Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffractive optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Identify the Limits of Geometric Optics Ray Tracing by Numerically Solving the Vector Kirchhoff Integral

The properties of a pencil of light as defined approximately in the geometric optics ray tracing method are investigated. The vector Kirchhoff integral is utilized to accurately compute the electromagnetic near field in and around the pencil of light with various beam base sizes, shapes, propagation directions and medium refractive indices. If a pencil of light has geometric mean cross section size of the order p times the wavelength, it can propagate independently to a distance p2 times the wavelength, where most of the beam energy diffuses out of the beam region. This is consistent with a statement that van de Hulst made in a classical text on light scattering. The electromagnetic near fields in the pencil of light are not uniform, have complicated patterns within short distances from the beam base, and the fields tend to converge to Fraunhofer diffraction fields far away from the base.

Far field diffraction↗
NASA NTRS2013

HCIT Contrast Performance Sensitivity Studies: Simulation Versus Experiment

Using NASA's High Contrast Imaging Testbed (HCIT) at the Jet Propulsion Laboratory, we have experimentally investigated the sensitivity of dark hole contrast in a Lyot coronagraph for the following factors: 1) Lateral and longitudinal translation of an occulting mask; 2) An opaque spot on the occulting mask; 3) Sizes of the controlled dark hole area. Also, we compared the measured results with simulations obtained using both MACOS (Modeling and Analysis for Controlled Optical Systems) and PROPER optical analysis programs with full three-dimensional near-field diffraction analysis to model HCIT's optical train and coronagraph.

space telescopes↗
DOE OSTI2022

Strong Induced Circular Dichroism in a Hybrid Lead‐Halide Semiconductor Using Chiral Amino Acids for Crystallite Surface Functionalization

Abstract Chirality is a desired property in functional semiconductors for optoelectronic, catalytic, and spintronic applications. Here, introducing enantiomerically‐pure 3‐aminobutyric acid (3‐ABA) into thin films of the 1D semiconductor dimethylammonium lead iodide (DMAPbI 3 ) is found to result in strong circular dichroism (CD) in the optical absorption. X‐ray diffraction and grazing incidence small angle X‐ray scattering (GISAXS) are applied to gain molecular‐scale insights into the chirality transfer mechanism, which is attributed to a chiral surface modification of DMAPbI 3 crystallites. This study demonstrates that the CD signal strength can be controlled by the amino‐acid content relative to the crystallite surface area. The CD intensity is tuned by the composition of the precursor solution and the spin‐coating time, thereby achieving anisotropy factors ( g abs ) as high as 1.75 × 10 –2 . Grazing incidence wide angle scattering reveals strong preferential ordering that can be suppressed via tailored synthesis conditions. Different contributions to the chiroptical properties are resolved by a detailed analysis of the CD signal utilizing an approach based on the Mueller matrix model. This report of a novel class of chiral hybrid semiconductors with precise control over their optical activity presents a promising approach for the design of circularly polarized light detectors and emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Poster — Thur Eve — 18: Cherenkov Emission By High-Energy Radiation Therapy Beams: A Characterization Study

We investigate Cherenkov emission (CE) by radiotherapy beams via radiation dose-versus-CE correlation analyses, CE detection optimization by means of a spectral shift towards the near-infrared (NIR) window of biological tissue, and comparison of CE to on-board MV imaging. Dose-CE correlation was investigated via simulation and experiment. A Monte Carlo (MC) CE simulator was designed using Geant4. Experimental phantoms include: water; tissue-simulating phantom composed of water, Intralipid®, and beef blood; plastic phantom with solid water insert. The detector system comprises an optical fiber and diffraction-grating spectrometer incorporating a front/back-illuminated CCD. The NIR shift was carried out with CdSe/ZnS quantum dots (QDs), emitting at (650±10) nm. CE and MV images were acquired with a CMOS camera and electronic portal imaging device. MC and experimental studies indicate a strong linear dose-CE correlation (Pearson coefficient > 0.99). CE by an 18-MeV beam was effectively NIR-shifted in water and a tissue-simulating phantom, exhibiting a significant increase at 650 nm for QD depths up to 10 mm. CE images exhibited relative contrast superior to MV images by a factor of 30. Our work supports the potential for application of CE in radiotherapy online imaging for patient setup and treatment verification, since CE is intrinsic to the beam and non-ionizing and QDs can be used to improve CE detectability, potentially yielding image quality superior to MV imaging for the case of low-density-variability, low-optical-attenuation materials (ex: breast/oropharynx). Ongoing work involves microenvironment functionalization of QDs and application of multi-channel spectrometry for simultaneous acquisition of dosimetric and tumor oxygenation signals.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS2006

Phase Sensor for Aligning a Segmented Telescope Mirror

A phase sensor has been developed for use in aligning a segmented telescope mirror to within a fraction of a wavelength in piston. (As used here, piston signifies displacement of a mirror segment along the optical axis of the telescope.) Such precise alignment is necessary in order to realize the full benefit of the large aperture achievable through segmentation. This phase sensor is achromatic. It is based on two-wavelength shearing interferometry, and can be modified to utilize an extended or broad-band (e.g., white) light source. The sensor optics include a ruled diffraction grating and an imaging lens. The sensor can measure the piston shift between segments as well as aberrations of the segments. It can measure the surface error of an individual segment, making it possible to compensate for the error with optimal amount(s) of piston and/or tilt. The precise capture range of the sensor depends partly on the telescope design; the largest relative piston shifts measurable by use of this sensor are of the order of 100 m. The accuracy of the sensor also depends partly on the telescope design; in general, the accuracy is sufficient to enable alignment to within approximately half a wavelength. The interferometric image is digitized and processed by a simple algorithm in real time, and the output of the algorithm can be used to maintain alignment in real time, even in the presence of atmospheric turbulence. The sensor is robust. Through calibration, it can be made insensitive to (and, hence, tolerant of) misalignments and aberrations of its own optics, most aberrations of the telescope as a whole (in contradistinction to aberrations of individual segments), and most aberrations introduced by atmospheric turbulence

Stahl, Philip↗
DOE OSTI2022

Mid- to Far-Infrared Anisotropic Dielectric Function of HfS 2 and HfSe 2

The far-infrared (far-IR) remains a relatively underexplored region of the electromagnetic spectrum extending roughly from 20 to 100 µm in free-space wavelength. Research within this range has been restricted due to a lack of optical materials that can be optimized to reduce losses and increase sensitivity, as well as by the long free-space wavelengths associated with this spectral region. Here the exceptionally broad Reststrahlen bands of two Hf-based transition metal dichalcogenides (TMDs) that can support surface phonon polaritons (SPhPs) within the mid-infrared (mid-IR) into the terahertz (THz) are reported. In this vein, the IR transmission and reflectance spectra of hafnium disulfide (HfS 2 ) and hafnium diselenide (HfSe 2 ) flakes are measured and their corresponding dielectric functions are extracted. These exceptionally broad Reststrahlen bands (HfS 2 : 165 cm -1 ; HfSe 2 : 95 cm -1 ) dramatically exceed that of the more commonly explored molybdenum- (Mo) and tungsten- (W) based TMDs (≈5–10 cm -1 ), which results from the over sevenfold increase in the Born effective charge of the Hf-containing compounds. Further, this work therefore identifies a class of materials for nanophotonic and sensing applications in the mid- to far-IR, such as deeply sub-diffractional hyperbolic and polaritonic optical antennas, as is predicted via electromagnetic simulations using the extracted dielectric function.

36 MATERIALS SCIENCE↗
DOE OSTI2014

TH-C-17A-04: Shining Light On the Implementation of Cherenkov Emission in Radiation Therapy

Purpose: We hypothesize that Cherenkov emission (CE) by radiotherapy beams is correlated with radiation dose, CE detection can be maximized by a spectral shift towards the near-infrared (NIR) window of biological tissue, and in certain tissue types (ex. breast/oropharynx), it could prove superior to mega-voltage (MV) imaging. Therefore, we compare CE imaging to onboard MV imaging. Methods: Dose-CE correlation was investigated via simulation and experiment. A Monte Carlo (MC) CE simulator was designed using Geant4. Experimental phantoms include: water; tissuesimulating phantom composed of water, fat emulsion, and beef blood; plastic phantom with solid water insert. The optical spectrometry system consisted of a multi-mode optical fiber and diffraction-grating spectrometer incorporating a front/back-illuminated charge-coupled device (CCD). CdSe/ZnS quantum dots (QDs), emitting at (650±10) nm, were used to achieve NIR shift of the CE signal. CE and MV images were acquired with a complementary metal-oxide-semiconductor (CMOS) camera and an electronic portal imaging device (EPID), respectively. Results: MC and experimental studies indicate a strong linear correlation between radiation dose and CE (Pearson coefficient > 0.99). CE by an 18 MeV beam was effectively shifted towards the NIR in water and in a tissue-simulating phantom, exhibiting a 50% increase at 650 nm for QD depths of ∼3 mm. CE images exhibited relative contrast superior to EPID images by a factor of 30. Conclusion: Our work supports the potential for application of CE in radiotherapy online imaging for patient setup and treatment verification, since CE is intrinsic to the beam and non-ionizing, and QDs can be used to improve CE detectability, yielding image quality superior to MV imaging for the case of low density variability, low optical attenuation materials, such as breast or oropharyngeal cavities. Ongoing work involves microenvironment functionalization of QDs and application of multichannel spectrometry for simultaneous acquisition of dosimetric and tumor oxygenation signals. Funding received from the following organizations: Natural Sciences and Engineering Research Council of Canada, McGill University. YZ acknowledges partial support by the CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council (Grant number: 432290)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2016

Monazite-type SrCr O 4 under compression

We report a high-pressure study of monoclinic monazite-type SrCrO 4 up to 26 GPa. Therein we combined x-ray diffraction, Raman, and optical-absorption measurements with ab initio calculations, to find a pressure-induced structural phase transition of SrCrO 4 near 8-9 GPa. Evidence of a second phase transition was observed at 10-13 GPa. The crystal structures of the high-pressure phases were assigned to the tetragonal scheelite-type and monoclinic AgMnO 4 -type structures. Both transitions produce drastic changes in the electronic band gap and phonon spectrum of SrCrO 4 . We determined the pressure evolution of the band gap for the low- and high-pressure phases as well as the frequencies and pressure dependencies of the Raman-active modes. In all three phases most Raman modes harden under compression, however the presence of low-frequency modes which gradually soften is also detected. In monazite-type SrCrO 4 , the band gap blueshifts under compression, but the transition to the scheelite phase causes an abrupt decrease of the band gap in SrCrO 4 . Calculations showed good agreement with experiments and were used to better understand the experimental results. From x-ray-diffraction studies and calculations we determined the pressure dependence of the unit-cell parameters of the different phases and their ambient-temperature equations of state. The results are compared with the high-pressure behavior of other monazites, in particular PbCrO 4 . A comparison of the high-pressure behavior of the electronic properties of SrCrO 4 (SrWO 4 ) and PbCrO 4 (PbWO 4 ) will also be made. Lastly, the possible occurrence of a third structural phase transition is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Multiscale mechanical behavior and microstructure evolution of extruded magnesium alloy sheets: Experimental and crystal plasticity analysis

Highlights: • Experimental stress-strain responses were reproduced by CPFE simulation based on Voronoi grains on three strain paths. • Textures predicted by simulation were in accordance with the ones measured by EBSD at the strain of 0.085. • Deformation heterogeneity in slip-dominated cases was found more significant than that in twin-favored case. • For slip-dominated cases, both high m′ value and high SFs in adjacent grains are responsible for strain localization. - Abstract: A phenomenological crystal plasticity finite element (CPFE) model based on Voronoi grains was applied to reproduce basic deformation features of a hot-extruded magnesium alloy sheet under various strain paths. Corresponding experimental investigations, including mechanical tests, electron back scattered diffraction (EBSD) measurements and optical observation, were also carried out as either a validation or a supplement of the numerical results. Predicted average stress-strain responses and texture evolution are in good accordance with measured ones. Furthermore, deformation heterogeneity at the mesoscopic and intergranular scale were investigated based on the proposed model. At the mesoscale, the heterogeneity in the slip-dominated cases tends to develop continuously, whereas the heterogeneity is retarded in twin-favored deformation. At the intergranular scale, it is concluded from the slip-dominated case that a high slip-transfer parameter and high Schmid factors (SFs) of principal slip systems in adjacent grains could accommodate higher local strain.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Solution-based spin-coated tin sulfide thin films for photovoltaic and supercapacitor applications

Highlights: • Tin sulfide (SnS{sub x}) thin films were prepared by solution-based spin coating. • The SnS{sub x} films annealed at 500 °C exhibited a pure SnS phase. • The films exhibited direct band gap of 1.4 eV which is near to solar maximum. • The films with the pure SnS phase exhibited a specific capacitance of 42 F g{sup ―1}. - Abstract: In this study, tin sulfide (SnS{sub x}) thin films were prepared using a solution-based spin-coating method. The annealing temperature was observed to play a dominant role in determining the phase, crystallinity, and morphology of the SnS{sub x} thin films. The results obtained from X-ray diffraction, as well as optical and electrical measurements, revealed that the films annealed at 500 °C exhibit a pure SnS phase, with a carrier concentration and direct band gap of ∼10{sup 12} and 1.4 eV, respectively. To explore the applications of SnS in supercapacitors, electrochemical measurements were performed in a 0.2 M NaOH solution. The results indicated that films with a pure SnS phase have a high specific capacitance of 42 F g{sup ―1} at a current density of 2 A g{sup ―1}. The synthesized SnS thin films demonstrate potential for applications in electrochemical capacitors and solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Compound Meta-Optics for Complete and Loss-Less Field Control

Optical metasurfaces offer a compact platform for manipulation of the amplitude, phase, and polarization state of light. Independent control over these properties, however, is hindered by the symmetric transmission matrix associated with single-layer metasurfaces. Here, we utilize multilayer birefringent meta-optics to realize high-efficiency, independent control over the amplitude, phase, and polarization state of light. In this work, high-efficiency control is enabled by redistributing the wavefront between cascaded metasurfaces, while end-to-end inverse design is used to realize independent complex-valued functions for orthogonal polarization states. Based on this platform, we demonstrate spatial mode division multiplexing, optical mode conversion, and universal vectorial holograms, all with diffraction efficiencies over 80%. This meta-optic platform expands the design space of flat optics and could lead to advances in optical communications, quantum entanglement, and information encryption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Extending geometrical optics: A Lagrangian theory for vector waves

Even when neglecting diffraction effects, the well-known equations of geometrical optics (GO) are not entirely accurate. Traditional GO treats wave rays as classical particles, which are completely described by their coordinates and momenta, but vector-wave rays have another degree of freedom, namely, their polarization. The polarization degree of freedom manifests itself as an effective (classical) “wave spin” that can be assigned to rays and can affect the wave dynamics accordingly. A well-known manifestation of polarization dynamics is mode conversion, which is the linear exchange of quanta between different wave modes and can be interpreted as a rotation of the wave spin. Another, less-known polarization effect is the polarization-driven bending of ray trajectories. Here, this work presents an extension and reformulation of GO as a first-principle Lagrangian theory, whose effective Hamiltonian governs the aforementioned polarization phenomena simultaneously. As an example, the theory is applied to describe the polarization-driven divergence of right-hand and left-hand circularly polarized electromagnetic waves in weakly magnetized plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Efficient modeling of Bragg coherent x-ray nanobeam diffraction

X-ray Bragg diffraction experiments that utilize tightly focused coherent beams produce complicated Bragg diffraction patterns that depend on scattering geometry, characteristics of the sample, and properties of the x-ray focusing optic. In this paper, we use a Fourier-transform-based method of modeling the 2D intensity distribution of a Bragg peak and apply it to the case of thin films illuminated with a Fresnel zone plate in three different Bragg scattering geometries. Finally, the calculations agree well with experimental coherent diffraction patterns, demonstrating that nanodiffraction patterns can be modeled at nonsymmetric Bragg conditions with this approach—a capability critical for advancing nanofocused x-ray diffraction microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Effects of Ce additions on the age hardening response of Mg–Zn alloys

The effects of Ce additions on the precipitation hardening behaviour of Mg–Zn are examined for a series of alloys, with Ce additions at both alloying and microalloying levels. The alloys are artificially aged, and studied using hardness measurement and X-ray diffraction, as well as optical and transmission electron microscopy. It is found that the age-hardening effect is driven by the formation of fine precipitates, the number density of which is related to the Zn content of the alloy. Conversely, the Ce content is found to slightly reduce hardening. When the alloy content of Ce is high, large secondary phase particles containing both Ce and Zn are present, and remain stable during solutionizing. These particles effectively reduce the amount of Zn available as solute for precipitation, and thereby reduce hardening. Combining hardness results with thermodynamic analysis of alloy solute levels also suggests that Ce can have a negative effect on hardening when present as solutes at the onset of ageing. This effect is confirmed by designing a pre-ageing heat treatment to preferentially remove Ce solutes, which is found to restore the hardening capability of an Mg–Zn–Ce alloy to the level of the Ce-free alloy. - Highlights: • The effects of Ce additions on precipitation in Mg–Zn alloys are examined. • Additions of Ce to Mg–Zn slightly reduce the age-hardening response. • Ce-rich secondary phase particles deplete the matrix of Zn solute. • Hardening is also decreased when Ce is present in solution. • Pre-ageing to preferentially precipitate out Ce restores hardening capabilities.

36 MATERIALS SCIENCE↗
NASA NTRS1987

RCS of a coated circular waveguide terminated by a perfect conductor

The radar cross section (RCS) of a circular waveguide terminated by a perfect electric conductor is calculated by the geometrical theory of diffraction for the rim diffraction and by a physical optics approximation for the interior irradiation. The interior irradiation is generally more than 10 dB higher than the rim diffraction for a/lambda equal to or greater than 1 (a is the waveguide radius, lambda is the free-space wavelength). At low frequencies (a/lambda about 1), the interior irradiation can be significantly reduced over a broad range of incident angle if the interior waveguide wall is coated with a thin layer (1 percent of the radius) of lossy magnetic material. Our theoretical prediction is confirmed by measurements. At higher frequencies (a/lambda about 3), a thin layer of coating is effective for the case of near axial incidence, provided that a good transition of the TE(11) mode near the waveguide opening to the HE(11) mode inside the waveguide is made. A thicker layer of coating is required for the RCS reduction over wider incident angle.

Lee, Choon S.↗
DOE OSTI2014

First light of the Gemini Planet Imager

The Gemini Planet Imager is a dedicated facility for directly imaging and spectroscopically characterizing extrasolar planets. It combines a very high-order adaptive optics system, a diffraction-suppressing coronagraph, and an integral field spectrograph with low spectral resolution but high spatial resolution. Every aspect of the Gemini Planet Imager has been tuned for maximum sensitivity to faint planets near bright stars. During first-light observations, we achieved an estimated H band Strehl ratio of 0.89 and a 5-σ contrast of 10 6 at 0.75 arcseconds and 10 5 at 0.35 arcseconds. Observations of Beta Pictoris clearly detect the planet, Beta Pictoris b, in a single 60-s exposure with minimal postprocessing. Beta Pictoris b is observed at a separation of 434 ± 6 milliarcseconds (mas) and position angle 211.8 ± 0.5°. Fitting the Keplerian orbit of Beta Pic b using the new position together with previous astrometry gives a factor of 3 improvement in most parameters over previous solutions. The planet orbits at a semimajor axis of 9.0 +0.8 –0.4 AU near the 3:2 resonance with the previously known 6-AU asteroidal belt and is aligned with the inner warped disk. In conclusion, the observations give a 4% probability of a transit of the planet in late 2017.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Optical smoothing of laser imprinting in planar-target experiments on OMEGA EP using multi-FM 1-D smoothing by spectral dispersion

Direct-drive ignition on the National Ignition Facility (NIF) requires single-beam smoothing to minimize imprinting of laser nonuniformities that can negatively affect implosion performance. One-dimensional, multi-FM smoothing by spectral dispersion (SSD) has been proposed to provide the required smoothing [Marozas et al., Bull. Am. Phys. Soc. 55, 294 (2010)]. A prototype multi-FM SSD system has been integrated into the NIF-like beamline of the OMEGA EP Laser System. Experiments have been performed to verify the smoothing performance by measuring Rayleigh–Taylor growth rates in planar targets of laser-imprinted and preimposed surface modulations. Multi-FM 1-D SSD has been observed to reduce imprint levels by ∼50% compared to the nominal OMEGA EP SSD system. The experimental results are in agreement with 2-D DRACO simulations using realistic, time-dependent far-field spot-intensity calculations that emulate the effect of SSD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗