of two-body matrix elements between non-orthogonal Slater determinants and technique of the energy-variance extrapolation. All results are found to be consistent with each other to within quoted uncertainties when they could be quantified. As an exploratory attempt, we also demonstrate how to draw the intrinsic density from no-core MCSM wave functions by taking the 8 Be ground state as an example.

Physics↗

Examination of Mean Stress Calculation Approaches in Rock Mechanics

The mean stress, as a fundamental statistical property of a group of stress data, is essential for stress variability characterisation. However, currently in rock mechanics, the mean stress is customarily and erroneously calculated by separately averaging the principal stress magnitudes and orientations. In order to draw the attention of our community to the appropriate approach for stress variability characterisation, here we compare the customary scalar/vector mean with that obtained by the mathematically rigorous tensorial approach—the Euclidean mean. Calculation of mean stress using both a small group of actual in situ stress measurement results and a large group of simulated stress data (obtained using the combined finite– discrete element method, FEMDEM) demonstrates that the two approaches yield different results. Further investigation of these results shows that the scalar/vector approach may yield non-unique and non-orthogonal mean principal stresses, and these may deviate significantly from those of the Euclidean mean. Our calculations and comparisons reveal that the scalar/ vector approach is deficient because it processes the principal stress magnitudes and orientations separately as independent quantities and ignores the connection between them. Conversely, the tensorial approach appropriately averages the tensors that simultaneously carry not only the information of stress magnitudes and orientations, but also the inherent relations between them. Therefore, arbitrarily using scalar/vector mean stress of in situ stress measurements as input in further rock engineering analyses may yield significantly erroneous results. Finally, we advise that stress data should be statistically processed in a tensorial manner using tensors referred to a common Cartesian coordinate system.

58 GEOSCIENCES↗

Correcting evaluation bias of relational classifiers with network cross validation

Recently, a number of modeling techniques have been developed for data mining and machine learning in relational and network domains where the instances are not independent and identically distributed (i.i.d.). These methods specifically exploit the statistical dependencies among instances in order to improve classification accuracy. However, there has been little focus on how these same dependencies affect our ability to draw accurate conclusions about the performance of the models. More specifically, the complex link structure and attribute dependencies in relational data violate the assumptions of many conventional statistical tests and make it difficult to use these tests to assess the models in an unbiased manner. In this work, we examine the task of within-network classification and the question of whether two algorithms will learn models that will result in significantly different levels of performance. We show that the commonly used form of evaluation (paired t-test on overlapping network samples) can result in an unacceptable level of Type I error. Furthermore, we show that Type I error increases as (1) the correlation among instances increases and (2) the size of the evaluation set increases (i.e., the proportion of labeled nodes in the network decreases). Lastly, we propose a method for network cross-validation that combined with paired t-tests produces more acceptable levels of Type I error while still providing reasonable levels of statistical power (i.e., 1–Type II error).

97 MATHEMATICS AND COMPUTING↗

CONV-3D Code Application for CFD-Modeling of Lead-Bismuth Coolant

The results of testing the three-dimensional CFD-code on problems very close to real processes for lead–bismuth eutectic are presented: flow in a 19-fuel element assembly with three spacing lattices and convection in the ‘tumbler’ model. The results of convergence on a sequence of grids permit drawing the conclusion that for a 19-fuel element assembly the error in the calculation of the friction coefficient on a more finely divided grid does not exceed 10% with two-fold smaller grid step in each direction. Similar arguments are valid for the calculation of the hydraulic resistance coefficient.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Aspirations and common tensions: larger lessons from the third US national climate assessment

The Third US National Climate Assessment (NCA3) was produced by experts in response to the US Global Change Research Act of 1990. Based on lessons learned from previous domestic and international assessments, the NCA3 was designed to speak to a broad public and inform the concerns of policy- and decision-makers at different scales. The NCA3 was also intended to be the first step in an ongoing assessment process that would build the nation’s capacity to respond to climate change. This concluding paper draws larger lessons from the insights gained throughout the assessment process that are of significance to future US and international assessment designers. We bring attention to process and products delivered, communication and engagement efforts, and how they contributed to the sustained assessment. Based on areas where expectations were exceeded or not fully met, we address four common tensions that all assessment designers must confront and manage: between (1) core assessment ingredients (knowledge base, institutional set-up, principled process, and the people involved), (2) national scope and subnational adaptive management information needs, (3) scope, complexity, and manageability, and (4) deliberate evaluation and ongoing learning approaches. Managing these tensions, amidst the social and political contexts in which assessments are conducted, is critical to ensure that assessments are feasible and productive, while its outcomes are perceived as credible, salient, and legitimate.

Moser, Susanne C.↗

Photoluminescence of Gallium Phosphide-Based Nanostructures with Germanium Quantum Dots, Grown by Liquid-Phase Epitaxy

We have used liquid-phase epitaxy with pulsed substrate cooling using two structural designs to grow samples of nanoheteroepitaxial structures with Ge quantum dots in a GaP matrix on Si substrates. We have measured the photoluminescence spectra of the samples at temperatures of 77 K and 300 K with excitation by laser emission at λ = 4880 Å and 5145 Å. We draw conclusions concerning the factors influencing the spectrum and intensity of emission for nanostructures with quantum dots. It was found that in order to reduce nonradiative recombination in multilayer p–n structures, we need to create quantum dot arrays inside p and n regions rather than in the central portion of the depletion layer of the p–n junction. We show that the theoretical energies for Ge quantum dots of the calculated sizes are comparable with the energies of their photoluminescence maxima.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rheological Behaviour, Mechanical Properties and Processability of Biodegradable Polymer Systems for Film Blowing

Films for agricultural or packaging applications are typically made of low density polyethylene (LDPE). They are produced through the film blowing process, which requires the use of polymers with suitable rheological properties. Furthermore, the short shelf-life which is often related to many packed products leads to huge amounts of plastic-based wastes. This suggests the use of biodegradable and/or compostable polymers in replacement for traditional ones. To this regard, only few data exist on the rheological properties of biodegradable polymers undergoing film blowing processing. In this work, a detailed investigation on the rheological, mechanical and processability behaviour of some biodegradable polymers (originating from MaterBi{sup ®} and Bioflex{sup ®} commercial groups) was carried out, in order to assess their suitability to industrial-scale film blowing by direct comparison with a traditional non-biodegradable polymer (LDPE). Rheological tests under shear and non-isothermal elongational flow allowed to find out the two most suitable polymer grades. The film blowing production operations at different draw and blow-up ratios (from 2.5 to 3.5) showed that the two samples are suitable for industrial scale operations. Results from tensile and impact tests indicated that the two selected polymers exhibit significantly different mechanical properties (up to 10–15%).

36 MATERIALS SCIENCE↗

Wetting Transition of Nonpolar Neutral Molecule System on a Neutral and Atomic Length Scale Roughness Substrate

One recently proposed new method for accurately determining wetting temperature is applied to the wetting transition occurring in a single component nonpolar neutral molecule system near a neutral planar substrate with roughness produced by cosinusoidal modulation(s). New observations are summarized into five points: (i) for a planar substrate superimposed with one cosinusoidal modulation, with increasing of the periodicity length or the surface attraction force field, or decreasing of the amplitude, wetting temperature T{sub W} drops accordingly and the three parameters show multiplication effect; moreover, both the periodicity length and amplitude effect curves display pole phenomena and saturation phenomena, and the T{sub W} saturation occurs at small (for case of large amplitude) or large (for case of small amplitude) periodicity length side, respectively. (ii) In the case of the planar substrate superimposed with two cosinusoidal modulations with equal periodicity length, the initial phase difference is critical issue that influences the T{sub W}, which decreases with the initial phase difference. (iii) In the case of the planar substrate superimposed with two cosinusoidal modulations with zero phase difference, change of the T{sub W} with one periodicity length under the condition of another periodicity length unchanged is non-monotonous. (iv) When the parameters are chosen such that the T{sub W} draws ever closer to the bulk critical temperature, wetting transition on the roughness substrate eventually does not occur. (v) The present microscopic calculation challenges traditional macroscopic theory by confirming that the atomic length scale roughness always renders the surface less hydrophilic and whereas the mesoscopical roughness renders the surface more hydrophilic. All of these observations summarized can be reasonably explained by the relative strength of the attraction actually enjoyed by the surface gas molecules to the attraction the gas molecules can get when in bulk.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advancing nuclear forensics competencies at the National Nuclear Center of the Republic of Kazakhstan and conceptual development of a National Nuclear Forensics Library

Since 2021, the National Nuclear Center (NNC) of the Republic of Kazakhstan has been successfully developing a project dedicated to nuclear forensics. The relevance of this project is underscored by Kazakhstan’s leading position in the global uranium mining and export market. The country operates research reactors and is involved in the production of experimental nuclear fuel. The nuclear forensics project is being implemented in several key areas: the project will develop competencies in laboratory research of samples, interpretation of results, and develop a prototype concept for the National Nuclear Forensics Library. In implementing these challenges, the NNC experts draw on the experience of colleagues from world-leading scientific and research centers. Designing a prototype National Nuclear Forensics Library (NNFL) is a challenging project. In conclusion, the solution to this task is based on the IAEA’s approaches, recommendations, and the experience gained from the construction of similar systems in other countries.

and nuclear chemistry↗