Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Angle-resolved polarized Raman spectroscopy study of phosphorene nanoribbons

We present a systematic angle-resolved polarized Raman spectroscopy (ARPRS) study of black phosphorus (BP) nanostructures formed via electrochemical sodium- and lithium-ion intercalation. Sodium intercalation leads to bundles of densely packed, highly uniform phosphorene nanoribbons (PNRs) separated by parallel amorphous channels, whereas lithium intercalation results in shorter, irregular nanoribbon-like segments with lower aspect ratios. In both cases, six additional Raman peaks (P1–P6) appear alongside the three primary Raman-active modes of BP (A$^{1}_{g}$, B 2g , and A$^{2}_{g}$). These peaks are attributed to the amorphous regions, as confirmed by their isotropic angular dependence in ARPRS measurements. The three BP modes show pronounced angular variations that differ significantly between the two intercalated samples. In sodium-intercalated BP, A$^{1}_{g}$ and A$^{2}_{g}$ modes retain a dumbbell-like angular dependence under parallel polarization with enhanced anisotropy and reduced symmetry under crossed polarization. At the same time, the B 2g mode transitions from four-lobed (cloverleaf) polar plot to a butterfly-like one. In contrast, lithium-intercalated BP exhibits weaker anisotropy and less distinct angular polar plots for all three modes. These differences reflect the sensitivity of phonon behavior to underlying nanostructure morphology. The vibrational frequencies density of states (FDOS) calculations attribute the B 2g mode transformation to phonon band folding and mode mixing in PNRs. This study demonstrates the power of ARPRS in probing phonon-structure relationships and highlights the influence of edge geometry and quantum confinement on phonon dispersion in PNRs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Integrating Cybersecurity with System Operations and Restoration

This presentation covers the interaction of the discipline of system operations with the discipline of cybersecurity. First, a common mental model for risk - both cybersecurity and all-hazards - is presented, followed by a discussion of high-level management strategies for different kinds of cyber harm facing system operators, based on the consequences and frequencies of the harm. The next section covers the importance of cybersecurity for a system operator organization and explains some general concepts to understand the relationships. Finally the role of system operators in the security of the grid as a larger system of systems is discussed over the framework of a resilience event.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Spin-based detection of terahertz and sub-terahertz electromagnetic radiation

Systems and methods for spin-based detection of electromagnetic radiation at terahertz and sub-terahertz frequencies is provided. The detector can include a heterostructure, a magnetic field generator, and an electrical circuit. The heterostructure can include a first layer formed of an antiferromagnetic material (AFM) in contact with a second layer of a heavy metal (HM) or a topological insulator. The magnetic field generator can generate a magnetic field oriented approximately parallel to an easy axis of the first layer and approximately parallel to a propagation direction of electromagnetic radiation. The circuit can be in electrical communication with the second layer. The first layer can inject a spin current into the second layer in response to receipt of electromagnetic radiation having a sub-terahertz or terahertz frequency. The second layer can convert the injected spin current into a potential difference. The circuit can be configured to output a signal corresponding to the potential difference.

Shi, Jing↗
DOE OSTI2024

Solar Farm’s Microclimates Effects: Predicting Abundance and Visiting Frequency of Pollinators

The solar farm is garnering attention for its contribution to ecosystem services, particularly in supporting pollinators. Although numerous studies have focused on the distinct microclimates of solar farms, there has been limited effort to validate and model the impact of these conditions on insects [1]. To effectively evaluate and leverage the ecosystem services from solar farms in policymaking, understanding how insects react to microclimate variations in diverse designs and management methods is essential. This study aims to validate and model the impact of temperature and shade at solar farms on pollinator populations and their frequency of pollination as well as compare the potential for increased pollination under different types of panels within a solar grazing setup.

Chung, Hyun Yong↗
DOE OSTI2020

Importance learning estimator for the site-averaged turnover frequency of a disordered solid catalyst

For disordered catalysts such as atomically dispersed “single-atom” metals on amorphous silica, the active sites inherit different properties from their quenched-disordered local environments. The observed kinetics are site-averages, typically dominated by a small fraction of highly active sites. Standard sampling methods require expensive ab initio calculations at an intractable number of sites to converge on the siteaveraged kinetics. We present a new method that efficiently estimates the site-averaged turnover frequency (TOF). The new estimator uses the same importance learning algorithm [Vandervelden et al., React. Chem. Eng. 5, 77 (2020)] that we previously used to compute the siteaveraged activation energy. We demonstrate the method by computing the site-averaged TOF for a simple disordered lattice model of an amorphous catalyst. The results show that with the importance learning algorithm, the site-averaged TOF and activation energy can now be obtained concurrently with orders of magnitude reduction in required ab initio calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrical Submersible Pumps: A System Modeling Approach for Power Quality Analysis With Variable Frequency Drives

This article proposes a high-level engineering guide to develop an integrated system model for power quality analysis in electrical submersible pump (ESP) applications with variable frequency drives (VFDs). Such analyses are troublesome in the industry due to the complexity of these systems. In this article, simple steps to perform system integration analyses of such arrangements, including torsional analysis, are developed. A simplified VFD-ESP model suitable for coupled electrical and mechanical analysis in steady state is proposed in all their configurations of practical interest. Such a model can be easily implemented in common simulation software, significantly reducing engineering efforts for implementation and analysis. The focus of the proposed model is the prediction of ESP failures that might result from a poor power quality caused by VFDs. Analytical expressions of different types of harmonics in these systems, as well as their accurate locations in the frequency domain, including their interharmonics and common-mode harmonics, are derived for this purpose. Further, the effectiveness of the proposed model is verified through offline and real-time hybrid simulation results. Finally, a comparison between simulation results obtained using the proposed model and measurements collected on a down-scale laboratory prototype is carried out to demonstrate the accuracy of the suggested modeling approach.

42 ENGINEERING↗
DOE OSTI2022

Selective Heating Through Y-Junction Waveguide Designed by Acoustic Shape Optimization

Unlike phononic crystals or systems designed by topology optimization, waveguides designed by shape optimization do not have voids or internal defects, making the fabrication process more suitable for additive manufacturing. By designing a Y-junction waveguide through shape optimization, an ultrasonic wave can be controlled so that it propagates to a predetermined location just by adjusting its frequency. These demultiplexed ultrasonic waves can be used to transport signals or stimulate nearby materials. As an example, the ultrasonic wave is converted to heat at different locations, which can be applied to mechanisms that can take advantage of heating. First, shape optimization is performed on a cylindrical structure to selectively propagate ultrasonic waves of a particular frequency while attenuating others, which is analyzed through a finite element model. The numerical study results are compared with experimental measurements from samples fabricated through additive manufacturing methods. After verifying the concept, the Y-junction waveguide is fabricated to demultiplex the wave and selectively heat different locations. Here the results show that the method of combining shape optimization with additive manufacturing is exceptionally simple and capable of demultiplexing ultrasonic waves, which can replace complex electrical components with single-material waveguides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Q-band frequency tunable Doppler backscattering (DBS) system for pedestal and scrape-off layer density fluctuation and flow measurements in the DIII-D tokamak

We present the design and laboratory tests for a new Q-band frequency tunable Doppler backscattering (DBS) system suitable for probing poloidal wavenumber kñ = 6–8 cm−1 density fluctuations and their flow velocities in the pedestal and scape-off layer (SOL) of the DIII-D tokamak. This system will provide new measurements in the increasingly important and under-diagnosed far pedestal and SOL plasma regions. These results are important for experimental transport studies and necessary for the validation of transport models, both of which are important to fusion energy research. The use of a single tunable frequency reduces the complexity and potential failure points as compared to a multichannel system. This new system utilizes a 33–50 GHz tunable source and will be integrated into the current V-band DBS in DIII-D using a broadband Q- and V-band multiplexer. A full-scale mockup of the quasi-optical system was used to test and optimize the performance. These tests include beam profile measurements at different distances (and angles) from a paraboloidal focusing and steering mirror. The measurements cover the full frequency range 33–75 GHz of the integrated/combined Q–V band DBS system and target a large radial coverage of the low-field side of the plasma from ρ = 1.1 to ρ = 0.5, where ρ is the normalized flux surface radial coordinate.

Instruments & Instrumentation↗
DOE OSTI2021

Evaluation of idealized large-eddy simulations performed with the Weather Research and Forecasting model using turbulence measurements from a 250 m meteorological mast

Abstract. We investigate the ability of the Weather Research and Forecasting model to perform large-eddy simulation of canonical flows. This is achieved through comparison of the simulation outputs with measurements from sonic anemometers on a 250 m meteorological mast located at Østerild, in northern Denmark. Østerild is on a flat and rough area, and for the predominant wind directions, the atmospheric flow can be considered to be close to homogeneous. The idealized simulated flows aim at representing atmospheric boundary layer turbulence under unstable, neutral, and stable stability conditions at the surface, which are statistically significant conditions observed at Østerild. We found that the resolved fields from the simulations appear to have the characteristics of the three stability regimes. Vertical profiles of observed mean wind speeds and direction are well reproduced by the simulations, with the largest differences under near-neutral conditions, where the effect of the subgrid-scale model is evident on the vertical wind shear close to the surface. Vertical profiles of observed eddy fluxes are also well reproduced by the simulations, with the largest differences for the three velocity component variances under stable stability conditions, although nearly always within the observed variability. With regards to turbulent kinetic energy, we find good agreement between observations and simulations at all vertical levels. Simulated and observed velocity spectra match very well and show very similar behavior with height and with atmospheric stability within the low-frequency interval; at the effective resolution, the simulated spectra show the typical drop-off of finite differences. Our findings demonstrate that these idealized simulations reproduce the characteristics of atmospheric stability regimes often observed at a high turbulent and flat site within a direction sector, where the air flows over nearly homogeneous land.

17 WIND ENERGY↗
DOE OSTI2023

Analysis of direct and indirect noise in a next-generation aviation gas turbine combustor

A large-eddy simulation (LES) of a next-generation combustor is performed to examine effects of this combustor concepts on direct and indirect combustion noise characteristics. Direct noise is computed considering the unsteady heat release predictions while entropy fluctuations in the downstream part of the combustor are used to estimate indirect noise through the transfer function of the outlet nozzle. A low-order acoustic reconstruction technique, which utilizes the Green’s function of the configuration, is developed to compute the acoustics inside the combustor. Comparisons to experimental results are reported, showing the reasonable accuracy of the LES and combustion noise computations. The direct noise spectrum peaks at frequencies around 3 kHz because of the fast timescales associated with the chemical reactions inside the combustor. In addition, the indirect noise is dominant at low frequencies, i.e., less than 400 Hz, because of the characteristics of the entropy spectrum at the outlet nozzle. Further, compared to a conventional rich-quench-lean (RQL) combustor configuration, significant differences in the acoustics are observed, and are explained by two specific technological novelties. Firstly, the direct noise spectrum peaks at significantly higher frequencies due to the combustor’s compactness. Secondly, the entropy inhomogeneties downstream of the combustion region are an order of magnitude smaller in amplitude due to the lack of dilution with cold air. This leads to a significant reduction in the indirect noise amplitude at low frequencies, where it is the dominant source of noise. These results suggest opportunities for advanced combustion technologies to achieve substantial reductions in combustion-related noise.

42 ENGINEERING↗
DOE OSTI2020

OC6 Phase I: Investigating the underprediction of low-frequency hydrodynamic loads and responses of a floating wind turbine

Phase I of the OC6 project is focused on examining why offshore wind design tools underpredict the response (loads/motion) of the OC5-DeepCwind semisubmersible at its surge and pitch natural frequencies. Previous investigations showed that the underprediction was primarily related to nonlinear hydrodynamic loading, so two new validation campaigns were performed to separately examine the different hydrodynamic load components. In this paper, we validate a variety of tools against this new test data, focusing on the ability to accurately model the low-frequency loads on a semisubmersible floater when held fixed under wave excitation and when forced to oscillate in the surge direction. However, it is observed that models providing better load predictions in these two scenarios do not necessarily produce a more accurate motion response in a moored configuration.

17 WIND ENERGY↗
DOE OSTI2022

Fluid and hybrid simulations of the ionization instabilities in Hall thruster

Low-frequency axial oscillations in the range of 5–50 kHz stand out as a pervasive feature observed in many types of Hall thrusters. While it is widely recognized that the ionization effects play the central role in this mode, as manifested via the large-scale oscillations of neutral and plasma density, the exact mechanism(s) of the instabilities remain unclear. To gain further insight into the physics of the breathing mode and evaluate the role of kinetic effects, a one-dimensional time-dependent full nonlinear low-frequency model describing neutral atoms, ions, and electrons is developed in full fluid formulation and compared to the hybrid model in which the ions and neutrals are kinetic. Both models are quasi-neutral and share the same electron fluid equations that include the electron diffusion, mobility across the magnetic field, and the electron energy evolution. The ionization models are also similar in both approaches. Further, the predictions of fluid and hybrid simulations are compared for different test cases. Two main regimes are identified in both models: one with pure low-frequency behavior and the other one, where the low-frequency oscillations coexist with high-frequency oscillations in the range of 100–200 kHz, with the characteristic time scale of the ion channel fly-by time, 100–200 kHz. The other test case demonstrates the effect of a finite temperature of injected neutral atoms, which has a substantial suppression effect on the oscillation amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Vibrational properties and thermal transport in quaternary chalcogenides: The case of Te-based compositions

Vibrational thermal properties of CuZn 2 InTe 4 , AgZn 2 InTe 4 , and Cu 2 CdSnTe 4 , derived from binary II-VI zinc-blendes, are reported based on first-principles calculations. While the chalcogenide atoms in these materials have the same lattice positions, the cation atom arrangements vary, resulting in different crystal symmetries and subsequent properties. The compositional differences have important effects on the vibrational thermal characteristics of the studied materials, which demonstrate that low-frequency optical phonons hybridize with acoustic phonons and lead to enhanced phonon-phonon scattering and low lattice thermal conductivities. The phonon density of states, mode Grüneisen parameters, and phonon scattering rates are also calculated, enabling deeper insight into the microscopic thermal conduction processes in these materials. Compositional variations drive differences among the three materials considered here; nonetheless, their structural similarities and generally low thermal conductivities (0.5–4 W/m K at room temperature) suggest that other similar II-VI zinc-blende derived materials will also exhibit similarly low values, as also corroborated by experimental data. Finally, this, combined with the versatility in designing a variety of motifs on the overall structure, makes quaternary chalcogenides interesting for thermal management and energy conversion applications that require low thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Characterization of Amplification Properties of the Superconducting-Ferromagnetic Transistor

Here we report on the measurement results of the superconducting-ferromagnetic transistors (SFTs). The devices were made at Northwestern University and Hypres (SeeQC), Inc. (Nevirkovets et al., 2014; 2015). SFT is a multiterminal device with the SIS'FIFS (or SFIFS'IS) structure (where S, I, and F denote a superconductor, an insulator, and a ferromagnetic material, respectively) exploiting intense quasiparticle injection in order to modify the nonlinear I-V curve of a superconducting tunnel junction. SFT is capable of providing voltage, current, and power amplification while having good input/output isolation. We characterized the devices using different measurement techniques. We measured S parameters of the single- and double-acceptor devices at frequencies up to 5 MHz. Importantly, we confirmed that the isolation between the input and output of the device is quite good. However, the techniques typically employed to characterize semiconductor devices do not allow for revealing the full potential of our low-resistive SFT devices, especially those having two acceptors. In the latter case, we also tested the devices using the battery-powered current sources with floating grounds. Analyzing double-acceptor I-V curves recorded at different levels of injection currents, for an optimal load, we deduced a small-signal voltage gain of 33 and a power gain of 2.4. We suggest that further improvement of the SFT device parameters is possible in optimized devices, so that the device potentially may serve as a preamplifier for readout of output signals of cryogenic detectors and be useful as an element of other superconductor-based circuits. In addition, we used scanning transmission electron microscopy to identify some problems in the fabrication of the devices without any planarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Triboelectric backgrounds to radio-based polar ultra-high energy neutrino (UHEN) experiments

Here, in the hopes of observing the highest-energy neutrinos (E EeV) populating the Universe, both past (RICE, AURA, ANITA) and current (RNO-G, ARIANNA, ARA and TAROGE-M) polar-sited experiments exploit the impulsive radio emission produced by neutrino interactions. In such experiments, rare single event candidates must be unambiguously identified above backgrounds. Background rejection strategies to date primarily target thermal noise fluctuations and also impulsive radio-frequency signals of anthropogenic origin. In this paper, we consider the possibility that ‘fake’ neutrino signals may also be generated naturally via the ‘triboelectric effect.’ This broadly describes any process in which force applied at a boundary layer results in displacement of surface charge, leading to the production of an electrostatic potential difference V. Wind blowing over granular surfaces such as snow can induce such a potential difference, with subsequent coronal discharge. Discharges over timescales as short as nanoseconds can then lead to radio-frequency emissions at characteristic MHz–GHz frequencies. Using data from various past (RICE, AURA, SATRA, ANITA) and current (RNO-G, ARIANNA and ARA) neutrino experiments, we find evidence for such backgrounds, which are generally characterized by: (a) a threshold wind velocity which likely depends on the experimental trigger criteria and layout; for the experiments considered herein, this value is typically $\mathscr{O}$(10 m/s), (b) frequency spectra generally shifted to the low-end of the frequency regime to which current radio experiments are typically sensitive (100–200 MHz), (c) for the strongest background signals, an apparent preference for discharges from above-surface structures, although the presence of more isotropic, lower amplitude triboelectric discharges cannot be excluded.

Background rejection↗
DOE OSTI2023

Controlling the propagation asymmetry of hyperbolic shear polaritons in beta-gallium oxide

Structural anisotropy in crystals is crucial for controlling light propagation, particularly in the infrared spectral regime where optical frequencies overlap with crystalline lattice resonances, enabling light-matter coupled quasiparticles called phonon polaritons (PhPs). Exploring PhPs in anisotropic materials like hBN and MoO 3 has led to advancements in light confinement and manipulation. In a recent study, PhPs in the monoclinic crystal β-Ga 2 O 3 (bGO) were shown to exhibit strongly asymmetric propagation with a frequency dispersive optical axis. Here, using scanning near-field optical microscopy (s-SNOM), we directly image the symmetry-broken propagation of hyperbolic shear polaritons in bGO. Further, we demonstrate the control and enhancement of shear-induced propagation asymmetry by varying the incident laser orientation and polariton momentum using different sizes of nano-antennas. Finally, we observe significant rotation of the hyperbola axis by changing the frequency of incident light. Our findings lay the groundwork for the widespread utilization and implementation of polaritons in low-symmetry crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Double echo symmetry-based REDOR and RESPDOR pulse sequences for proton detected measurements of heteronuclear dipolar coupling constants

1 H{X} symmetry-based rotational echo double resonance pulse sequences (S-REDOR) and symmetry-based rotational echo saturation pulse double resonance (S-RESPDOR) solid-state NMR experiments have found widespread application for 1 H detected measurements of difference NMR spectra, dipolar coupling constants, and internuclear distances under conditions of fast magic angle spinning (MAS). In these experiments the supercycled $\text{R4}^2_1 (\text{SR4}^2_1)$ symmetry-based recoupling pulse sequence is typically applied to the 1 H spins to reintroduce heteronuclear dipolar couplings. However, the timing of $\text{SR4}^2_1$ and other symmetry-based pulse sequences must be precisely synchronized with the rotation of the sample, otherwise, the evolution of 1 H CSA and other interactions will not be properly refocused. For this reason, significant distortions are often observed in experimental dipolar dephasing difference curves obtained with S-REDOR or S-RESPDOR pulse sequences. Here we introduce a family of double echo (DE) S-REDOR/S-RESPDOR pulse sequences that function in an analogous manner to the recently introduced $t_1$-noise eliminated (TONE) family of dipolar heteronuclear multiple quantum coherence (D-HMQC) pulse sequences. Through numerical simulations and experiments the DE S-REDOR/S-RESPDOR sequences are shown to provide dephasing difference curves similar to those obtained with S-REDOR/S-RESPDOR. However, the DE sequences are more robust to the deviations of the MAS frequency from the ideal value that occurs during typical solid-state NMR experiments. In this work, the DE sequences are shown to provide more reliable 1 H detected dipolar dephasing difference curves for nuclei such as 15 N (with isotopic labelling), 183 W and 35 Cl. The double echo sequences are therefore recommended to be used in place of conventional S-REDOR/S-RESPDOR sequences for measurement of weak dipolar coupling constants and long-range distances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Barkas effect in strongly magnetized plasmas

Strongly magnetized plasmas, which are characterized by the particle gyrofrequency exceeding the plasma frequency, exhibit novel transport properties. For example, recent work showed that the friction force on a test charge moving through a strongly magnetized plasma not only consists of the typical stopping power component but also includes components perpendicular to the test charge's velocity. However, these studies only considered test charges that have the same sign as the charge of the plasma particles. Here, we extend these calculations to the case of charges with opposite signs (such as an ion interacting with strongly magnetized electrons). This is done with both a novel generalized Boltzmann kinetic theory and molecular dynamics simulations. It is found that the friction force changes dramatically depending on the sign of the interacting charges. Likewise, the stopping power component for oppositely charged particles decreases in magnitude compared with like-charged particles, and the perpendicular components increase in magnitude. Moreover, the difference between the two cases increases as the gyrofrequency becomes larger compared with the plasma frequency. Finally, the electrical resistivity is calculated from the friction force, where it is found that strong magnetization in conjunction with oppositely charged interactions significantly decreases the parallel resistivity and increases the perpendicular resistivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗